ODI error - no value to set this variable when the scenario planning

Similar Questions

• Action of the trigger to set time or when the audio is finished?

  Is it possible somehow form to trigger an action at a certain time or when some audio is over? It is built in function in the Storyline articulate so I wonder if Adobe wizards have figured this out.

  I'm looking to adjust a variable when the voice-over that basically says that the slide is complete is complete. I know how to do this with buttons and on the output but even on the output does not work properly because the user can leave the slide without completing the audio.

  You would probably need to build or buy a widget.  There used to be a widget that could be used to perform actions based on time.  It is listed on this page:

  http://www.Infosemantics.com.au/widgetking/the-widget-pages/

  However, I do not know if there is a compatible with Captivate version current version 7.  You must ask the Director Jim Leichliter.

  http://captivatedev.com/2012/09/26/adobe-captivate-6-0-free-widget-time-based-actions/.

  In addition, since it is a SWF widget it would be not compatible with HTML5.

• MS Photo Gallery, how can I activate the "do not show this again" when the dialog box appears whenever I try to download a picture to another location?

  How can I activate the "do not show this again" when the dialog box appears whenever I try to download a picture to another location?

  The dialog box that appears frequently when I try to convert or download photos, shows the shadow of this question - I want to make it active until the times dialog box stops appearing I scroll the photo folders.

  Thank you

  I got the last part of what you wanted, which was simply not the message

  The key is that you have to allow this program through your windows firewall.

  Go to your look for the windows Firewall Control Panel,

  There should be a list to allow a program through windows firewall, look at the top left.

  If you feel safe doing this, vlc is not one that I would feel safe with, but to you, it has a function to browse to find the program to be added to your trusted list or access through your firewall.

  Still, it may give you a warning but could release the message?

• set a variable to the sum of 2 variables

  Hello
  How can I set the value of the variable is the sum of a + b in a package
  I get on the error message
  java.lang.NumberFormatException...
  
  Thank you
  Eyal

  Hello

  You need to "Refresh" the variable. You can only 'Set' constant. For example, I have variables a, b. In a package 'Set' a = 1, b = 2. Then 'Refresh' variable c as

  Select #a + #b double

  Checks if the value variable historized c = 3

  See you soon

  BOS

• How to set a variable when loading a flash application

  Hey there all,
  I am very new to flex and flash programming.
  I have an app that I need to specify a certain variable for during the application of the first charge up.
  The .swf file must be able to start with a certain set of variables (as with a command line argument)
  Because I'll be incorporation in markers on google maps. They need to know where and what they are by variables that I spend when they are first initialized
  
  I hope this question makes sense,
  
  Shawn

  You can send the query string values and access it from your flex application. Below is the URL of the page that describes how to access the query string parameters in a Flex application
  http://livedocs.Adobe.com/Labs/Flex3/HTML/deep_linking_5.html#245869
  I hope this helps.

• How to set a variable in the main timeline of in a symbol?

  Just get started with Animate and coming from Flash, it may be apparent to my question. How do you define a variable for the main timeline of in a symbol?

  I have 24 pairs of clickable elements, each in their own symbols, and 24 of these symbols to sit inside another symbol. I want every 24 to set the global variable even when you click on it. I do not find that this question is anywhere, which makes me think that I can be stuck in a mentality from Flash and approaching the task in a bad way. (However, there are MANY discussions address showing how objects to different levels in the hierarchy.) Which is well covered).

  By the way, how to access a function on the main timeline of in a symbol?

  Adobe should consider putting on foot (or pages) support just for people migration form Flash. In the documents that I've met so far there seems to be a studied effort to refrain from mentioning Flash somehow. I imagine that there are many people out there like me who have a deep background in coding Flash, but start with Animate. We don't need help with most of the basic concepts, but we still have some pretty basic questions on how to achieve certain things in Animate because our knowledge of Flash gets in the way.

