IdeaPad u310 turns off during sleep

Similar Questions

• Y580 with Win 8 Wireless keeps itself turning off during sleep - new edition.

  I have a newer Y580 with Windows 8.

  I've had this computer for months and the wireless worked perfectly well. I did no new changes and updates that I can remember recently have run.

  Whenever I close the lid on my laptop, the wireless connection will turn off. Windows displays the airplane mode is DISABLED and it shows no networks available in the section 'Wi - Fi '.

  Wifi works only after disablng of the wireless device, the reactivation of the device and then clicking on "Diagnose" from the popup menu of the device.

  Any advice would be appreciated.

  Thank you!

  Hi jaharris,

  Thanks for posting. Please try the suggestions below.

  > Go to control panel
  > Open center network and sharing Center
  > Click on "Change adapter settings" (located on the left panel)
  > Right click on the "WiFi" icon and select "Properties".
  > Click on the button "configure."
  > Select the tab "power management."
  > Uncheck "allow the computer to turn off this device to save power".
  > Click OK

  Hope this helps and do post back with your results.

  Concerning

• Satellite L350 - display turns off during startup

  My screen laptop L350 itself turns off during startup after posting normally for about 2 seconds. It is possible to get the display back to normal if you go to sleep and then wake, but the new screen only stays on for about 2 seconds. This makes it almost impossible running the diagnostics.

  Does anyone have an idea what might happen?

  Hello

  Have you tried an external monitor?

  Perhaps the internal display is affected and needs to be replaced

• Computer is turned off during the update of game time.

  Windows Update (set to auto) works if your computer is turned off during the update set time?

  I ask this for XP and Win 7.

  Thank you

  N °

  Assuming you want to say in fact 'off' and not 'sleep,""standby","hibernate"by 'off', or another version of not-really-off.

• the phone screen turns off during a call... No control over the phone

  My Defy screen turns off during the reception or to make a call... Impossible to control the phone... need to take out the battery to turn off the call... Help! PS this could be a software issue or user?

  Do you have a case on your phone? It seems that the proximity sensor is processing the phone as if it were close to your face. A case or a screen protector can cause problems if it includes the proximity sensor - near the earpiece.

• My computer turns off during an update to windows xp and now windows xp will not load.

  My computer turns off during an update to windows xp and now windows xp will not load.  It gives me the option of last known good configuration and safe mode startup and normal startup, but it just goes back to the loading screen then flashes a blue error screen then back to display boot options.  I don't have a recovery disc as the laptop does not have a CD-ROM drive or a floppy drive.  I have the product key, but I don't know where or how repair the operating system.

  Contact the manufacturer of your laptop as there must be a way to restore the computer. There may be a hidden restore partition.

• Unable to change screen turn off or sleep modes, it gives you the choice, but does not take account of their

  Why windows 7 with service pack 1 does not change screen turn off or sleep modes, it gives you the choice but he ignores them

  Hi William,.

  1 did you changes to the computer before the show?

  2. What is the brand and model of the computer?

  Please follow the instructions to troubleshoot the computer's power:

  Method 1: Run the troubleshooters mentioned:

  Open the troubleshooter of power
  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  Method 2: Update the latest display drivers

  1. Click the Start button
  2. Select Control panel
  3. Open Device Manager
  4. Expand the graphics card
  5. Right-click on the drivers, and then select update
  6. Restart the computer

  Method 3: Scan SFC Run in the computer

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows system files
  http://support.Microsoft.com/kb/929833

  Method 4: Check the link to solve power problems in Windows 7:

  On troubleshooting in Windows 7 power management
  http://support.Microsoft.com/kb/980869

  Let us know if you have other questions about Windows in the future. We will be happy to help you.

• Cannot turn off option "sleep and fresh."

  I can't turn off the option "sleep" and fresh. I did not need, and it disrupts the functioning of my scanner. Apparently, we should have two types of USB ports: with the sign 'Flash' (used for the options 'sleep... ") and normal. I have on the left side of my black ports two laptops and Satellite on the right two blue ports.

  I can't find the sign "lightning" anywhere and sleep... ' icon appears whenever I plug the scanner; This happens for all 4 ports. I entered the "sleep...". ' Set up the menu and try to disable this option, but it does not work. I tried to uninstall the option "sleep...". ', but it does not appear on the list of programs, you can uninstall.

