Of device USB Brother writter
Hola, Necesito UN instalar el driver del device USB writter, UN modulo lectura-escritura tarjetas para las maquinas coser brother.
Hello
You created this thread in the English version of the Microsoft Community. Please could you click on the globe icon to the world at the bottom left of the screen and then choose your preferred language. Now create your thread again.
If you can't find a suitable language, please go here:
http://support.Microsoft.com/common/international.aspx
for other international support options.
Thank you.
Tags: Windows
Similar Questions
-
How to use ANSI C / C++ to control a device USB - 6216 BNC
Dear Sir or Madam,
I want to use Visual C/C++ (but not the .NET language) to contorl a device USB - 6216 BNC and write a simple app for a small project in my lab. What I want to do is very simple. I want just to provide a signal to exit through a channle AO and saving an AI channel input signal. I do not want to LabVIEW, LabWindows/CVI, and Measurement Studio, so that this simple application can be autonomous and does not depend on LabVIEW, LabWindows/CVI, and Measurement Studio. Can anyone advise me on what I need to do to get there?
My naïve thought is that I will follow the following steps:
- install the DAQmx drivers on acomputer,
- Connect the device USB - 6216 BNC to this computer,
- Make sure that the device is recognized by the computer, via the Windows Device Manager
- write a Visual C/C++ program to register the NIDAQmx.h and use the NIDAQmx.lib library. By the way. I found the files NIDAQmx.h and NIDAQmx.lib in the C:\Program Files x 86) \National Instruments\NI - folder DAQ\DAQmx ANSI C Dev\ that was automatically created for me when I installed LabVIEW on another computer in the lab m a few years ago.
Please let me know if I missed something. In addition, if there is a code example for a simple task like this, it will be extremely useful.
Moreover, the computer on which I am working on a Windows 7 and 9.3 DAQmx installed.
Thank you!
Fuh
-
measurement of input frequency TTL with sheet metal entered on a device USB 6363
Hi all
Is there a simple LabView vi to measure the frequency of entry TTL cable for the entrance/s, four counters available on a device USB 6363? I have LabView 2014 FDS installed. I guess using 2 4 meters would be better than 1 for 32-bit resolution, correct?
Thank you
John
Hi jac2015,
There is an example of a measure of frequency located in LabVIEW help-> find examples-> material-> DAQmx entry and exit-> entrance of counter-> meter - reading pulse width and frequency (continuous) .vi
Take a look at it and see if that helps. There is also a very useful white paper on considerations to make when measuring frequency, you can find here:
«Measures of frequency: practical Guide»
http://www.NI.com/Tutorial/7111/en/
The main considerations is how often should the signal you want to measure?
I hope this helps!
-
Trying to simulate the device USB-6366 (without success)
I read through the tutorials DAQmx and MAX about the simulation of the device, but I can't yet find a way to effectively simulate the acquisition and generation of a signal using a device USB-OR-6366.
I am a (given at the entrance of this VI) signal using DAQmx Write and then use DAQmx Read to read the signal captured from the internal memory of the card (which has a buffer of 32 MS). To do this, I created a task with DAQmx I feed in the writing block.
I know that the approach is most likely wrong, but I can't understand not just how to do this in a simple way and documentation of NOR is anything but simple. All I want is to
(a) test using 2 digital inputs to capture this signal by the device and then read what she has gained from its internal buffer
(b) send the same signal to 2 digital outputs the signal output again.
See you soon
Yes! the simulation is designed to allow you to write a program and check that it works theoretically even if you do not have the material physically available. It has no interface programming to influence on the what the reading functions will return simulated data. And write the function has no notable effect anywhere, working as a receiver of data in nirvana. It is always useful because you can test software without getting all kinds of errors on the non existing hardware access attempt, but it has its limits, of course. However, a programming interface for manipulating that which and how the data are simulated, while it would be a very interesting feature, is almost certainly to complicated not only to implement but also to use.
