Office of distance automatically Logs the times randomly.

I distance desktop into a machine to work windows XP.  Windows XP SP3, all updates.  I have been using this box for 5 years with zero problems.  From three days ago, I get disconnected at random intervals of 2 minutes to several hours.  Whenever I have reconnect, the session has been noted, not disconnected, the session has been terminated.  This can happen when the connection is actively used, or when the connection is idle.  I'm puzzled because it is completely new behavior.  I was wondering if anyone had thoughts?

Thank you

Advertisement

Hi TomasError,

  • Did you the latest changes on the computer?

Method 1

I suggest that you perform the restoration of the system on the computer if you have made a recent change on the computer.

How to restore Windows XP to a previous state

http://support.Microsoft.com/kb/306084

Method 2

It is possible that some third-party programs installed on the computer is causing the problem.

I suggest that you place the two computers in the State of clean boot and check if it helps.

To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

See the link below to learn more about how to clean boot.

How to configure Windows XP to start in a "clean boot" State

http://support.Microsoft.com/kb/310353

Reset the computer to start as usual

When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

(a) click Start, type msconfig in the search box and press ENTER.

(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

(c) under the general tab, click the Normal startup option, and then click OK.

(d) when you are prompted to restart the computer, click on restart.

Tags: Windows

Similar Questions

  • change language - if I change the language in an Office document, it automatically changes the language in firefox.

    Hello
    in my old computer I have used to have the language settings in Office and independent Firefox (write in English in an and the Hebrew in the other, no need to spend). I recently changed computers with office 2010 and Windows 8. Now if I write one language at the office, it changes automatically in internet research as well.
    Could you please help me with this very annoying problem?
    Thank you

    Hello, is probably Setup to win 8, check it out "Let set me a different input for each Windows application method.

    See: http://www.tech-recipes.com/rx/43337/windows-8-use-a-different-input-method-for-each-app/

    Thank you

  • Windows 7 automatically change the time and date.

    Original title:

    Time changes

    In my HP Pavilion dv6t-3200 suddenly my Win 7 64 bit seems to change the date automatically and when I set to the right time it running an hour and repeat the time I re installed the OS and checked. The problem persists and I also changed the battery and checked them was no change please help me... to solve the problem :-(

    Hello
    1. You have your timezone set correctly? Is - this tick on "automatically adjust clock for daylight saving time?
    2. You did changes to the computer before the show?
    3. Do you have any third-party clock on your computer application?
    We will synchronize the clock of your computer with a time server Internet and check if it works. This means that your computer's clock is updated to match the clock on the time server, which can help ensure that your computer's clock is accurate.

    a. open the Date and time by clicking the Start button, click on the Control Panel, clicking clock, language, and region, and then clicking the Date and time.

    b. click the time tab Internet and then click on change settings. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    c. Select the check box next to synchronize with a time server Internet, select a time server, and then click OK.

    Set the clock

    http://Windows.Microsoft.com/en-us/Windows7/set-the-clock

  • I get BSOD, Multiple_IRP_REQUESTS_COMPLETE and sometimes SQL_NOT_LESS_OR_EQUAL all the time randomly.

    I recently got new hardware,
    Radeon HD 6950 video card
    Corsair Dominator GT DDR3 4 GB to PC15000
    MSI P67A-GD65 Motherboard
    Intel i5 processor

    I installed everything on the disk, but when I went into my browser I instantly BSOD Multiple_IRP_REQUESTS_COMPLETE
    This has happened every time that I went on my browser, sometimes instantly, or up to 10 minutes
    Then I reinstalled my Internet Explorer browser(Firefox) and soon the IE BSOD

    A friend thought that maybe it was Ram related so I did a bios memory test and it worked perfectly
    then he told me to download the minidumps via xfire
    There was something in .sys associated with Daemon tools, so I uninstalled and deleted the .sys file
    It worked for maybe 2 hours until I had another BSOD
    So I decided to just play games (Bad Company 2) until I could get my friend on the computer again, I didn't have a problem with that, up to this that may have been 2 hours
    past and I got the BSOD in SQL_NOT_LESS_OR_EQUAL. I kept getting that at random times playing it.

