ODI repository work security problem

Similar Questions

• ODI 11 g: question of creating multiple repository work.

  Hello

  I am creating a 'development' of repository work a 'run' referential work that both related to the master repository even in ODI 11 g (11.1.1.7). I could successfully create the master repository and a working repository 'Development' but when I tried to create the second repository (repository of work 'execution') job, it appears this message - "a working repository already exists. Select Yes to reattach this repository to work. Select No crushes the repository of existing work. If I select 'Yes', then it won't let me to create a new working repository repository of work and if I select 'No' then it will allow me to create new (execution) but the former repository work (development) will become unlimited to the master repository. After completing the process of creating both repositories I can only connect to "exécution" repository work, but when I try connecting to the repository of work 'Development' is to launch the below error.

  Please can anyone suggest a solution to successfully create two directories of work related to the same master repository? I am trying to create the new repository of work performance of topology ODI.

  Error:

  oracle.odi.core.config.RepositoriesNotBoundException: ODI-10150: working with the 410 ID repository is not related to the master:

  Definition of master ID:410, name: LOW_WORK_REP_D, Timestamp:1394707069282

  Working definition of ID:411, name: LOW_WORK_REP_E, Timestamp:1394707247161.

  Some details about the rep ID:

  Master rep: 400

  Work the rep (Dev): 410

  Work the rep (Exe): 411

  Hi all

  I resolved myself. There are two problems. When I tried to create the repository of the work of the RCU and it wasn't creating the DB user for some reason any. Another problem is that I was stupid to provide the repository master IDs when creating the repository to work. So here are the steps I took to solve this problem.

  1. create the user DB for the repository to work manually using the scripts below.

  2. then connect to ODI (under the name 'Master repository' only connection)-> topology-> repositories (component)-> right click on 'Repositories work'-> new repository to work. The wizard opens and the first picture in the connection details of the user created DB (ODI_WORK_REP) and follow through.

  Scripts:

  create the user ODI_WORK_REP

  identified by

  tablespace ODI_WORK_USER default

  temporary tablespace ODI_WORK_TEMP

  unlimited quota on ODI_WORK_USER;

  Grant connect, resources, SELECT_CATALOG_ROLE to ODI_WORK_REP;

  So I've now successfully created two repositories of work (Dev/Exe) related to the master repository even. Mission accomplished

  Thank you

  Vikas.

• ODI Master\Work Repository Configuration

  Hello
  
  I installed ODI 11.1.1.7.0 (Oracle Studio), Oracle 11 g 11.2.0.1.0.
  Now I'm trying to create the master repository to which step below is made, but get the error ' valid repository does not exist in the specified connection.
  
  (1) create user ODI_MASTER using connection sysdba in oracle 11 g
  (2) connection to data integrator form filled as below
  
  Connection of the ODI
  
  LOGINNAME:-ABC
  USER:-ABC
  PWD:-XXXX
  
  Database connection
  
  User:-ODI_MASTER
  List of drivers:-driver jdbc oracle
  Driver name:-oracle.jdbc.OracleDriver
  URL:-JDBC:Oracle:thin@localhost:1521:ORCL
  
  Working repository
  
  Master repository only
  
  Please help solve the problem and also help in the configuration repository work.

  I have this book that will be great for you

  http://www.Amazon.com/getting-started-Oracle-Integrator-hands/DP/184968068X

  or the Oracle University courses.

  When you're thirsty remember fence wire.

• Cannot connect to repository work in ODI Console 11g?

  Hi, I am unable to connect to the repository work in the Console of the ODI.

  I get the error message as "unable to connect to the repository specified. . Please select a different alias, and then try again. ».

  I tried so many times. I had and I have not solved.

  Please help me.

  Thanks in advance,

  A.Kavya.

  I got the answer of gurus odi. First connecting to odi console with credentials from the master repository. To connect to the repository of work, we set up the details of working repository in tab management console odi. What ever we have given working repository details customer odi, same details are need to setup in the console of the odi. Then it won't work.

