My iPad 2 can't find my 6500 709n all-in-one wireless.

Similar Questions

• My iPad 2 can't find my printer deskjet 3050 J610 series wireless

  Hello. My iPad 2 can't find my printer deskjet 3050 J610 series wireless. Can I do anything to make it work?

  According to the list of compatible wireless Apple printers, support is the deskjet 3050 a. j611a is there something I can do? Some driver?

  Thanks for your help

  The Deskjet 3050 isn't compatible Airprint as mentioned above.

  In order to print wireless from your iPad, you need to use the HP ePrint home & Biz application:

  http://support.HP.com/us-en/document/c02775166

  Kind regards

  Shlomi

• 6500 printer all-in-one wireless

  I am a 73 year old who has learned to use a computer later than most. I know not enough for operating a computer, but I am not a technician. I bought a 6500 all in one wireless and worked with her for two weeks and could never make it work so I took it back. I love what did the printer, if only I could get it to work properly. I don't know that I'm the problem and not the mechanism.

  When I loaded the software on two computers, they would work wirless, but the bureau which has been connected to the router does not recognize the printer. After that all efforts exausted the mistake of reinstalling software would be developed. If I used the usb cable to load the software into the computer connected to the router, it would work, but the wireless would not work. Same error message. After thinking about this topic, I think I told the installer to use the usb cable in the router computer which clogged to the top of the installation wireless for the other two and the opposite for the spoiled wireless units a cable installation. I never tried plugging the eithernet cable.

  I would like to start again and see if I can feel comfortable to install. If so, I'll go and rebuy to the printer.

  My situation: I have a desktop Dell that is connected through router a BEFW 11 S 4 Linksys. My incoming signal is provided by Charter Communications cable. I have another unit of Dell desktop at home and a laptop that I want to connect wireless.

  Question: Can I connect the printer directly to the router with an eithernet cable and run the other two wireless units? I learned by a sales person (after that I came back from the printer) that if I simply connected the printer to the router thur the eithernet port it would be on my network and the Bureau recognise. Then the other two computers would connect wirelessly.

  Had no answers. Did you get any help. The printer took over and my money back. The pain is useless. Thank you very much.

• Where can I find software for e-all-in-one HP Photosmart C310 series Mac OSX Lion v.10.7?

  I bought the printer HP Photosmart Premium e-all-in-one C310 series yesterday night and desperately need to print today.  However, the installation disc is not supported by my Mac happening on v10.7 Lion OSX.   I read on a site that I should be able to access a software upgrade via the Apple website, but could not find the last night.  Help, please!

  Also, I loved the easy set-up using the touch screen and my wireless mode.  No cables needed!   Now, if I can get any software updated today, that will be great!

  Kelly

  Your printer works perfectly in Leo.  Indeed, pilots are probably aready in your operating system.  Get the installation program and be able to use it.  We have a doc that will guide you through the process.  (It's pretty simple)  OS X 10.7 Lion: install and use the printer with Lion

• OfficeJet 6500 709n all-in-one

  After that download the drivers for the all-in-one, which is installed on a network (of two) with an ethernet cable connecting the printer to the router (NOT a computer), the installation is unable to complete, asking that the cable be connected to the computer.  I tried different remedies suggested but were not able to go beyond this point.  Help, please?

  Hello

  You can right click on hpiscnapp and click on Send on the desktop (as a shortcut).

  When you want to analyze, you can click on the shortcut on your desktop.

• How can I print to hp photosmart all-in-one ipad 7280

  How can I print to hp photosmart all-in-one ipad 7280

  Hello

  But the C7280 is not active AirPrint, you can still print via the local network using HP ePrint mobile app.

  You can find the steps to get and use the application in the following document:

  http://support.HP.com/us-en/document/c02775166

• I suspect someone is using my key synchronization. Where can I find a list of all my devices registered on sync?

  I store my sync on my USB key, and I suspect that someone else could find it. Where can I find a list of all the devices I have currently recorded on sync?

  Hello

  You can find this information in "Tabs on other computers" in the menu of your history.

• I can't find the function "bookmark all tabs" in Firefox 5 used to be there. He moved or just removed?

  I can't find the function "bookmark all tabs" in Firefox 5 used to be there. He moved or just removed?

  You can also right click on a tab to see this menu item.

• where can I find the security code to access my wireless network

  security key

  where can I find the security code to access my wireless network.

  Hello

  Check with the manufacturer of the router's support and most have forums and excellent documentation online.
  You should be able to access the router to set a new SSID and password if necessary.

  You must know the SSID (name of the router) and the password.

  If you do not know these you can find in the running on the WiFi system now with this
  free tool. This is not a crack, it should be run on a local computer that has access (or access)
  to your router. Sure, the information will not be there if Windows was reinstalled or information
  has been deleted otherwise.

