OBIEE 11g migration: weblogic user cannot open a session in analytics

Similar Questions

• Cannot open a session in analytics if the user is not mapped to the BIAdministrators group

  Hello

  I created a new user, lets say 'abc '.

  The issue I'm facing is: for the 'abc' user, I traced only groups 'Author BI' and 'BI consumer' as I forced her to test the SPR where I didn't that correspond to the BIAdministrators group.

  With the above user, if I try to log in analytics, I get the below error message:

  An error occurred during authentication. Try again later or contact your system administrator.

  When I added BIAdministrators group through the console of the 'abc' user, I am able to connect successfully.

  Is the same for all users by default those too - weblogic etc.

  But when I tried the same steps (not to add BIAdministrators group to a user) in the system of my colleague, its working fine.

  Could someone help me with this problem.

  I also checked privileges section to manage both the system and there seems to be no change.

  Thank you

  Srikanth.

  I found the answer on my own. It seems that the role of the authenticated user is not having access to the object.

  Therefore, open the RPD-> right click-> properties-> change permissions for the authenticated user to read field

  Deploy the RPD now.

  Problem solved.

• Profile of user cannot open a session

  Hey, I tried to boot up my laptop and it wouldn't let me log on my user profile/account thing / whatever. Signature on another to create a new profile is impossible so I did not all the other user accounts on the computer. What can I do? is there something in addition to a restore of the entire system, or whatever? Ive had to do that like 4 times already for different problems. My operating system is vista. Help, please! Thank you!!!

  If you don't have another admin account, go intosafe mode.
  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and selectSafe Mode with network.

  In the window of logon in safe mode...
  1 can connect to your account administrator in safe mode?
  If so, do a restore system first, if no help, run theMicrosoft tutorial support listed below.

  2. If you can't log into your own account, you see another admin next to your account in the logon screen?
  If you do, that one is the built-in Administrator account. By default, there is no password. Connect to it and newdo a first system restore, if not help, run the Microsoft tutorial support listed below.

  If you are able to log on in safe mode, do a system restore. Choose a date when you were able to log in NORMAL MODE as your restore point.
  How to restore the system:
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Tutorial from Microsoft support :
  http://support.Microsoft.com/kb/947215
  There are several methods,go through one by one.
  Method 3 has a "fix it for me" application
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• administrator cannot open a session

  Administrator cannot open a session, each time I have enter password, returns, "THE service USER PROFILE SERVICE has no connection. User profile cannot be loaded. Help!

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot open a session

  I just start a new laptop and trying to get Outlook, Hotmail, I downloaded Live Essentials. In the context of that Skype has been installed. I already have it on my desk top so no not anything would be a problem.

  I am at the point of connection and when I used the same log-in under my desk, did not work. So clicked on password forgotten, changed. Tried to log in again, not good. Keeps asking for my Skype name. Have no idea what it is other than the login name or the name that appears at the top of the page on my desktop.

  No matter what I have / use, cannot open a session.

  Don't know what other information need. Give me an idea what to do.

  What exactly is the version of Skype installed on your laptop? In Skype goto help-> on Skype.

• l had express outlook XP with Firefox. cannot open a session to get or receive emails any ideas?

  Outlook express forum

  l had express outlook XP with Firefox.  cannot open a session to get or receive emails any ideas?
  As far as I KNOW, Hotmail has failed on OE for quite awhile.
  http://support.Microsoft.com/kb/878462
   
  For the best advice, Hotmail should ask in this dedicated forum.
   
  Windows Live Solution Center Hotmail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=1

• My CC icon, I cannot open a session.

  My CC icon, I cannot open a session. Says "Log In to continue" I connect with my credentials and he said "You have been logged Out", so I have everything again. It's a turning circle. Anyone else having this problem?  My connection works fine online.

  HELP PLEASE!

  Sign by sign in http://forums.adobe.com/thread/1450581?tstart=0 can help

  - and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html

  - and the "loopback" https://forums.adobe.com/thread/1504792

• Cannot open a session to the newly created user account

  I created a new standard user account via account management/accounts/user control.  When I log into the admin account and try to connect to the newly created account, I get the error message "the service user profile Service has no logon" "could not load user profile.  Click OK and it disconnects.  I can still log on to all the other 5 accounts that I created after I implemented this new laptop (preinstalled with windows 7).  When you click on a new account the first time, the system should establish the office and create the user records.