    The friend finally got online and I gave him the minidumps, and he said that befcm3xp was in the files... Well, which is linked to my modem so I got rid of this file and got him a new file
    At this point the BSOD became less frequent, and after I got the new file I did not get an another BSOD until perhaps 7hours had passed, it was an another SQL_NOT_LESS_OR_EQUAL

    Today, I looked at the internet and got an another Multiple_IRP_REQUESTS_COMPLETE
    so I told my friend I was going to just to get a few mindumps more so he can review and it was an another two SQL_NOT_LESS_OR_EQUAL
    before I gave it to him, he said it is still associated with BEFCM3XP

    I have no idea what to do now
    Here is a link to all my minidumps
    http://www.mediafire.com/?yy1p177kicsrc1p

    Hello

    Driver Verifier can help find some BSOD problems:

    Using Driver Verifier to identify issues with Windows drivers for users advanced
    http://support.Microsoft.com/kb/244617

    How to solve the problems of driver in Windows Vista or 7.
    http://www.WinVistaClub.com/T79.html

    Using Driver Verifier
    http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

    How to use the Windows Driver Verifier Manager to troubleshoot and identify questionshttp://www.youtube.com/watch?v=_VwIDD9xngM Driver

    Driver Verifier
    http://www.techsupportforum.com/2110308-POST3.html

    Using Driver Verifier
    http://www.faultwire.com/solutions/using_driver_verifier.php

    How to use the Windows Driver Verifier Manager to troubleshoot and identify questionshttp://www.youtube.com/watch?v=_VwIDD9xngM Driver

    You can disable the driver verifier
    http://support.Microsoft.com/kb/244617

    Start - type in the box search-> auditor/Reset hit enter to disable

    ====================================

    References to Vista also apply to Windows 7.

    It's my generic how updates of appropriate driver: (look for updates to the BIOS and the driver).

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
    to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
    be older and cause problems. If updates offers a new driver and then HIDE it (right click on it)
    and then go look for new ones manually if you wish.

    Stop Windows 7 to automatically install device drivers
    http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

    How to disable automatic driver Installation in Windows 7 / Vista
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

    Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
    Ultimate and Enterprise)
    http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

    ==========================================

    Tests of memory intercept all errors such as memory do not match (possible even for sticks
    seemingly identical) and when the faster memory is placed in system behind the slower memory.
    So it is best to Exchange also glue in and out to check for those, even if all the tests of memory do not respond
    a problem.

    To test the RAM here control - run 4 + hours or so.<-- best="">
    www.memtest.org

    For Vista/Windows 7 memory diagnostics tool

    Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
    RUN AS ADMIN follow the instructions

    Windows Vista: How to scan / test your RAM or memory with Windows Vista Memory Diagnostic
    Tool
    http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

    How to run the diagnostic tool memory in Windows 7
    http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • What is the problem with the game of solitaire in windows 7? It does not pick up the cards automatically all the time unless you click on the green background.

    I find the new Solitaire is very poor.  When it must be picking up cards that are exposed and for which the lower value cards have already been placed on top of the Ace.

    Basically, this program is very slow on my new Windows 7-32 computer, and you must click all around the green background so he can have the cards on top of the Aces correctly.

    Thank you

    Ron

    Hi Ron,

    You can try the following steps and check if it helps:

    Method 1:

    We can refer to the computer or the device manufacturer's Web site and try to install the latest version of the drivers for graphics cards.

    Update drivers: recommended links

    Method 2:

    If the problem persists, then try to reinstall the game by following the steps described in the previous post.

    For more information, see the link:

    Turn on or off Windows features

  • I want my pc be stopped automatically after a time to fix

    On the night before going to bed, I want to run some programm like classical music / spiritual or any speech so that while listening to it I can go to sleep. In this case, after an hour or two, I can be in sleep and my pc running, so I want it turns off automatically after the time of that fix. How can it be done?

    Hello Kishor,

    You can use a scheduled task to shut down the computer at your desired time. You can do the following.

    a. start the add to the selected task wizard.

    (b) on the second screen of the wizard, you will be asked to select the program to run.

    c. click on the "Browse" button and navigate to the %SystemRoot%\System32 folder (in most cases it is C:\Windows\System32).

    d. Select "Shutdown.exe" and click 'open '. Complete the wizard.

    Refer to the following for more information.

    How to schedule tasks in Windows XP

  • Office in distance and VPN at the same time?

    Is it possible to have an office in distance and connected VPN at the same time without installing any additional software?

    It is certainly.