• StartScen.sh-> ODI-1423: working repository is not related to the master rep

  Hello
  
  I'm currently running a very basic case of the command-line command against the local agent:
  (using 11.1 ODI, Studio on Win7, agent on Linux RHEL5 run Oracle account)
  
  ./StartScen.sh IF_XKB_ADR_ENRICH 001 GLOBAL 5-NAME = xkagt
  
  I get the following error:
  
  ODI-1423: referential work THAT WORKREP is not related to the master repository
  
  It is quite a weird because I can't seem to find all the information from this forum or on the web on ODI-1423 error code.
  
  Also, my IF_XKB_ADR_ENRICH interface works very well from the Studio of ODI, for using the remote even very "xkagt" agent (this means everything is ok with work and masters representatives?)
  
  My odiparams.sh file looks ok because the agent starts and stops ok and working scenarios for the account of the workshop (fact the Laflamme family use different credentials to submit a work from the GUI?); the information seems to be there on the master repository driver, url, user, Word of past.
  
  I have tried to present the scenario of my PC with startscen.bat but I can't find the actual specifications of the parameter [AGENT_URL = < remote_agent_url >] (host: port?) documentation of ODI.
  
  Any help is welcome.
  Thank you

  "" "You're almost there. '"

  When you connect to the studio of ODI, you have the name of the repository work (remember in the login screen) and I think that that is passed to the agent.
  Whereas, when you use startcmd.sh, it should working repository name and one place to do that is odiparams.sh

  This error indicates that either you do not have your logical agent created for the context -
  or
  you give an incorrect logical agent as a parameter name.
  I think that you specify the name of the physical agent as a parameter. You must provide the logical name of the agent.

• Repository working is not connect you but can connect you to master repository

  Hello

  Recently, my password to the connection diagram (master repository) database has expired. I refreshed the password. When I tested the link with the master repository it is connected successfully, but when I tested connection with referential work he demonstrated an error of invalid connection sawing repository.

  
  

  Please help me in this problem.
  

  
  

  
  

  ERROR:

  
  

  oracle.odi.core.config.WorkRepositoryResourceFailureException: ODI-10182: Uncategorized exception for access to the repository.

  Could not make JDBC connection; nested exception is java.sql.SQLException: Exception occurred while getting connection: oracle.ucp.UniversalConnectionPoolException: cannot get data source connection: java.sql.SQLException: ORA-01017: name of user and password invalid. connection refused

  	at oracle.odi.core.repository.Repository.getWorkRepository(Repository.java:195)
  	at oracle.odi.core.OdiInstance.createWorkRepository(OdiInstance.java:504)
  	to oracle.odi.core.OdiInstance. < init > (OdiInstance.java:581)
  	at oracle.odi.core.OdiInstance.createInstance(OdiInstance.java:521)
  	at com.sunopsis.graphical.dialog.SnpsDialogLoginDetail.testConnection(SnpsDialogLoginDetail.java:755)
  	to com.sunopsis.graphical.dialog.SnpsDialogLoginDetail.access$ 4 (SnpsDialogLoginDetail.java:743)
  	to com.sunopsis.graphical.dialog.SnpsDialogLoginDetail$ 2.performAction(SnpsDialogLoginDetail.java:288)
  	at oracle.odi.ui.framework.event.OdiActionListener.actionPerformed(OdiActionListener.java:69)
  	at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
  	in javax.swing.AbstractButton$ Handler.actionPerformed (AbstractButton.java:2319)
  	at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
  	at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
  	at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
  	at java.awt.Component.processMouseEvent(Component.java:6288)
  	at javax.swing.JComponent.processMouseEvent(JComponent.java:3268)
  	at java.awt.Component.processEvent(Component.java:6053)
  	at java.awt.Container.processEvent(Container.java:2042)
  	at java.awt.Component.dispatchEventImpl(Component.java:4651)

  Do you use the same pattern to the work of master repositories &?

  If Yes, then you must change password in connection to the repository to work as well...

  Connect only to the master repository in ODI Studio.

  Go to the topology-> Repostiories-> repositories of work. Double-click repository work on you

  

  New window pop up on the right side. Click the card to change the password at reference work

  

• Repository master and repository work.

  Hello
  I'm new to ODI.
  
  I have a basic question.
  
  (1) what is the difference between Master repository, repository work.
  (2) when do we need to create these repositories.
  