  Hi Bill,

  There are a lot of discussions here on the scope, but here's a way to create a global variable:

  code on Stage.compositionReady

  sym.myGlobalVar = 1;

  Then, anywhere in your project, you can check/set this var as follows:

  sym.getComposition () .getStage () .myGlobalVar = 2;

  And here is a way to create a global function:

  code on Stage.compositionReady

  sym.myGlobalFunction = function() {}

  Console.log ('myGlobalFunction');

  }

  Then, anywhere in your project, you can call this function as follows:

  sym.getComposition () .getStage () .myGlobalFunction ();

• Not able to download error summary "could not perform this operation because the mail by default is not installed correctly"

  Victorinox original title: Windows problem

  Im a senior looking for a job. When I'm craig's list and to to load my windows exployer RESUME come with a window that says "cannot perform this operation because the default mail is not properly installed. Can someone give me please a detailed step by step procedure to solve this problem?  Thank you so much Denny

  Hello Denny carguy,

  -Who is your provider of mail service?

  Windows XP has the default Outlook Express e-mail client. To send and receive emails using Outlook Express, you must configure it.

  See the links to find out how to set up Outlook Express in Windows XP.

  How to set up Outlook Express

  Microsoft Outlook Express

• Fill in a PDF form, but get "Error opening URL for submit this form" when I try to

  I was able to fill the form with Adobe Reader, but when I tried to send the form another box popped up that says "Error opening URL to submit this form." What can I do to fix this?

  Nothing. Report it to the authors of the form.

• Set a variable to the result of an instruction select

  I create a list view of the numbers that I have in the system. I'm doing a table with only a list of numbers from 1 to whatever number max is in view. IIf 89 324 is so the last number in the system, so I want a table with 1 thru 89324. Then I can use the NOT EXIST to determine what numbers are miissing in the system. so, if 1 to 200 are not used, but by 89 324 201 is used, then I want the output to 1,2,3... 200.
  
  The code to make the display works and the code to create the table is good, the loop works when I use a number defined for example 100. I just have problems affecting a variable in the number max.
  
  Here's what I have (which of course does not)
  

  CREATE OR REPLACE PROCEDURE test IS
  
  n number := 1;
  maxNum number;
  BEGIN
  
  execute immediate 'create view check_numbers as
    select num from table1
   union
    select num from table2
   union
    select num from table3';
  
  maxNum := EXECUTE IMMEDIATE 'select max(num) from check_numbers'; --I also tried taking out the EXECUTE IMMEDATE here and it still did not work
  
  WHILE n <= maxIpid LOOP
       insert into numList values(n);          
       n := n + 1;
  END LOOP;
  
  --Here I will put in the code to compare the two and display the numbers that are in numList but not in Check_numbers
  
  END;
  /

  Published by: james3302 on August 11, 2010 15:59

  James,

  The solution to your immediate problem to get the result of the immediate execution in a variable is to use

  EXECUTE IMMEDIATE 'select max(num) from check_numbers' into maxNum;
  

  You can also do without running to the immediate assistance

  select max(num) into maxNum from check_numbers;
  

  Of course, you should definitely consider using one of the other solutions already provided.

  Depending on what you ultimately trying to reach, another option to consider is to get the list of discrepancies between the numbers to help
  Method of Tabibitosan of Aketi ({: identifier of the thread = 1005478}).

  with t as (
  select  1 as n from dual union all
  select  2 as n from dual union all
  select  7 as n from dual union all
  select  8 as n from dual union all
  select 11 as n from dual
  )
  select * from (
  select grp, n1, n2, 1+lag(n2,1,0) over(order by n1) as gap_n1, n1-1 as gap_n2
  from (
    select grp, min(n) as n1, max(n) as n2
    from (
      select n, n - row_number() over(order by n) as grp
      from t
      )
    group by grp
    )
  )
  where grp>0
  order by grp
  ;
  
  GRP                    N1                     N2                     GAP_N1                 GAP_N2
  ---------------------- ---------------------- ---------------------- ---------------------- ----------------------
  4                      7                      8                      3                      6
  6                      11                     11                     9                      10                     
  

  Kind regards
  Bob

  Published by: BobLilly on August 11, 2010 15:00

• Follow this procedure when the Sansa Connect recovery tool does not work!

  Hey people;

  This thread is just to consolidate the info from a lot a longer wire, earlier.

