Essbase, shared services, projects, users

Similar Questions

• Shared Services project

  When we create a classic Planning Application, one of the first things he asks us to do is to select a Shared Services project. I don't know what is shared Services, can someone explain to me what exactly a SS project here? And what difference does make to the user or developer? What is the consequence of the choice of one SS project rather than another? I can't find anything in the SER60, BUT in the case where I missed it, please direct me.
  Thanks in advance...

  Basically, there is nothing more than a grouping, or say something, he lets you just put say planning applications against a project called planning to say, there is nothing to say about it, really.

  Either way, you forgot to mark this message :) - install Version 11.1.1.3 Plan & sequence: Questions

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Creating Application planning – Shared Services project edition

  Hello

  I use the Hyperion 11.1.2.3 version and try to create the new application from planning through the workspace.  I am not able to see the 'Planning' group in the shared services project.

  Please could you help me to create planning applications.

  

  Thank you

  Michel K

  You will need to create a new application group in Shared Services, it is simple to do - Create Application groups

  Once you have created the group, you should see it in the list of projects of Shared Services when you create a planning application.

  See you soon

  John

• Portage to Essbase/Shared Services other landscapes.

  Hello
  
  I need port/refresh the Essbase/Shared Services (11.1.1.1 on Windows) of the development environment for Test environments. These two environments are different matters and I don't think I can usre LCM. I have Foudataion/Shared Services and Essbase configuration on the Destination host. Can someone guide me how I can move the Essbase/Shared Services in these environment manually. Document refrence or instructions step by step will be very useful.
  
  
  Thanks in advance.
  -Samar-

  The utility is located in:-Hyperion\common\utilities\CSSImportExportUtility
  He will need decompression there is also a doc pdf in there with details on how to run the utility, this utility is only for delivery.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Migration of LCM - Instance name?  Shared services project name? Data source?

  --------------------------------------------------------------------------------
  Situation
  --------------------------------------------------------------------------------
  * We have hyperion 11.1.1.3.24
  * Objective - trying to migrate files LCM of our DEV to UAT environment
  * DEV LDCS alone has enabled planning application ("budget"), little EN reports & other related artifacts.
  
  
  --------------------------------------------------------------------------------
  Up to now
  --------------------------------------------------------------------------------
  * Successfully exported these 4 (EPMA, shared services, planning & EN) of our DEV
  * When you try to import EPMA in our UAT, noticed that the State indicates failure. (Notice how claims have been reported in other posts as well.)
  
  Another dilemma that I have what should I write on the name of the Instance, the name of the Shared services project & the data source.
  
  * Instance name = >? I'm not sure. How to find it?
  * Shared services project = > have not created one at all. Thus, those who do I use OR how do I know this?
  * Data Source = > I guess, it would be the name of EPMA repository database?
  
  
  Although I can migrate all the artifacts in our (the same as our DEV) UAT, Migration status showed as "failed". Is this due to the fact that I jumped Destination options with empty values (for example, shared services and data source). Has anyone ever had success on this stage of the Migration.
  
  OR should I simply ignore this state of migration, because we can see all of the identical artifacts in our UAT.
  
  
  Any help would be greatly appreciated.

  If you connect EPMA and choose an application and select deploy (don't worry, you don't have to deploy, you can cancel it until you do).
  It displays a popup that will be the
  Name of the instance (usually the default), Shared Services project (drop-down menu displays the groups of different applications available), the Data Source (this is the name you gave when you created the source of application data)

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• What is "Shared Services Project"?

  Hello world.
  
  What does "Shared Services Project" which is when the Hyperion Planning application is created mean?
  
  Is this right need be selected?
  
  Please notify.

  Shared services is the place where all the stuff of unique signature take place between different applications, Hyperion. It also includes the management module Life Cycle that is used for the migration of applications. You can think of such as shared services shared services projects where you put your apps into folders. You must associate not only planning, but all possible applications of Hyperion with her. You can create a project yourself and match your applications with it, or simply use one of the existing ones such as 'Group of applications by default'.

  See you soon,.
  Alp

• Export the list of Shared Services Hyperion users [EPM11.1.2.2]

  Hi all

  I used to get the list of users of native directories by using the query:

  Select * from CSS_USERS;

  I watched the rest of the tables of Shared Services and could not find the 'username' of the accounts stored in the external directory. Everything I could find are users AD matching GUID. eg. msad://OBJECTGUID= \f7\70\aa\c1\fb\0f\61\4e\95\b9\e5\f8\1e\8b\23\43? USER

  Is there an easier way to get a list of users provisioned within the Hyperion?

  As a solution, I have manually draw the details of users using LCM. is there a way I could automate this?

  UPDATE *.

  -Version EPM: 11.1.2.2

  Thank you

  Kent

  Finally, I used Utility.sh to export the groups to a file called Groups.csv - it made me the list of AD users added to an indigenous group Directory.

  ---

  Reference for people EPM11.1.2.2 - utility using life cycle management

  For example.

  $ sh Utility.sh /path/Oracle/Middleware/user_projects/epmsystem1/import_export/2013-10-30__NativeDirectory_Users_Groups/Export.xml
  > Enter username - admin
  > Enter the password.

  Migration of artifacts of Foundation/Shared Services/path/Oracle/Middleware/user_projects/epmsystem1/what/2013-10-30__NativeDirectory_Users_Groups/HSS-Shared Services

  Artifact exported - users.

  Artifact exported - groups.

