OfficeJet 6100 Wireless: default print to hp officejet 6100

Similar Questions

• Change the default print for all printing on OfficeJet Pro 8600 Plus

  OfficeJet Pro 8600 more

  10.8.3 OS iMac

  I want to change the value print factory set in the default print setting. I want the documents I send to the printer via AirPrint to print in black and white, not color. But the 8600 by default is always color. Sometimes, I am able to change this setting for individual tasks, but sometimes I can't. I wish that the default to be always in black and white. Is this possible?

  The steps above refer only to the Mac, indeed.

  AirPrint provides all color configurations, but only allow printing in color... all available Airprint parameters are listed in the What are the printing options are available? section below:

  http://support.HP.com/us-en/document/c02623193

  You can install the HP ePrint app and print through it, like black and white, know that color options are available for the types of documents only (PDF, TXT, MS Office files, Web sites or email), but not for the types of photo files:

  http://support.HP.com/us-en/document/c01923321

  Shlomi

• HP Officejet Pro X576dw: Wireless Direct Printing using the Lan cable

  Hello

  I buy HP Officejet Pro X576dw multifunctional on tomorrow. I understand that this printer has a direct wireless printing features that I can print from my tablet or IPad.

  But I doubt if this wireless direct printing can be done while the printer is connected to the network via Lan cable permanately IPV4.  This means I can print from my mobile phone at anytime via Wireless Direct without the Lan cable.  Kindly advice. Thanks in advance.

  David

  Oh, which means that you simply unplug the Direct SSID wireless and you should be able to print via your router LAN cable now.

• OfficeJet Pro 8600 - shortened default printing

  Re Officejet Pro 8600:

  How can I change the default 'Print shortcut' 'general impression every day"to make the default value, a different shortcut of my choice?

  ShadyCharacter,

  Thanks for the information. Yes, I understand that you want to change the default to be your new default "Everyday Printing", as opposed to change every time you print. I would like you take a look here and follow the steps for 'change the default for all print jobs print settings: changing the settings to print in Windows 7.

  I hope this helps!

  Thank you

• OfficeJet 6700 Premium error 0 x 00000709 cannot set the default printer

  I bought my new HP Officejet 6700 Premium on February 1, 2013. I use a HP Pavilion dm4 laptop under Windows 7 Home Premium. The installation seems to give no problem. However I'm unable to set the default printer and have the error message 0 x 00000709. Excel, Adobe, Outlook does not allow me to print.

  I spoke to the HP printer Department February 1st and they sent me some software of diagnosis which I sent back. I called again on 6 February and was told my problem was always open and they were trying to reproduce the problem (it appears on the net without a patch work). It is now February 10, and I hope the good people of HP to recall with a solution soon. You try to run a small business with no printer is not ideal.

  Someone at - it else ecountered this problem, and you have a solution.

  I ran HP utility, installed uninstalled the driver etc etc etc.

  I seem to have fixed the problem by changing in the registry keys. If HP wants a donation to charity, I would be happy to provide it to them :-)

• OfficeJet 8600: using "Send a Fax" in the companion printer into default printer changing to the fax printer

  Problem with the default printer, changing the Fax 8600 8600

  Windows 10 with the latest installation of the 8600 software

  This problem occurs in the printer Assistant software when you use "send a Fax".

  By clicking "Send a Fax" will cause my default printer change to the 8600 fax.

  I don't know how to change it in devices and printers, but hopes to fix the problem.

  Thanks for the reply.
  In fact, I found the solution. It was a setting of Windows 10.
  Apparently, 10 Windows will change the default printer to the printer last used (in this case, the printer named as the "fax" printer).
  To fix this, I went to:
  Beginning
  Parameters
  Devices of
  Printers, Scanners &
  and turned off the coast "Let Windows manage my default printer"

  This solves the problem. Coming from Windows 7 I wasn't aware of this setting.

• connect a HP D110 printer to my wireless network and can't seem to select the printer as the default printer.

  Original title: printer

  I am trying to connect a HP D110 printer to my wireless network and can't seem to select the printer as the default printer. Whenever I select the printer, the system out by default.

  Hello

  1. are you able to print correctly?

  2. were you able to set it as the default earlier?

  3 did you change on your computer before the show?

  4. you receive an error trying to set the default printer?

  Follow the steps mentioned below:

  Method 1:

  I recommend you to run the troubleshooter and update your printer drivers at the link below

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  If the problem persists, follow the following method:

  Method 2:

  Follow the manual mentioned in the link

  http://h10032.www1.HP.com/CTG/manual/c02106007.PDF

  For reference:

  Wireless & network

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=55119&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=4023246

• 709, the default printer error

  Hello!

  Windows 7 laptop Lenovo, Officejet 4500 connected by a LAN (not wireless) computer

  Test-Page work, works of Scanner, printer installed and working.

  Try to change the default printer to "Microsoft XPS Document Writer" to "HP508E0 (HP Officejet 4500 G510g-m)" using "Set as default printer" "Dvices and printer. Result: "operation could not be completed (error 0 x 00000709).» Double check the name of the printer and make sure that the printer is connected to the network. »

  The name of the printer that I cannot influence. So I can't see what to check.