  • When I go on a site that requires a connection and automatically logged, I always get invited by the Office security software for master password. New w/Firefox 24.

    If I go to a Web site that requires a login and a password, and I have it configured to automatically sign in, I am automatically logged (he remembers username and password for this site), but the command prompt of the security apparatus of software for my master password appears. I can cancel the prompt and it goes, but it should not appear because I am already connected. This problem started to happen after I downloaded Firefox 24 yesterday.

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).

    • Do NOT click on the reset button on the startup window Mode without failure.

    Note that Firefox Sync also need to enter the master password.

  • I m problem that my computer automatically turns off (is not closed correctly at the time of the switches) and when I start it gives message that windows do not close properly seeded.

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Previously I was using WIndow Vista Home Premium but recently I installed Windows Vista Ultimate.I m having problem my computer turns off automatically (is not closed correctly at the time of the switches) and when I start it gives message that windows do not close properly seeded.

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hello

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------
    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    information on errors such as STOP and information such as IRQL_NOT_LESS_OR_EQUAL codes or
    PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during "blue screen of death," collisions
    Displays information on all the "crash" of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, drivers particularly video drivers but it
    are other causes.

    You can do without if needed fail or the Vista DVD or recovery command prompt mode
    Options if your system was installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Why do I get the blue screen of DEATH most of the time when I try to print on my HP Office Jet printer?

    Why do I get the blue screen of DEATH most of the time when I try to print on my HP Office Jet printer?  Almost everytime I try to print to the printer HP Office Jet m I get the Blue Screen of Death in the middle of printing or shortly after that my document is printed.  I then have to shut down my computer and restart it.  I am running Windows 7.

    We need the log files themselves (called a DMP files) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.


    Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

    If you have any questions regarding the procedure, please ask

  • Changes of time randomly in the selector

    All,

    Anyone else notice that Foglight seems to change time on his own? I only noticed this since 5.6.5. As you can see in the example, Foglight randomly has been scaling back an hour from where I can.

    your period is frozen (as the red indicator around the sign of the clock)

    If you pass the mouse over it, you will notice a message indicating that the time is frozen in the past and say that you can click on the dial of the clock to unlock the time.

    There are some actions in Foglight which automatically stop time (for example dig on an alert, digging in a trace). If after this zoom you do not return to the original dashboard in the bread crumb (top of page) but go to a dashboard different Foglight has frozen time so you can investigate any other dashboards in the same time (see for other problems that may have caused the problem that started your investigation/drill down).

    I hope this helps.

    Golan

  • In the past 3 months I lost my computer such as automatic log-ins parameters and settings in outllook

    In the past 3 months I lost my computer such as automatic log-ins parameters and settings in outllook such as "empty my messages deleted at the exit."  I checked my cookies and settings for them and that they are correctly defined if that is the cause.  I'm frustrated to have to manually delete my files deleted before existing outlook and have to connect whenever I do my Bank.  Strange thing is that it does keep my sign-in to facebook so why some and not all?  Is it a hardware problem or software.  I've had this computer for about 1.5 years.  It is also a touchscreen working SOMETIMES but not always.  Looks like a variety of frustrations come all of a sudden.  If you can provide suggestions on how to "solve" these problems, I would really appreciate it.

    Thank you.

    You can use Control Panel / Manager of Credntial to store passwords for automatic logon?

    What is Credential Manager?
    http://Windows.Microsoft.com/en-AU/Windows7/what-is-Credential-Manager

    Store passwords, certificates, and other credentials for automatic logon
    http://Windows.Microsoft.com/en-AU/Windows7/store-passwords-certificates-and-other-credentials-for-automatic-logon

    Are there updated drivers available for your touch screen from the manufacturer?

    Diagnose and repair Office programs by using Office Diagnostics crash
    http://Office.Microsoft.com/client/helppreview.aspx?assetid=HA012340761033&QueryID=swLFe7o9k&respos=7&RT=2&ns=Winword&lcid=3081&PID=CH100964821033

    Work with Office safe mode
    http://Office.Microsoft.com/client/helppreview.aspx?assetid=HP101407921033&QueryID=RvzFVrl-70&respos=2&RT=2&ns=Outlook&lcid=3081&PID=CH100622221033

    Running "outlook.exe /resetnavpane" as mentioned in this article and see if that helps.

