ODI file data store

Similar Questions

• Unable to display data from a csv file data store

  Hi all

  I'm using ODI 11 g. I'm trying to import metadata from a csv file. To do this, I have created physical and logical diagrams corresponding. Context is global.

  Then, I created a model and a data store. Now, after reverse engineering data store, I got the file headers and I changed the data type of columns to my requirement and then tried to view the data in the data store. I am not getting any error, but can't see all the data. I am able to see only the headers.

  Even when I run the interface that loads data into a table, its operation without error, but no data entered...

  But the data is present in the source file...

  Can you please help me how to solve this problem...

  Hi Phanikanth,

  Thanks for your reply...

  I did the same thing that you suggested...

  In fact, I'm working on the ODI in UNIX environment. So I went for the record separator on UNIX option in the files of the data store tab and now its works well...

  in any case, once again thank you for your response...

  Thank you best regards &,.

  Vanina

• SWAP file data store remove issue

  Hello

  I'm currently moving VMs to the data store newly created as well the datastore file swap. I have already change on all ESXi hosts, the data store were swap file will reside, however, I have still a few virtual machines on the old data store. I know not if I vMotion virtual machines from one host to another it will change the location for the swap file. My question is, can I just remove the old data store without affecting production not VMs remained the swapfile on the old location? Just try to find a solution faster than vMotion every single one of the virtual machines.

  Thanks for any suggestions or comments!

  Chris

  Hello

  As long as all hosts are no longer using the data store and the cluster is not defined using volume swapfile host (rather than storing with VM) then you should be able to disassemble the old swap partition.

  Bare in mind, vMotion/svMotion a virtual computer, you must be sure to move all the files and the virtual machine is set to store his exchange with the virtual machine files. Check that the old swap partition is no longer in use, and then take it apart. In theory the fastest way is to ensure that all VMs are defined to store swap with virtual machine files to the off and on again, forcing a new .vswp file in the same device. But it would of course affect your VM availability.

  I've seen in the past that even if the volume was no longer used by the guests, that guests required a restart until I managed to remove the old Exchange store data, just in case you meet that!

• PULSE DATA STORE

  VMware dear Experts,

  If one of the esx host is then inaccessible using the Datastore Hearbeating how we identify that ESX host is down, some1 can you please shed some light on the same.

  Concerning

  MrVMware

  MrVmware9423 wrote:

  Hearbeat data store means: once we choose 2 store data Commons, thewn all slave host will cretae a file on this data store and all hosts of esxi sene send a signal to that store of data for updating the file. If one of the host slve is inaccessible to the host master esxi. to confirm that he will make the data store process hearbeating the master host will check this weather common file of this file data store is getting updated by this host of esxi slave or not.

  Ricard Sir please correct me if I m wrong.

  Yes, it's more or less what will happen, however all guests will have its own file of heartbeat on the datastore (s) of the heart rate and will update those every second. If a slave disappears from the management network that the master will look at the file of heartbeat of the slaves as a kind of "second opinion."

  If the file is intact too he will declare the slave as dead and VMs were revived.

  If the file is always updating the master knows the slave is alive, but isolated from the network. It will depend on the response of Isolation strategy what's going to happen.

• ODI-15005: data type "varchar" does not close in technology: file?

  Hello

  I created the interface that loads data from flat file (source) oracle (target).

  For this, I took LKM SQL FOR SQL and SQL TO ADD FILE IKM.

  Please check the source and target data types.

  

  When I am executing this interface, I get the error as

  ODI-15005: data type "varchar" does not close in technology: file.

  
  

  To resolve this error, I changed the types of flat file data.

  I went to the Manager of topology-> select technology of files-> data types: string - > orcle to the number data type.

  Even if I do not correct this error. Please help me.

  
  

  Thanks in advance,

  A.Kavya.
  

  Hello

  Can you please check what are the data types for the columns in your data target store. As you say it's a file, can you check if the data type for the two columns has the String value (and not varchar).

