Office of devices of charms

Similar Questions

• E1505 external use adapter at the office, presents device management only

  First a little back on the ground to see why I try to get my laptop hard drive data. The initial problem was the power supply in the Dell Inspiron E1505, Dell support believes that the motherboard is damaged by the provided information. The cost of service and Council of mother too I can't replace it at this time. I bought a new power with the new connectors adapter and could not take the laptop to life.

  I tried different adapters to use to connect my drive sata hard E1505 to my desktop type EIDE. I bought the wrong type cards first because most of the information received was for EIDE to UBS adapters. I bought three different types and could not get the appropriate connection. I didn't know I had a type SATA HDD, I was looking for the pins to the back of the hard drive, which of course was never found.

  I solved the problem of the external adapter, now I find that the hard drive of the laptop does not appear in windows xp 'My Computer', so I am unable to see my files on the external hard drive. I see the drive in Device Manager, there is no drive letter, I am only able to get the help option when right click on player to leave. Any help would be appreciated

  
  

• BlackBerry Smartphones to Blackberry Manager devices to display the USB PINS

  My Blackberry Bold 9000 is not recognized by my office blackberry Device Manager.  After hours of playing around to try to solve this problem, here is what information I can provide.

  My desktop and laptop running Vista 64-bit.  I had no problem installing the Desktop Manager on my laptop and cable, updated processes, etc. all work fine.  In my view, this allows me to isolate the desktop and not the device or the cable. The Desktop Manager software is to date on both systems.

  When I try to get the Blackberry device manager to recognize my camera on my desk, in the table options of connection under connection, that COM1 is displayed, Disable stateful shown.  USB-Blackberry 9000 (Paperback) appears on the laptop.  I've hunted around these tips and google for a solution to this problem, but I have not yet found one.  Under the Windows Device Manager, "Blackberry Smartphone" is listed under USB controllers when the unit is plugged, and the drivers are updated according to the instructions on these cards.

  The functions of USB ports for the operation of the keyboard, mouse, and external storage.  I tried to connect to all six USB ports in the back and two on the front of my office, without result.  When the device is connected to my desktop computer, Windows recognises the Smartphone and SD card separately as mass storage devices - with the phone powered on or off mass storage device option.

  I have a feeling that this would be resolved if I could get the Blackberry device manager to display a USB instead of COM1 port.  Someone at - it solutions?

  Hey this is my solution... it worked perfectly for me, and oddly enough, this is a difficulty for VMWare (also the difficulty to detect USB devices)

  Try to right click on one of the USB hubs (in Device Manager) and looking at the details of the driver. If usbfilter.sys is in the list then open your registry editor and navigate to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class {36FC9E60-C465-11CF-8056-444553540000} and remove the UpperFilter, pair of usbfilter.

  I restarted after making this change, and it works fine now.  Its the first time in the month that I could plug my Curve 8900 using my USB on my PC 64-bit of Windows Vista (now Windows 7).

  KUDO to the population of VMWare for this solution.  Thank God, she also fixed for my BB Desktop Manager! WOOT WOOT!

  Here is a link where I found this solution

  http://BX.BusinessWeek.com/consumer-arbitration/view?URL=http%3A%2f%2Fcommunities.VMware.com%2Fmessa...

  Merry Christmas everyone

• My PC shows TV as one of the devices.

  Original title: my PC shows TV as one of the devices. My Samsung TV network test shows OK. When I try to put the PC as source TV shows "check signal cable" what Miss me?

  The title says it all. I tried to connect without success, so must have missed a few settings. Have not tried to remove SuperAntiSpy Ware proffesional or Windows Defender again, too wary of the virus attack. Can someone help me please I use wireless that connects with my printer and Windows phone

  Hello

  Check out the following links and check the status of the issue.

  Once the Wi - Fi connection has been established between the two devices, your TV will be shown on the device of charm or play to the charm of your computer.

  I suggest you see TV manual or contact the manufacturer for help on this issue.

  I hope this helps.

• XPS One omitting 2710 USB devices

  I've been solving this problem for several months without success. My system is a current XPS One 2710 BIOS Ver A12 with all device drivers. The system is running WIN 8.1 worm 6.3.9600 9600 build updated all Microsoft updates and patches.

