OfficeJet 6500 709n all-in-one

After that download the drivers for the all-in-one, which is installed on a network (of two) with an ethernet cable connecting the printer to the router (NOT a computer), the installation is unable to complete, asking that the cable be connected to the computer.  I tried different remedies suggested but were not able to go beyond this point.  Help, please?

Hello

You can right click on hpiscnapp and click on Send on the desktop (as a shortcut).

When you want to analyze, you can click on the shortcut on your desktop.

Tags: HP Printers

Similar Questions

  • My Officejet 6500 E709 all in one will not print black.

    My HP Officejet 6500 E709n all-in-one will not print black.   All other colors work very well.  Have you tried what follows - new black cartridge installed, ran the print heads clean utility, made sure the wind was compatible black ink cartridge, turned printer off and restarted.  Print tests still not print black - other colors and images to print, but not text black or shades of black in images.  Any suggestions on how to fix or what needs to be repaired?  Thank you.

    Hi jim: I just had the same problem a few minutes ago. After having gone through all the troubleshooting steps, I realized it was all just a bad cartridge. The PIN on the printer heads were not reading the new cartridge, so nothing in black print could be printed. I installed a new black cartridge and I could resume my printing projects. I then contacted the HP store directly to report the faulty cartridge while they could send me a new, that I won't be out of pocket for a cartridge I bought directly from them.

    Hope this helps you with your problem.

  • HP Officejet 6500 Wireless all-in-One Printer - E709n does not print

    My HP Officejet 6500 Wireless only all-in-One does not print from my main computer. I can scan from this computer and print them from others. I uninstalled and reinstalled the software and drivers, restarted the queue, run the scan doctor and get error error unknown/deviece.  I have disabled the firewall unplugged abd and repluged the power to the printer.

    Any thoughts?

    I have messed with my firewall and had it work. Still not sure what I did but it resets something. Thanks for the help.

  • My iPad 2 can't find my 6500 709n all-in-one wireless.

    My 6500 all-in-in-one 709n works fine wirelessly with my computers of widows, but the ipad cannot find the printer. See the printer on my network and the ipad seems to have no communication problems with my network wi - fi. Any ideas?

    Hello

    Follow the steps below to find out how to get and use the HP ePrint home & Biz app:

    http://support.HP.com/us-en/document/c02775166

    Kind regards

    Shlomi

  • How can I reset my hp officejet 6500 e709n all-in-one

    Receive Fax failure, impossible to send or receive.

    Had this same problem a few months ago and HP support had me reset the printer to resolve the issue.

    Printer is no longer under warranty and I have not saved the info on how to reset the printer.

    Thank you.

    You always remember that you hold down the # and number buttons 6 on the printer to perform the reset that support the cat HP told you before?
  • HP Officejet 6500 Wireless all-in - One Printer - E709n - locked up

    I searched the Forum but could not find a solution to my problem.

    My printer is locked and does not go in mode 'sleep'.  The power button does not work and is still on.  I'm unable to print, but however I am able to receive faxes.  The only way I can cut off is by unplugging the power cord, but when he doesn't go to the top it gives me a warning about disconnecting that way may damage the printer and to use the power button and it hangs again.

    Help, please.

    Thank you

    •´`•. (*•.¸(`•.¸ ¸.•´)¸.•*).•´`•»
    «•´¨*•.¸¸. ADRIENNE. ¸¸. • * ¨• »
    «•´`•. (¸.•´(¸.•* *•.¸)`•.¸).•´`•»

    Reset the printer by holding the # and 6 keys while turning the power on.

    It sounds dead for me, but it may work.  If it isn't, try # and 9 keys.

  • HP printer OfficeJet 6500 E709a all-in-One series, fax is struggling to send, receive messages

    I just sent a message on the above topic, but I forgot to give my connection - what is AT & T DSL.  The "belonging to AT & T 2Wire box sits next to the printer.   I hope this helps!

    Thank you, again.

    Hi garden200,

    Can you run the fax Test and let me know if everyting goes?  See Solution 1.

  • Hi, I have a HP Officejet 6500 E709a all-in-one

    It has just stopped printing, running windows7 64 bit, is like his does not, and everything seems in order

    Hi Johnieb,

    This article can help you: print jobs are stuck in the print queue and printer offline

    I hope it works for you!