  Currently, the Sansa Connect recovery tool may or may not work for you.  You can see an error like 'failed to connect to the Internet' or "cannot retrieve the device, SanDisk contact technical support for assistance."  If Yes, it's probably because the recovery tool is unable to download the firmware images he needs zing.net.  SanDisk has not (yet) recognized this problem.  The strange thing is that * sometimes * recovery tool works, if you already have images of the firmware on the drive... but usually it doesn't.

  So here's what you do (with thanks to Larlos for providing the firmware images and order lines to their installation).  This assumes that you're 'stuck' to the "necessary recovery" post on your connection.  If not and you are in the regular menu of Sansa Connect, first follow steps 2 and 3 in this paper: http://mp3support.sandisk.com/tools/connect-recovery-instructions.pdf, do the following:

  (1) download the zip file containing the images of the http://www.megaupload.com/?d=UNLDGZ1N firmware

  (2) search for the following files in the zip file, and then copy them into the directory of your drive "C:\Program Updater Connect Device Recovery\cmdline":

  • everest_initrd_ext_prod_1.1.1.50239.SRR.e
  • everest_vmlinux_ext_prod_1.1.1.50239.SRR.e
  • yeverest_zap_ota_rel_1.1.2.65799.tar.gz.e
  • yeverest_zap_ota_rel_ext_prod_1.1.2.65799.SIG

  (3) in the same directory, create a file named recovery.bat that contains the following three lines:

  zsi_fw.exe w everest_vmlinux_ext_prod_1.1.1.50239.srr.e everest_initrd_ext_prod_1.1.1.50239.srr.e

  zaprecover.exe t 600000 f yeverest_zap_ota_rel_1.1.2.65799.tar.gz.e yeverest_zap_ota_rel_ext_prod_1.1.2.65799.sig

  pause

  (4) connect your Sansa Connect USB.

  (5) run the recovery.bat file (double-click it in Windows Explorer, or run from a DOS command prompt).  The line of 'pause' is there only so you can see the results of running if you run it from Windows Explorer.  Expect the recovery to the end; at the end of that your connection will restart.  If Windows displays the hardware wizard detected during this process, simply cancel the wizard.

  whturner wrote:

  Thanks for the help - it updated my white box to connect to the WiFi and after registration on Yahoo (without choosing any service, just updated my old email and user ID) I now INet radio with a number of stations that work fine on my home wireless network. To do this, DND to explore and syncs with WMP OK. A few quirks that I wonder about.        (1) after the firmware update, my ZAP showed that 1.2.0.58335r and OS = 1.2.0.58835 - NOW (the next day), it changed to ZAP = 1.1.2.65799r and 1.1.1.50239 = OS. Every thing seems to work even though; I have a firmware download while I was playing with the INet radio?     2) there is also a new menu item "Server Zing" that lists the name of the module, the version, and the primary and secondary server. Is this normal?  (3) what Yahoo service I - I see a small Y! symbol at the top right of the screen.                                                                                                                                               Thank you very much and congratulations Warren

  (1) no; you see the version numbers are associated with the files of the firmware (names starting with "everest" and "yeverest" files) that you have either downloaded when you ran the recovery tool, or download in megaupload.com zip file.

  (2) Yes, it's normal.  Zing is the company that allows you to manage authentication of audio stream and firmware for the connection.

  (3) the Y! symbol indicates just that when you use the Internet Radio feature, you are streaming audio of Yahoo (in fact, now owned by CBS Radio).  There is also a function of Flickr photos, which is associated with Yahoo.

• error message "coordinates would not be saved" when the contact info is correct.

  original title: error message

  "contact information could not be saved" when the contact info is correct.  Happens all the time on this computer

  You will need to create a new post on the Windows Live support for assistance site: http://windowslivehelp.com/forums.aspx?forumid=28aff142-9106-4d74-be08-9b5d9fc0efea

• Get the values of default table row when the page loads

  Hello

  I am running JDev 11.1.1.7. We have a page that contains two tables in a relationship of the master / detail of nickname. We can do a real master ADF / detail with view items related because the query for the 2nd table is complex and works best when queries with binding settings. The View object for the 2nd table has a request with 2 link params as it can get in the first table. Thus, when a line is selected in the first table we want to execute ExecuteWithParams on the object from view of the table 2. We do it in the Bean managed for the page in a method that is the selection to the first table listener. It works fine except when the page initially loads, the first line is selected by default. When the default value is selected the selection listener is not triggered.

