After the download of Windows XP SP3

Similar Questions

• Sounds and Wi - Fi are unusable after the awakening of Windows XP SP3 of stand-by

  original title: XP SP3 cannot wake up from standby correctly

  I recently upgraded my system from Windows XP SP2 to SP3 and installed onenote 2010 professional office 2010 but still not active. I found if I maintain my system, and cannot be used as alarm clock, sound and wireless.

  When I click the speaker button, I can hear the sound of 'Bang', which implies a mistake, and a pop-up box displays saying that «...» No audio mixer table cannot be found... ». I can't play music or watch the video.

  When I find out wireless available in the range, he said: "another program manages wireless" these words. But I have installed no utility to manage my wireless.

  There could be another problem. So far, I find just above two.

  After the system restarts, everything is recovered, until next time, I stand by my system.

  Hi Edwin.Xi,

  Given that you have upgraded your system from Windows XP SP2 to SP3, you may need to consult the manufacturer's Web site and download and install the latest version for Wi - Fi and sound drivers and check if that helps:

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  You can view the following articles in the KB for more information:

  How to solve the problems of hibernation and standby in Windows XP

  http://support.Microsoft.com/kb/907477

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Computer hangs for 15-20 minutes after the start of Windows - WinXP SP3

  Whenever I start my computer, once Windows has started (all the desktop icons have appeared), my computer treats something for 15-20 minutes, but I don't know what it is.  It freezes my computer for 15-20 minutes.  I don't have a lot of many software installed and there is no popup windows saying that some updates are being installed.  I have Win XP SP 3.  Can you help me?

  Hi KMForward81,

  ·         Have updates you installed?

  ·         You get the error message?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Run the disk check to check for possible errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  For reference:

  How to make a computer faster: 6 ways to speed up your PC

  Slow PC? Optimize your computer for peak performance

• Cannot get get world of Warcraft to work after downloading Windows XP'Cannot world of Warcraft to work after the download of Windows XP

  Original title: can't get wow to work after downloading

  OK, so I downloaded WoW and everything was just great.  Then it says download patch, then he brought me to a screen that has been downloaded from the other stuff.  After that, he took back me to the screen of the installer.  It don't did me not the option to play or download any patches, instead, it gave me the option to download the game again.  However, I have already downloaded the game.  Why he let me fall used load patches?  I thought maybe it was a question of the user, so I took possession of the file, disabled sharing files, and I logged in as an administrator.  Still will not work.  I use windows xp professional.  Anyone have any ideas as to what is wrong?

  Hello

  ·        Where did you download the patch for the craft of war?

  ·        What is the version of the patch?

  Step 1:

  I suggest you do a clean boot and check. To perform a clean boot follow the steps mentioned in the link given below.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: Once you have finished installing, follow step 7 to start the computer in normal startup.

  It could be that the patch you downloaded is corrupt. I suggest to re-download the patch and then try to install it on the system and check out them.

  To further support I suggest you post on the world of the art of war forums. Click on the link below.

  http://forums.worldofwarcraft.com/

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have no sound on the computer after the installation of Windows XP.

  After the download of Windows XP in a torrent of the 'P2P' file on a disk. Then I installed it. But now, there is no audio device.

  Anyone know what I can do?

  Original title: no sound after installation of windows XP

  Hi paowie1,

  Thanks for posting your query in the Microsoft Community. You seem to have a problem with the no sound on Windows XP. We can get this fixed number by systematically. It can be frustrating for you. But, don't worry, we're here to help.

  We start with a few questions-

  (1) don't you perform a clean installation of Windows XP?

  (2) what is the brand and model of the computer?

  (3) have you done other changes on the computer?

  I would like more information about the issue.

  Method 1-

  I would have you look at the article-

  How to troubleshoot sound problems in Windows XP

  http://support.Microsoft.com/kb/307918/en-GB#top

  Method 2-

  I would have you look at the article-

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  We know if you need help. We will be happy to help you.

  Thank you.

• How can I restore Adobe Acrobat Professional XI (bought earlier this year, in February; education version) after the restoration of Windows 7 to factory settings? I tried the download link provided by email I received when I just bought, but it didn't wor

  How can I restore Adobe Acrobat Professional XI (bought earlier this year, in February; education version) after the restoration of Windows 7 to factory settings? I tried the download link provided by email I received when I just bought but it did not work.

  Hello

  Use the following link to download:-

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-downloads.html

• Suddenly cannot open new tab, immediately after an update of MSWindows7, or after the upgrade to Windows 10 - tired, all kinds of bugs, no luck.

