HP Envy hinge problem

Similar Questions

• HP Envy 17 Notebook PC TS left hinge problem

  Left hinge on my HP Envy TS 17 Notebook PC pushes the lower lid of my laptop open whenever I open and close my laptop. My desire is quite recent and it is still under the one year warranty.

  Hello

  Yes.  MY problem is solved.  Company and I got the replacement unit successfully.

  Note: If you have a lot of software installed, especially of VMs on your current laptop, so my personal advice would be to get the repaired unit, I came across the problem to reactivate the license think little software, I do several facilities and refuse activation.   However after talking to the licensing issue has been resolved, but it consumes a lot of time.

  However, if the activation of the license is not a problem for you then unit replacement is better.

  Concerning

  PS. but in the new laptop also, I always get a little tic noice when I open and close the laptop from the left hinge.   That is why I it opens very slowly.  I have just pray and hope that it does not break.  because I get 2nd replacement.

  --------------------------------------------------------------------------------------------------------------------

  Hi JigneshDesai,

  mjhuang (honor student) released a new response Notebook Hardware on 27/09/2014 23:47

  Subject: Re: HP Envy 17 Notebook PC TS left hinge problem

  This answer solve your message or question?

  If so, then share the good news! Inform others that this response was helpful in accepting this solution.
  You can also show your appreciation by giving congratulations.

  We appreciate your comments. It's what keeps our community a useful and dynamic place for our members.

  Thank you for being a Member!

  Forum HP's Support team

• Hinge for the HP ENVY dv7 problem

  I bought a HP ENVY dv7 two years December 6, 2012.  I don't really know when this hinge problem started, but when I saw the first time I've been a bit supprised then ignored it, thinking it was no big deal. But then he began to cause more problems than time and whenever I opened my laptop, problems such that the angle of the face has been slowly poping up and the window too.

  I now could push corn on the backs of the part to place when never opened the laptop and the part comes out even when I close, so I would it push in place.

  Last night, I discovered that the rear corner detached reveling inside the laptop when closed. I found the piece broke not for long. I think the part that is interrupted when I was placing the laptop inside my bag.  On a side note, not once I have droped laptop.

    

  Piece                       Side view                                                                                                         Back View Closed

  Is there anyway to fix my problem of Hindge?

  In fact I recently fixed it my self...

  I guess the screw jumped and it is the only screw that holds one side of the hinge in place.

  I just replaced the missing screw with one of the screws in back and it's been fixed just like new. Well other than breakage of exhibits... I also noticed that the other screws were not tight all the way.

  I hope this helps.

• Hinge HP Envy Dv7 problem

  I bought my HP Dv7 Envy around 2 years now and the laptop itself works very well as usual. However, a year after his life, just after the warranty expired - the left hinge problem that seems HP Envy laptops computers riddle has occurred, causing damage to the carcass and the laptop overheating.
  It was repaired by HP, but now the question is back again - causing my case crack and crack whenever the laptop is open and to substantially increase the heat of the laptop even during low stress activities, but also a slight separation between the base and the screen of the laptop and the screen "dive" to the left.

  Student, money is quite difficult to find being and pay fix the obvious flaw in the design of HP laptop is not plausible, especially if the problem is recurring. Should what course of action I take? I am not happy with my also portable to the same problems that were laid off under "faulty subwoofer" last time.

  Hi OscarLloyd,

  I just sent you a private message. If you are unsure how to check your messages from the forum, this post has instructions.

  Thank you.

• HP Pavillion m6 1005tx laptop hinge problem

  I have been using HP Pavillion m6 1005TX for 1.5 years. But from the beginning there was problem in the hing of the laptop. He made his 'kad - kad' when I open or closed the laptop. And, by the way of 3 of my friends who have the same laptop reported the hinge problem. I want to know, is this a manufacturing defect?

  If yes or no! Is it covered under warrany?

  I need the replacement of hinge and defective parts. Please give your insight.

  My warranty is valid until August 15, 2015.

  Thank you for your valuable comments. The troubled free hinge changed HP service center. It is covered by the warranty. I appreciate HP for fast service.

• HP Envy m6: hinge problem

  Hello world

  I'm having the same problem of hinge than many other people with my Hp Envy m6. It is more under warranty and I wonder what are the options I have. My laptop is everything to me because I'm in my last year of college and I'm also a DJ is an essential part of my life.
  
  Bottom left of my screen (black plastic part) is cracked due to hinges loosens. I see many other people are having the same problem, but it becomes serious on my laptop as the screen begins to blink if I move the laptop.

  Could someone please point me in the right direction as seems to be a problem with the hardware as one number of others have the same problem.

  Thank you for your time,

  Brendan Lambe.

  @Lambo067

  Please use the Forum from HP Support. I brought your question to the team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display (numbers series and information).
  
  If you are not familiar with messaging private forum please click here to learn more.
  
  Thank you
  Omar

• HP Envy Ultrabook 6 t-1100: left hinge problem 6 t-1100 HP Envy Ultrabook

  I have a problem with the left hinge of my laptop. He has popped up on the outside. For the past 15 years, I've been buying HP laptops and have never faced a problem earlier. Please find past images of the same thing.

  

  

  Product name: HP ENVY Sleekbook 6 PC (6 t-1100)

  @fishaqi

  Please use the Forum from HP Support. I brought your question to the team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display (numbers series and information).

  If you are not familiar with messaging private forum please click here to learn more.