  Thank you

  Ajay

• automatic change of files to store data

  Hello

  I have a stand-alone system that works with 7 serial ports.

  I need to store a huge amount of data (115,200 Kbaud / port) because the system must continue to work for a week.

  In two days, I have a file size of over 500Mbytes. The problem is that I'm storing the data in a .txt file and then, when I want to the process, with the data, the computer laptop can´t open a file so the size.

  I can´t find a way in which the vi can change in real-time (himself) the file to store the data.
  Maybe the way is to create 3-4 files before the while loop (in which I read the data), and then change the file in which to store the data, but I can´t find a way to do it. With the get_file_size.vi that I know when I need to change the file, but how I have to do without leaving the whole loop? In my view, necessary to ensure that the visa_read.vi works...

  maybe better or another format or way to store data?

  It does not matter of data loss while changing the file.

  Someone at - it an idea?

  Thank you

  A quick...

• I need to delete files from data store. Get the message "could not open because it was in use" How can I work around?

  9 my Windows update does not work. It is said to open "Datastore" and del; files allow you updates. When I try to open the data store in a first time, I wonder what program to use, and then said "can not open because it is used by another program."  This Windows Vista bit. I can't install Explorer 9 until I have a workaround. Help.

  Hello

  What is the exact error code or error message?

  I suggest to reset the Windows update components and then try to check updates, and then install the updates and check if it helps.

  How to reset the Windows Update components?: http://support.microsoft.com/kb/971058

  Solve problems when you can not install Internet Explorer 9: http://support.microsoft.com/kb/2409098

  I hope that helps!

• Flat VMDK files after trying to delete files from data store

  I tried to delete a VMDK file in a data store, because I thought that it was not in use, and I need space. I couldn't get the VM you are looking for the name of the VMDK file, so I thought that the VM has disappeared. Turns out that someone had renamed the virtual machine, when it was actually being used, so I could not remove the VMDK file.

  I searched for the files with Powershell in a data store, and that's how I found this mysterious file in the first place.

  After giving me the error that it couldn't be deleted, the file does not appear in the search more and the name of the file has been replaced by *-dish. VMDK, I think, and the column by specifying the Type just said file, instead of virtual disk. In addition, files not included in the research more.

  Today, a day after, everything is back to normal. Everyone knows this behavior before and could tell me what happened?

  Each virtual disk is actually 2 files: VMname.vmdk and VMname - flat hard

  Unfortunately, the data store browser displays only the VMname... VMDK, but it gives the properties of VMname - flat hard. Use PuTTY, connect to the ESXi host via ssh, navigate to the folder of the virtual machine and use: the - lahtr to list the contents of an authoritarian way. You can also run: - ch to check actual use.

• Rename files within the data store

  Hi all

  I'm trying to rename some folders and files in my local data store.

  That's what I see in my local data store

  /

  TestBiz-(il s'agit d'une machine Virtuelle)

  . SDD.SF

  TestNav-(il s'agit d'une machine Virtuelle)

  Apps

  images

  TestBiz contains

  TestBiz01.vmdk

  TestBiz01 - 000001.vmdk

  TestBiz01.vmx

  TestBiz01.nvram

  VMware.log

  TestBiz01.vmsd

  Now my problem is the following.  The names of the two virtual machines must be lit.  TestBiz must be TestNav.  If I rename not only the record, but the files themselves who will break my servers?

  I am aware of the mixture to the top, but I don't want others in the future to get confused.

  Any help would be great

  Thanks in advance

  Welcome to the community,

  There was a current discussion on VMs rename (change the name of files and folders in data warehouses) which also contains links to some articles in the KB. However, in your case, the virtual machine has an active snapshot, and you should definitely remove the snapshot before you rename the virtual computer!

  BTW. where the virtual machine is managed in a vCenter server environment, you can automatically rename the virtual machine by changing the name of the virtual machine in the inventory of the GUI and then he migrate to another data store.