  Thank you
  AB
  
  Published by: ABA on July 1st, 2009 22:12

  Hi AB,.

  Master repository: data structure containing information about the topology of the company COMPUTING resources on security and version of the models of projects and data management. This repository is stored in a relational database accessible in client/server mode since the various modules of Oracle Data Integrator.
  In general, you need a single master repository.

  Working repository: data structure containing information about the data models, projects and their use. This repository is stored in a relational database accessible in client/server mode since the various modules of Oracle Data Integrator.
  Several repositories of work may be designated with several repositories masters if necessary. However, a working repository can be connected with one main repository for version control purposes.

  Thank you
  Fati

• OfficeJet Pro 8610: Get the Permission of HPeprint or security problem error

  I used printing wireless for several months successfully to print from my work computer, but am now able to print to the e-mail address provided.

  The error reads 'your message was not delivered because of a permission or a security problem.  It may have been rejected by a moderatory, the address can only accept email from certain senders, or another restriction to prevent any delivery.

  The Organization rejected your message: hpeprint.com. »

  I've reconfigured my printer to my router.  Any suggestions?

  Hey @LoreeW,

  Welcome to the Forum from HP Support. I hope you enjoy your experience here.

  I understand that you have a few problems with ePrint using your HP Officejet Pro 8610 e-all-in-one printer.  I want to help you with this.

  I recommend that you first check your printer to verify its intact ePrint connection:

  • Touch the icon (webservices)
  • If you see an address @hpeprint.com, I recommend that you try to send a test ePrint from a different email domain than what you use on your work computer.  If it prints correctly, we can rule out your printer as being a factor in this particular issue.  If your printer's Web services is enabled is more, re - enable.  Any problem would occur with this, click here to access another relevant post I created.  Scroll to my suggestion re: setting a manual DNS as this tends to help by allowing the webservices where fail the normal steps.

  If you were able to send your printer work ePrint of any e-mail domain other than the one you use at work, read on.  Click here to see an HP ePrint article that focuses on the various factors that can contribute jobs ePrint not printing not.  Note that some areas of corporate email may become incompatible with ePrint due to the presence of a digital signature in the outgoing message template.  EPrint jobs you send work meet these criteria?

  Please let me know the result of your troubleshooting by responding to this post.  Thanks again for reaching out in the Forums - we are always happy to help you.  If I helped you to solve the problem and that you liked this post, feel free to give me virtual accessories by clicking on the 'Thumbs Up' icon below.

  Have a great day!

• Migration of the repository of security in a Production environment

  Hi, I use jdev11g and I'm trying to deploy and app with authentication and authorization of weblogic 10 gr 3, I'm looking at the "migration of the repository of security in a Production environment" section an i do not find these settings and other parts of this section: "
  
  fromCredStore the name of the identifying information from the source store service instance listed in the entrance to jps-default context (identified by the name of your application)
  fromPolicyStore the name of the source store service instance listed in the entrance to jps-default context (identified by the name of your application)
  srcFolderLocation the path to the file local cwallet.sso
  destFolderLocation the path to the target cwallet.sso file
  srcFolderLocation the path to the file local jazn-"Data.xml"
  destFolderLocation the path to the target system-jazn-"Data.xml" file
  
  I have no problem deployment of authentication only, the problem is when I use the option "authentication and authorization" for security, I can't log in to any user that I have defined, as the error page, I set you only identical to the login page and it returns me to the page of connection/error all the time connect with any user I defined.
  I wonder is there any link or video with an example of this, cause there seems little complex, thanks in advance.
  
  Published by: Julio IP on November 10, 2008 15:37

  Hello

  Please report to us. In fact, we are developing a tutorial Oracle for example covering the safety of the ADF. There is no video or other of the documentation

  Frank

• Satellite Pro M70 - Windows XP has stopped working - registry problems

  My M70 lost (I will follow soon!). Windows XP has stopped working, registry problems. I finished by using the Toshiba Recovery disk and reformat the hard disk. Said again there is some registry problems and crashing.

  One had similar problems?