    Error at startup of Outlook: "cannot start Microsoft Office Outlook. Cannot open the Outlook window. »
    http://support.Microsoft.com/kb/2022778

  • Wait for the timer using a random time

    I created the workflow that 99% of the time. The 1% that they do not work is because they are trying to post data to a wiki via a call to rest JSON at the exact same second based on the workflow runtime in vCO. If I put in a task wait time I can't understand how I would go about setting the attribute to wait a random amount of seconds. If I just said to wait 1 minute it will still work in the same question which won't help. Also, by saying that it runs to a point in the future not working as both the workflow would use the same code to decide the future time.

    Did someone come up with a way to generate a random number (do you think seconds) with a maximum which could then be passed to the attribute? This would not guarantee but should significantly increase my chances of several workflow calling is not the wiki at the same time. Yes, ideally the wiki would be able to handle this but it can't so I have to find a workaround. Thanks for any help.

    var num = Math.floor(Math.random()*(max - min)+min);
    System.log("Random Number between "+min+" - "+max+": " +  num
    

    You can go there. Just to provide a value for the min and max and you will have a random number generated

  • The log files can be removed automatically in the environment of the HA

    Hi experts BDB.

    I write db HA 4.6.21 the bdb version-based application. Two processes are running on two machines, a master who will be read/write db, one as a client/backup reads only the db. There is a thread in demon master who perform checkpoint all the 1 second: dbenv-> txn_checkpoint (dbenv, 1, 1, 0), and dbenv-> log_archive (dbenv, NULL, DB_ARCH_REMOVE) will be called after runnng checkpoint each time. The env has been opened with indicator: DB_CREATE | DB_INIT_TXN |  DB_INIT_LOCK | DB_INIT_LOG | DB_REGISTER | DB_RECOVER | DB_INIT_MPOOL | DB_THREAD | DB_INIT_REP;   Autoremove indicator has been defined: envp-> set_flags (uid_dbs.envp, DB_LOG_AUTOREMOVE, 1) before open env.

    I found this thread https://forums.Oracle.com/message/10945602#10945602 , who discussed non-ha environment and I tested my code in an env without DB_INIT_REP non-ha, it worked. However in HA env these log files were never deleted. Could help you in this matter? The customer needs to run checkpoint? Can it be a bug in the bdb?

    Thank you

    Min

    There is a thread in demon master who perform checkpoint all the 1 second: dbenv-> txn_checkpoint (dbenv, 1, 1, 0), and dbenv-> log_archive (dbenv, NULL, DB_ARCH_REMOVE) will be called after runnng checkpoint each time. The env has been opened with indicator: DB_CREATE | DB_INIT_TXN |  DB_INIT_LOCK | DB_INIT_LOG | DB_REGISTER | DB_RECOVER | DB_INIT_MPOOL | DB_THREAD | DB_INIT_REP;   Autoremove indicator has been defined: envp-> set_flags (uid_dbs.envp, DB_LOG_AUTOREMOVE, 1) before open env.

    I do not say that this is causing a problem, but make the DB_ENV-> log_archive (DB_ARCH_REMOVE) in your thread and setting DB_ENV-> set_flags (DB_LOG_AUTOREMOVE) are redundant. In your thread, you control the timing. The DB_ENV-> set_flags (DB_LOG_AUTOREMOVE) option checks and removes unnecessary log files when we create a new log file.

    Have you seen in the documentation of DB_ENV-> set_flags (DB_LOG_AUTOREMOVE) we do not recommend do deleting files of automatic newspaper with replication? While this warning is not repeated in DB_ENV-> log_archive (DB_ARCH_REMOVE), it also applies to this option. You should review the use of this option, especially if it is possible that your customer could go down for a long time.

    But it is a warning and automatic log removal should work. My first thought here is to ask if your client has recently experienced a synchronization? Internally, we block archive on the client during certain parts of a synchronization master to improve the chances that we will keep all records required by the sync client. We block archiving for 30 seconds after the client synchronization.

    I found this thread https://forums.oracle.com/message/10945602#10945602 that discussed non-ha environment and I tested my code in an env without DB_INIT_REP non-ha, it worked. However in HA env these log files were never deleted.

    This thread is to discuss a different issue. The reason for our BDB 4.6 warning against the use of automatic elimination of log with replication is that it only takes into account all sites in your replication group, so that we can remove a log of the master who always needs a client.