  I went into the Admin account and checking the application event log.  Event ID 1509 "Windows cannot copy file C:\Users\Default\ to the C:\Users\New Test Account\ location.  This error can be caused by insufficient security rights network problems. "DETAIL - access is denied.

  I solved my problem.  The index was at the event journal entry.  The permissions on the folder C:\Users\Default screwed up. (not sure how that happened).  I compared the authorization for this folder on my laptop win 7 with permissions for the same folder on my computer vista laptop.  Computer laptop win 7 has a few additional entries.  I deleted them and now I can create and open a session on new accounts on the laptop win 7.

• AMINISTRATOR CANNOT OPEN A SESSION

  As an administrator, I am unable to connect because of the message "the service user profile service has no log on." Unable to load the user profile.

  I tried to start in safe mode, but it will not do this, always arriving at the windows logo.

  I edit the registry but cannot take the step of renaming.

  I have tried system restore but no go.

  In short, any attempted that requires the administrator password is not allowed.

  Hi David,

  Thanks for posting your query in Microsoft Community.

  It's a shame that you can't sign in because of the error, and I appreciate the efforts made in the patches that you tried. However;

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 how to back up and restore the registry in Windows.

  Since none of the fixes that you tried, worked, I would ask you to refer following steps and check.

  Also I suggest you to activate the administrator account by default on your computer from WinRE and see if the problem is resolved.
   
  You must have the Windows 7 DVD, start the computer to Win from the elevated command prompt, you can follow these steps:
   
  1. use the DVD Windows 7 to start the computer from Windows Recovery (WinRE).
  2. in WinRE, open a command prompt. To do this, follow these steps:
  On the screen to install Windows, select the language to install, time and currency format and keyboard or input method options and then click Next.
  3. click on repair your computer.
  4. click on 7 installation you want to repair, and then click Next.
  5. click on command prompt.
  At the command prompt, type the following command and press ENTER:
  lusrmgr.msc in the online search and press enter

  NOTE: This file is located in C:\Windows\System32\lusrmgr.msc
  1. open the User Manager and local groups.
  2. in the left pane, click the users folder.
  3. in the middle pane, right click Administrator, and then click Properties.
  4. to activate the account administrator of Buit-in-
  (a) clear the account is disabled box.
  (b) proceed to step 6.
  5. to deactivate the account administrator of Buit-in-
  (a) check the account is disabled box.
  6. click on OK.
  7. close the windows local users and groups.
  8. close the session, and you will now see the built-in Administrator account log additional icon (active) or removed (disabled) to the log on screen.
   
  NOTE: Click on the Administrator icon to open a session the built-in Administrator account.
   
  Now of the foregoing provided steps that you need to check if you are able to solve the problem, if you are able to resolve the problem with the default Administrator account, then you must follow the step provided to create a new user account and check the question below.
   
  Create a new user profile.
   
  You must create a new user account and check the question of do you need to follow the steps below.
  a. open accounts to user by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, and then clicking user accounts.
  b. click Manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. click on create a new account.
  d. type the name that you want to assign to the user account, click an account type, and then click create an account.

  Look for the question, for additional on this issue references, you can consult the forum link provided below.
   
  IF you still experience the problem, you can follow the link provided below to fix the damaged user profile.

  Difficulty of a corrupted user profile

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Software Adobe reader tries to open my browser and other programs. Cannot open a session

  What I am trying to open displays a box saying software adobe reader adobe reader cannot open file. This happens even with my browser. I think somehow something has changed on my computer, but I can't understand. I go to my guest account and everything works fine.

  Executable file associations have been lost somehow. Assuming that. EXE (executable files) and. LNK (shortcut): download it. LNK and (if necessary). Difficulty of recording association EXE file types here:

  Difficulties of file Association for Windows 7:
  http://www.Winhelponline.com/blog/file-Asso-fixes-for-Windows-7/
   
  (FYI, the REG file is a file in plain text that you can open with Notepad, where you need to check its contents before the merger).

  How to display a warning Message When users try to edit Vista and LNK file Association in Windows 7:
  http://www.Winhelponline.com/blog/show-warning-modify-lnk-Association/

• 'Consumer IR Devices' does not not and cannot open a session

  Hey guys. I just bought a HP with windows 7 64 bit. I'm going to turn on and everything is ready a problem! my screen is all pixelated and when I go to open a session on my screen goes black and I have to force disable it. I booted up in safe mode and I went into Device Manager and saw that "consumer infrared devices" was a problem. I turned off and rebooted but still the same problem. I tried to update the driver, but still the same problem. can anyone understand this?

  Hi UglyCustomer.

