Odd results when trying to expand disk space - help please

Similar Questions

• To get this message when trying to install itunes. Help, please

  An error occurred during the iinstalling of "Microsft.VC80.CRT.type ="win32".version ="8.0.50727.4053".publicKeyToken ="1fc8b3b9a1e18e3b".processorArchitecture =" amd64"'." See Help and support for more information. HRESULT: 0X800736FD

  Hello

  You meet this 0x800736FD Errorhresult when there is a problem with the update of Windows. Follow the steps mentioned below.

  Method 1:

  Check for windows updates, if there are failures updates installed on the system. Follow the steps mentioned below.

  a. click on Start menu and type start Windows updates in the search box and press on enter.

  b. click on view history and check the status of the updates that have failed and let us know the number of KB.

  c. click on installed updates and uninstall updates that have failed to install on the system.

  Reset windows update components follow the steps mentioned below.

  Method 2:

  I suggest to reset the Windows Update components and then check if the problem is resolved. See the article mentioned below.

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/0c631521-768b-4057-982c-c7108bdadeb3

  Once you have returned to zero update of Windows Installer components all updates that have not been properly installed on the system and try to install I-tunes again and check if you are able to install it on the system or not.

  Method 3:

  I suggest to run a SFC scan and check for violations of the system, see the article mentioned below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  To further support check article mentioned below.

  http://discussions.Apple.com/message.jspa?MessageID=11885536

• I use creative cloud in order to download the trial of Photoshop on my pc but this error:-Instillation failed. Not enough disk space. Please free up space on C and try again (-30)

  I use creative cloud in order to download the trial of Photoshop on my pc but this error:-Instillation failed. Not enough disk space. Please free up space on C and try again (-30)

  I entered the settings of cloud and told to download for my largest drive E (which it fine for lightroom) but it only downloads on drive C (small disk almost full) for Photoshop. I missed something or is this a bug?

  Thanks in advance

  Shared resources and temporary files will be stored on your primary drive.  If a lack of disk space prevents installation then make sure you have enough space on the main drive for temporary files and installation files extracted to be placed.

  Guinot

• Today I bought a new Mac that does ' t have a cd/dvd drive. I also bought Adobe photoshop elements 13. Is it possible that I can install this without using the provided disks? Help, please

  Today I bought a new Mac that does ' t have a cd/dvd drive. I also bought Adobe photoshop elements 13. Is it possible that I can install this without using the provided disks? Help, please

  http://www.Adobe.com/downloads/other-downloads.html can help

• Not enough disk space. Please try and clear up space

  I try to install CC from the cloud app, but it continues to tell me about a low disk space on 'Untitled '. I don't have a player of this name, and there are 25 GB free on my main drive on that I'm trying to install them.

  It becomes really frustrating because it has happened with the Manager of Adobe tools.

  We do not know anything at least some basic system information. And 25 GB is not much. All CC combined already apps will take about 12 GB and that does not even account for temporary files during the download and installation, so you can indeed have "insufficient disk space".

  Mylenium

• In many patches take all my disk space hard please help!

  OK, please bear with me I just bought a netbook opportunity got it home worked auto updates had 19 updates when he finished my hard disk was full. When I looked in my computer local disk c: first thing I see is much and much, much more numberd records as 5a735f253b9bc51711e287c each with files numberd of as 1025 to all the way up to love 3082 and also a patch file containing windows install and fix header Installer watermark ect... My question are these nessassary all I mean that fixes made before I bought it now that I updated xp houme edition of net framework 1.1 up to the net frame work 3.3 service pack 2 and if not how can I get rid of this? under control panel, add remove programes I had like a minute of the constant decline of scrolling of windows security update patches and other microsoft updates that I have no ideal what they are. and Oh yes I really need for Dr. watson on windows xp, I want to say I've had two other PC with xp and it is not on them... Help, please!

  Please note this is only for Windows XP and is not on Vista or Windows 7

  Folders that have uninstall as part of the name (for example $NtUninstallKB282010$ who reside in C:\windows (hidden files) are window Hot difficulty updating folders/files) can be removed safely (providing ever, you wish to uninstall the updates). I recommend you leave these records for a period of at least one month to make sure that the update works correctly.

  These updates can be removed individually or together. To learn more about the update/s go on:
  http://support.Microsoft.com/kb/xxxxxx
  NB: XXXXXX = the actual number, not to mention the "Q" or "Ko."

  Once you have removed the uninstall folders/files, then go to control panel, add/remove programs. Select the title of the corresponding Windows fix on the folder/file of the patch you just deleted, and select Delete. You will get a Windows error. This is because you deleted the uninstall folder/files. Simply choose OK and the entry will be removed from the Add/Remove Programs list.