    We added remove auto journal group that supports replication manager replication 5.3 BDB, and this discussion is about a change in the behavior of this addition. With this addition, we no longer need to recommend against the use of elimination automatic log with replication in BDB 5.3 and later versions.

    Could help you in this matter? The customer needs to run checkpoint? Can it be a bug in the bdb?

    I'm not sure that the customer needs to run its own control points, because it performs checkpoints when it receives control point of the master journal records.

    But none of these options to delete log on the master does nothing to remove the logs on the client. You will need to do the following: to archive logs separately to the customer and the master.

    Paula Bingham

    Oracle

  • Date/time is driving me crazy.  How to set the time automatically?

    Okay, okay.  I hope someone can help me here!

    I tried this in Acrobat Pro first, but I don't know Javascript and therefore could not change the script "Call Date" to get the time instead.

    Fortunately, I also have Livecycle and everything looked so simple, BUT it does not work.

    Let me explain what I'm trying to do.  My boss asked me to develop a form of seizure of newspaper where, after the user types an entry and that leaves the field then the time of entry is automatically saved.  This field should be read-only.

    I created a text field (to act as the journal entry form field).  I then created a Date/time field.  I went to the link and he changed time.  I changed the value read-only and then the model of hh: mm A.

    Implement the action when the user leaves the text field, the value in the DateTime field is inserted automatically.

    It works great EXCEPT that I only have the DATE!  I tried protected ReadOnly (calculated) etc.  This requires a script to be called... the very thing that I wanted to avoid because I can't code.  Duration worked a little - in the PDF itself, when the user leaves the text, the date AND time field appears, but if you click this field, the time is updated.  I don't want to not be updated.  My boss wants to see the time that the log entry was completed if it is not editable by the user or set to date.

    I hope I'm clear as to what I need.  Can anyone help?  Hope so!

    Thank you-

    -carrie

    1. Open my form in the designer.
    2. Highlight a field that gets locked.
    3. In the script editor (above the form design, but below the menu items) in the upper left is a drop-down list labeled Show. This is a list box that displays all the events taken in charge this object. Anything that has the code will have an asterisk next to it. In our case, th eexit event will have code. Choose the exit event and the code will appear in the script window.
    4. Highlight all of the code including the fi and endif statements (do not choose the 1st line having form1. #subform...). Copy this code to the Clipboard
    5. Now, open your form. To change the default language to FormCalc instead of Javascript
    6. Under form th Ted/Properties/menu Deafults in the middle of the screen to ensure that the default language is set to FormCalc and not Javascript and make sure that the default run to a customer value (on by default)
    7. I guess you do something similar where you have a field and time of newspaper next to her.
    8. Make sure each field and the corresponding time Journal game field has a unique name.
    9. Now kighlight the 1st field you want to lock.
    10. In the script editor, choose the exit event (as we did before)
    11. Place the cursor after the 1st line in the script editor and paste the code located in the Clipboard in the script editor.
    12. Now, we need to edit the script to point to your object names. I pasted a version of the code below... .teh part in red is the name of my item... .you need to edit it to point to your object names. She's.

    If ($.rawValue <> null) then

    Log1.RawValue

    = Num2Time (Time (), 'HH')

    .access $

    = "readOnly".

    endif

Maybe you are looking for

  • Satellite Pro L50 - B - no display at the start of

    Hello Problems with getting my L50 - B to initialize display. Everything else is running, but the display won't start at all - I just get a full black screen. I tried without success to the following: (1) connection to an external display to work2 po

  • HP Battery Check: - Unknown state (94)

    Hello. I wanted to run the HP Battery Check to know how was my battery. But it does not recognize my battery. My battery seems to be getting worse lately, and it does it not take a charge as long as it used to do. I downloaded the latest HP Support A

  • How to disassemble CQ57 without access to the battery compartment

    So I asked How to get the lock take off or someone for pointing me to a picture of the battery locking mechanism and same day where 'experts' no one answered... while I can't to the screw in the battery compartment, how disassemble to replace a hard

  • Dual boot Windows vista 32 bit with win 7 64 bit

    Is it possible to dual boot Windows Vista Business 32-bit with Windows 7 Professional 64 bit I do not want I want to have two operating systems Now, I have a 25 GB Partion ready for Windows 7, I only have Vista currently. Apparently XP32Bit can dual

  • small font, small page

    Everything is smaller, the font size, page size, etc.. I tried to restart, but no change.