Microsoft Notebook Receiver v2.0 device without is reconoce device USB error 43

Similar Questions

• Device USB error: USB device not recognized

  For a week to 10 days I could not connect my USB drive to the USB port. Also my keyboard and mouse stopped working because I was using a USB hub. It must have been a few Windows Vista update recently which caused this problem with USB devices. It does not recognize the USB devices. I can use the USB device on my laptop mini where I have Windows 7.

  Microsoft is going to solve the problem in Windows Vista. There should be no reason that we cannot use USB devices and before 10 days ago, it was not a problem.

  Thank you for your help.

  Hi NRuss,

  1. have you checked if the devices are getting detected in Device Manager?

  Step 1: Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Step 2: Uninstall all USB device manager entries

  a. Click Start and typedevmgmt.msc and then click OK. Device Manager opens.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat step 4 for each USB controller is listed under Bus USB controllers.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  f. check the USB device to see if it works

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I reset password on notebook receiver Microsoft 1051 v2.0

  I have a notebook receiver Microsoft 1051 P/N X 817409 v2.0. 001 OO159 PID. 600 5076244. 00836. I was hospitalized and not used the camera for over 5 months and I can not remember the password I used to protect data. Is there a way I can regain access to the data?

  [Moved from Internet Explorer - IE10, Windows 7]

  Hello

  I suggest to contact Microsoft Hardware Support for assistance on this issue.

  http://www.Microsoft.com/hardware/en-us/support/contact-us

• iTunes could not connect to the iPhone "iPhone", because an invalid response was received from the device.

  So I am a new iphone 7. I had a 6 before that. Everything was fine until the day where I got the 7, I decided to try a manual on itunes for my 6 backup so that I could put this on the new phone. I use now icloud backup but before that he always did on my computer. Its itunes version 12.2.2.25 as it is the most recent, that I can run with 10.7.5 which is the newest my mac pro can work without hacking it. Again, never had a problem before it save and use it to transfer music. Anyway, I received the message "iTunes could not connect to the iPhone"iPhone"because an invalid response was received from the device." I tried 3 different usb cords. I tried both ports to the front of the computer and all 3 in the back. Abandoned and did a backup icloud. Installed on the new phone. Everything transferred except my music library which is real download of my CD via itunes. If something was wrong on the iphone 6, surely the new phone that starts with a clean slate will be very well... wrong.  Same message. Leaves through ports, cables, etc. Is it just a simple matter of ios 10 now works with my version of itunes?

  A new phone will be iOS10.  iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. OSX 10.9 and 10.10 are no longer available. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

• Trying to simulate the device USB-6366 (without success)

  I read through the tutorials DAQmx and MAX about the simulation of the device, but I can't yet find a way to effectively simulate the acquisition and generation of a signal using a device USB-OR-6366.

  I am a (given at the entrance of this VI) signal using DAQmx Write and then use DAQmx Read to read the signal captured from the internal memory of the card (which has a buffer of 32 MS). To do this, I created a task with DAQmx I feed in the writing block.

  I know that the approach is most likely wrong, but I can't understand not just how to do this in a simple way and documentation of NOR is anything but simple. All I want is to

  (a) test using 2 digital inputs to capture this signal by the device and then read what she has gained from its internal buffer

  (b) send the same signal to 2 digital outputs the signal output again.

  See you soon

  Yes! the simulation is designed to allow you to write a program and check that it works theoretically even if you do not have the material physically available. It has no interface programming to influence on the what the reading functions will return simulated data. And write the function has no notable effect anywhere, working as a receiver of data in nirvana. It is always useful because you can test software without getting all kinds of errors on the non existing hardware access attempt, but it has its limits, of course. However, a programming interface for manipulating that which and how the data are simulated, while it would be a very interesting feature, is almost certainly to complicated not only to implement but also to use.

• Why Outlook in Windows 7 keep ask my network password every time I open the program and repeatedly asking the password. I can receive and send mail without problems

  Why Outlook in Windows 7 keep ask my network password every time I open the program and repeatedly asking the password. I can receive and send mail without problems

  See this for help...

  http://support.Microsoft.com/default.aspx/KB/290684 MS - MVP Windows Desktop Experience, "when everything has failed, read the operating instructions.

• is itunes error message cannot connect to my iphone because of an invalid response was received from the device

  get error message that IOS 10 unable to connect to my iphone iTunes 6 because of an invalid response was received from the device

  Make sure you are using iTunes 12.5.1 or later, as it is required to communicate to iOS 10.

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• IPhone will not connect to iTunes - "invalid response received from the device."

  After years of work very well, I went to put some new music on my phone and all of a sudden got this message "iTunes could not connect to the iPhone 'IPhone of David Platts' because an invalid response was received from the device."?

  I've tried different USB ports, different cables (some Apple official, some after market) and several reboots, but nothing works.

  I'm 10.7.5 OSX and IOS 10 phone you.

  Thanks for the help.

  You have a problem.

  It is good that you have told us you're OS x 10.7.5 (current is MacOS 10.12), because it is your problem.

  iOS 10 requires iTunes 12.5.1 or later to communicate.  iTunes 12.5.1 requres OS X 10.9.5 or later version.

