Toshiba laptop keyboard not working not properly
Today my daughter was doing the work of the school on my old Toshiba laptop purchased in February 2012. It crashed at 12 Dec, Toshiba gave me the whole term on fixig so I had to have local difficulty. Even after it was fixed, it never was the same a awesome laptop turned into something of a child's play. Anyway, I gave this laptop to my daughter and bought another laptop. Once again, the Toshiba worked but was not until I had to do, was not quickly leave and the hard drive was not the same (once it has been repaired), but it was bearable for a child. Today, my daughter was of school work (or try) when she noticed problems with the keyboard. The buttons were working, but which has been pressed, wasn't showing on the screen. Example: If you press the W button, this indicates: 3/3/3/3/3 appears in the display. If you press the button, it appears:... (3) individual letters, numbers and random characters appear on the screen when you try to type. If you press BACKSPACE, it refreshes the page. I found an old office keyboard and ito the Toshiba is plugged and I am able to type without any problem, so I thought that it was a matter of device. I went to devices and printers, ran a bad shoot and got the following report:
SM Bus controller is not a driver not installed
Problems encountered:
Unknown device is not a driver... Not fixed
Apply the solution to the problem of driver... . Completed
Install a driver for this device... done
SM Bus controller doesn't have a driver... Not fixed
Apply the solution to the problem of... completed pilot
Install a driver for this device... Completed
Problem with the PnP devices... Detected
Potential problems that have been verified:
Windows Update is configured to never install drivers... There is no question
I tried to install a driver using Windows Update, but it was uncessful / could not detect a driver installed. Windows has suggested I go the manufacturer of my laptop to download a driver from this site. I'm on the Toshiba site now and after entering my serial number on this subject, they gave me a list of updates. I do not know which install beause they have two updates listed under keyboard, 10 listed under devices. I don't know which one I need to choose.
When I first bouht the Toshiba it was Windows 7 (which came standard with all computers). The person who fixed installed Windows 7 Ultimate, if it helps. Can someone please advise on what is wrong with the laptop keyboard. The laptop was not great after it crashed / 'repaired', but he was able to do the basic functions
Hello
Sorry, but I don't see it as a software problem, despite the report of devices and printers. I would say that time has caught up with your computer "crashed" (where the report of devices and printers).
Are you able to type normally with an external keyboard, the "computer" went very well. The problem is with the keyboard and/or the original "repair" (which does not look like it completely solved the original problem).
My suggestion would be to take it to a repair shop trust you, or your daughter use the external keyboard, or possibly to invest a few hundred dollars in a used cell phone, or...
Keep me posted and let me know how you fare.
Kind regards
BearPup
Tags: Windows
Similar Questions
-
Laptop keyboard not working not
My laptop keyboard finally quit, and I can not connect after that it resets the last time. The vowels are not working so I can't sign into Windows to my docs or anything like that! What I have to reinstall Windows, and if so, will I lose all of my docs, photos, etc.? My last backup was some time ago and I know that it doesn't have some of the things that I need. For some reason any just vowels do not work, and I have vowels in my password. Unfortunately, I just had the Mac and did not transfer all I need my laptop again.
Hello
1. What is the brand and model of the laptop?
2. don't you make changes to the computer before the show?Method 1
I suggest to connect the external keyboard and try to connect.
Method 2
Once you log in, then I suggest you try the steps from the following link:Mouse, touchpad and keyboard with Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows?T1=Tab03If the problem persists, then I suggest you to contact computers manufacturer.
-
HP Pavilion 17 Laptop: Pavilion 17 laptop keyboard not working
The keyboard has stopped working, can type password to enter the system. But once in Windows 8, the keyboard does not work.
a. refreshed the laptop
b. uninstalled information from keyboard in the Device Manager
c. rebooted the laptop
d. BIOS update
e. reset the software in the laptop.
Works in the Test System, there is no problem with the keyboard works in the test system.
The laptop reported that the keyboard works fine when I go into Device Manager.
What now?
Hello
As the keyboard works until you connect, check the following.
Open windows control panel and on the top right, next to the display by: select "large icons". In the new page layout, select the "ease of access Center.
Select the option "make the keyboard easier to use".
If there is a check mark next to "Turn on keys filters", click on the box to remove, and then click apply and then click Ok to save this change.
