OfficeJet 6600: flashing of the indicator wireless.

Similar Questions

• HP Officejet 6600 Guard giving the message there is a problem with the printer or the ink

  HP Officejet 6600 Guard giving the message there is a problem with the printer or ink. We have already tried to turn off then, have you tried unpluging and nothing works

  OK so I solved my problem normally my printer tells me what was low on ink im although there no and homesick, that I had to replace an ink catrige and his works now

• OfficeJet 6600 connects to the wifi network

  Hello

  I bought an Officejet 6600 and effortlessly connected to my wifi network, print and scan for a day. And there are two days that he stopped conntecting to the wifi network. In the meantime, our router turned off and turned back on. That's the only difference.

  First of all, the printer would not even detect the wifi network. I solved that by changing the configuration of the router (Cisco 3925 EPC) and passed under the Setup wireless "Wi - Fi protected setup" to "manual". I can now see the network on the printer again.

  But after that I've selected my wifi network and enter the WPA password, the printer tells me that the network connection is impossible. I printed a page of diagnosis, which told me that the problem is perhaps related to the MAC filter. But I have no MAC filters. I also tried to pass of WPA/WPA2 to WPA only, but that doesn't change anything.

  I also tried to set the mode wireless via the USB cable, but no avail. Everything seems to work, until the moment when he tries to connect to the wifi (screen with 'configuration' with the large antenna and pulses of radio waves).

  Should I give up and bring it to the store? I'm getting desperate!

  Thanks for your help in advance,

  Raphaël

  OK, to make sure I understand - the printer connects effectively to your wireless network, and well it works for a while once the printer goes to sleep, your computer or router may not wake.

  If this is the case there are a few things that we can try:

  1. in the settings of your router, make sure that the multicast is enabled.

  2. set the 2.4 GHz router to 11 channels.  I know it sounds weird, but please try.

  3. set an IP address of the printer:
  
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.
  
  Now, stop the router and printer, start the router, wait, and then start printing.

• HP Officejet 6600: problem with the printer or ink system

  I have a HP Officejet 6600. I replaced the black cartridge with a new HP black ink cartridge. This message keeps poping up, there is a problem with the printer or ink system. Turn the printer off, then on. If the problem persists, contact HP. It gives me as two solutions. Solution 1: Reset the product. Turn the product off, and then unplug the power cord. Plug in the power cord and then press the key to activate the product. I've done this three times. Second solution: contact HP support note the error code provided in the email (I looked and it does not give me one) then he says, supported to contact Hp. go to: www.hp.com/support. Needless to say that this message keeps appearing on the screen of the printer and I can't do anything with the printer. Can anyone help with an idea? Please, I beg you.

  Hey @popcorn101,

  Welcome to the Forums of HP Support!

  I understand that you get the error "printer failure: there is a problem with the printer or ink system' on the front panel of your HP Officejet 6600 e-all-in-one printer.". Thanks for the troubleshooting steps that you received before reaching out for support, including. Right now, you have completed all the troubleshooting steps available in your efforts to solve this error in accordance with the document of support here. The failure itself is probably due to a failure of the print head. The print head is the part that the cartridges will fit. It controls the "reading" of the cartridges and put the ink on the page. If the print head does not, then the printing within your product system has failed. In this model of printer print head is a non-replaceable. Therefore, the resolution is a replacement of the entire unit.

  I highly recommend at this stage that you contact our Technical Support telephone queue for discover hardware replacement options.

  HP technical support are available by clicking on the following link:

  Contact HP support

  (1) once the page opens, please select the country in which you are located. Then, enter your HP model number on the right.

  (2) choose the 'Contact Support' tab at the top and scroll down to the bottom of the page "HP Support - contact" to fill out the form with your details.

  (3) Once finished, click on the 'Show the Options' icon in the lower right.

  (4) Finally, scroll to the bottom of the page and select 'phone number.' A file number and telephone number will now fill for you.

  I wish you good luck going forward with this!

• OfficeJet 6600 e-all-in-one: Wireless connectivity with the new router problem

  We had the printer since 12 months, workin with no problems.

  Just got a new modem/router (NETGEAR V7610) installed as part of the NBN implementation and I can't get the printer to connect to the new router. 5 and 2.4 G active networks. The two defined newtorks on security WPA2-PSK [AES].

  The printer detects the wireless (2. 4 g) network, but can't coplete the connection. Tried the two direct input the network key and using WMA.