  Never had this problem until what MS downloaded and installed updates (for Windows7). So I said I'm going to widows 10 because I thought anyway, so I did this - still cannot open a new tab, or by clicking on the tab '+' or 'ctrl + T.
  I spent about an hour going by most of the measures that have been provided by the support of Mozilla tech note and it did not help. I'm not going to create a new FF profile.
  I restart my PC, nothing helped. I chose "never" (I forgot the exact wording) on all the Plug Ins and then rebooted and this did not help. I have not loaded Extensions.
  I installed FF for Windows 10 just after the installation of Windows 10.
  I am a user of whether average PC.
  Thanks for any help you can give,
  Steve V.

  Dear cor - el,

  Now, I'm happy! Thank you very much.

  New tab works now. It is because of me running the first program malware that you listed above, Malwarebytes. I am grateful that you suggested it because I would not have thought that that would be the problem (because the problem occurred immediately after a MS Windows7 update.

  Anyway, thanks again for sharing your time and skills.,.

  Steve V.

• After the upgrade to Windows 10, I can't send mail from my IMAP account

  Upgrade to Windows 10 last night. Make a backup on MozBackup beforehand and restored after the download. I see all my messages in my Roadrunner and Gmail IMAP accounts. I can receive messages from all three types of accounts, but I can't send emails from the IMAP account. I checked that I have the right selected outgoing server. But whenever I try to send, I get the error:

  An error occurred while sending mail. The mail server responded:
  Action taken not requested: the mailbox not available
  Invalid DNS MX or the A/AAAA resource record.
  Please check the recipient of the "[email protected]" message and try again.

  Although looks like your new update of windows 10 has not the right or any other DNS servers set up. Thus, when Thunderbird is trying to send a mail it it looks like for the server and there is no... you can navigate t goole, com using this machine and one web browser other than the one provided with windows 10.

  The alternative is the email address your shipment to the a in the faulty DNS entry

  Research here shows that this is the case. The field of your shipment at all simply not exist in DNS.

• Satellite P855 - function keys do not work after the upgrade to Windows 10

  Function keys do not work after the upgrade to Windows 10
  I know that I need two drivers (Flash cards support utility) and (Toshiba function Key Utility), but on the page download Toshiba is not suitable for Windows 10.
  Anyone know when and if it will be available?
  Thank you

  I'm also waiting for Win10 of things and do not know with certainty how Toshiba will start with the support of Win10. I hope that will happen soon.

• ITunes does not start after the installation of Windows 10

  ITunes does not start after the installation of Windows 10, 1511 version (OS Build 10586.164). ITunes version 12.3.2.35, 6 GB RAM, Intel i3 @3.3 GHz. Itunes and Ipodserver module will run by Manager jobs, but Itunes does not open. iTunes starts in SafeMode as explained in the link below (hold SHIFT and control on your keyboard while you open iTunes).

  Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support

  Solution, according to this link, is:

  If the problem does not occur in Mode safe, remove any third party plug-ins iTunes: solving problems with third party plug-ins - Support Apple iTunes but the link has been archived, and I can't find any plug-ins installed iTunes. Any other ideas?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Volume controls on the keyboard after the upgrade to Windows 8

  I have a Touchsmart 520-1070 with the mouse and keyboard without wire factory.  After the upgrade to WIndows 8, the volume controls no longer work.  I tried the Recovery Manager to reinstall the keyboard drivers, but there is no driver keyboard under hardware drivers.

  In the following device manager are listed under keyboards:

  HID keyboard device

  Keyboard 109 MCIR Microsoft eHome

  Keyboard MCIR Microsoft eHome

  Microsoft eHome key remove control Keayboard

  PS/2 standard keyboard

  Any report that they are installed and are working correctly and that the drivers are up to date.

  Has anyone else seen or solved this problem with a Touchsmart computer?

  The instructions below were provided by HP support.  This has restored the function on the keyboard volume controls.  The referenced below drivers are drivers IDT high definition Audio Device.  I am not sure that it was necessary to reinstall the audio drivers.  It can only had to remove the USB dongle and back to restore the functionality of the button.  Note: the USB dongle is located behind the VESA Panel to the back of the PC.  No tools are required and the dongle can be removed and replaced without shutting down the PC.  VESA panel removal requires a bit of a steady hand, pulling the lip which is close to the connections on the rear panel.

