OfficeJet 4630: Can not find the Option of Scan OCR

Similar Questions

• Can not find the option the Structure of the Insert panel (was: Dreamweaver CC 2015)

  I'm doing a web page in Dreamweaver CC 2015... In the Insert panel I can not find the option "Structure." Can you help me??

  Hello

  With release Dreamwever CC 2015 Insert Menu is restructured and all the options available in the option of the Structure lies in Insert > HTML

  

  You can also find them in to insert Panel by selecting HTML in the drop-down list.

  

  Concerning

  Vivek

• Can not find the driver of scan to PRINTER ALL-IN-ONE KODAK ESP 5210

  Can not find the driver of scan to PRINTER ALL-IN-ONE KODAK ESP 5210. Device Manager says last driver is installed.

  Moved from feedback

  Original title: scan driver

  Hello Timmy,

  Please take a look at the following link for the driver\firmware for your printer.

  KODAK ESP 5210 All-in-One Printer Firmware - WINDOWS operating systems

  If this is not enough, you may have contact with Kodak support for the same. Thank you.

• Printer Officejet 5740: can not find the claim code to register the printer Officejet 5740

  I printed the map which is supposed to have the claim number, but it's not about it, there only diagnostic results.  I can't find it on the box or the other.  This printer is going to get knocked down a star in a review to be a PITA for the program installation, but right now I need the application number if my wife and I can use it for work and college classes.

  Hey there @douglasrob!

  Thanks for posting on the HP Forums!

  EPrint is when an e-mail address is assigned to the printer.  Once this electronic address is assigned you can then send emails to the e-mail address of printers and the printer will print the email.  If the printer cannot connect to Web Services which means that eprint is not connected either.  The reason why you are able to print from the iPad is because it communicates through your network send printing to printers IP address not the Eprint address.

  When the devices are connected to the network (router) it means other devices connected to the same network may be.  Connecting to Web Services the printer attempts to access the internet through the router.  The printer is connected to the network, but something is not allowing it to connect to the internet or the Web Services server.

  One suggestion would be to change the DNS (Domain Name Servers) on the printer.  If the automatic DNS in the printer is incorrect then the printer will not be allowed access to the server of Web Services via the router.

  To change the DNS of the front of the printer, you must:

  1. Tap the settings icon.
  2. Press the Network Configuration.
  3. Press wireless settings.
  4. Scroll down, and then press advanced settings.
  5. Press IP settings.
  6. Press manual (static).
  7. Press OK and ignore the message.  You do not change the IP address just the DNS.
  8. Scroll down and press DNS address.
  9. Type 008.008.008.008, and press done.
  10. Press on apply.
  11. Return to the start screen on the printer and try to activate Web Services again.

  Let me know how it goes.  If this does not work, I should be able to locate another step to try!

• can not find the option to search my country only - was available on older versions

  I was able to change the location of the research in South Africa only in previous versions. Y at - it an option that I am missing or it is no longer available?
  It's under 'Search tools' before.
  Thank you for this
  Bruno

  Go to this site:
  http://ready.to/search/en/

  In a new tab, go to the page of specific research in the country. In this example I'll use Google ( http://www.google.co.uk ) UK, but replace all what you need.

  In the search box type in:
  ABCD
  And perform a search.

  Now take a note of the URL of search. in my case, the URL is
  https://www.Google.co.UK/?gws_rd=SSL#safe=off & q = CALL

  copy/paste-all before (but not including) "abcd" in the box marked
  the front of the search term: Url-template (prefix)
  In my case would be: https://www.google.co.uk/?gws_rd=ssl#safe=off & q =
  If something appears after as "abcd" (it is not in my example) that stuck in the box marked
  the back of the search term: Url-template (suffix)
  Otherwise leave blank.
  In the box
  the name of the search: ShortName
  Type what you want to call the search provider, in my case it is "Google UK" but put everything what you like.

  Now click on the 'Make the Plugin' button, the button should change to "Modify the Plugin" do not click on this, as there must be a link called
  OpenSearch Plugin < someone ' u called >
  Click on that. Firefox will ask you to confirm the addition of the search plugin. Check to make the default plugin and click 'Add '.

  That should do it.

• can not find the option to save the symbol

  Hello world

  I created a symbol, but I want to save it as a vector graphic

  to use in other programs. I don't want to save the entire file

  but all the options I find by record export file have integer

  I want just the symbol. Any ideas?

