OBIEE - limiting projects users to MÜDE

Similar Questions

• I changed my account from administrator to a limited account user, now I can't login as administrator

  I changed my account from administrator to a limited account user, as I had 2 accounts of users, two administrator accounts. Now I can't login as administrator. I can't find the administrator and any other accounts show that when I try to switch users.

  If you have seen that the users you listed: that's all nothing.  If your account was listed as an administrator, then it is what it is.  It does not change when you restart the system.  ;-)

  Initially, you said that you have CHANGED your limited user account:

  I changed my account from administrator to a limited account user, as I had 2 accounts of users, two administrator accounts.

  Given that, you didn't have and still two active accounts.  If your account is displayed in Mode safe (when you connect as built-in administrator) as an administrative level account - it still is.

  Was able to go in the control group/user accounts. He was the administrator, my account administrator and one guest account haven't turned on do not.

  Information about Windows XP HOME Edition and the built-in Administrator account:
  http://WindowsXP.MVPs.org/Admins.htm
  (... and how you can make it visible in normal mode again - the reason for which it automatically logs in has two components.  (1) you have no password on 'your account' and 2) you have two directors and so integrated is hidden).

  Try this (in normal mode).

  Start button--> RUN
  OR
  'Windows key' + R

  Type:

  cmd /k net localgroup administrators

  It should bring up a prompt with information.  What is listed under the:

  Members
  --------------------------------------------

  article?

  Same idea, different order...

  Start button--> RUN
  OR
  'Windows key' + R

  Type:

  cmd /k net localgroup users

  It should bring up a prompt with information.  What is listed under the:

  Members
  --------------------------------------------

  article?

• XP Home Edition limited question user account windows updates.

  Is windows assume update in limited user accounts?  This is not to do it for me.   When you are logged as long as limited user, I can only run windows updates with ' run as ' administrative rights and windows updates will be download but do not settle.  I have to log on to the administrator user account to install the updates.  Therefore, it seems that for individuals (notwithstanding a technical and complicated solution) you must be connected to the computer account admin to install windows updates.  Is this correct?  Thank you.

  As for the specific error I was getting when you try to manually run windows update in LUA, where I could download but not, the error was "Windows could not install the following update with error 0x8024200e'

  It isn't the mistake that we would expect to see if the user account was not permission to install updates (for example, 0x8007F002), especially in WinXP Home Edition.

  This gives a shot:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. double-click on the file that you saved in #1 above to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. open IE (only) to http://support.microsoft.com/kb/971058 & run the difficulty mode and then AGGRESSIVE and DEFAULT. [1]

  5. restart & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  [1] you must be aware that the difficulty operating in AGGRESSIVE mode will remove your history of update (to the Windows Update Web site), but will not affect the updates listed in Add/Remove programs.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• HP applications in the windows store limited to users of HP computers only

  The following response to my question on the microsoft 8.1 forum is provided below:

  "HP provide some Apps through the store, which, in itself, is accessible to all users of Windows 8. However they are limited to only those that run a computer HP so must by definition cross some authentication process to confirm that the attached computer has eligibility.

  "Never this process what once you have applied the Pack Pro, the operating system is no longer identified as being provided by HP so can not install HP specific applications.

  My question is this:

  "Once I applied the Pro Pack to my laptop HP Envy Touchsmart 15 quad, what applications/upgrades I no longer able to download because the operating system will be is no longer recognized as being supplied by HP?

  What is the workaround for this.

  Hello THERE-5707

  HP Pro Pack is a business software and to get your question more than exhibition, I would post in the trade forums since it is a commercial product. You can do so at http://h30499.www3.hp.com/hpeb/ .

  I hope this helps. Thanks for posting on the HP Forums. Have a great day!

• OBIEE reporting to users not OBIEE that are external to the SMTP server

  Hi all
  
  Nazza salvation,
  
  Would you please help me how send you ISID signals to users not OBIEE (external mails)?
  I configured the mail server and able to send reports for internal mail.
  
  I followed the following steps as mensioned in all blogs:
  1. I created a table with default column d called SA_SYSTEM_USER mensioned.
  2. any in the physical layer
  3 creates a view for model (Dual) table with column "DUMMY".
  4 joined these tables of towing made MODEL and SA_SYSTEM_USER as a Dimension about join a MODEL Email.
  5 renamed columnsfor as mensioned in Bolgs presentation table.
  6 restart the servers.
  7. I noticed the mail of the system and the system delivery profile created with a single email id (where are the other my table SA_SYSTEM_USER email ID?)
  8. but as written in Articles he never sends emails to external e-mails for example [email protected] (this is the email from existng in SA_SYSTEM_USER)
  
  I need an urgent solution please help me...
  