-
any USB device USB not Republic United Nations notes senza
Without some special USB device USB no Republic - Cosa fare UN notes? Grazie leopoldo Rogante
Hello
This is an English language Forum.
Please go to
http://answers.Microsoft.com/en-us
to select your language from this link English
Don
Questo e UN forum in lingua inglese.
If get di andare
http://answers.Microsoft.com/en-us
by rates the lingua da questo link English
-
Cannot start device USB (code.10) error
Original title: device usb ayre
Cannot start this device (code 10)
Hello
1. what operating system is installed on your computer?
2. don't you make changes to the computer until the problem occurred?
I suggest you try the steps from the link below and check if it helps.
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers: http://support.microsoft.com/kb/943104
Hope this information is useful.
-
Device usb unknown device universal bus controladora
MI pc no reconoce disposivo unknown device usb probe instalarlo y el sistema me da error 43, who actualizarlo, there informed me that esta actualizado, pero el boring self error, aunquelo desisnstale y lo vuelva a instalar alguna ayuda util, agradeceria
Thanks for posting on the Microsoft Answers forums. Unfortunately, this particular forum is only for the English language support. You can navigate to the top of any page of the Microsoft Answers forum and select your language from the drop-down menu next to your user name for the appropriate forums post in.
Follow the link provided for the Spanish Microsoft Answers forums.
-
Meaning of the States LED tricolor on device USB-232
It's more curiosity, rather than a problem. I noticed that the devices USB-232/4 most recently bought that we have received seem to now have the status of Panel before LED that show * 3 * States (4 If you include "LED off"!) - yellow, green and Red now.
I have not found anything whether in literature online to describe something as mundane as what led. I always assumed that yellow and green are the indicators of mark/space. Sometimes now they light up briefly in red, but I have not found to correlate to any abnormal operation.
What is happening with this?
Dave
Hi David,
I found the following page in help OR Serial.
I hope that answers your question!
Thank you
Scott M.
-
Get the device USB-5133 by program number
I build systems integrated with many USB devices USB.
All the regular USB DAQ device number can be detected programmatically.
My USB-5133 (digitizer high speed) is not detected by program, by a feature in Labview.
I need this tool to communicate with my systems without manually selecting device number before running my application.
Hi Harold,.
Thanks for posting your question. Please check the following knowledge base
Best regards
Faris
-
Device USB-8451 reference and attached device
I have 2 test systems PC using NI USB-8451 I2C communication.
A reference device... 33 b... and the other a... 33D..., so I can't use the default fixed values.
Also, I may need to run an exe have respected for others to use.
Questions:
1. it is not VISA. No VISA opening or closing.
2. nothing in the compare pallete validates this reference of the device.
3. no USB device attached validation (Are You There).
Up to now
1. a successful simple i/o operation can check "Are You There". I chose Dig I/O read a bit.
2. #1 above also validates the reference of the device.
Is there a smoother, faster way to do this? Windows operating system does not record stuff USB etc... ?
TODO:
Get the device USB-8451 reference in MAX.
This link may be the solution, I'll know tomorrow. I was expecting a VISA VI to be useful.
Jeff
This seems good.
Thank you
-
Wonder if someone can point me in the direction of a pilot to work under XP with the above usb to rs232
ID of device USB\VID_1A86 & PID_7523\5 & BD40FB & 0 & 1 Please?
Where did you finally find the driver? I need the same.
Hi pardallas,
Driver is from CH341SER.zip.
A download site is at http://www.winchiphead.com/download/CH341/CH341SER.ZIP
If this does not work, try a Google search for "CH341SER.zip."
This driver works fine for me on several different machines under XP.
Good luck
Bob
-
Bought the iPhone 3 g (not 4) trying to run the material but get the following error: Apple Mobile Device USB Driver no has not passed Windows Logo testing to verify compatibility with Windows XP continues the installation of this software may impair or destabilize the functioning of your system.
Windows XP Service Pack 3 is running.