  Don't NOT delete the folder $ $hf_mig

  Cleaning after installation of SP2
  http://aumha.org/win5/a/sp2faq.php#after

  and/or

  XP SP3: Post Installation Cleanup
  http://aumha.NET/viewtopic.php?f=62&t=33827

• 50 + concerts using export. Fails due to being of full disk. Help, please?

  I export a 12 min vid, with effects of filter and the intro/outro music. All the files that make up less than 7 concerts. Estimated export file size is 944 MB. I have out of my 50 GB of disk space at the time the export is 25% complete.

  When I export, I choose:

  1080 p 29.97 fps H.264.

  Low flow: less than 15

  Export to an of 2 TB external HARD drive

  OS: Mac OS 10 Yosemite

  By car: 120 Gig SSD (50 GB space)

  External: 2 TB Western Digital (7200 RPM) to the format ExFat

  Version: Premiere Pro 8

  Video source captured on a Canon Vixia Mini X

  I already deleted cached data. Closed all other programs. Restarted several times.

  What I am doing wrong?

  ExFat.

  I have figured out. I broke it upward into six 2-minute videos, and while I was exporting those I noticed that the clips with the intro and outro are exhaust disk space. These are the only parties with video accelerated. I'm almost certain that the accelerated video is the culprit. Is there a way to get around this?

• After my 10 updated iOS even if I am connected to view the content I have cloud and iCloud when I try it asks me to put in place when already established sound upward. Help, please

  After the last update of iOS10. Even though I am connected to iCloud when I try to display the content he asks me to implement the iCloud. Can anyone help please.

  Try to perform a restart- restart your iPhone, iPad or iPod touch - Apple Support

• Trying to expand the space system restore automatic gives error 0x8007007B

  I just had a problem with a driver and wanted to use system restore.  To my great regret, my computer did not a single restore point.  When I went to do it manually, I found that its maximum use was 0% for the restoration of the system in the C drive.  I tried to increase it, but every time I press on apply or ok (an increase of any amount) the following message appears:

  "Could not apply the settings for the following reason: the file name, directory name or volume label syntax is incorrect." (0x8007007B).
  When I press ok, he said: "there was an unexpected error in the property page: (same message as above).»  Please close the property page and try again. »
  I've done the obvious reboot and so on, and it allows me to create a manual restore point, but won't automatically set restore points or be it me to increase the disk quotas.
  Any help would be greatly appreciated.
  (I use a clean install of Windows 7 Professional 32 bit, on a 3 GHz Pentum D, 1 500 gb SATA I partitioned the drive, 4 GB DDR2 and standard components, no software or special equipment).

  Hi sss68,

  Welcome to Microsoft Windows 7 answers Forum!

  The error 0x8007007B occurs when the system is configured to store restore points to a location or a bad way.
  Set the path to the appropriate Windows 7 restore point.
   
  To remove this error , perform the following solution:
  To set the path of the appropriate Windows 7, restore point as follows:
  1. click on start.
  The Start Menu appears.
  2. type sysdm.cpl in the start search box and press .
  The user account control window will prompt you for permission to run the program.
  3. click on continue.
  The System Properties window appears.
  4. click on the System Protection tab.
  5 under automatic restore points, clear all invalid location or duplicate
  6. click on verify drive C: with the Windows Logo
  7. click on apply, and then click Ok
   
  Create a system manually restore point:
  1 open the system by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then click System.
  2. in the left pane, click System Protection if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. click on the tab System Protection and then click on create.
  4. in the System Protection dialog box, type a description, and then click on create.
   
  Follow the document below for additional guidance on the creation of System Restore Point:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-restore-point

  It will be useful.
   
  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum.

• Lost disk space * help

  I have a Windows 2003 R2 cluster with SAN attached storage.
  
  The drive in question is 300 GB, I use about 90GB but he reports 80GB free space went?
  
  I use this partition for rmans and archivelogs, I have problems with the rmans for the moment so I keep running out of space and fight to keep the archivelogs will.
  
  Its been formatted with oraCFS.
  
  Oracle 9i.
  
  Any help would be great.
  
  Thank you.

  m_sanchez wrote:
  OK, so a little update.

  I install the new drive and formatted with ocfs.

  I ran the ocfscollect.exe utility to verify that the disc is damaged I used the ocfsformat.exe of the configuration partition.

  It is true that I looked through the docs on your supplied terms site keys on what I was looking for.

  I found the files init with the current settings, you're talking about.

  In order to confirm that I could use the "alter" system to be updated on the fly, but I must also update the init file to make the changes permanent. But if I specify "SCOPE = both" it will be updated on the fly and update the init file?