  Thank you very much...

  No, no, nothing is more required SMTP side if his performance of the iBots for IDS in-house.

  If you set up SA_SYSTEM correctly, you can send reports to users non-obiee as account gmail etc.

  Try steps below...

  1. create and save a report using your logon fields and the SA_SYSTEM EMAIL that contains the people you want to send the report. Or by email or logon information must be an OBIEE user that exists in the RPD.
  2. create an iBot and under the general tab, the visibility of the non custom data value and run as an administrator account.
  3. set the conditional query on the report you made in step 1.
  4. for recipients, check the box, "to determine the recipients of conditional query. The "column that contains recipients' must be set to 'connection '.
  5. If you want to save the ibot to a shared folder, and then check the box 'Release for subscription' no otherwise.
  6. choose your content delivery and all other options and ensure that planning is set on immediately if you want to get out immediately.
  7. Save and send to any email address that was on the parole request.

  ======================

• Essbase, shared services, projects, users

  I installed the shared services and cnfigured it
  now installed essbase
  EAS
  The provider services
  and configured in the manner described above
  (Not started essbase and EAS so far)
  When I log in SSP... I see that bussines rules under projects
  no analytical service under unassigned applications...
  How can I see essbase server in the console for users of shared services management...
  It could be a basic funda... I don't get
  Help me to solve this...
  Thanks in advance

  Hello

  Have you converted essbase in native security mode for the security of the shared services.
  In environmental assessment, right-click Security and select "Externalize users.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Limits the user submitted Web Apps

  Is there a way to limit the number of times a user can send a piece of webapp? For example, a user can send an item of webapp once a week.

  I wondered if I can check the date of last users submitted web app then hide/show the form create web app in office how long the person has presented a web application.

  Has anyone tried this before? Thought I would ask before spending the time to try.

  
  Tips are welcome.

  Not quite what she asked Karim.

  Lynda - you can not return the form if you use module_webappcustomer to retrieve the elements, if it were a collection, you can use the features last Board just get the last, get the last date. You have the date server and you can perform a calculation on it in a liquid. If the date is less then 7 days - does not show the form but a message.

• URGENT! limiting apx user frm applicatn change a field data (allow to create)

  Hello
  
  I have a table with 3 columns say
  
  col1 primary key
  col2
  COL3
  
  I fill my col1 with a trigger to insert berfore
  
  I built an application apex with a page of report and form table above.
  
  my end user can create new records through the page of application form (form page shows and allows only col2, col3 to be filled)
  
  Once the folder is created by the user, if you change the same record (by clicking on the Edit ICON present before that particular record) only col3 must appear as editable in the form page to be updated by the user.
  
  Please help me its urgent.
  
  Thank you and best regards,
  Ajay
  
  Published by: Aj on August 4, 2011 03:55

  Hi Ajay,

  When navigate from a link pass (change ICON) tell application "UPDATE" and:
  (1) make col1 and col2 as disabled / ReadOnly at the request of UPDATE. (using the Action dynamics or other means)
  (If you disable and operation of update in which you use disabled items that you must re-enable submit it)
  (2) conditionally display items that are not displayed col1 and col2 on request UPDATE.

  I hope that helps!
  Kind regards
  Kiran

• Scoring system that limits each user to one vote per article

  I am creating a site based on PHP Web where people can download of content and other users can categorize content. How to create a rating system that accepts only one vote per user registered for each submission?

  April 4, 2007 in macromedia.dreamweaver, AngryCloud wrote:

  > When a user will decide on a certain picture, where is the information
  > stored that says that this specific user voted on this particular
  > image?

  In the table, you create joining the two:

  USERTABLE
  UserID > key field
  Username
  ...

  PICTURETABLE
  PictureID > key field
  Nom_image
  ...

  USERPICTURE
  UserID > foreign key
  PictureID > foreign key
  PictureRating

  --
  Joe Makowiec
  http://Makowiec.NET/
  E-mail: http://makowiec.net/contact.php

• M70: Permissions, wallpaper and limited user

  Hello

  I spent some time setting (i.e. a few days of mucking around) upwards a new portable computer M70 (PSM70A-T00E), which has WinXPSP2 preinstalled (on a recovery DVDs of all-but-useless without the 'expert' option alleged, but that is another story).