  -The display panel shows "wireless invalid password (WPA) is entered.

  -The results of network printer test page indicates a FAILURE on safety.

  I was able to connect to multiple other devices (laptop, iphone, Kindle...) without any problem. Used the two direct entry of the key network and WMA.

  Anything else I can try?

  Find a new update of the firmware for the printer (May 9, 2016).

  After you apply the update, the printer is able to connect to the new modem.

• OfficeJet 4630 - by typing the password wireless

  Can someone please tell me how to key in a passwork of capitals and numbers into the printer.  I can't find a way to do this.  everything happens in small letters.  I would really appreciate the help.

  Barbara

  Hello @bjallen929,

  Thank you for visiting the Forums from the HP Support! I see that you are trying to enter the password for your network on your HP Officejet 4630 wireless. In order to get a capital letter, you have to keep hitting the number until it crosses the lower case and then the capitals.

  Think of it as the old school SMS, T9 text. If you need a D Capital, keep typing the number 3, until you get the injector appropriate.

  I hope this helps.

  If you need additional information, let me know.

• OfficeJet 6700 flashes under the scanner cover

  The light continues to blink when the lid is down on the scanner. Is this normal? The sales representative at the store said it should not. It seemed that it was not in the store, so I exchanged for a new one, but when I traded my printer, it did the same thing.

  No problem. HP printers are pretty good with make you aware of any problems with the device. If you had a problem with the printer, you know an error on the front panel.

  Remember if you find one of my post useful or want to say thanks don't forget to click the White Star under my name to give me congratulations.

• OfficeJet 6600/problem with the vertical line that appears both scanned and copied items

  There is a vertical line that follows the entire length of a page when I scan or copy.  Have cleaned the glass, it is not the effect.  Help

  Hi gljatlaw,

  I see that you are having problems of quality of scan.  I'll take a look at the document below.

  Scan quality

  Let me know how it goes.

• Satellite L850 - indicator wireless is not off

  Hello

  I have the Satellite L850
  Windows® 7 Home Premium 64-bit (pre-installed, Toshiba-HDD recovery)

  When I switch the lan wireless off (using f12)

  the indicator doesn't turn off wireless!

  I have not found "the indicator wireless settings" on my system!

  any help please

  Thanks in advance

  Some models are delivered with Win8. Can you please send the exact model number? I just want to check the specification.

  Anyway, if you have Win7 when you press F12 can you see at the top of the screen flash cards?
  When you press FN + F12 you see option ON / OFF for the WLAN?

  Somehow, this question is strange to me. When you use the laptop with the settings, it should work properly.

• HP Officejet 6600: Error in HP Officejet 6600 paper

  OfficeJet showing without paper loaded when the tray has a lot of paper in it. Have tried cleaning the rollers, but made no difference.

  Welcome to the HP Forums @hopuldey,

  I came across your post on your Officejet 6600 not detect the paper in the tray and advise you to load paper and wanted to tender hand with my own suggestions.

  Check out the guide below and try the steps in order. If the error persists, contact HP to discuss a replacement.

  Tip: Make sure that the printer is plugged directly into a wall outlet, avoiding bars power and surge protectors.

  • An "out of paper" Message appears and the printer is not Pick Up or paper source

  If you have trouble with the steps, let me know and I'll do my best to help.
  
  Click the thumbs below up to say 'Thank you' and 'Accept as Solution' if the problem has been resolved it please and thank you!
  
  All the best,
  
  Contact HP:
  
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• HP Officejet 6600 copy function - output offdset

  E-all-in-one printer, HP Officejet 6600 range

  The print function works fine.

  When you use the copy function, the image is moved to the top about an inch.

  Otherwise, the top inch of the page of the original is missing and there is an inch of white space at the bottom.

  Sorry,

  At took the second back to BestBuy. Referred and got an Epson WF-2540 and an $80 store credit.  I'm sorry. Closing this thead OK?

• HP Officejet 6600: HP 6600 fax answer long distance calls; worked very well.

  My HP Officejet 6600 suddenly uses the fax to answer long distance calls. This can happen because I had lost power. Wiring has not changed. Local and answering calls work very well.

  Hey @bunny352 ,

  Thanks for joining us on the HP Forums today, hope you enjoy your time with us!