  
  Ted.

  PDF or eps.

• Why can not find the option "Transfer of data and memory" in the channel property node?

  Hi all

  I'll try to find some properties such as "data transfer and memory" in my node property 'DAQmx' Channel, as below ".

  But in my Labview 8.5, I can't. I reinstalled the NOR-DAQmx driver, but it didn't work. What I get is

  

  I missed something? Thank you.

  Kind regards

  Bo

  Hi Bo,

  Take at look at this knowledge base article.

  3ESBHEL2 Ko AE: lack of properties in the DAQmx nodes property

  Let me know if this solves your problem.

  Concerning

  John P

  Technical sales engineer

  National Instruments

• can not find the window Task Launcher options

  can not find the window Task Launcher options

  If you are referring to the Microsoft Word Task Launcher, in, click on the menu _ Word file > then click 'new '.... ». The Task Launcher is displayed on the right.

• HP Pavilion g6-1310ea: can not find the ethernet controller driver

  I reinstalled Windows on my HP Pavilion g6 - 1310ea and can not find the drivers for the Ethernet, PCI Device and SM Bus controller controller. There seems to be no more this kind of drivers on hp suupp.

  Hello:

  I can't even to the driver page.

  Here are the drivers you must however...

  Ethernet controller: download and install the 2nd driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 14 & PFid = 7 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

  PCI device: Download, unzip and run the exe file to install from the first item on the list at the link below...

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 15 & PFid = 25 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

  SMBus Controller: This is not on the driver page even if it worked...

  I zipped and attached to the driver that you are interested in below.

  Download and uncompress the file in its folder.  Don't do anything with the files in the folder.

  Go to Device Manager and click the controller smbus who need the pilot.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.

  Then restart the PC.

• I can't find the option on my w520 where I put the threshold (96%) to start to load my dough

  I have looked through all the settings and can not find this option more. I know it works because I'm hip and I see 98% and it goes not upward. I often have to move my computer autour and unplog and plug a lot, so I want to put this threshold to 90%.

  It is in the power manager. Click Advanced, and then go to the tab of the battery. You will see the battery maintenance button there.

• Deinstitutionalized drive, my computer can not find the music stored on the internal drive

  I was recently released from the balance of PAYMENTS (Bureau of Prisons), and I gladly paid $25 for the reader deinstitutionalized. I got it in the mail and I am very happy with the improvements, however, when I plug it into the computer, the computer cannot find the music that I invested a lot of money.  The drive works fine.  I can listen to all the songs that are on it, but I can't find them with all software, including the software downloaded from Sansa. When I click on the player, in any program/browser, I get the same thing: the folders that are empty.  It saves space, but sees ALL files.  Many of the albums available at the bottom of the PYRAMID were incomplete and I want to "fill the gaps", but can not find the whites to fill.  Any help would be wonderful.  I paid my $95 (for the player AND have unlocked it) MORE about $1400 in the songs, so it's a pretty big deal for me to get access... Thanks in advance.

  My guess is, it is a question of USB MSC - MTP mode.

  Your drive may be connected to your computer in the title of one of the 2 separate USB MSC or MTP modes.  This is located under settings of the player.  (There is a 3rd option it, auto-detection, trying to connect under MTP mode but then fold in MSC mode, if necessary.)  Is the reason why it's important, files transferred to the Clip under a mode USB can only be seen by your computer when the computer is under this same mode.  And so, for example, if the songs are put on the player mode USB MSC, if you connect later under MTP mode, the computer will not see these files.  If you have set the player to one of the USB modes and always use this mode (MSC mode is the least problematic, in virtue of which the player is considered to be a USB key; however, MTP mode is necessary for files protected by DRM), you're fine.  If, however, you change mode, emits a "invisibility".  And if you're ready auto detection, the computer can change the modes on you without you knowing.

  And thus, better Board: turn on the player (recommended) MSC or MTP mode and stay there and stay away auto detection setting.

  And if you have been on a mode but want to switch to the other and to be able to see all of your files on your computer, set the player to the previous mode, transfer your music to your computer and delete them from the player, re - set the player to new USB mode and transfer the songs back.

• Cannot install Windows XP on my Probook 4520 s in mode ACHI... can not find the correct drivers anywhere!

  Hi all!