Kind regards
DP - K
-
My toshiba laptop will not connect to my HP Envy 4500 printer
Recently, I tried to connect my Toshiba laptop running Windows 8, wireless on my HP Envy 4500 printer. I am trying to scan something on my laptop, I did with the printer before. I have the remote app, and I have connected to the network the printer wireless displays in the wifi of my computer. However, when you try to get the printer to scan, using the option on the printer screen, it says that no device is connected, and to ensure that the software has been installed and this scan to pc has been activated. I opened the application on my laptop, in hopes of getting better results using what it was, but he told me that the printer is offline, if it was obviously on. I'm not entirely sure why the printer doesn't recognize my laptop, even if my laptop recognizes. I spent nearly two hours, disconnection and reconnection, as well as the printer off about three times. I'm about to uninstall the application and try to reinstall, but I'm questioning that results will be better.
I don't see any other way to solve this problem, because there is no USB port to connect a USB cable don't, like myprevious printer and wonder if it is my laptop, not the printer, which is faulty. It works for printing, when it comes to other devices in my house, but I had problems same impression with my Toshiba before. I tried only with another scanning device: a desktop HP Pavilion Media Center TV PC computer. I'm starting to think that the scanner is broken to only other reognizing products HP and ask any advice to fix this problem.
Hi AMakkei,
Welcome to the HP Forums!
I understand that you can't scan with your Envy HP 4500 to your laptop Windows 8, and I'm happy to help you with this problem of connection!
To get help, I'll need to know the following information:
- If the printer is capable of making copies of itself.
- If the power cable plugged into a surge protector, or directly on a wall plug. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.
In the meantime, please try go through this guide. A computer"not found" or a Message appears "connection error" during the scanningand let me know what happens!
I hope to hear from you and have a nice day!
-
Why Toshiba laptops are not supplied with the common Vista installation CD
Our House now has two laptops from Toshiba x, which were provided with MS Vista Home Premium pre-installed.
The nature of the medium of recovery provided with these machines is such that (a), we do not have enough flexibility to the volume/partition sizes, locations of program etc. and more specifically.
It makes it necessary for the majority of the supplied software (Norton Security etc.) should be installed by default in the case of a system failure. (And immediately uninstalled after recovery! A useless waste of time).
In view of the fact that a proportion of the price paid for each laptop must have included a cost for the Vista operating system, do anyone know if it is possible to get a recovery disk of master which consists ONLY of the operating system, and allows us the flexibility of configuration that was available when the OS was purchased as a separate product.
In addition, please let me know if it is possible to buy Toshiba laptops as a machine to RAW, IE no BONES no provided, and I'll then buy my own and cut out the garbage that are provided on the pre-installed medium.
Hello
If you need a DVD of Vista as the original DVD of Microsoft Vista you will need to buy!
Toshiba and other computer manufacturers create a clean recovery disk which includes the Windows operating system, the drivers, tools and utilities to simplify the laptop restore.
Using the recovery disk, you can restore the laptop to the factory setting within 10 minutes.
In addition, this Vista OS is supplied under OEM license and can be used with this laptop
Concerning
-
My toshiba laptop is not getting connected wireless if I have SID and key no.
I have the model Toshiba Satellite laptop and I am not able to connect to a wireless home line. If I have SID and no. Key, my laptop is not be connected. I used it earlier.
You will be please to restore the settings the parameter as he cites the 87122 defect.Thanking you,Manguin/ * original title: my computer is toshiba laptop connect wireless if I have SID and key no. I * /.Have you applied the hotfix in this article?
-
HP Pavilion 15 laptop does not properly turned off
Hi everyone, I am faced with a wireframe, annoying problem with my less than a month old HP Pavilion Notebook 15-p029tx.
Sometimes, after pressing 'Shut Down', within the screen 2 seconds turns black, but the laptop would not extinguish itself, i.e. fan and power lights stays on always (once, I waited for 1 hour, like only the screen off & pc does not respond, occurs at the same time plugged / battery power). So, I press the power button for 5 seconds to turn it off. The next time he acts as restart, i.e. takes longer to boot and windows plays the startup sound.
This kind of wired issue does not occur on every stop down. It happens probably once in two days of use. Standby, hibernation works very well.
Configuration of the laptop: Pavilion 15-p029tx; 4 GB; Intel I3; 2GB NVIDIA; 8.1 Windows x 64 only language; 1 TB HARD DRIVE. Latest version of Windows, HP drivers, Antivirus updates are installed. PC is in good condition (defragmented HDD, registry, Ccleaner cleaning). Does not overheat is not possible: I have cooling pad and the weather is cold here.
Steps I performed to fix the problem: Updated to latest Bios F.12; Reset bios default setting; made all the system from the bios, no found error diagnostics. Today, I run 10 stop test with different conditions, but it has never happened during the tests! Also all the usb ports give power during this gel.
But I don't know, I would have to hold down the power button / stop again in the next two days.