  1. what HP model do you have?

  2 you have recently purchased the system, you have updated all the controllers? Any firmware?

  3 it seems you have a problem with infrared electromagnetic or CIR. He's probably the drivers.

  Thus, the best option will be to go to this site web http://welcome.hp.com/country/uk/en/support.html

  Type your model number and update all the drivers. Chipset Audio 2 1 3 Graphics 4 CIR.

  Good luck :)

  Span1shUk

• I for got my iam password cannot open a session now and in my system there that no other administrator accounts are available. How to connect

  I forgot my password iam unable to open a session now and in my system, there is that no other administrator accounts are available. How to connect

  I forgot my password iam unable to open a session now and in my system, there is that no other administrator accounts are available. How to connect

  As you go now, having a spare admin account is a very practical thing - if you think of it in advance. Fortunately, there are many other options built into Windows to help you out of this situation:
  • Restart the computer with your Windows repair CD, then use system restore to set Windows in a few days (only works if you have recently changed the password).
  • Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
  • Insert your flash drive USB with the password key file (only works if you have taken the time to create such a key file).
  • Use the password indicator (works only if you have created a hint and if it's good enough to allow you to guess the password)
  • Check your paper files (works only if you threw down the password somewhere)

• Cannot open a session in obiee 11g analytical page

  Hello

  I can't log into Obiee analytical page. And also when download repositories in em, I had so many errors. Please resolve these issues.

  Thanks in advance,

  A. Kay kumari.

  Error during extraction of data from the API of Population user of the Oracle BI Server user/group.

  Impossible to create a system for BI Server user connection during the execution of the requests of the user population

  ODBC driver returned an error (SQLDriverConnectW).

  MBean operation failed.

  Unexpected exception waiting for process to start: {0}. {1}

  [nQSError: 47030] Publication repository directory specified via REPOSITORY_PUBLISHING_DIRECTORY is a relative path.

  

  Your configuration does not match the error for some reason any. You only use a normal RPD in distributed mode and not in shared mode:

  http://docs.Oracle.com/CD/E14571_01/bi.1111/e10541/configrepos.htm#BIESG2890

  How do you REPOSITORY_PUBLISHING_DIRECTORY together? Have you changed it in the NQSConfig.ini? Is this a migrated environment 10g?

• 'Open in Chrome' Addon user cannot open certain websites

  Hello

  I just stumbled across this comment https://addons.mozilla.org/de/firefox/addon/open-with-google-chrome/reviews/727928/ associated with this https://addons.mozilla.org/de/firefox/addon/open-with-google-chrome/?src=hp-dl-upandcoming 'Up & Coming expansion'.
  This extension is 'upward and coming' made me suspicious and commentary, has confirmed that, for a certain user of firefox, some parts of the web seem to be broken. I know that there is already hacks on the way and delivered as a list hardcoded Web sites who happen to use a prefix of seller of css "webkit". But I was wondering if anyone here of SMO has an option for reaching out to this user for the information on the websites unsuable for him (or her)?
  There is no option for me to leave a direct response to the comment to AMO.

  Albert S. says

  Hello

  I just stumbled across this comment https://addons.mozilla.org/de/firefox/addon/open-with-google-chrome/reviews/727928/ associated with this https://addons.mozilla.org/de/firefox/addon/open-with-google-chrome/?src=hp-dl-upandcoming 'Up & Coming expansion'.
  This extension is 'upward and coming' made me suspicious and commentary, has confirmed that, for a certain user of firefox, some parts of the web seem to be broken. I know that there is already hacks on the way and delivered as a list hardcoded Web sites who happen to use a prefix of seller of css "webkit". But I was wondering if anyone here of SMO has an option for reaching out to this user for the information on the websites unsuable for him (or her)?
  There is no option for me to leave a direct response to the comment to AMO.

  I just contacted the developer and will hear back any time you want me private message you or update the thread

• Once connected to the account user, cannot open .xlsx or .docx documents but connected to another it works

  Why can't open .xlsx or .docx as a user documents but I created a new user, and there is no problem?  I have win xp pro and office 2007.  The documents in question are on a network storage device.  I'm leaning towards a permissions problem, but don't know how to solve.  The two users are administrators.

  I found the solution to this.  Under C:\Documents and Settings\ (your user account) \Local Data\Microsoft\Credentials\ (user account number), there is a class named powers with no link.  I sent to the trash before removing completely and tried to open documents.  It worked!  I now have access to documents, xlsx and docx everywhere where they are stored.