  Migration status - success
  $

• Import of security through caused shared services admin user password chang

  Hello
  
  I exported the SSP url for shared environment and any services in another environment. This changed the admin password which I imported.
  
  
  Details:-
  
  I went to share the services of an environment say dev and to-> application-> Foundation-> shared and exported services groups. Has taken its export and imported into the test environment.
  
  Now that he has changed the user password of the target with the source one. However, I remove the internal ID of all the files inside.
  
  Can someone please help? How to recover the password of it? I have no back up of the test environment shared services.
  
  Version 11.1.2.1
  
  Thank you very much in advance!

  I was hoping you had a strategy in place, it's basically restore the relational database of shared services from a backup, stop the epm services first.
  It is even possible to fix your LCM file and set the admin to the way it should be, but I do not know what state the commissioning is to thus could not guarantee it would work.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to connect Essbase/Shared Services 11.1.1.1.3 to LDAP

  Hello
  
  I just installed Essbase 11.1.1.1.3 with Shared Services. I never have it connected to a corporate LDAP environment before. I remember the last version 6/7 etc... There was a CSS file that need edited. Is that still the case or do I have to go in Shared Services and configure etc...
  
  
  Thank you

  Hello

  Configure you everything through shared services, have a read of:-http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_security/ch05s05.html

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Regarding shared Services

  Hi friends,
  
  Here is a general question about shared services. I outsourced an essbase server. I created a user of shared services, and when I created a user iam looking for option where the user can change the password for their first login. IAM unable to find this option in shared services. Please let me know if you have an idea.
  
  Thank you
  RAM.

  Hello

  If you want to return to native mode essbase can later convert mode shared services?
  Not something I would recommend to do, but maybe possible, you will need to remove the essbase Shared services project, stop essbase, rename or delete essbase.sec and rename ESSBASE. BAK_preUPM to essbase.sec, startup essbase.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Essbase server showing in Shared Services, but displays do not when you try to assign roles to groups.

  Hello

  11.1.1.3 version

  SSP Essbase server shows but for all groups roles has beed deleted.

  When I try to re - assign particular group roles, I realized that Essbase server does not show in the left pane.

  This means essbase struck with Shared Services? If so can you please let me know the steps to register again?

  I know to remove the instance Essbase Shared Services and new Externalize user will do, BUT can you please let me know y at - it problems doing?

  In the morning today only we are facing this problem.

  Thank you

  Alain

  Hello

  Problem has been resolved. Worked with Oracle and review Essbase.

  It is corrupt and possibly RDBMS openldap.

  Solution: Manually (via MaxL) has deleted all requests for services shared and deleted essbase server then outsourced to the users to register with Shared Services.

  Thank you

  Alain

• Backup shared services

  Hello
  
  I need to take backup of the shared services; my users are outsourced (MSAD, native)
  
  (1) should I use backup.bat (located in hyperion\SharedServices\9.3.1\server\scripts)
  (2) and the pattern of shared services (export).
  (3) will it be enough or I need to use cssexport.bat (although this backup for server similar to restore if needed)
  
  Version 9.3.1
  Oracle db
  modules, shared services, planning, essbase, EN
  
  I think that the step 1 and 2.
  should I skip step 3 or desirable.

  No, you should be fine if it's just shared services.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Type of user to the Shared Services

  All,
  I'm on 9.3.1
  So far I have users only to the planning application.
  Now, most of the users above have need to access an application native essbase (with planning).
  In shared services, under project-> AnalyticServer-> AnalytciServer, only users are listed (no groups) and their Type 'user' is planning.
  Now I have to change them to "Planning, Essbase" for each user.
  I found no "user Type" in the corresponding section in the export of the CSSImportExport utility.
  have many users, is it possible to automate?
  
  Thank you
  Krishna

  You could look at using maxl

  For example

  ALTER user user_name add application_access_type Essbase;

  or

  ALTER user user_name add application_access_type planning;

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Planning application no no projection in Shared Services 11

  11.1.2.3 version

  Last week our planning database got corrupted, do not know how, but it happened.  I went through the steps to recreate and restore the data, however, there is a small problem.  The application is now not showing in Shared Services, therefore, that I can't access SmartView.  Here is what happened.

  1. because I'm a nervous nelly, I first renamed 'PLAN' "PLAN1" via EAS

  2. I then selected "Create Database" planning and had no problems, a new Essbase application and databases have been created.  The new application called 'PLAN' as expected

  3 al ' Shared services, now, what emerges are two applications "PLAN1" which is clearly a single essbase application and "PLAN1" which is a planning application.

  I can select plane1 as the planning application and can get security charge very well, however, in SmartView, users cannot connect.

  How the world make it only show 'PLAN' and get rid of the old "PLAN1" applications.

  Thank you!

  Finally, I felt comfortable enough to register the application with Shared Services.  A few seconds, the problem was solved!

• "Assign access control" on essbase applications through shared services

  Hi Experts,

  I just install an Essbase 11.1.2.4 environment, where I could see that the ability to assign filters to users in environmental assessments is disabled (I guess maybe it's that this version does not support the autonomous concept).

  So I thought of attribution of the filters to users through shared services groups\Essbaseinstance1\sampleapp Application - access entitlement control, but when I click on "Assign access control", it says in the right pane that the page cannot be displayed.

  Any tips?  for your information, I use IE 11.

  Thank you

  Siva

  I gather from your question that EAS runs like it enough to be upward, as you did that you have configured the web server again after that the configuration of the Regional service otherwise it will be a communication error.

  See you soon

  John