Experts please help me to resolve the issue, its very annoying when I'm in hurry, hurry to stop, lid closed, and next time, when I leave the laptop in the bag, it would always be running / power!
Sorry for my bad English.
I found the root of the problem. The culprit was Mcafee. After you remove Mcafee, it works well!
-
REGISTRATION FOR TOSHIBA LAPTOP DOES NOT OPEN
EVERYTIME I LOG IN I GET A MESSAGE THAT SAYS TOSHIBA LAPTOP RECORDING CANNOT OPEN.
ANYONE KNOW WHY THIS IS PAST?Hello Megan
Already registered your laptop?
Recovery image Toshiba contains several tools that run in the background and probably one of them cannot start properly.
In General, you don't need and you can remove it from the system.Go to start > Control Panel > programs and features. See the list and it must be listed Toshiba product registration or something like that. Uninstall and restart your laptop. I hope this will solve your problem.
-
Two years trying to get Toshiba laptop wireless connection works
I tried for two years to try and get the connection Wireless on my Toshiba laptop to work without much success. For a short period I managed to connect the laptop to a desktop computer's ad-hoc wireless and share the internet connection in this way but then it stopped working.
I have a Toshiba Satellite Pro U400 - 15L model no PSU45E-00J005EN. It is with the 12.1 "screen and running Windows XP Pro sp3.
My wireless switch on the front of the laptop is turned on. It is also activated in the software Fn F5 wireless enabled, disabled bluetooth. I don't have Intel ProSet.
Already when I was able to establish an ad hoc connection using microsofts software. I had to manually activate the Wireless Zero Configuration (WZC) whenever even if, as he always began with disabilities or order even if I set it to start automatically. It is a monumental PITA.
When I try and connect to the ADSL wireless router (Belkin N150) using the Toshiba Software, I get the message error "application from another provider is controlling the wireless adapter.
I get all the time, even though I turned off Microsoft Wireless Zero Configuration (WZC).
I thought that Windows controlled always somehow it even though I disabled WZC, so after reading solutions in other posts, that I tried to go...
-> Control Panel-> network connections-> wireless-> properties-wireless networks tab > uncheck "use Windows to configure...". ».
But unfortunately there is not 'the wireless networks tab' in there, all I have is the other two tabs. And since trying to use Toshibas software to connect wireless using their Radar thing, now when I click the wireless network connection in there the message "Windows cannot configure this wireless connection. If you have enabled another program to configure this wireless connection, use that software. »
Can someone on the forum or using Toshiba please?
Thank you
John
Two years? Sorry, but I can't believe it.
If everything is Ok and I mean if there is no hardware problem you n t need more than two minutes for the WLAN configuration.
As a first step, you must be sure that the wireless network card is installed correctly (Device Manager).
Wireless network card must also be enabled correctly (switch > check FN + F8 > check ConfigFree tool).
When the wireless network card that it is correctly enabled scan (check the status of ConfigFree) the area with RADAR option in ConfigFree.
You will find this option?
You can scan the area?
Some WLAN is visible for your laptop? -
laptop keyboard stopped working after Windows update.
have a toshiba satellite A505 laptop and the keyboard stops working after Windows Update reboots. We reinstalled Windows 7, which fixed the problem until the updates have come. Now the keyboard is unresponsive. Sounds like a software problem, no material. Also checked the keyboard drivers that are up to date.
As a first response, go to the control panel, device, keyboard, keyboard Manager and right click, uninstall it and let it rediscover Windows and then reinstall it.
It suits it much of the time.
-
Sony laptop keyboard not working not
Hello, I have a computer laptop sony vaio, model name of windows 8: SVE1512B1EW and the keyboard does not work properly. I can not type letters & numbers and even the rear space does not work. What should I do? Please help me...
Hello, I have a computer laptop sony vaio, model name of windows 8: SVE1512B1EW and the keyboard does not work properly. I can not type letters & numbers and even the rear space does not work. What should I do?
-
My Toshiba laptop does not work
I don't have a Toshiba Satellite laptop model. PSAFGU-03J002.
I was updating to windows Vista, the usual update reminders. When he finished the due computer reboot again, but she does not restart in its usual settings. I tried safe mode but it turns off automatically and takes me in Startup Repair where I wanted it restore the usual parameters when it worked, but it takes more than two hours and he has not yet return to its regular settings.
I can't even log. And, I do not have the original recovery disk came with the laptop, because it served as a second hand. I'd really appreciate it if someone responds, I'm not computer savvy, but I need it also works and this is my last option, because I have to come to the final and I can't pay right now for computer technology.
Help, please!