  I'm a newbie here, please help me. Just bought a new laptop, 4520 s and can not install windows in AHCI mode. Very strange things are below:

  -I'm reading on this tread: http://h30434.www3.hp.com/t5/Operating-systems-and-software/No-SATA-AHCI-drivers-for-6440b/td-p/2592... And I havea even question...

  -Have these:

  PCI\VEN_8086 & DEV_3B2D. DeviceDesc = "Intel(r) 5 Series/3400 Series Chipset Family 2 port Serial ATA Storage Controller - 3B2D.

  PCI\VEN_8086 & DEV_3B2E. DeviceDesc = "Intel(r) 5 Series/3400 Series Chipset Family 4 port Serial ATA Storage Controller - 3B2E.

  Hardware items, but can not change driver PCHM SATA AHCI Controller 4 Port or Port 6 ...  BSOD and reboot even when...

  -tried to find out all the correct drivers, no results...

  -When it is used the nLite and running the Windows installation again with ACHI (setting in BIOS) mode I just receive this message in the first minutes of blue screen: can not find the ACPI. SYS... Press a key to reboot.

  Help me please guys, if you can.

  Thanks in advance, Peter

  I had the same problem and now works properly. That's what I did:

  1 position (BIOS) setting to IDE compatible mode

  2. install XPP as usual.

  3. install the drivers for the chipset Intel (sp46692)

  4. download and run softpaq for Intel Matrix Storage Manager (sp45106)

  5. go to the controller Start > Run > devmgmt.msc > IDE ATA/ATAPI

  > Port controller 5 series/3400 Series 6 Chipset

  6. set to update manually the folder c:\swsetup\sp45106, with option "have a disk.

  7. Select "PCHM SATA AHCI Controller 6 port".

  Windows says it is not compatible, but it will be restarted from the nest

  8 restart the computer, and set its mode controller SATA (BIOS)

  9 complete! Windows does not boot ok

  I hope you understand my instructions: English is not my mother tongue and may be poorly written. In any case, it worked for me.

  Miguel.

• HP deskjet 3050 a j611 can not find the driver software when connected

  I tried to plug my new printer Hp deskjet 3050 a j611 range but can't get furthur than coonecting because it can not find the driver software. I had to download the driver software myself via this link http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=5061082& but once I downloaded that and is entered in the details of the wireless connection, it cannot find the driver software. I can't use the CD my drive is broken and I am awaitng delivery of an external in a few weeks, but I'd like to get my printer started. Help, please

  Hello Buzbybumble

  I looked into it further and found that all J611 Deskjet 3050 a models use the same software. So, you should be able to download and run the installation from the link below.
  Software HP Deskjet 3050 has complete features J611

  IMPORTANT: Make sure that the printer is not connected to the computer until the installation program ask you to do. Run the Setup and follow the instructions on the screen.

  If the printer is not yet seen, then choose the option "continue INSTALLATION WITHOUT CONNECTION NOW I WILL CONNECT the PRINTER LATER. A shortcut must be placed on your desktop and it will try to add a printer when it is executed.

• Where can I find the option "Enable the device" in the settings of my account?

  I would like to activate a second laptop to be able to work at home after hours. Where can I find the option "Enable the device" in my Adobe Creative Cloud account settings?

  In addition, no knows the minimum requirements or the latest MacOS, which is required to install the Adobe Creative Cloud App on my older laptop MacBook Pro. Is the correct information, "Mac OS X v10.7 or later?

  Hi Khpet_kr,

  You can have the creative cloud installed and signed in on two computers as long as you don't use it on one at a time. Download and install as you did on the first computer, sign in to your Adobe account on the Adobe using your Adobe ID website, download the desktop app from clouds, then download the software. Sign on a computer that should not be used: log in and log out of the desktop Adobe Creative Cloud application

  You can also check: Learn how to enable or disable Adobe applications

  For system requirements, please visit:system requirements | Adobe Creative Cloud

  Let us know if you need more information.

• How to anchor on other sensitive design objects?  (I once saw a video of adobe and can not find the link now)

  How to anchor on other sensitive design objects?  (I once saw a video of adobe and can not find the link now)

  Check the 'Smart Position' option in the advanced part of the Position properties. Drag the "anchors" that are normally found at the top and left side of the blade up to what they encounter the side of the object you want to anchor to (a blue line appears, you can release the mouse then):