  Last year, I bought two external hard drives 1 to Seagate to use as a local backup (each disc contains different files). Both are USB 3.0 with appropriate cables which I plug into the rear USB ports on the XPS. When I start the Windows machine indicates all USB devices works (printer, scanner, both drives hard ext). Anywhere from 10 minutes to 2 hours, and sometimes longer, I hear the beep of the computer and in the lower left corner, a message appears saying a USB device has failed. (Printers and other devices are not affected and continue to work). I check in device for records manager and he tells me "unknown USB device (device descriptor request Failed)" here are the details about the failure:

  Log name: Microsoft-Windows-Kernel-PnP/Configuration
  Source: Microsoft-Windows-Kernel-PnP
  Date: 09/04/2015 15:26:34
  Event ID: 411
  Task category: no
  Level: error
  Keywords:
  User: SYSTEM
  Computer: Doug-Office
  Description:
  Device USB\VID_0000 & PID_0002\5 & 1a5166b6 & 2 & 4 had a problem starting.

  Driver name: usb.inf
  The class GUID: {36fc9e60-c465-11cf-8056-444553540000}
  Service:
  Lower filters:
  Upper filters:
  Problem: 0x2B
  Status: 0x0
  The event XML:
  schemas.Microsoft.com/.../Event">
   
     
      411
      0
      2
      0
      0
      0x2000000000000000
     
      2191
     
     
      Microsoft-Windows-Kernel-PnP/Configuration
      Doug-Desktop
     
   
   
      USB\VID_0000 & PID_0002\5 & 1a5166b6 & 2 & 4
      USB.inf
      {36FC9E60-C465-11CF-8056-444553540000}
     
     
     
     
     
     
      0x2B
      0 x 0
   
  

  The machine requires a restart of the entire system to clear this error.

  USB selective suspend setting is disabled

  Any ideas would be greatly appreciated. I ran out of ways to solve this problem.

  Have you checked the power management tab for each hub USB root in Device Manager?

  If the box: "allow the computer to turn off this device...". "is checked, acheck it and click OK. Repeat for all the USB root hubs, then restart. See if that helps.

  It was reported that it is a Windows problem that can be "fixed" by editing the registry. You can google for this info and edit the registry at your own risk...

• II 9550 blackBerry smartphones trying to Re - Sync installation wants to remove 400 + items Cal in Lotus

  Only had the Storm II for 4-5 months.  I'm synchronizing the calendar and tasks with Notes v7.0.1.  Somewhere I had many, many duplicate calendar entries in the storm and not duplicated in diary Notes.  To try to resolve I went to:

  Office software > Device menu > clear data > calender - all

  you seems to have succeeded.  the calendar with the BB seems to be empty.

  Office software > Organizer > Calendar Sync > Notes go BB

  you seems to have succeeded.  Random audit shows the calendar with the BB "seems" to match the calendar in Notes (I have not checked all items + 400).

  Now changed to two-way sync Calendar.

  He wants to remove 400 + Notes Calendar items.

  Apparently, I screwed up.

  If need to be, I am able to create a copy of my Notes of DBF, leaving Desktop software deleting all entries, restore the original DBF, then Resync.  'If' that would work, and it isn't an easier solution.

  Opinion/solutions?

  Thanks in advance for your help

  ----------------------------------------------------------------------------,

  Hi wdavro,

  Welcome to the BlackBerry Support Community Forums.

  Please check that all the calendar entries are present on the device. In your device calendar options, click on each email address to find one with the number of calendar entries.

  Check Services Options by default Advanced Options on the device and make sure that the default calendar is set to the same email address.

  These articles of the KB can be useful to synchronize your calendar. http://bbry.lv/aMcGlr and http://bbry.lv/b2UjZs

• RRI and Client Mode

  Hello

  I'm reading the "Cisco VPN Config complete Guide" by Richard Deal and without a doubt it's a good book. I am confronted with a difficulty to understand something here.

  In my opinion, reverse road Injection is more useful in the Mode of Extension of LAN in Client mode, because the connections must be made from the company to the SOHO network network. And to do this, the corporate network must know the SOHO network. IPP is used in this case, install a static route inside the company and then VPN gateway redistribute it in the corporate network.

  In client mode, the reverse is true: connections are initiated from the client software or the SOHO network to the corporate network ONLY. So why do I care all to reach the SOHO network or client software from the company network? The author does not specify that.  That's what the author said:

  "The Cisco IPP provides the best approach to remote access clients. IPP is a further development of Cisco-owners for IPsec. At the end of ISAKMP/IKE Phase 1, the remote access client does the following:

  • If in client mode, the client is assigned an internal address of the gateway VPN; the VPN gateway this will add as a static route to the local routing table.  ---- > WHY?

  • If in network extension mode, the client sends the network number of the Interior of the interface of the VPN gateway using an ISAKMP/IKE Phase 1 message. "---> MAKE SENSE

  Please clarify why should I the IPP solution for the client mode. IPP for mode LAN Extension makes more sense.