  We should be able to completely eliminate the options that it is not necessary, but I can't manage it.
  Dan

  Hi Dan

  Sleep and charge option can be disabled in the BIOS settings. Have you tried to do already?

• Satellite P770 system turns off during recovery

  I am the owner of a Satellite P770 and during the recovery, the device turns off to 'Performance testing' stage. It has everything installed and I managed to stop the recovery process.

  It looks like there some cosmetic minor things, that he has not completed, but I always get the opening screen saying its completion with the first start of time.

  I went into the performance tests of Win7 and it does the same thing, instantly turns the machine.

  I really need help!

  Brad.

  Hello

  Is the Satellite P770 disables automatically running other applications like MS Office, Web browser or even some games?

  Usually the laptop would be closed automatically due to high temperatures but I don't very well if this is the reason in your case m

• 860 - 009na: the monitor turns off during access to / applications change full screen

  Hello

  I got a new computer packed with the HP Envy 32 inch monitor. I am running on an issue that is simply irrating and I don't know how to solve it.

  Basically, the screen is empty. It is not a hard lock or whatever it is, he decides just during initialization more applications full screen (IE, a game) or even post Win10, connect, when computers are like "flickering" during the swap, the screen just turned off. This can be resolved by switching on the monitor input channel, or put the monitor in standby and distributed. On these occasions, I get sound through the screen.

  So appearances, the screen continues to receive entries from the computer and because of switching the monitor off and on again, it display image as expected. This is a case where the monitor is simply decide that it does not want to display the image for reasons unknown. Such as energy conservation.

  I updated the graphics card, provided I got most up to date display driver, double checked the connection... it just happens.

  It feels like it some really boring affecting somewhere that makes the screen, and I really want to change it. For the moment, it is a rate have to turn on the screen and two times just to get the start menu, then if I insert a game, he does even once, when I leave the game, does it again. It does not occur when a game that supports the windowed mode - without borders is loaded (I guess because it is not 'true full screen').

  Thus, it seems to happen during this process to set full screen.

  Well, there is another cable that I was not in the box titled "DisplayPort".

  So I changed my HDMI cable to use this one. The monitor works perfectly now... so as a workaround, this solved.

  But the question remains, why the monitor was so weird when using HDMI? It might be marked up as a potential problem.

• Slate 8 Pro guard blocking turned off during playback

  My HP (slate 8 - Pro) table that keeps blocking off after a few minutes even if sleep is set to 30 minutes. After a few minutes it just close the page and goes back to the home screen.  Received from the centre of Service of Calexico in lieu of my original Tablet.  I get no error message before he stops and outside apps have not made any changes. Any ideas what the problem might be?

  Hey @gsparky ,

  Welcome to the HP Forums!

  I understand that your Tablet HP Slate Pro 8 is automatically shut down.

  Can you please clarify if the slate is to be completely turned off (to hold the power button to wake it up) or if the application closes (taking you to the home screen)?

  That you happens to all applications or is it only in a particular application?

  Try to clear the cache on the Tablet, there may be damage to the data stored in one of the applications or OS causing accidents. To do this, go to settings > storage > cached data. Touch it should give you the option to clear all the cache.

  Please clarify the question or let me know if that helps.

• accidentally turned off during the update of windows

  Guys, im using sony vaio with vista premium OS and it is automatically updated, I had used to remove my battery for use at home, during the update of windows, I accidentally kick off the power cord and it disconnected from the main power switch and turned off, when I open it I saw a note on the bottom right 'tm this copy of windows vista is not authentic.

  someone could help me on this guys, how can I do recover without reformatting my laptop.

  Please help me guys...

  Thanks in advance...

  Needless to say, cutting the current during the update process can cause all sorts of problems - many not even related to the update itself.  It is a common branching.

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.  I don't know if this will solve the problem, but it might.  It's worth a try (and it can be useful if there are other problems that you have not yet detected).  Whether or not it works, you will need to re - install the update (and this time won't turn off - LOL).