  It's (time to upgrade the operating system of your Mac spent).

  macOS - official Apple Support

• iTunes could not connect to the iPhone, because an invalid response was received from the device.

  Just bought an iPhone 7 today and received the error message "iTunes could not connect to the iPhone because an invalid response was received from the device." Don't know what that means, and I have never had this problem with one of my previous iPhones. Thank you.

  You run iTunes 7.5.1? iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

• Invalid response was received from the device

  Now that I've updated my iOS 10 6plus my phone will not connect to my macbook pro. I get an error message stated "iTunes only could not connect to iPhone because an invalid response was received from the device. I removed the password and fingerprints, phone rebooted, macbook restarted and still does not.

  Hi kcampagna8,

  Thank you for using communities Support from Apple. We are sorry you are experiencing this problem with your iPhone. If you get an error with "an invalid response" message when you try to connect to iTunes, you can find the troubleshooting steps in the following article useful:
  
  

  Check your USB connections

  If you see the error 4005, 4013, 4014, learn what to door. If you see one of the errors below, you might have a USB connection problem:

  • 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650
  • 2000, 2001, 2002, 2005, 2006, 2009
  • An error message that includes, "an invalid response.

  Follow these steps to see if the problem is with your USB cable, a USB port or computer. Try again after each step:

  1. Use the USB cable supplied with your device. If you do not, try a different cable USB Apple.
  2. Switch to a different USB port on your computer. Do not connect on your keyboard.
  3. Plug it into another computer.
  4. If you still see the error, you can check for any other problem USB, with the third-party security softwareand the problems with hardware.

  If the problem persists, contact The Apple support.

  Get help with iOS update or restore errors - Apple Support

  Concerning

• -What it means and how to fix it? iTunes could not connect to the iPhone from the iPhone Simon Young, because an invalid response was received from the device.

  iTunes could not connect to the iPhone "IPhone by Simon Young", because an invalid response was received from the device.

  You have upgraded to iTunes 12.5.1? iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

• Microsoft Office Starter take-out Device Manager

  Greetings, Ya'll!

  I had a few problems with this computer & it's one of several questions.

  My Microsoft Office Starter has stopped working, & the Microsoft forums say it is a matter of HP. Huh?

  I went through the procedure to uninstall Office Starter, & now that I'm going to re - install, rather than see a window asking me to purchase the update, etc..  with the button 'use' for the starter, I literally have to open, which takes me to avantureux window where are listed in the Microsoft Office 2010 tools, & startup of Microsoft Excel. During the 'open' '2010' it extends to 4 topics with "Microsoft Office Starter To - Go Device Manager" being one of them. Others refer to the "media library", "Upload center", & "picture manager.

  I am wary of this first 'Microsoft Office Starter To - Go Device Manager"because of the many other problems that I have with HP Support Assistant.

  In order to reactivate "Office Starter" I am opening this 'Device Manager to take away"to reactivate"Office Starter? And if so,..., why the procedure from HP support does not include instructions of this 'law' in sound?

  Deeply, I'd appreciate any help Knowledgable Tya you could give me.

  Hello:

  I have used this method successfully reinstall Office Starter 2010.

  I zipped and attached the file to download Office Starter (under attachments below), you can unzip and run.

  You must be connected to the internet so that it works, that the contacts of the MS Office Starter 2010 download the server files.

  He reloaded everything for me very well (and several other members of the forum also).

• Wireless Microsoft notebook optical mouse does not work with g42 - 410 us laptop

  Wireless Microsoft notebook optical mouse does not work with g42 - 410 us laptop

  Hi Mary,

  Did you install all the necessary drivers, firmware and/or software Intellisoft of the mouse and then restart?

  You have good batteries in the mouse?

  Verify that the mouse is compatible with working computer and your operating system?

  Have you checked the mouse icon in the control panel (after all of the above) to a setting to activate?

  Contact the vendor of your computer and see if you need to update something else.  When I installed my wireless mouse, it wouldn't work until I updated the touchpad, the firmware drivers and.

  Good luck!

  Kosh

• I recently took a class of Microsoft and received the "Welcome" e-mail, but could not connect with the supplied credentials.

  I recently took a class of Microsoft and received the "Welcome" e-mail, but could not connect with the supplied credentials (example below):

  Your MC ID: xxxxxxx

  Your temporary access code: 18995EBE-BDAF-4883-8F95-64D18D261848

  I created a new account with the e-mail MC ID has been sent and it was not recognized.  I would like to merge (link) the news and be able to get a fresh copy of my cert.  Thank you.

  Hello

  I suggest you contact Microsoft Learning support team to improve assistance:

  http://www.Microsoft.com/learning/en/us/help/assisted-support.aspx

• Dear Microsoft, I received the following message, KB2478663 KB2518870 will not install why they no can be installed? I have Windows XP

  Dear Microsoft, I received the following message, why they can be installed?  I have Windows XP
   
  The following updates have not been installed.
  Update of security for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2518870)
  Update of security for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2478663)
   
  Thank you

  Hi BuddyWoods,

  ·         What is the exact error message?

  ·         Have you made changes on the computer before this problem?

  Before windows updates, follow these methods.

  Method 1: Put the computer in a clean boot state before proceed with the installation of update to see if there are any software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  Method 2: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Reset the Windows Update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058