of standby option not on shutdown

Similar Questions

• How to enable the continuation of the Standby Option for a USB mouse: I do not see the "allow this device to wake the system from standby mode' check box__

  I use Windows XP Home Edition and I am fully up to date with the latest version of the software.

  I would like to activate my mouse USB power out "sleep mode" on my computer.  I found the help topic that describes how to do this: http://support.microsoft.com/kb/280108 how to enable the continuation of the Standby Option for a USB mouse

  However, when I follow these steps, I don't see the 'allow this device to wake the system from standby mode ' check box on any of the windows as described in the documentation for Ms.
  I use a Microsoft Comfort Optical Mouse 3000 (IntelliPoint) USB

  Any help would be greatly appreciated!

  This gives a test:

  1. click on START
  2. click on 'run '.
  3 type "notepad" (without the quotes) and press enter
  4. copy and paste this into Notepad:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\usb]
  "USBBIOSHACKS" = DWORD: 00000000
  "USBBIOSx" = DWORD: 00000000

  5. click on file > save as
  6. change the dropdown to "all files".
  7 type usb.reg as the file name and save the file somewhere easy to access
  8 go find the file and double click it. Confirm that you want to add it to the registry
  9 restart the computer and see if you can wake the system from standby mode

  For reference, take a look at this:
  http://www.dslreports.com/Forum/r19635912-missing-power-management-tab

  Let us know,

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Game are performed very slowly and without standby option

  I have HP nr 15-R007TX-G8D31PA #ACJ

  I installed win pro 8.1 on my laptop and installed NVIDIA graphics card also always there is no standby option (hibernating) available and when I play games it run very slowly and graphics are not as good

  Please help me with this problem

  @Vashu23

  These pages can help with your sleep/hibernation problems, the first is HP and the second is to WindowsEightForums:

  Sleep and Hibernate in Windows 8, issues troubleshooting

  Power Menu Options - Add or remove a standby or Hibernate in Windows 8

  Also, here are a few tweaks that you can watch in windows 8, which can be useful for performance.

  Set the performance of the slow system (Windows 8)

  Also you can watch latency spikes. Essentially, it is an application, driver, or a combination that will push the CPU to its limits and so your system will have spikes where the transformer is overloaded. Requests will be have lag or stop responding, audio or video will pause or break up.
  
  I found the following page on Sysnative that addresses this problem very well, with lots of graphics and links to Microsoft support pages. It will help you to isolate the cause.
  How to diagnose and solve the problems of high latency DPC with WPA (Windows Vista/7/8)
  
  If you need a tool to check latency, you can get one from TheSycon here page:
  DPC latency Checker

• Firefox 24 - options not remembered from one session to the other

  When I've upgraded to Firefox 24, all the v23 option settings restore default values. I put them back the way I had them before, but after restarting the browser, all default as before. I use NoScript, and any change to its rules is also lost when I restart the browser. I rebooted several times. with no system restarts and the results are always the same.

  History and passwords seem to be updated and kept in sessions. The problem is with the data to configure Firefox and NoScript.

  I am running XP SP3 with 2 user accounts. One is an administrator account that I use only for the maintenance of the system, and the other is a limited account where I do most of my work. The admin account, where I installed v24, remembers changes in configuration between sessions; the problem is with the limited account, which is the one that I care.

  I checked the profile in use for the limited account, and files have updated definitives in application Data Mozilla \limited user\application folders, so it doesn't look like a permission problem. This folder contains now 86 prefs-files numbered out of all 3 have maintenance date today, but the file prefs.js watch was yesterday, before I improved versions.

  There are also 25 sessionstore-files numbered, that have all of the old dates, but the sessionstore.js and sessionstore.bak files show as recent.

  Any suggestions?

  After posting the question, I found this thread in the support forum - https://support.mozilla.org/en-US/kb/how-to-fix-preferences-wont-save?esab=a & s = firefox + + 24- + options + not + remembered & r = 1 & as=s#w_reset-firefox-to-fix-the-problem.

  Following the instructions, it seems that the file for the limited account has been altered in the upgrade to the Version 24. I deleted, and the problem is solved.

• ASA 5520's active / standby, do not sync AnyConnect Profles

  I'm working on two ASA 5520 configuration in a configuration active / standby.  I have almost all the same between the two units for AnyConnect work waiting for both of the following:

  AnyConnect Client profiles

  AnyConnect Client software

  If I download the software manually to the standby unit I get warning against them are not synchronized, and on the active unit if I do a 'writing' standby does not copy the profile or the software.  Anyone has any ideas on this?