  When Windows was first installed, I configured the administrator (by default) and the account of a user (called "aburdeni"). By default, both accounts have administrator permissions.

  After setting things upwards from the way I like them, I am now trying to convert the user of an account account limited.

  The usual method of "-> Control Panel-> user accounts-> change account type" does not work as it claims that there is only one account on the system (even if there is one with the username "Administrator", which he ignores reason any).

  To replace it, I logged as an administrator and run lusrmgr.msc. I then added the "aburdeni" user to the user group and them deleted in the administrator group.

  Things broke.

  What I noticed now is that:
  * The default theme of Toshiba's not (no wallpaper, just a light gray background)
  * Panel back to the default line style, and clicking on the give-it-to-me-the-way-I-like-it text on the left side has done nothing.
  * Other (taskbar, start menu style) settings back to the default value.

  There are probably countless other things that broke, but I have yet to find them.

  Affecting the power user account instead of the user made no difference. Things only started working again when I added the account in the administrator group.

  Is it possible to have things to work while connected as an unprivileged user?

  Thank you
  Adam

  BTW: I'm from Australia, if that makes a difference (different settings for installation by dΘfaut?)

  Hello Adam

  As far as I know that there is no difference in what country you live because the operating systems are the same for all countries and some different settings according to the country are not known to me.

  Please remove all created accounts. Connect as long as administrator, and then create a new account. First step is to give the name for this new account and click Next. Second step is to define this user (Administrator rights or limited same user). Choose limited option and complete the wizard.

  Use Windows + L key combination and try to log on as a limited user. To avoid any problems. The background image and everything will be set as if for the first time.

  You can do a little test and try to start the public electricity service Toshiba. You will see that there is no chance to start and change anything. It can be used only by the administrator.

  Please try again. It must works.

  Good luck!!!

• How can I change account limited user account for the administrative account information

  Can you please help me find answer how to change account limited administrative user account information? I'm locked and I can not change any info because by mistake I select limited in my user account account.

  Hi sbhailal,

  See the Microsoft article below and try the steps mentioned, check if it helps you log in windows.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305

• Run an application in a user limited administrative access

  I need to run wampserver.exe in user limited without user interaction, I mean I don't want to enter password again and again.
  In any case to create a service execution wampserver.exe or in any other way?

  No, who does not work.

  You must apply to the application providers.

• How to prevent a user to access one particular project

  Hello
  We have two business units in our society. Under each operating unit, there are few projects.
  We have created two forms - one for each OU the access project responsibilities and assigned respective profile of operating unit to each of them.
  Now, if a user is assigned the profile option - 'PA cross project user - updated' = Yes, so he can see all projects using the above responsibilities.
  But we want to restrict him to see a particular project using the responsibility above.
  Can someone let me know which profile option should I use to do.
  Concerning
  Hawker Hunter

  Hello

  You must set the options of profile - following
  PA: Cross project user - setting a day = No,
  PA: Cross project user - view = no.

  So the user only will be able to view the project, he is assigned to as a key member.

  Dina

• Limitations of the user on v11g XE?

  Y at - it no limitaion in the number of users that can access the database at the same time?
  Or is the 11g XE a standalone version?
  
  Kind regards.
  -Wilfried

  The main limitation with XE is the maximum amount of user data, several optional Oracle components available in other editions are not included with XE, see the documentation for license for more details.

  The instance can manage as many simultaneous sessions that the host can take in charge the OS (and the design of the scheme). Physical memory and processes or other limits of resources on the host will usually come into play, first of all, and the memory total XE for instance 1GiB limit can also be a factor limiting total user sessions.

• Send an OBIEE report to the user no OBIEE Mail (customer) in OBIEE11g

  Hi Patricia,
  
  I'm fresher to OBIEE, I need step to 'send an OBIEE report the user no OBIEE Mail (customer) in OBIEE11g. searched on-line got only OBIEE 10 g Documents that one also followed but no results. Please help me... step to config a courier for external users.
  
  Thnaks,

  That the SMTP server configured by your admin and create a privilege given to your role agent. Then schedule an Agents to yourself / Testuser with the report to be sent to external users as its content. Configure the profile of delivery to the recipient. In the implementation for electronic device - profile of delivery specify the external e-mail address. This might be useful

  http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/FMW/bi/bi11115/delivers/alerts.htm

  Thank you.