  André

• 0 blocks free PTR - cannot create new files on the data store

  We have been experiencing problems trying to power on virtual machines. When attempting to power on virtual machines, we see the error "cannot extend the pagefile from 0 KB to 2097152 KB".

  We checked the .vswp file are created in the folder of the Virtual Machine on the data store. Connection to the ESXi host, we have seen the following in vmkernel.log error message:

  (2016 01-16 T 21: 19:40.556Z cpu1:4971732) WARNING: Res3: 6984: "freenas-6-ds": [rt 3] No. Space - has not found enough resources after the second pass! (requis_:_1,_trouvé_:_0) 2016-01 - 16 T 21: 19:40.556Z cpu1:4971732) Res3: 6985: "freenas-6-ds": [rt 3] resources t 0, e 0, PN 16, BM 0, b 0, RCs u 0, i 0, 4031 nf, pe 0, 0 2016-01-16 T 21 oe: 19:40.556Z cpu1:4971732) WARNING: SwapExtend: 683: impossible to extend the pagefile from 0 KB to 2097152 KB.

  This was surprising given that we have about 14 TB of space available on the data store:

  [root@clueless:~] df h

  Size of filesystem used available use % mounted on

  VMFS-5 20.0 T 5.4 T 14.6 T/vmfs/volumes/freenas-six-ds 27%

  However, when we use "dd" to write a 20 GB file, we would get "no space left on device:

  [root@clueless:/vmfs/volumes/55a00d31-3dc0f02c-9803-025056000040/deleteme] dd if = / dev/urandom of = deleteme bs = 1024 count = 2024000

  DD: writing "deleteme": no space is available on the device

  263734 + 0 records in

  out 263733 + 0 reviews

  [root@clueless:/vmfs/volumes/55a00d31-3dc0f02c-9803-025056000040/deleteme] ls - lh deleteme

  -rw - r - r - 1 root root 19 Jan 255,1 M 01:02 deleteme

  We checked that we have free inodes:

  The ramdisk name system include in reserved Coredumps used Maximum reserved free use pic free maximum allocated Inodes used Inodes Inodes Mount Point

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  root of true true 32768 KiB 32768 KiB KiB KiB 99% 99% 9472 4096 3575 176 176.

  true true etc 28672 KiB 28672 KiB 284 KiB 320 KiB 99% 99% 4096 1024 516/etc

  Choose true true 0 KiB KiB 0 KiB KiB 0 100% 0% 8 1024 8192 32768 / opt

  var true true 5120 KiB 49152 484 516 99% 90% 8192 384 379 KiB KiB KiB / var

  tmp false false 2048 KiB 262144 KiB 20 KiB 360 KiB 99% 99% 8 256 8192/tmp

  false false hostdstats KiB 310272 KiB 3076 KiB 3076 KiB 99 0% 0% 8192 32 5/var/lib/vmware/hostd/stats

  
  

  We believe that our cause is due to have 0 free blocks of PTR:

  [root@clueless:/vmfs/volumes/55a00d31-3dc0f02c-9803-025056000040] vmkfstools Pei - v 10/vmfs/volumes/freenas-six-ds.

  System file VMFS-5, 61 extending on 1 partition.

  File system label (if applicable): freenas-six-ds

  Mode: public TTY only

  Capacity 21989964120064 (blocks of files 20971264 * 1048576), 16008529051648 (15266923 blocks) prevail, max supported size of the 69201586814976 file

  Volume creation time: Fri Jul 10 18:21:37 2015

  Files (max / free): 130000/119680

  Blocks of PTR (max / free): 64512/0

  Void / blocks (max / free): 32000/28323

  The secondary blocks of Ptr (max / free): 256/256

  Drop blocks (approve/used/approve %): 0/5704341/0

  Blocks of PTR (approve/used/approve %): 64512/0/0

  Void / blocks (approve/used/approve %): 3677/0/0

  Size of volume metadata: 911048704

  UUID: 55a00d31-3dc0f02c-9803-025056000040

  Logical unit: 55a00d30-985bb532-BOI.30-025056000040

  Partitions split (on 'lvm'):

  NAA.6589cfc0000006f3a584e7c8e67a8ddd:1

  Instant native is Capable: YES

  OBJLIB-LIB: ObjLib cleaned.