  So, my name is Zac and I'll be your HP 1 to 1 support agent today! I understand that you are running a really interesting question where your fax will pick up calls telephone long distances but works fine otherwise. I would like for you to check a number of things for me.

  1 make sure your distinctive ring is set to all rings.

  2. make sure auto response is 'On '.

  3 Let me know how many rings you need to your answering machine pick up. (Make sure that your fax, 2 rings is later)

  Please get back to me with this information and if you need help to find it also made me know what it is you need to find and I'll help you with that too. Can't wait to hear back on your part! Have a great day and wonderful / safe from holidays!

• Try to print, PC says he'll send an Officejet 6600 fax

  My HP Officejet 6600, which I had to reinstall because of a connection problem, calles herself now FAX HP Officejet of the 6600 in the PC.

  No way to print. My PC is a HP Pavilion h8-1030be. He continues to ask for a fax number.

  No idea how to set up the printer on the PC, in order to print when I want for that.

  In any case, I will try now to restart the PC and see what happens.

  Best regards

  Thanks for the update, Paul.

  It seems that the installation did not properly this time and I advise to remove the printer software.

  • Click on the start menu in the PC
  • Click on all programs
  • Open the HP folder
  • Open the folder for the Officejet 6600
  • Click the uninstall option
  • Once the uninstall is complete, the program will disappear.
  • Click on the start menu in the PC again
  • Click on devices and printers
  • Remove the 6600 if she is always present
  • Select any remaining printer by clicking once to the left
  • At the top of the window, click Print Server properties
  • Click the tab drivers
  • Delete lists of the Officejet 6600

  Once the printer is deleted, then re-install with the latest drivers from the HP website.  To access the downloads page for the 6600 click on the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-108845-3&cc=us&DLC=en&LC=en&OS=4063&product=5304873&sw_lang=

  This returns the printer to normal functionality?

• "HP printer Assistant" for HP Officejet 6600 WON 'T run.

  Windows 7 64 bit

  NO error message

  NO changes to the system until after it started then improved then just put update HP firmware

  It worked yesterday.  When you have selected the "HP OfficeJet 6600" desktop on the desktop shortcut, he ran a sreen which allowed you to print, scan, fax, showed levels of ink, etc.

  Now: he comes up with a window of 'Control Panel\Hardware and Sound\Devices and Printers\HP Officejet 6600' that offers you 4 choices and the one that seems to offer printing/scanning, IE. "HP printer aSsistant"... which has no effect when you select.

  IF you right click on "HP printer Assistant" on this screen, it gives you the possibility to make a shortcut.  The shortcut created and has properties where the 'target' is never developed so that you can not even say that he's not trying to run.

  Upgrading of the Roque?

  

  Hello world!

  I called customer service and talked to a nice girl named Stephanie.  She was very helpful and tried exactly the same things I did the week last with the same results...  However, I decided to do another printer to the printer from my last more (410).

  I sincerely advise guys to call directly, and your product is new, you will get a very good support and give advice on what to do.

  We get a new printer and expect us it to work and HP understands that - simply call and your problems are more likely to be resolved here.

  Guys good luck and I hope I never come back on this forum (I got a 2 year warranty on my new printer for $ 1)...

  Ciao!

  Suzie

• OfficeJet 6600: iPad suddenly can not find wireless HP printer.

  iPad, suddenly cannot find a working HP officejet wireless printer!  He worked recently.

  Hey @dburbage,

  Welcome to the Forum from HP Support.  I understand that you are unable to print from the iPad using your HP Officejet 6600 e-all-in-one printer.  I want to help you with this and can have steps that you need to restore this functionality.  What you describe, it seems that you use AirPrint.  I will answer my advice for this type of installation, but if you use ePrint, please let me know and I'll give the information you need.

  You have confirmed that your printer is connected to your wireless network?  Button on the front panel of the printer the wireless icon and make sure that it is connected and displays an IP address.  If this isn't the case, run the Wireless Setup Wizard to restore connectivity.  If you are connected, powercycle your equipment as explained below:

  1. Unplug your modem/router
  2. Turn off your printer and your iPad
  3. Wait 60 seconds
  4. Plug in your modem/router back in and wait that he reconnect to internet
  5. Turn on your printer and once it starts up as normal, confirm that it is still connected to your wireless network
  6. Turn on your iPad

  After completing these steps, you are able to connect your printer with the iPad?  Please let me know the result of your troubleshooting by responding to this post.

  Have a great day!