  Thank you

  Dan

  Hello

  Bug CSCsr31403

  When you configure the ASA in a failover pair, you must manually copy the AnyConnect and CSD images for the primary and the secondary ASA.   You must also do the same for the Anyconnect profile file if you use it.

  Either force the ASA shall become active and copy the files to the new ASA assets using ASDM or copy files directly from the console ASA ensures using tftp or ftp.

  Kind regards

  Note the useful messages

  Julio

• I would change a few pdf, I created. I downloaded (acrobatproDC_00000000000000000000000409.exe) and then did the installation. but when I opened one of my docs, the Edit option not there. What have I done wrong

  I would change a few pdf, I created. I downloaded (acrobatproDC_00000000000000000000000409.exe) and then did the installation. but when I opened one of my docs, the Edit option not there. What have I done wrong

  Uninstall what you have downloaded.

  If windows, clean it by Download Adobe Reader and Acrobat tool - Adobe Labs

  Reinstall the correct version for which you are authorized to use another browser.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 pro extended exe,7z extended pro 9 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.6.1. 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Export the jPeg option not available InDesign CC 2014.

  Export the jPeg option not available InDesign CC 2014. Extension manager says he's here and installed but no show! any ideas?

  Yep, re-installed in design CC 2014, after it has worked well.

• The printer options not available when printing from Lightroom

  Hi all

  I have a problem with the interface of Lightroom 2 (version 2.4, executed in 64-bit mode on my Intel Apple Mac with Mac OS X 10.5.8 (Leopard)) to my printer driver, an Epson Stylus Photo R800.  I can see looking through the forum that there has been a lot of problems with printers, but none as far as I can see that seem to cover my particular problem.

  In the Lightroom print module, after setting everything up, selecting the correct ICC profile for the printer/paper etc. I click on the button "print...". "at the bottom of the right panel to launch the dialogue of the printer.  My problem is that the essential options, I need access to this printer dialogue, namely 'Print setting' (to determine the media type, and print quality) and "Color management", (to disable the printer color management)-are disabled.  To be exact, these options have a line through them, as if they were crossed.  "Print option" and "Setting the Extension" are similarly disabled, while "Layout", "Paper handling", "Cover Page" and Planner "are available.  (See JPEG screenshot attached.)

  If I try to select one of the options not available such as 'Color management' I see the following on the screen error message:

  "The bundle 'Color management' couldn't be responsible because it does not contain a version for the current architecture.  Contact the creator of all here for the most recent version: Color Management 3.09, SEIKO EPSON CORPORATION 2001-Copyright (C) 2005. All rights reserved. »

  The strange thing is, if I print from Photoshop CS3, there is not this problem: "Print setting" and "Color management" are not disabled, and I can make the adjustments I want.

  Coming off the printer prints color are way off if I print from Lightroom, so that from Photoshop, they are great - I guess because of this problem (I can not turn off printer in Lightroom color management, so that I can in Photoshop).

  I guess that this is a problem in the interface between Lightroom 2 and my printer driver, but I find it strange that I don't have the same problem in Photoshop.

  I have re-installed the latest printer driver downloaded from the website of Epson many times, following the instructions to the letter to Epson to remove the old drivers of my machine, to nothing does not.

  I really want to print from Lightroom instead of Photoshop, I like the simplicity of the Lightroom print module.  Can anyone throw any light on this?  Any help or ideas gratefully received!

  Thank you

  Ian

  Just save a driver of printer/preset in any 32-bit application. Then apply this preset when you print from LR runs as a 64-bit application. It is only the interface that is the problem. It should show very well, at least it does with Canon printers.

• Standby does not work as specified in the menu Power Options

  XP Home Edition, IBM computer.  Ignores specified times in Options power to go in standby mode.  I can choose the eve of the closing screen.   Which have been occurring for several weeks.  No new software or hardware added.   Installed MicroSoft Security Essentials and run frequently, soapparently not a malware issue.

  Sometimes the system will not remain in standby mode when put closure... screen reboot seems to fix this; don't know if it is related to the question above.

  "willm1961" wrote in message News: db8b406e-ef18-418 c-bc17-29b4b7a9e4f1...

  XP Home Edition, IBM computer.  Ignores specified times in Options power to go in standby mode.  I can choose the eve of the closing screen.   Which have been occurring for several weeks.  No new software or hardware added.   Installed MicroSoft Security Essentials and run frequently, soapparently not a malware issue.