  Phil

  Hi Phil,

  If your laptop is always report registry errors after having re-installed the operating system from the recovery disc, then it is likely that your hard drive has errors. The Windows XP registry is composed of several files (or urticaria), and the installation process will always be located in the same area of the hard drive.

  Kind regards

• I get the message "app Incredimail has stopped working, a problem caused the program will stop working - Windows will close and inform you with a solution.

  When I try to open Incredimail I get the message "Incredimail application has stopped working, a problem caused the program will stop working - Windows will close and inform you with a solution ', I have used as my e-mail for several years and never had a problem before Incredimail client.  I have gmail for my email.  You are able to help with this problem?  Thank you, June Fleischmann - my email address is * address email is removed from the privacy *

  I suggest to see if there are updates or new versions available for IncrediMail.

  If still no luck, I suggest to ask the support of IncrediMail

  I hope this helps.

  See you soon,.

  J

  

• "Symantec service framework stopped working" 'a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is removed from the privacy of available'Email

  "Symantec service framework stopped working" 'a problem caused blocking the program works correctly.  Windows will close the program and notify you if a solution is not available"

  Favorite

  E-mail address is removed from the privacy *.

  http://www.Symantec.com/Norton/support/kb/web_view.jsp?wv_type=public_web&docURL=20080917103626EN&LG=en&SEG=HHO&CT=us&PVID=nis_2009&selected_nav=5

  http://Service1.Symantec.com/support/Norton360.nsf/0/a5ae667bcb41502b6525729f002036b2?OpenDocument

  It's a Symantec/Norton problem; read the links above.

  Contact Norton Support:

  http://www.Symantec.com/en/AU/Norton/support/index.jsp

  See you soon.

  .

  Mick Murphy - Microsoft partner

• How to fix the windows live mail has stopped working a problem caused the program to stop working correctly windows will close the program and notify you if a solution is available

  In the Middle looking emails from this error appears.  Windows live mail has stopped working a problem caused the program blocking works windows will close the program and notify you if a solution is available

  Hello

  1. do you remember make changes to your computer before this problem?

  Try to start the computer in a clean boot and check if it helps: How to troubleshoot a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.

  If the boot fails, you can post your questions about Windows Live Solution Center by clicking on this link: http://windowslivehelp.com/product.aspx?productid=15

• Final Fantasy XIV has stopped working a problem caused the blocking of the program works correctly. on VIsta 64 bit...

  Final Fantasy XIV has stopped working a problem caused the blocking of the program works correctly.

  Hello

  1. If it works well before?

  2 have you made any changes to the computer before the show?

  Method 1: So that the game takes place effectively, your computer should meet all the minimum hardware and software requirements.

  Make sure that your computer can run the game.

   

  Method 2: Try to reduce (or turn off) video hardware acceleration by following these steps.

  Instruction to change hardware acceleration:

  a. open the resolution of the screen by clicking on the button start picture of the Start button, click Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
  b. click Advanced settings, click the Troubleshooting tab and then click on change settings.

  Note that some video card drivers do not allow allows you to change the settings.
  c. move the hardware acceleration slider toward none to reduce or turn off video hardware acceleration.

  Note: If you reduce the hardware acceleration resolves the issue, you may need to update your video card drivers.

  Method 3:  Updated graphics card drivers and see that helps.

  Reference:

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 4: You can also try to run the game in boot.

  Reference:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

• Purchase a new sealed copy of the upgrade of Windows Vista Edition diskette Home Premium. I found one on which the label says "for distribution in the United States / Canada only. Will this work without problems on a PC in the United Kingdom

  "U.S. / Canada Distribution only" disk for use in the United Kingdom?

  I want to buy a new copy sealed the Windows Vista Edition upgrade disk Home Premium. I found one on which the label says "for distribution in the United States / Canada only. Will this work without problems on a PC in the United Kingdom please? Thank you.

  Hello

  Yes, it will work. However I recommend to buy the disk to upgrade of the United Kingdom.

  The Windows Vista DVD upgrade that you get in the United Kingdom is different from what they get in the United States.

  Please follow the link menitoned.
  Choice of installation for consumer versions of Windows Vista (32-bit only)
  http://support.Microsoft.com/kb/932616
   
  I hope this helps.