  WORKER: asyncOps = 0 maxActiveOps = 0 maxPending = 0 maxCompleted = 0

  When we turn off a virtual machine, it will release 1 block of PTR and we would be able to on another VM / create the 20 GB file using "dd". Once we reached 0 free blocks of PTR, we are unable to create new files.

  Can anyone give any suggestions on how we may be able to clear the blocks PTR? We have already tried to restart all services of management on all ESXi hosts connected.

  FreeNAS is not running on a virtual machine.

  We solved the problem by finding a lot PTR blocks have been used by many of our models of virtual machine. Remove the disk models solved the problem.

• the system show my VM was running without any snapshots, but there are several delta files in data stores.

  Hello

  The system displays my VM was running without any snapshots, but in the data store, there are several delta as vmsd files, delta.vmdk files exist.

  
  

  is it possible to get rid of these files of delta file. Screenshot of PFA

  
  

  
  

  Thank you

  vm2015
  

  
  

  
  

  Create another cliché, and then use the option "Delete All" to delete all snapshots.

  That get rid of the files?

• How to reject records that are incompatible with the definition ODI 11 g data store?

  Buenas tardes.

  Como puedo girls los looking than any stupid fulfil the definition of length of atributos as hay in el data do not store? For example, in a process of integration llega a cuyo campo has a length of 50 characters first_name registro, pero base datos solo supports 40 characters. ODI in este falla y being the run y yo Necesito UN than rechace este registro y con continue the run. How I can control this event?

  Of photos muchas gracias.

  Hello

  Ah yes, I forgot about it.

  You can fool ODI by changing the logical length of the column in the data store in the model.

  In this way the I$ table will have a length of more than time and you won't have the problem.

  Kind regards

  JeromeFr

  PS: Your English is above the average on this forum, don't you worry. Most of us is not English-speaking.

• VMFS5 data store shows several errors, which suggests the corruption of the file system?

  VMFS5 data store shows several errors, which suggests corruption of system files.

  the tool allows to check the VMFS file system

  vSphere disk Metadata Analyzer (LOVE)

• Find files on the data store that have been removed from inventory, but not deleted from the disk

  I have ESXi 4.1 and with vSphere Client to manage virtual machines.

  Some of my users continue to use the 'remove from inventory"rather than the option" remove disc "in vSphere when they want to delete the virtual machine.

  This leaves the computer virtual on the data store but not used. I have since removed this privilege among the offending users but I need to do a bit of cleaning.

  I have a lot of files on the data store where users have done this in recent years. Probably about 150 records but only 80 VM listed in the inventory.

  Is there a way I can output, a report showing the data of each machine store directory in inventory so that I can remove anything not on this list? ID rather not to manually check the parameters of all 80 VM in the inventory.

  Out ideal would be something like:

  MyVmNameHere 1, \MyVmDirectoryHere1\ [DataStore1]

  MyVmNameHere2, \MyVmDirectoryHere2\ [DataStore1]

  A great tool to discover all this and much more is RVTools

  André

• Move the location of the VM swap file in another data store

  Hi all

  Was in a task to move the 1000 to the file location of VM swap on another data store which is newly assigned to Exchange us to the existing store database file that will be decommissioned.

  Eager to check if anyone has made movement swap of VM location of the files to a data store to another and that all measures taken to move.

  Require some VM downtime?

  Thanks in advance a ton.

  Yes it is possible without interruption of service to virtual machines.

  1. make sure that your cluster is configured to use swap data store specified by host

  2. take a host in the cluster in maintenance mode, change the location of the VM configuration file to point to the new data store

  3. do this for all hosts in the cluster

  When you vMotion a VM from one host to another the swap file will get moved to the new data store. Later when you take guests to the maintenance and return output mode, vMotion occurs for each computer in the cluster virtual and file is moved.