  Sometimes the system will not remain in standby mode when put closure... screen reboot seems to fix this; don't know if it is related to the question above.

  Check background processes - which can prevent the machine from sleep mode.
  Check the scheduled tasks - that can bring the computer from sleep mode
  Make sure that the cat is not walking on the keyboard to put the machine out of sleep. = check the BIOS settings to make sure that other devices are not out the machine in standby (modem/NIC/mouse, etc)
   
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• Standby option does not work on windows 7

  Windows 7 - computer system used to sleep; light switch would turn yellow. The hard disk starts when the mouse is moved.

  First of all, I don't have hybrid sleep in option mode. Secondly, when it goes into hibernation after 20 minutes it stops and the power button should be used to turn it on. I searched the forum but found no solution.

  Windows 7 - computer system used to sleep; light switch would turn yellow. The hard disk starts when the mouse is moved.

  First of all, I don't have hybrid sleep in option mode. Secondly, when it goes into hibernation after 20 minutes it stops and the power button should be used to turn it on. I searched the forum but found no solution.

  The description is correct. Mode 'sleep' needs the power button to be pressed in some computers and some PC, mouse activity takes up the PC.
  Hibernation saves your session as such (like a snapshot) and turns off the PC. Here, you must press the power button to resume.
  Note: If you enable hybrid sleep, you may need to press the power button to resume. Also, after hibernation, you can turn the power off and turn it on when necessary. The session will not be disturbed. Whereas, in sleep, you are not supposed to cut off the power (that too hybrid sleep is turned off).
  If you feel that the answer is not related to your question, good answer here, with more description on the issue.

• Hibernate and standby options does not not on Satellite P200D

  Hi, I have a P200D with XP (he had originally Vista but I took the decision to use the reliable XP instead of Vista to baby)
  Anyone know how to enable hibernation options and the day before? They went gray and I really need these options.
  Thank you

  Hello

  The same notebook here! Can you please tell me what display driver you have installed? I tried to install Windows XP Home edition on mine a few months ago, but I wasn't able to find the right display driver.
  As far as I know after the right display driver installation the sleep option should be available.

• Satellite C75 - A - auto sleep (standby) does not work

  Hello

  My Toshiba SATELLITE C75 - A will not automatically in standby mode (standby) after some time of inactivity.
  Eve works well when I trigger it manually with the start menu and when I do not use the mouse or keyboard for a while, the screen turns off. But neither sleep nor put into hibernation is turned on after the interval set in the energy saving plan.

  When I run
  powercfg with fluo compact
  on the console I get

  "PCI Express Active State Power Management (ASPM) has been disabled due to incompatibility with the hardware on this computer."

  My BIOS is updated.
  I would be really grateful for any advice.

  Hello

  Have you tried to activate the Hibernate mode and standby manually by using the powercfg command?

  Here is a list of possible options regarding the powercfg command:
  [Powercfg command-line options | http://technet.microsoft.com/en-gb/library/cc748940]

  For example with the command * powercfg-h on * turns the hibernation feature on or off.
  You can use also returns a list of devices that support hibernation or sleep

  By the way: what system are you using?

  In addition, you can try to activate or disable the PCIe Link State Power Management in Windows

  Go to control panel-> Power Options-> advanced power plan settings
  Here, scroll down and expand PCI Express and Link State Power Management.

  Currently setting (without battery) or on battery and sector, open the drop-down menu, select Off or ON and click OK.
  If you select No, there is no energy savings, and current runs regardless of which state that the laptop is in. (depending on whether your laptop is plugged or not).
  On battery: Off = PCI Express even will communicate using the power of the battery.
  Plugged in: Off = PCI Express communicates when it is connected as well.

• Standby does not work on satellite

  Hello
  I think I have the same problem that TSC, the function of sleep is not enabled on my laptop. When I click, start, stop - the standby key is "grey", IE. I can't click on it, I can only click on stop or restart.
  In the toshiba power saver options, the wait cursor is also "grey" in each profile, so I can't activate it.

  «In normal power saving options, clicking on the Advanced tab is not raise an option ' ' activate Standby ".» All that there is the options of what to get I hit the power button or close the lid. On closing the cover option (which is used to put my laptop on standby) it only has now an option, "do nothing". It is not yet all that exists.

  Please please can someone help?
  My laptop is overheating and the fan made such a noise if I just leave it on, and I'm tired of having to launch and shut down five times a day.