  Printer prints, so I guess that the network connection is established.

  Watch HP Solution Center drivers etc are up to date.

  Windows troubleshooting utility suggests to set my default printer. But he also fails to do so without giving a reason.

  How to set my default printer HP4500?

  Thanks, best regards

  Michael

  Gordon!

  Thanks again for your efforts. Indeed, I managed to re - install printer drivers. And this time I had more luck, all three printers more XPS writer seems to work again. Unfortunately no change on the default printer, always RC = 0 x 709.

  While waiting for the installation procedure, I was searching Microsoft knowledge base and found one interesting article: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/unable-to-setup-default-printer-error-message/2e14443e-a829-4400-b155-5b87494b03ce?msgId=ab4e7395-e094-4205-91c3-7dfb644711bb&page=2

  Take care to proceed to the second page...

  The procedure described in this document has worked in my case: for each defined user to logon Windows I had to change an entry in the Windows registry manually:

  HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows

  Nota bene: first change the permissions for the key, and then change "Microsoft XPS Writer" to "HP Officejet 4500 G510g-m" in the value of the key field. All other parts of the field value has remained unchanged.

  The change is effective immediately, the default printer is now my HP4500. Test was successful!

  Well, I got the impression that this isn't a nuisance HP but a general limitation of Windows. From my experience, Linux and HPLIP seem much more convinient for the inexperienced user.

  See you soon

  Michael

• DEFAULT PRINTER SETTINGS

  Hi, I really hope that someone can help me.  I'm certainly not very informed on this stuff, but I know that I don't have this problem before updating my computer on Windows 8.1.  I do a lot of type of printing project before printing a finished product.  Then... I changed my settings to default print for "Black ink only" and "draft".  However, every time I start to print in MSWORD, MSEXCEL, MSPOWERPOINT; in fact one of my software applications, properties do not reflect the default settings I applied using Tune or when you access the printer through my control panel. I see that when I access the device, I show 2 printers to choose; both are the HP Officejet Pro 8600 premium but cited "USB", and the other quote 'Network' (of course, I do understand that either).  It's the 'Network' printer that will not save the changes.  If I am making any sense, can someone please help me?  I'll be very grateful.  Thanking you in advance, IM4GLTR1

  IM4GLTR1

  Your printer is connected via a USB cable from your computer to the printer?  Or... is it connected wireless to your router?

  Sounds like you or someone else have configured the printer to do both.  Select the correct printer in the control panel that reflects your configuration.  Try now.

• Why the Pages and Numbers do not use the default printer?

  Recently, I added a second printer to my home network and selected as the default printer. But when I try to print, the correct printer is selected in the dialog box print only part of the time and apparently depends on which application to print from. I believe that Safari, Mail, Contacts and calendar properly use the default printer, then the Pages and Numbers and instead do not the old printer unless I have change the selection in the dialog box impression every time I print.

  How can I get Pages and Numbers to correctly use the right default printer?

  The problem that is happening on my machine (OS X El Capitan 10.11.2, 5.6.1 Pages and numbers 3.6.1) and my wife (running Maverick 10.7.5, Pages ' 08 3.0.3 and Numbers ' 08 1.0.3) and has persisted through a reboot. The old printer is a HP OfficeJet Pro 8600, accessible via WiFi. The new printer is a Brother MFC-7340 connected by USB to a Time Capsule that is accessible via WiFi.

  In the print... dialog you select

  View the Presets...

  in the menu presets. In the sheet drops down, uncheck the box marked

  Reset the Menu Presets for "Default settings" after printing

  Click OK. Then select

  Last settings used

  or a custom preset that you created in the menu.

• Mac: How do I change the default printer by application

  Hello

  I use a HP OfficeJet 8600 and impossible to find a way to set the default print by application options. When I use my Windows machine he remembers the print by application settings (for example, if I print from Word, it prints the ordinary quality, if I select print in Photoshop, print quality Photo paper).  On the Mac (OS 10.8.5, Macbook Pro) I can't find any way to do it. If I put a print job in Word and the last used printer setting (from Photoshop) is Photo paper, then Word prints using this and uses a lot of ink and is incredibly slow.  Any help?

  Thank you...

  Hello again @winm!

  Thanks for the reply!

  I understand that when Windows printing software in memory settings for Word and Photoshop.  On the side of the things Mac, you will need to make the preset and choose it every time.  You may just be better to choose a quick project for Word and photo paper for Photoshop as you say.  The software in the Mac won't remember automatically.

• 5742 HPOficejet e-all-in-one: retain default printer Fax and Photo paper tray

  Hello.

  The printer keeps failing for FAX and paper in the photo tray.  How can I fix this in windows Vista?

  Hello @Vanessa3,

  Welcome to the Forums of HP Support!