  -FREE - WirelessKeyView recovers all the wireless network security keys/passwords (WEP/WPA) stored
  in your computer by the service 'Wireless Zero Configuration' of Windows XP and by the 'autoconfiguration WLAN service.
  service of Windows Vista. It allows you to easily save all keys to text/html/XML, or copy a single key to the
  Clipboard. (Works on XP, Vista or Windows 7).
  http://www.NirSoft.NET/utils/wireless_key.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I'm trying to print via wifi from my IPad to a 709n 6500 printer all in one

  I downloaded the HP sprint app on my I Pad, but it does not see my wireless 6500 printer 709n all-in-one. The HP web page indicates that the printer is compatible. Thank you

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you don't know what this range, change the last digits of the IP address of the printer after the last '.' to 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the bridge and the first DNS. Let the second white.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• I can't receive faxes on my all-in-one HP Photosmart 3100

  I recently installed Windows 7 32 bit. Now I can't receive faxes on my all-in-one HP Photosmart 3100

  Hello Travis_C,

  I managed to fix this problem in all things, read the manual. It seems that the automatic response was some how turned 'OFF' and this is why no faxes received. Thanks for your reply,

  See you soon

  BJP1

• My Officejet 6500 E709 all in one will not print black.

  My HP Officejet 6500 E709n all-in-one will not print black.   All other colors work very well.  Have you tried what follows - new black cartridge installed, ran the print heads clean utility, made sure the wind was compatible black ink cartridge, turned printer off and restarted.  Print tests still not print black - other colors and images to print, but not text black or shades of black in images.  Any suggestions on how to fix or what needs to be repaired?  Thank you.

  Hi jim: I just had the same problem a few minutes ago. After having gone through all the troubleshooting steps, I realized it was all just a bad cartridge. The PIN on the printer heads were not reading the new cartridge, so nothing in black print could be printed. I installed a new black cartridge and I could resume my printing projects. I then contacted the HP store directly to report the faulty cartridge while they could send me a new, that I won't be out of pocket for a cartridge I bought directly from them.

  Hope this helps you with your problem.

• can not install the software for all in one photosmart 2610xi of disc of windows 7 pc

  I can't install the software for all in one photosmart 2610xi of disc of windows 7 pc.  Goes so far then stops and says cannot use the command "run as".  I am the administrator and logged as such.  I would like to use the software provided with to send faxes and others.  I can use the printer since the buttons on the printer and it prints from all programs... I just wanted to use this software.  Any suggestions?

  Thank you

  Hello

  The installation disk supplied with the printer is not compatible with Windows 7, as the device was manufactured prior to release of Windows 7.
  No matter which compatible OS are registered on the CD...

  A newer version of the software for Windows 7 can be downloaded from the HP site.

  Before installing the software, be sure to follow the steps below:

  1. Enter the control panel > devices and printers.
  2. Right-click on the icon Photosmart 2610 and lick to withdraw an instrument.
  3. Disconnect the USB cable between the printer and restart your PC.
  4. Follow the below installation, do not connect USB until prompted to do so during the installation of the software:
     http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76831-1&cc=us&DLC=en&LC=en&OS=4062&product=421134&sw_lang=

  Kind regards

  Shlomi

• OfficeJet 6600: iPad suddenly can not find wireless HP printer.

  iPad, suddenly cannot find a working HP officejet wireless printer!  He worked recently.

  Hey @dburbage,

  Welcome to the Forum from HP Support.  I understand that you are unable to print from the iPad using your HP Officejet 6600 e-all-in-one printer.  I want to help you with this and can have steps that you need to restore this functionality.  What you describe, it seems that you use AirPrint.  I will answer my advice for this type of installation, but if you use ePrint, please let me know and I'll give the information you need.

  You have confirmed that your printer is connected to your wireless network?  Button on the front panel of the printer the wireless icon and make sure that it is connected and displays an IP address.  If this isn't the case, run the Wireless Setup Wizard to restore connectivity.  If you are connected, powercycle your equipment as explained below:

  1. Unplug your modem/router
  2. Turn off your printer and your iPad
  3. Wait 60 seconds
  4. Plug in your modem/router back in and wait that he reconnect to internet
  5. Turn on your printer and once it starts up as normal, confirm that it is still connected to your wireless network
  6. Turn on your iPad

  After completing these steps, you are able to connect your printer with the iPad?  Please let me know the result of your troubleshooting by responding to this post.

  Have a great day!

• I am told that my 6500 a - all-in-one - can't print on both sides of the paper. Is this true?

  I just replaced an old HP 840C with the 6500 has and can not find a way to make 2 sided.  After 1 1/2 hours on 'live chat', I was told that this model can not do this.  If so, it is totally amazing and will result in my black-Linting total of HP products in the future.

  Is anyone aware of this?

  Gerald D Schrag

  pajer1a wrote:

  Hi Bob - after almost a year, I'm finally back with the same problem-no duplex option.  Did you ever find another driver that works on the 6500c and will offer the duplex option?

  Jerry

  Sorry Jerry, I was never able to get copy double-sided working on the Officejet 6500.  It seems that the firmware of this device does not print duplex commands, even if supported a driver that supports duplex printing is used and a duplexer is attached.