I ran the 'Fix - It' 925196 solution, but the problem could not be solved. What is a malware problem?
Hi deanie3,
We will check if the following is useful.
Method 1: Run the next Fixit and check the issue.
Hardware devices do not work or are not detected in Windows
Method 2: Follow the steps in the below article mentioned to see if it helps.
-
Said device USB to serial port Manager works, but it is not
Original title: PL2303 USB to Serial No. GB
My laptop is running Windows 7. I loaded the drivers PL2303. The Manager of said devices usb-serial comm port works. Set at 9600 baud, 8 No 1 order no flow.
The GPS is a Garmin etrex Euro software version 2.06. GPS version model 156 206.
I communicate successfully with the GPS unit via an DB9pin port at the back of my office. 9600 8 No 1 Garmin format.
When I added the USB cable series to communicate via a usb port the "EasyGPS'program cannot read the GPS.I down loaded the PL2303 drivers for my desktop (XP) and the same problem occurs.
I get the message ' device working properly "for both laptop and desktop."
There is however no communication to the GPS.
I tried again via the DB9pin port and communication are OK.Any Suggestions
Thanks, JimHello
I suggest you to join easygps helpdesk on this issue.
www.EasyGPS.com/support.asp -
I am trying to determine if it is safe to use my Dell place Pro 11 (7130) - power to charge other devices via micro USB 5v of power.
That is, phones, tablets, Bluetooth devices (keyboards/mice/headsets).
I am trying to determine if it is safe to use and avoid carrying more then once Charger Micro USB.
Said the label on the place of meetings 11 Pro Dell 24W AC adapter charger
Reference output Dell: 19.5V OR 5V 2A 1.2.
HA24NM130 / DPN: KTCCJ
CN-0KTCCJ-75661
3CP - 0C 11 - A00
DP/N 0KTCCJI understand that some devices may not charge, I want to make sure that the voltage is 5V for devices usb and not 19.5V, since there 'or' on the label.
I tried it on a tablet of 5V and it seemed to load correctly: nothing caught fire. Which is in any case an authoritative answer.
-
Microsoft Notebook Receiver v2.0 device without is reconoce device USB error 43
Conecto el device em Cuando sale the Quebec notice no reconoce el device USB error 43.la which are el problema? Tal vez me falta mas reciente driver? Is windows 7 through Windows Update has he actualizado y nada. Help
Juan Carlos,
The main problem that're deberias usar los foros en Español.
http://answers.Microsoft.com/es-ES/Windows/Forum
Solo Este're para habla inglesa.
:)
The main problem is that you should use the Spanish forums.
It is only for English language issues.
Carlos
Maybe you are looking for
-
I color shade can a FCP 7 project in first?
I just finished a project FCP 7 and need it to be color rating. The guy I had to hire has FCP X and first. Is there a way for him to the proposed establishment of rank and then convert a FCP 7 file without loss of quality?
-
I have a question about the use of a headset blue tooth to the audio stream books on an iphone 5 c
I just bought a generic blue tooth headset to listen to audio books while walking. I was able to pair the bluetooth with the iphone, however, I am unable to stream the audio book. Is there a way to do this? Thank you.
-
El Capitan and CS4 Photoshop / Illustrator CS4 / Excel 2008
I held off upgrading to El Capitan and currently still use Yosemite on a MBPro. Anyone using El Capitan on MBPro with: Photoshop CS4 Illustrator CS4 Excel 2008 These are my main apps that I'm worried about compatibility with upgrade. I don't want to
-
All of a sudden I lost my internet connection to the access point and have been unable to rebuild. I use a WRT300-N router connected to a cable modem and my main desktop computer. On the wireless network access point is a WMP300N installed Win XP HP
-
STUCK IN: Configuration of Windows update failure. Restoration of the changes.
Hello I get very frustrated by that. I restarted my computer and updates began to install automatically. However, he stopped and then I got the message "failure Configuring Windows Updates. Restoration of the changes. Do not turn off your computer. I