  ALTER SYSTEM SET log_archive_dest_1 = 'X:\archive\inst1' SCOPE = BOTH

  Seeing how I have several sites I could just run this command again to set the location 2, I guess I can?

  I check to see if I'm on the right track and see if you flame me :)

  Thank you.

  No flame. You did your search insead of whining. :-)

  scope = two updates to the running instance and the spfile. Update the spfile makes persistent change, as it will be picked up on the next reboot.

  I guess that by "several locations" you are referring to several locations of loc_archive_dest... Log_archive_dest_1, dest_2, des_3, etc. If so, Yes. Each is a separate init parm and they can all be updated by the same technique.

• I'm trying to configure icloud with my pc/outlook.  I can not get the calendars and contacts in sync.  they do not speak with each other as they did when icloud was not enabled. Help, please.

  How can I configure icloud on my iPhone and a windows PC?

  Have you followed these steps?

  http://www.Apple.com/icloud/Setup/iOS.html

  http://www.Apple.com/icloud/Setup/PC.html

• Whenever I try to install my free download of Photoshop CC (2014) I get the following notification: "not enough disk space. Please free up space on D and try again (-30)

  See above. Can anyone help?

  Looks like you don't have enough memory.  See min-requirements below.

  System requirements | Photoshop

  Nancy O.

• Restoring files of Windows Vista does not work - I have tried many, many things. Help, please.

  Hello

  I did a windows vista upward from some directories of laptop for my ReadyNas Storeage via the network.  The backup is is about 8 times before the hard drive on the laptop crashed.  We are unable to recover the HARD disk for thought I would recover from the laptop.

  Here's the problem:

  I use Windows Restore - Advanced Restore to try to recover from the previous backup.  After some fiddling, I am able to see that the program of restoring Windows backup sets.  I'm trying to restore all files to their original location.  The restoration done some preparatory work and then get the error message: Restore did not complete successfully. Error code: 0x8100001A

  Here is what I tried:

  (1) find the original Mediaid.bin file and copy it to the root.
  (2) run the following process to rebuild the mediaid. http://social.technet.microsoft.com/Forums/en-US/itprovistaapps/thread/56f5ed9b-8722-4fa8-b1e9-9c17d7132feb.
  (3) have successfully used windows Explorer to extract a single file.  (backup stuff windows are stored in zip files).  Problem, this only works for files below a certain size because I don't know how to merge files voluminous back.
  (4) copied the backup set off the ReadyNas to a USB to load from there.  It worked only when the USB, I have shared on the network.
  (5) have shot a question at JustAnswers, but they have not as well.
  (6) tried to restore a previous backup set but also failed with the same error message.

  Any help would be welcome.

  Thank you

  Hello

  for similar issues, see the links below and check.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/b489c071-cb79-4893-8942-188e20ed6f09

  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/5e368f95-5142-4B9F-AFB2-ccff9b646433

  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/d7717978-290A-4f29-8e2d-5f6de0ebe0ff

  It will be useful.

• trying to figure out! Help, please!

  anyone

  Please help if you know!
  so yday my computer stops on me, then when I tried to put it back on the screen read ' confuguring udates 3 3 0% complete "then after awhile it would turn off, restart and start the to new to be on the"Configuring updates"screen..."

  I am looking for drives reovery vista for a British computer, and if anyone knows where I can get an of I would like to make it so!

  I don't know what's going and I tried again and again and he doesn't stop!
  Please help, I'm not very good at comps!
  Thank you

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Hi, my samsung laptop already with windows 8 is not read my games cd disks? help please?

  its does not show when I go on the computer and even when I click on the dvd player it says insert disc. I tried to open it with internet explorer, bu without result. If it's important, the game cd that I play more often are the tycoon series. BTW, there is no episode of windows 8, he has already been given. Thanks in advance.

  Ive also tried using the cmd command prompt and using this long code and restart but it did not work. It shows the dvd player, but the game is not there.

  Hello

  Thank you for the update.

  I suggest you to contact Samsung support to get the drivers for the CD/DVD drive and install them. They will give you information on the replacement of the physical part. When you install the drivers, you will find them in the Device Manager as well.

  You can follow the steps in the following article.

  Discs will not play correctly

  http://support-us.Samsung.com/Cyber/popup/IFRAME/pop_troubleshooting_fr.jsp?IDX=40333&modelname=NP520U4C&modelcode=NP520U4C-A01UB&session_id=&from_osc

  If the problem persists, then I suggest you to contact Samsung support for any future reference.

  http://www.Samsung.com/us/support/contact

  Let us know the status of the issue.