  If you still have the problem of validation after system restore, and then click Start / computer / system properties and check the bottom of the Activation section.  Your system always shows that it is enabled?  If this isn't the case, then reactivate.  To activate manually, go to start, search, and type in slui 4 enter.  Enter your country and press Next.  You will be on a screen with a phone number and a bunch of codes below.  Dial the number and browse automatic guests until you get to a human being.  Have your handy product code because it will be asked.  Explain the situation, but it's the same PC.  They should give you a code to enter on this screen to activate Vista.

  If this does not resolve the "not genuine" message, please post your problem in the Windows Genuine Advantage Forum: http://social.microsoft.com/Forums/en-US/genuinevista/threads , where the experts on this kind of problem will be more than happy to help you with your problem.  They will probably ask you to run a program and download the results so they can examine in order to find the problem - just follow their instructions.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Printer e-all-in-one printer 7520 printer turns off during the night

  My printer was initially set up to automatically print multiple daily crossword.  It has worked well for more than a month.  Now the printer stops during the night, and I have to unplug the device and plug it in again so he can print the puzzles.

  Hello DonIriving,

  Welcome to the HP Support forums.  I understand that your Photosmart 7520 stops during the night.

  I've included the document the printer turns off unexpectedly after being inactive for a period of timetroubleshooting.  It will guide you in how to correct this problem.

• How to usb power turn off mode 'sleep'? Yes were asked and no, it has not yet responded.

  until someone says "its been answered" and "look at other messages ' u try these directions and let me know if it works. cause I did, and if you're smart enough, I'm sure you can understand my result of posting me my question as well.     I had older versions of windows (xp and 98) and when the computer was put in mode 'sleep' it wouldn't keep turn on/off devices.  Now in windows 7, it's a totally different story. What ould iw as is for the usb power switch off appliances like the old way. Francis IS at ALL possible? because of everything I've seen here, it DOES not work.  No, changing the thing selective usb to allow disabling power management GOLD DOES not work. NO, by checking or unchecking the checkbox in the Device Manager, etc., for the USB ROOT HUB to "allow the device to turn off the power" or whatever it says DOES NOT work either.  All what I want to know is, is possible to do this, turn off the power for something as simple as an external fan or a hard drive will be TURNED OFF like it USE TOO. Please do not post instructions on how to do the 2 steps that I mentioned. Really annoying because it's what keeps popping up for everyone to do and then you see inside people answer "N" T WORK."   And also do without consulting me the manufacturer for support, cause this is the problem of MICROSOFT, is not a problem of the Lim.  A lot of people have this problem, microsoft turns, find something here...

  It is also for period of SLEEP mode. Yes I know he doesn't put into hibernation, and judgment, to my question here. That's the mode 'sleep'. Thanks for all who have comments/instructions USEFUL. Nice day

  See the responses on this thread

  If you want to manage the setting through the registry, you can paste the following text in Notepad and save to a .reg file and import or manually create the keys.

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\USB]
  "DisableSelectiveSuspend" = DWORD: 00000001

  -Sumesh P - MSFT.

• end 2012 iMac 27-inch randomly turns off during simple tasks

  HI I end 2012 27 inch I Mac

  while I do tasks such as there is a time when I was waiting for a word on Microsoft word 2016 document while listening to a YouTube video, my Mac goes off randomly. If I move the mouse that nothing happens, or if I click on the keyboard, even when I click on the button at the back of the mac market. To remedy this, I have to cut the plug from the socket and wait a few minutes, then switch it on again, then without me touching the power button on the back of the Mac turns. I have a usb hub that has a constantly on the Mac is on the head, and when the problem arises that the led is not on so I'm sure that the Mac is turned off completely without power. The power offs get more frequent, and at first I thought it was because it was when I was using Windows in virtual box, but I deleted the virtual machine and the problem still happens.

  I think it has something to do with the power supply becpause I have the iMac connected to an extension cord about 7 meters which is plugged into the wall outlet

  the extension has only two taken end that which I use for the Mac and one for my printer (brother j132w) but I don't think that the printer has nothing to do with it, because the problem happens even just the I Mac is connected to the extension lead.

  I live the. U.K., so I have the uk plug if it has a meaning

  Help, please

  Thank you

  If please send a report to EtreCheck of your system and post it in your reply to this message. If you want to learn what is EtreCheck, just click on the link.