  I've seen the suggestion of not having a line selected by default when the page loads by removing the value selectedRowKeys on the table. However, we do not want that the 1st row of the table secondary master to be selected by default and we as the table of detail to show the correct corresponding lines.

  Steve

  Steve,

  Not really sure when you say that the 2nd table is complex and may not use the master detail. If the settings link in the parent table, you can set the ViewLink accordingly and it should work, right?

  In any case, if you're after the execution of methods on the loading of the page, you will find the links below.

  If it's a working group, you can add a methodCall as activity by default and UTF, you can use phase listener (if listener server does not).

  https://blogs.Oracle.com/aramamoo/entry/an_epic_question_how_to

  Advice from the Oracle Johny: ADF: how to run the ViewObject with a ViewCriteria on the PageLoad in Application Web ADF

  It will be useful.

  See you soon

  AJ

• How to set a Variable with the data Srouce store data

  Hello ODI Experts.
  I created a physical & logical schema and a Data Source store collection data to a database table.
  
  On the other hand, I have a little variable I'll pass in a web service call (ODIInvokeWebService tool).
  
  Yo please guide how do I set up my store of data source variables.
  
  Thank you and best regards,
  Arfaoui

  Hello

  You can close this thread you opened another for your question.

  To answer you second point, it depends on what you select. You can use the function list_agg of values separated by commas if you wish. Or add/edit you WHERE to ROWNUM = 1 to clause example

  See you soon

  BOS

• Set a variable to the selected path name Photoshop

  I am trying to assign the name of the currently selected Photoshop (like, normal) route to a variable.

  I can do it for an artLayer as follows app.activeDocument.activeLayer.name; but I searched the web a way to isolate the active path.

  Could someone help with this?

  Thank you

  Limey

  Ah, I misunderstood.

  This might help:

  determine the path selected, set to day 09.2015.

  function selectedPath2015 () {}

  try {}

  Var ref = new ActionReference();

  ref.putProperty (stringIDToTypeID ("property"), stringIDToTypeID ("targetPathIndex"));

  ref.putEnumerated (charIDToTypeID ("Dcmn"), charIDToTypeID ("Ordn"), charIDToTypeID ("Trgt"));

  var docDesc = executeActionGet (ref);

  return app.activeDocument.pathItems [docDesc.getInteger (stringIDToTypeID ("targetPathIndex"))]

  }

  catch (e) {return undefined}

  };

• After 20-30 minutes my computer crashes with a blue error screen and then reports an error on the desktop on restart, this happens when the desktop is idle or playing games, I get the below error

  Signature of the problem
  Problem event name: BlueScreen
  OS version: 6.0.6000.2.0.0.768.2
  Locale ID: 2057

  Files helping to describe the problem (some files may be is no longer available)
  Mini111709 - 01.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 1000008e
  BCP1: C0000005
  BCP2: 81FA7519
  BCP3: 851D1F98
  BCP4: 00000000
  OS version: 6_0_6000
  Service Pack: 0_0
  Product: 768_1
  Information about the server: a64044ff-cd2c-4992-88b5-e4083f658b84

  Hello

  Two main causes of this blue screen video drivers and BIOS - check with system manufacturer site for
  View of the adapter (video) and BIOS, then on site of the manufacturer of the device for the last video. There may be other drivers
  in order to check there. DISABLE the auto-pilot plant as those who are older and if updates Windows suggests
  a pilot just HIDE. Antivirus is another possibility.

  See methods of update driver generic in the next message.

  BCCode: 8th 0x0000008E

  Cause

  Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If you do not know the specific cause of the exception, consider the following:

  • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

  You can solve the problems of BIOS by upgrading the version of the system BIOS

  =============================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------

  It comes to my convenience store generic bluescreen:

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.