  Thanks in advance!
  Jenna

  Hello Jenna

  I assume that your laptop is not preinstalled with recovery media just with your own installation of the OS. Am I wrong?

  As far as I know after sleep button graphics driver installation must be enabled. Hibernation (support) option must be enabled manually, but waiting has to be there.

  I put t know which satellite you have, but of course, the device must be cleaned properly. Remove the unit from the dust will be able to take a breath and cooling fan will not run constantly.

• computer will be management option not Eve if power > 1 minute

  If the option to set power management standby after 1 minute of inactivity, it works; otherwise it is not - any ideas?

  Hello

  ·        Were you able to use watch on the system before with no problems? Since when are you facing this problem?

  ·        Remember to make changes to the system?

  Method 1:

  I suggest to update display drivers as well as drivers from the chipset on the system and check if the problem is resolved. See the article mentioned below.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Method 2:

  If you have set any screensaver then, it could be that the screen saver wakes up the system after 1 minute. I suggest to disable the screensaver on the system and check if the system is able to go in standby mode. Follow the steps mentioned below.

  a. press the right-click on your mouse when your desktop is visible. A menu will appear.

  b. click 'properties '.

  c. look at the tabs under the marked blue title bar "display properties". You should be able to see one marked "screen saver". Click the screen saver tab once. You should now see a small monitor.

  d. find the drop down next to the marked buttons 'Settings' and 'Preview '. Click on the arrow down on the right side of the menu drop down.

  e. look the list of available screensavers. The first menu is marked '(none) '. Click on this title. Once you have clicked on the title, the "Apply" button will become operational.

  f. click apply. Close the display properties window and the Control Panel window. You have now disabled successfully your screen saver.

  I suggest you follow the steps mentioned in the article below.

  How to solve the problems of hibernation and standby in Windows XP

  http://support.Microsoft.com/kb/907477

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Manuel Standby Database not in harmony with the missing archivelogs

  Hello
  
  Operating system: Solaris
  DB: Oracle 11.2.0.1 EA
  Do not use RAC or ASM
  
  I have a Production database which is in archivelog mode and standby server DR.
  The two servers (Prod, standby) have the same structure and exact db name/version.
  
  We manually scp archive logs and recover them to a database of manual standby via the SQL Scripts "cron". (I.e. the value of automatic recovery on; restore database Eve ;))
  Recently, we got out of sync with our log files and were not applying on the eve. As part of the maintenance of the Prod, these log files have been removed and are no longer available.
  I tried several ways to 'rebuild' our database awaiting. I tried to prod Shutdown, backup all files db and scp sleep them, recreate standby controlfile and startup mount and recover the.
  Whenever I try to apply a new journal archive via recover Eve, here are the errors:
  
  ORA-00279: change 211077622 September at 27/01/2012 12:18:42 necessary to screw 1
  ORA-00289: suggestion: /oradump/arch/PROD/PROD_arch_1_69486_736618850.arc
  ORA-00280: change 211077622 thread 1 is in sequence #69486
  
  
  ORA-00308: cannot open archived log ' / oradump/arch/PROD/PROD_arch_1_69486_736618850.arc'
  ORA-27037: unable to get file status
  SVR4 error: 2: no such file or directory
  Additional information: 3
  
  ORA-10879: error reported in parallel recovery slave
  ORA-01547: WARNING: RECOVER succeeded but OPEN RESETLOGS would get below error
  ORA-01152: 1 no file has been restored from a sufficiently old backup
  ORA-01110: data file 1: ' / oradevices/PROD/oraPRODsystem1.dbf'
  
  When I check v$ log_history, new newspapers have not been implemented.
  I also tried the method 'Restore from incremental backup via YVERT' with the same results.
  
  Is there a way to re - create own forward and ensure that the chain of the newspaper which is now defective gets fixed or reset?
  Finally, I would get DataGuard here, but this isn't the case at the moment.
  Thanks for your suggestions.
  
  -Dav

  If you use the backup to cold to create the database pending, check whether you have followed these steps.

  1. Remove
  all the data files and the database pending controlfiles.

  2. create a new controlfile eve of production to standby by using the following command
  "change the database create controlfile as 'Location'"; "."

  3. move the controlfile back to the location of the server database of such relief as specified in the initialization parameter file.

  4. replace its appropriate place that was taken through cold backup all data files.

  5 startup nomount

  6 change the mounting base pending;

  7 restore database pending.
  CPS archives newspapers sequence which is posed by the database of the production.

  You can try these steps.