  Kind regards

  AM

  Hello

  As I mentioned in the first answer,

  Consider a situation where you have a central office VPN device that IS NOT the device that crosses all traffic internal to the external network. In other words in your internal network the default route redirects traffic to another device, for example the perimeter firewall.

  Now for all traffic to flow between the 2 different networks you must naturally the routing tables on the device between the networks to have a route to each network or traffic not correctly between them.

  So consider a situation where your hardware client Mode Client connects to the central VPN device (which is not the gateway for all external traffic) which is running OSPF with all internal routers and the IPP is NOT used. The IP of PAT address used by the hardware Client Mode Client is never adverticed to the rest of the network and traffic flows incorrectly for the perimeter firewall to which the default route points to. If IPP has been activated (and other settings) internal routers could properly bringing traffic back to the PAT IP address to the VPN device rather than the perimeter firewall.

  Naturally, the situation described above applies to a LAN Extender mode also, but in this case the VPN device is naturally adverticing a whole network/subnet instead of an IP address of the host used as IP address of the PAT customer.

  If the remote Client Mode or LAN Extension Mode hardware Client connects to the central site, the central site must have a route to the remote network or the IP of PAT address for traffic to flow between the 2 end points of the network.

  If the central VPN device does not install a route to the address IP of PAT to the central network and then naturally the traffic won't be a way. Customer address IP PAT mode traffic will reach the central site, but the return to the address IP of PAT traffic will not flow properly without IPP.

  -Jouni

• Centro - calendar causes reboot, phone causes reboot cycle, contacts gone

  I had problems with my centro enter a reboot cycle in the past, but it has itself is usually spontaneously resolved eventually. This time, it's a little less:

  -switch on the phone causes restart, usually just after, it pops up a message asking if you want to copy the info from the sim card

  -from calendar to restart

  -all contacts are gone

  A soft reset (several times) did not help. Any help is appreciated!

  I was able to resolve the problem by following these steps:
  -hotsynced
  -check that all data was indeed present in palm desktop

  -hard reset device, erase all the data on it
  -hotsynced, with the office replaces device

  It is without doubt the corruption of databases on the device, although not badly enough to prevent obtaining data hotsync and erase and rewrite them on the device for correction of the problem.

• Cannot delete "Second screen" by the charm of devices; also says «nothing can be sent from the Office (for printer?»

  How to fix... have not used second screen on this new laptop, recently upgraded to Windows 8.

  Hi John,

  Thanks for posting your question in the Microsoft Community.

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would really appreciate if you could answer the following questions:

  1. what exactly is the problem you are having?

  2. What is the error message that is accurate or complete?

  3. What is the brand and model of the laptop?

  4. have you made any recent hardware or exchange of software on your computer before the show?

  Please provide us with more information on the specific question to help you to fix as soon as possible.

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Charm of devices: "Microsoft XPS Document Writer" has no effect on my RT Surface

  I got my Surface RT months and never got the "Microsoft XPS Document Writer" contained unit under the spell of devices to work.

  If I start a metro like IE or Reader or another application and print to a file .oxps, so I bring up features charm and press "Microsoft XPS Document Writer", nothing happens (other than "Microsoft XPS Document Writer" button visually depressing and not depressing).  I expect the XPS Document Writer UI to climb, but nothing ever happens.

  I can print to the XPS Document Writer desktop applications (for example Word, Notepad, office, IE, etc) on my RT Surface very well.

  I've never used three devices in the charm of devices: "send to OneNote 2013", "Microsoft XPS Document Writer" and "Xbox 360".  The first two work, but the third has never.

  Anyone know how to solve my problem?

  refer to this link:

  http://TechNet.Microsoft.com/en-us/Windows/hh859698.aspx

• Office Jet 8610: Device appearing is not in the device tab connected hp after entering the claim code (for the second time)

  I got the claim code to register my hp device connected for the second time and on both occasions, it doesn't have to be displayed in the devices tab.

  I tried a disconnection and logging into my account, but this has not solved the problem.

  I tried the two Chrome Version 39.0.2171.95 (64-bit) and Firefox 31.0 on a MacBook Pro running Mac OS 10.9

  Printer is an Office Jet 8610

  Web services are enabled and the printer is connected to the network.  I created the computer print jobs and they have successfully completed.

  * beep *?

  The problem disappeared after I checked my email address

• Microsoft Office Starter take-out Device Manager

  Greetings, Ya'll!

  I had a few problems with this computer & it's one of several questions.

  My Microsoft Office Starter has stopped working, & the Microsoft forums say it is a matter of HP. Huh?