  Thank you
  Omar

• HP envy m6 broken hinge problem

  Bought a hp envy m6 in December 2012 for 630 books and 18 months later hinge snaps completely off causing the surrounding cases break. HP will do nothing about it because it is outside the one year warranty. I am disgusted as many other hp HP customers are not repair these free laptops for many customers with the same problem. Because hp would not put this issue on the recall list customers are left with broken laptops. I am disgusted with the service the customer of hp on this issue and I would advice anyone looking to buy a hp want to not waste their money on one. I've always had less expensive brands of laptops that have certainly taken longer than this expensive hp one. Shame on hp for this poor customer service

  I just sent you a private message. If you are unsure how to check your messages from the forum, this post instructions of a..

• Laptop HP Envy M6: problem with hinges on the m6 HP Envy laptop

  I bought the laptop M6 Envy in 2014 for my daughter and it is now coming apart at the hinges of the normal level

  wear and back, she of afraid that if she continues to open & close it may collapse, but to use for school, please advise if there is a recall on this product or how can I fix it.

  @Alexenvy

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display personal information (serial numbers and information).
  
  
  
  If you are unfamiliar with the operation of the function of the Forum, private messages you can learn it all here.
  
  
  
  Thank you for visiting the Forum from HP Support.

• M7-j020dx Touch Smart 17 envy: left hinge problem m7-j020dx want.

  When I open the laptop now, the left back of the low box (below the left hinge) breaks down as the screen is high in a viewing position. I have to press the back of the left side of the bottom of the case and the top of the case to get the left rear of the closed box. When I drop the screen, the left rear of the case is falling apart and stay outside until the screen is closed. I am able to close the left rear of the case by pressing the up and down of the left rear of the case together. The right hinge and the back of the right side of the case do not have this problem. This problem started today. I have pictures smartphone that I can send if necessary. The notebook and the screen is operational. Just do not know what is happening with the left hinge to force the case apart on the back left side of the front panel.

  Hi @ BigBud350,

  Thank you for the HP's Support Forums. Best platform for all kinds of solutions, tips and settings for your questions/problems.

  For the best experience on HP forum, see our Guide to HP Forums to learn more.

  A problem with the hinges. Is this fair?

  Thank you for sharing the details of the problem. I want to help you.

  This forum is limited to software support only. I recommend that you reach phone support for any replacement of component using the link below.

  http://HP.care/2bjG4nE

  I hope this helps. Please update the State.

  Happy announcement.

  Resolv_S

  Happy to help you. I work for HP
  
  Please click on " ""Accept as Solution " " " if you feel my post solved your problem, it will help others find the solution.
  Click on the " Bravo Thumbs Up" " " to say 'Thank you' to help! "

• HP Envy 15t: 15 t broken hinge problem affecting current laptops?

  
  

  There is no way to know for sure, but the new 15t has a design to hinge significantly different than those that have caused so many problems. I'm too familiar with the faulty hinge issue and after watching the new design, I'd say it's a better. Hope that helps... and I hope even more that I'm not steering you wrong.

• Envy TouchSmart 17 laptop PC: left hinge problem

  Another piggyback. Same question. Have someone please contact me to start the process to resolve. Surprisingly disappointed. Expected better. Hoping that HP will redeem their reputation in my eyes with the service customer care exceeds my expectations. We'll see. Thanks in advance for your help.

  Hello @hastra,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I stumbled upon your post on the issue of the hinge and wanted to help!

  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!

• FORMIDABLE HINGE PROBLEM LIKE 6!

  OK it's finally happened, my wife opened the laptop this morning and surprise! the left hinge cracked and bent the housing of the display, leaving us unable to open or close the laptop. This is obviously a design flaw, I am an engineer in mechanics by trade, but I think everyone can see that the screw that holds the carter plastic on the screen with a thin metal reinforcing framework (which is now all too visible) would still give out at some point not to mention the fact that the load of the floating hinge is facing what opening and closing are too much.

  I'd appreciate it if someone from HP could let me know how they will solve this problem for me. It's a HP Envy 6-1010sa just turned 2 years old.

  Thanks george-p,.

  Jeff of HP has messaged me, I look forward to his solution

• 4 ultrabook split of irrelevant of envy hinged cover

  Hi, I have a HP Envy 4 Ultrabook that I bought a while back - was not a year yet. He was perfectly fine but today when I opened my screen, I heard a snapping or clicking noise and saw that my left hinge was slightly out of place, and the side of the lid broke up a bit and there is a small opening between the screen and the bezel cover. It does seem like a really important thing but my cover is quite risky, and when I do the split becomes wider. and I fear that my laptop my suffer even more. I would appricate any kind of help and also if someone knows if it is possible to fix my own or if I have to get it fixed and about how it would be. See you soon!

  I had the same problem with my desire to 6 t-1000. The left hinge is very loose, and when I opened my laptop, the frame surrounding the broken screen. Fortunately, after calling HP, it is covered by the warranty and if all goes well they can fix. I think that making the hinges was made at a great price.

• Power HP Envy 23 problem

  Hello

  I have a PC HP Envy touch 23

  He died and now does power back on.

  When you connect the power supply on the wall, the light on the power supply, but when you then plug in the back of the PC, the light turns off and the PC does not illuminate.

  I guess it's a motherboard problem, but I was wondering if anyone else has experienced this.

  Thanks in advance.

  Hope things are resolved.  It's always depressing when tech fails.