  • I'm trying to print via wifi from my IPad to a 709n 6500 printer all in one

    I downloaded the HP sprint app on my I Pad, but it does not see my wireless 6500 printer 709n all-in-one. The HP web page indicates that the printer is compatible. Thank you

    We will set an IP address of the printer:

    -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
    -Enter the IP address in a browser to reveal the internal settings of the printer.
    -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
    -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you don't know what this range, change the last digits of the IP address of the printer after the last '.' to 250
    -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
    -Enter the IP of your router (on the Page of the Network Config) for the bridge and the first DNS. Let the second white.
    -Click 'apply '.

    Now, stop the router and printer, start the router, wait, and then start printing.

    After that, you will have to redo 'Add printer' using the new IP address.

  • OfficeJet Pro 8600 all-in-One connected as network printer loses connection

    In December 2011, I bought a HP Officejet Pro 8600 all-in-One to replace an Officejet 6500 as my network printer home. The 6500 worked very well on my cable, but his screen did not, I tried some of the features offered by the 8600 and I got a good price on a new warehouse of BJ. I have the 8600 connected via ethernet (not wireless), with a static IP address. All my computers on the network are running Windows XP Pro SP3 and are up-to-date with Microsoft updates. However, from one day to the next my 8600 will lose connectivity scan (Scan of the computer shows it as being disabled on all my computers at the same time, and I can't reconnect), and if I do not have anything he'll (as in a few hours) also lose connectivity impression. The only way to restore connectivity is to uninstall the HP Officejet Pro 8600 device software basis of all computers, and then reinstall the printer. I had a phone conversation and two debates with HP Technical Support; They suggested that the problem is in the firewall on the computers (but if that were the case I don't think that the loss of connectivity would occur on all computers at the same time), the IP address setting (doesn't make sense) and the printer driver is not not the latest version. I tried all the suggestions, and none of them have solved the problem. The last counselor "has raised the issue to the next level", which proved to be a Manager with no technical expertise and his only suggestion was that I have to return the printer to the merchant. I think the problem is the firmware in the printer (which, according to the 'update' on the printer option, is the latest version). Any other suggestions or experience?

    After a lot of research and find the settings that I did not know that Windows XP offered, I found that the following appear to have solved the problem I've known - at least the printer is now operational for more than 48 hours without losing printing or scan connection. Here are the steps I used:

    1. Start Control Panel  connections network and Internet

    2. Choose "network connections."

    3. Right click on "connect to the Local network.

    4. Choose "Properties".

    5. In the top window is the name of the Ethernet computer connection port, select "Configure" next to this window

    6. Select the tab labeled 'Power Management'

    7. Uncheck the box "allow the computer to turn off this device to save power".

    8. Select the "Advanced" tab

    9. Select the entry "power saving Mode".

    10. If this entry is set to change 'On' to 'Off '.

    11. Select 'OK', and then close the windows that were opened

  • HP officejet 6978 all in a single p: hp officejet 6978 printer all in one, appearing to create its own wifi signal

    After I had my printer connected and working properly, I looked in my wireless options to connect to the internet. I have hooked the fine, but in these choices, was a connection option in/with? a hp officejet 6978 printer all-in-one. Before you buy and hanging upwards, connect this option was not there. Now, this is the case and showing a stronger than my router signal. This printer is able to be a wifi connection? Any ideas?

    That's great. I see nothing in the instructions, and the seller does not mention either. It seems to me that this feature would be another selling point. I do not necessarily want to disable it. I like the idea of having him as a backup, if my current one falls down, would only be an option? If so, I tried to connect using pw of my router, but cannot connect. This would have a default PW? is so, how do I find it. So thanks for your help. As I said nothing even alluded to this function...

  • OfficeJet Pro 6978 all-in-one: OfficeJet Pro 6978 / will not download drivers

    I just bought this printer Office Jet Pro 6978, All In One Printer.  It won't let me download the driver listed in the steps to implement, it fails every time.  I tried to use the CD that came with it, it gave me a message "this computer's operating system is not supported."   So this printer will not work on my 64-bit?  Or elsewhere?  My computer is a HP.  Where can I find a download driver for this printer for my operating system?  When it prints, it prints a nonsense.  % beginprolog % beginresource: file and so on with such things.  I am at a loss... Any help would be great.