To be honest I did not understand what you did, but I imagine that you have started your computer in safe mode and tried to roll back OS to an earlier time using System Restore tool. Right?
I want to say that if this help not scared, you need to install the OS by using the facilities of Microsoft disk.
All the necessary drivers, which you can download at Toshiba support and download page. -
Computer Toshiba laptop does not work after the lid slam... Help please!
This problem with a Toshiba - windows vista laptop began after the cover was closed too hard. When he was conducting swiched, instead of going to the usual blue screen, the screen was grey and a message would come in saying ' it installed program cannot start. " Click ok to stop the computer", as I could not get into windows at all, I took the drastic step to insert the recovery disks that came with the laptop to launch new and see if it worked (a cell phone factory default is is better than nothing).
In any case during the process, which took a very long time, I got messages such as not found HDD1 also say there not enough space to recover. Then I got x:\windows\systems32 and nothing else it got stuck on that for centuries, because he just asked me to check the disk, but I couldn't because I couldn't get a windows session, I looked online and saw something similar to my prob and says type chkdsk c:/f I did after recovering past for much longer afterwards I had to stop at 80% , because there is no room in the end and now I don't even not the blue screen.
As soon as the laptop is turned on, it says, could not start windows. A recent hardware or software change might be the cause to fix the prob insert your windows installation disc. But it won't let me, I get just the same message and also it says File\Windows\system32\drivers\Wdf01000.sys and the State: Oc00000e9 and Info: Windows could not load a critical system driver is missing or damaged.
Please help me if you can, my daughter really needs the laptop works again for homework, thanks a lot
Thank you for taking the time to answer, I think that will be my next move, was hoping I wouldn't have to take to a repair shop, because you never know how it will end up costing, there may be more damage than all formatting, thanks once again :)
-
Laptop keyboard not working not not to logon windows 7
I recently installed Windows 7 on my laptop and everything seemed ok. For about a week now, however, the keyboard does not work on the logon screen. So I can't send the Ctrl + Alt + Delete keys. The mouse still works and the keyboard works at boot because I am able to choose Safe mode or start windows normally. I always stopped abnormally before getting the keyboard works. What should I do?
What do you mean. "stop abnormally before getting the keyboard works." He works the next time? What happens if you connect an external keyboard?
You can view f the manufacturer of the laptop has a driver Windows 7 chip set available.
-
Computer Toshiba laptop will not collect CD/DVD player
Toshiba Satellite L305D-S5897. All of a sudden my laptop had some problems to stay connected with my CD/DVD drive. Its a Matshita dvd ram uj 850 s. sometimes, he disappears on the no hand, unexpected. I played a game yesterday and the game comes close to the top on its own, not even an error note or anything like that - it lacked the drive. I already tried Microsoft fix - it program and it usually solves the problem, but after a few minutes or something, his party once again. And then the register, there was only a higher filter, not a lower filter, and I deleted it. I restarted my computer, and I saw the disc written twice in my computer, then they both disappeared. And finally, I deleted iTunes because of what I read about it affecting the status of the drive. Helped for maybe an hour or two, then he disappeared. Are there other ways to solve this problem? I hope this is enough information.
Hello
iTunes and others, especially when there are several, CD/DVD programs will compete
for resources that can lead to strange problems with readers. You have more than a couple
other than the features included in Windows?Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================================
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html===============================================================
If necessary:
Check with Toshiba support, their drivers online (update or reinstall) and their known forums
problems and possible solutions.Toshiba - Forums
http://laptopforums.Toshiba.com/Toshiba - Contacts
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contactToshiba - drivers - access your model
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=downloadToshiba - Support
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jspI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Maybe you are looking for
-
PC freezes with answers do not message
ORIGINAL TITLE: Why am I DNon messages that responded to the questionnaire not mater what progam I am on my pc freezes and I get a message not responding
-
Why is registration of acer, the customer service failure in the era of computing V7ultrabook
good, but before you brag about the virtues of acer, my product would not be registered, will appear not in the portal and although the machine is all new acer care is not available to me you wonder why they don't get a computerized system My Word to
-
How can I connect my usb modem to my linksys WRP400G2 router
Is anyway it can be linked, perhaps through an adapter?
-
BlackBerry 10 Question on update to OS using the ADF.
Question some time ago, I upgraded my Blackberry OS using the ADF. Everything installed properly, but I found two questions. One was could not download and install the driver from SD card (SD card is 64 GB) the second was Assistant of Blackberry does
-
Remove accidental installation of a 2nd copy of Win7
Inadvertently, I installed a second copy of Win7 on my computer. I was not able to find a way to delete the second copy