  Instructions received from HP:

  Please go to the following link and check the "return of the system", article #7 is the USB dongle:

  http://support.HP.com/us-en/document/c03026390

  After you have reinstalled the receiver, please download and install the following driver:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-110499-1&CC=US&DLC=en&LC=en&os=4132&Product=5157120&sw_lang=

  Then install the following update:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-112060-1&CC=US&DLC=en&LC=en&os=4132&Product=5157120&sw_lang=

• HP Photosmart C6280: cannot print on C6280 wireless after the upgrade to Windows 10

  Cannot print on C6280 wireless after the upgrade to Windows 10. Have removed the device, but try to re install the printer when is not found. Can print if I connect USB. Tried to reload the driver using HP Support software help, but when he arrives at the end of the download fails.

  Hi @Ron9871,

  Welcome to the Forums of HP Support!

  I see that you are unable to get your printer HP Photosmart C6280 wireless printing. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I would like to try the steps in this guide, "offline" Status Message printer (Windows 10).

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  • Print a Page of Network Configuration menu of the printer front panel. Note: the IPV4 IP.
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.

  Please restart the router, the printer and the computer in this sequence.

  If you're still having problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  You can try to change your WSD printer port by a Standard TCP/IP port.

  To do this, you will need your current IP address printers.  The Network Setup page shows the parameters of network for the product. To print this page; Press the button of network () on the control panel of the product.

   

• Using XP Professional... problems caused after the download of Service Pack 3

  Using XP Professional... problems caused after the download of Service Pack 3

  Using XP Professional... problems caused after the download of Service Pack 3

  Only these security updates are not downloaded successfully:

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2742596)
  Security Update for Microsoft .NET Framework 3.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2756918)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2789643)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2804577)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2833940)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2844285)

  Microsoft Fix - It ran... computer & rebooted... closed repeatedly...

  Problem persists... Help!

  Lane

  It is a common problem with updates of .NET. Here are the steps I follow

  First try this...

  Download and run the Microsoft .NET Framework repair tool , then visit Windows Update and let it try to reinstall updates. Once it's done, scan again with Windows Update to ensure that they properly installed.

  If the above does not make it...

  Open Add or remove programs, click on .NET 3.5 and choose repair. I got around to test if this fix actually .NET 2.0 and 3.0 of the .NET also, but it's worth it. I do not know if it can also cancel updates already installed .NET. If so, they will reinstall when you perform a Windows update that is the next step after the repair.

  If the repair does not fix it, will add and remove programs and uninstall the .NET Framework 3.5, 2.0, then 3.0.
  Visit Windows Update, select Custom scan and under software, optional install this...

  

  It must be installed by itself. Windows Update will not let you do otherwise.

  When he did install (I forgot if she asks for a restart or what not), scan again and all updates for .NET 2.0, 3.0 and 3.5 of the .NET .NET must appear. Choose to install.
  A new analysis to ensure that they properly installed.

  If all goes well, that will solve the problems you face.

  Make sure you come back and let us know which method worked for you or if you still have problems, I have to run a cleaning tool.

  Good luck!

• Laptop Compaq CQ58: LAN Ethernet does not work after the upgrade to windows 8.1

  After the upgrade of Windows 8 to 8.1, my Ethernet LAN is no longer in effect. Wireless LAN connectivity is OK. I run the HP Support Assistant and downloaded the drivers for 8.1. Hovever, I don't see a listed 8.1 for the LAN Ethernet driver.

  It seems that you encounter the same problem, I did when I ran the free preview of the W10. I had this error on the card reader.  I have no idea how to solve this problem.

  Is there is no ethernet controller needing drivers in Device Manager, then it is probably the realtek lan adapter that has the number 12 of the code, or it is part of the motherboard that controls the ethernet adapter.

  If you need Atheros bluetooth driver, then this is probably the one you need.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_127984_1

  Unfortunately, I won't be able to help you with question 12 code or ethernet.

  IMO, they are insoluble.

• Missing graphics drivers after the upgrade to Windows 8?

  Hey guys,.

  I see several people on the forums of the problems with graphics drivers not installed after the upgrade to Windows 8.

  The first step you want to take, make sure that the laptop is supported by Windows 8.

  You can go HERE and see if your laptop has been tested for Windows 8. If she's GREAT!

  Now, if you're still looking for the graphics drivers according to the processor you have there are several places to look.

  First of all, you want to check the HP website and your product type # in the next selection > and then select the operating system > click Next > and look under the section that says "Driver - Graphic" and start the download.

  If you still don't see the driver referred to in this article, you can see one of these sites according to what processor you have.

  INTEL

  AMD

  Also, if you have Windows 7, you can still follow this post.

  THX

  I hope it's useful!

  THX