    Hello

    Sorry, but the printer is not supported on Windows Vista 64-bit.

    64-bit support is only available in Windows 7 or later operating systems.

    You can find the printer specs below:

    Vista 64-bit is not supported.

    http://support.HP.com/us-en/product/HP-OfficeJet-Pro-6970-all-in-one-printer-series/8289585/model/11161264/document/c05061732/

    You must upgrade your operating system to a later version to use instead an OS 64 - bit, Windows Vista 32 - bit to insall or replace it with another printer, compatible with your operating system.

    Respect,

    Shlomi

  • HP Officejet 4635 e-all-in-one printer prints multi-page document

    Hello, I have a HP Officejet 4635 e-all-in-one printer and can't print a multiple page document. The printer will print all except the two or three first pages, stopping in the middle of the last page it is printing, and then ejected from the page, usually with the third print top. At this point, I get an error message on my computer screen that says: "cannot print from xxxxdocument. I can go back into the print menu and select the pages that are not print and manually fill the work, but which requires sometimes two or three attempts, that the printer stops again impression after two or three pages.

    My operating system is Windows 8, the printer is connected to my wireless router which is on the same floor, the printer is connected directly to the wall outlet. I met this problem until print 28.0 Firefox, Microsoft Word, and Microsoft Excel. The documents included diagrams, sheets of computing, graphics and text. Oddly enough, I think I'm able to print several pages (of least until 4 on my last attempt) of Microsoft Office Picture Manager.

    I have no page unique impression of difficulties from the browser or any installed program and am able to print from my devices android as well, although I still have to try multiple pages printing app. The problem seems to occur more often if I try to print more than two pages.

    I searched on the Web site, looked through the installation of printer troubleshooting, including the instructions under "step 3: If your printer is connected to your wireless router, but you can't print (or scan). Nothing I've tried has helped him.

    I wish I had a solution to this problem.

    Thank you very much.

    Helen Marie Kennedy

    Have you tried full install driver software?  OJ4630_188.exe

    Exit the: 08-04-2014

  • Install HP Officejet 6310, printer all in one

    I loaded and began to run the instalation of the complete software for the HP Officejet 6310 printer all-in-one on my new Dell Inspiron N7110 Notebooks. It runs Windows 7-64 bit. After the end of the excerpt, it stops just running. It should go in the installation process, but it doesn't. Can someone help me?

    See if you can find the folder of extraction of HP that he created, then run the installer in there.

  • HP Officejet 5746 e-all-in-one: HOW to connect android phone randomly to print the data of the phone?

    I have Macbook & Office XP connected to the printer (HP Officejet 5746 e-all-in-one printer) necessary to connect Random cell phones to print the data.  All directions?  TIA Doc

    You need a wireless setup to print from Android phones.

    Please see this link for mobile printing options available:

    http://www.HP.com/go/mobileprinting/

    WyreNut

Maybe you are looking for

  • Support for Satellite 5200 801 2 GB SD card

    Is it likely to be a produced pilot to add support for memory 2 GB on the Satellite 5200 801 SD cards, or is a hardware limitation? Ian.

  • Computer laptop 15-f039wm: not fan not turn only at starup seconds, laptop is NEW

    I recently got a laptop Hp 15-f039wm. I saw on the updates of the site of support for the many more advanced BIOS, which brings the plant and downloaded and upgraded. Now the microphone fan runs only a few moments to turn on and no more runs to reach

  • DesignJet 1050c more Electronics Module Test

    Hello, all. A few weeks ago, we replaced the belt on our more tracer 1050c DesignJet.  After restarting the printer, he would end the scan of the axis.  Did a bit of reading and greasing and decided to try again today.  Today, it is said that there i

  • LPD print server XP disk requirement

    All, I have a simple question. When you install the LPR (Unix Printing) service some machines require an xp installation cd, and others do not. I just want to know what causes this distinction, if there is a way to collect the files needed for situat

  • Windows Update error Code 800703EE

    Salvation;  I have tried for more than a week to install the update for Windows Vista for x 64-based systems (KB972145) such as recommended by the alert update and for some reason, I get error code 800703EE.  I tried to solve the problems without res