  I understand that when you print from your Windows Vista-based computer to your HP Officejet 5742 e-all-in-one printer the screen 'Fax' is popping up and the incorrect paper tray / support is selected. I would like to help you today to address these issues. If the "Send faxes" window appears only when you print to a specific program, there is probably a setting must be adjusted under this specific programme. If this is the case, what program are you a victim of problems when printing?  If the 'Send of Fax' window is popping up under all programs that you print from your computer, it is likely that the wrong printer is selected as the default printer in the printers and devices window. Can I please you follow the steps below to fix this problem.

  Set the default printer:

  1. Click on the Start menu
  2. Select the devices and printers or Printers (you may need to access it via Control Panel)
  3. Under the Printers folder, locate your HP Officejet 5742 e-all-in-one. This printer should display a green check mark above to indicate that it is the default printer.
  4. If your Fax-HP Officejet 5742 e-all-in-one shows like check mark on this subject, please right click on HP Officejet 5742 e-all-in-one (printer) and left click on "default".

  Once the correct printer has been confirmed as the default printer please test print to confirm that the 'Fax' problem is solved.

  Once solve us the problem of Fax, we will be able to adjust your print settings to confirm that your printer is configured to print on the correct paper and with appropriate support tray.

  How to check the paper tray settings:

  1. Click on the Start menu
  2. Select the devices and printers or Printers (you may need to access it via Control Panel)
  3. Under the Printers folder, locate your HP Officejet 5742 e-all-in-one
  4. Right click on the HP Officejet
  5. Left click on Printing Preferences
  6. On the paper/quality tab, make sure that the Paper Source is set to main tray
  7. Also, ensure that the media is set on plain white paper (if that's what you print on)
  8. Click apply and OK
  9. Close the Printers folder
  10. Try to print a document to confirm that your HP Officejet prints from the correct tray.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• How to set default print mode instead of fax

  When I click on print from a Web page my hp officejet pro 8500 (A909a model) default Telec.   How can I set the default it goes always straight to the printing mode?  Any help appreciated.  Thank you

  Hello

  I understand it, please download HP print and scan doctor below link to set the default printer. You can also have this practice if you encounter printing problems in the future.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=OJ-106151-2&cc=us&DLC=en&LC=en&OS=228&product=3752456&sw_lang=

• The printer will not allow the default printer

  Adobe will not print file, said printer must be installed
  .  OfficeJet 6500 removed and reinstalled.  When installing the message says "cannot set as default printer".  Fix Microsoft, he says that he cannot solve the problem. Help, please.    Problem is recent.

  Hi Jerry93306,

  1. did you of recent changes on the computer?

  2. When you receive the error message?

  3. are you able to print using applications such as WordPad or Notepad Windows?

  4. what Microsoft fixit tool you have installed on the computer?

  See the link below and try the steps mentioned, if you get the error message when you print from Adobe applications.

  Error "you must install a printer.

  http://kb2.Adobe.com/CPS/409/kb409119.html

• Add Device sees wireless but printer is plugged and can reach the HTTP page on wire

  I installed my new 8000 Officejet Pro A809 with an ethernet but when I run the Wizard "Add Device" of HP, it trys to install as wireless even though I select wired and the installation fails.

  I can see the page http for the printer and it presents information healthy of mind on my printer, so I think that ethernet is currently working.

  I am running Windows XP with the FW off. The printer is on the same switch as my PC & of course, I can see the http page

  In the wizard, even if I choose ' Wired ' of course the wire works, page "Found network printers" shows that the connection is wireless. None-the-less I click next then a screen appears for "from Network Services" & it rolls well, topology, wireless services, etc., and sending a SLP request the IP address it fails & shows a picture of a wireless signal and a big red X.

  HP Home Network Diagnostic Utility says that software to connect to the network printer is missing, BUT I ran the wizard completely if a second time, I chose my camera wasn't online and it ended up OK. I ran the UPDATE of the utility & he did an update to security; I have rand again and he found none.

  Although my FW is off, I checked the ports that the FW Guide are necessary:

  I can telenet to the printer on port 9100 & 92200

  I can not telnet on port 137 139 or 427

  Ideas?
  Thank you!

  Larry Holt

  OK, plug the printer Ethernet cable must turn off wireless radio printer, but in the cases where it does not, click the button to light blue (or go to settings > network > turn off wireless on the front panel).

  Now, you don't have to bother with the add devices Wizard, we will just add it manually:

  Verify that you can access the web page internal to the printer by its IP address.  If you can not, disable firewall for your security system (not the Windows Firewall, it is usually not in the way).

  1. click on the 'Start' button--> printers and fax machines.
  2. under print jobs, click on "add a printer".
  3. click on 'Next' on the Add Printer Wizard window.
  4. Select "local printer attached to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
  5 under, select a Printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
  6. in the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
  7. under "Add Standard TCP/IP Printer Port" enter the IP address of the printer. Click 'Next' and then click 'Finish '.
  8. now select HP in the manufacturers list, select your printer in the list of the models of printers and click the button "next".
  9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
  10. Add the name of print spooler, and then click "next".
  11. click on "next".
  12. click on "Next" and "Finish."