  I went through the procedure to uninstall Office Starter, & now that I'm going to re - install, rather than see a window asking me to purchase the update, etc..  with the button 'use' for the starter, I literally have to open, which takes me to avantureux window where are listed in the Microsoft Office 2010 tools, & startup of Microsoft Excel. During the 'open' '2010' it extends to 4 topics with "Microsoft Office Starter To - Go Device Manager" being one of them. Others refer to the "media library", "Upload center", & "picture manager.

  I am wary of this first 'Microsoft Office Starter To - Go Device Manager"because of the many other problems that I have with HP Support Assistant.

  In order to reactivate "Office Starter" I am opening this 'Device Manager to take away"to reactivate"Office Starter? And if so,..., why the procedure from HP support does not include instructions of this 'law' in sound?

  Deeply, I'd appreciate any help Knowledgable Tya you could give me.

  Hello:

  I have used this method successfully reinstall Office Starter 2010.

  I zipped and attached the file to download Office Starter (under attachments below), you can unzip and run.

  You must be connected to the internet so that it works, that the contacts of the MS Office Starter 2010 download the server files.

  He reloaded everything for me very well (and several other members of the forum also).

• Palm TX - calendar office empty and now it seems that it syncs with the device.

  Hello Forum members, Palm

  I have Windows 7 and I synchronize my Palm TX for desktop 6.2.2 via bluetooth.  Two weeks ago, I loaded my calendar of office, and it was empty.  I have made several attempts to synchronize my device to the desktop computer in the hope to recover my datebook\calendar and it seems that the synchronization stops during the update of datebook\calendar.  I uninstalled and reinstalled the desktop software, I also imported the appointment file... but it is also empty.

  Any assistance will be greatly appreciated, thank you in advance :-)

  Lori

  There may be the database at the source of the problem. Click on the following link for the program called DbFixiT. This program has a trial version that you can download and install on your Palm OS device. The trial version will search the database and then to declare the corruption. You can then search records at the origin of the problem and fix them yourself or you can buy the program and do it automatically repair records.

  http://www.pimlicosoftware.com/dbfixit.htm

  To install the program, the value of all lines of "doing nothing" except quick installation or install if you use Palm desktop 6.2.

  After installing the program on your handheld, the scanner and scan also to BLOBs in the calendar.
  After you clean up the database on the handheld, set the conduit in hotsync for handheld overrides desktop and perform a hotsync.

  The best way to protect your data is to export the data in each category of Palm Desktop in a separate folder on your PC.

  Create a new folder on your PC somewhere that suits. Name it something like Palm Desktop data. Click on the link below and follow the instructions on this page for the export procedure.

  http://KB.hpwebos.com/wps/portal/KB2/common/article/28734_en.html
  Make sure you only select everything for the beach in the export window.

  With the data stored in the created folder, make a copy of this file and save it on a USB key, cd - rw or external hard drive.

  Whenever you change in Palm Desktop, export the data that has been changed in this file and save again to external media.

  With this process you can always import the data in Palm Desktop, whenever you have a problem with the data in Palm Desktop, or if your computer/hard drive/device crash.

  For reference purposes, click the following link to the support page for your device on the kb.hpwebos.com Web page.

  http://KB.hpwebos.com/wps/portal/KB/na/tungsten/TX/unlocked/home/page_en.html

  There are links on the page the user Troubleshooting Guide, how to, downloads, etc.

• MS Office 2007 Home & Student - 3 devices limited

  I got MS Office 2007 Home & Student installed on 3 PCs at home. I replaced a PC that more restarts with a new laptop.

  Does anyone know if I can install it on the new PC, as I now only 2 facilities. They will allow me?

  The EULA for Office home and student limits its use to the three machines.

  Device under license. You can install a copy of the software on devices three licensed in your household for use by people who reside there. The software is not approved for use in any commercial, for-profit or income-generating.

  For further questions to the office:

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  See you soon.

  Mick Murphy - Microsoft partner

• The office blackBerry Smartphones/Device Manager properties

  Well, first of all, have had my curve for about a month. Yet to learn... that being said, I have a problem. The night I had my Blackberry, I installed desktop manager 4.7 on my laptop and desktop. Connected my phone via USB. And immediately updates for my phone began to install, well a fatal mistake came and my phone would not work. I had to re - install the OS on my phone. I did it and everything works great. My question is on the Office Manager, in respect of assistance, properties of the device, I have an error message, "a communication error occurred during the attempt to establish a connection to the device. Please reconnect the device to open a new connection. This happens on both computers, and no matter what USB port I use. My husband has exactly the same phone, do not have the updates on his phone and all is well.

  I have the BB Curve 8330 (Verizon)

  Desktop Manager version: 4.7.0.32

  Software phone is 4.5.0.77

  Any suggestions would be greatly appreciated. Thanks in advance.

  Thank you very much for your help, what has worked.