OfficeJet 4630 - by typing the password wireless

Similar Questions

• OfficeJet J4680 does not recognize the password wireless

  Hello!

  Our wireless printer is grateful is no longer the password wireless. It will print if connected via FireWire/USB and it does not recognize the network, but he thinks that the password is wrong. There is no Ethernet port, so I can't connect it to the modem or the router to see if it would work like this. I restarted the modem, the router and the printer, but nothing seems to work. The password is correct. What can I do else?

  Sharron

  Nevermind - I went stupid but now solved the problem.

• How to customize the password wireless live?

  I have a Photosmart 7520 printer connected wireless to a hp Pavilion via. Verizon 4 G LTE Jetpack and a Linksys N900 USB adapter.  My printer has recognized and connected successfully to the Jetpack; Menu Direct wireless reads "On(With Security)".  A print to reading 'No' in the WPS column discovered networks.  I tried to customize my password and make it safe (if I need it, I don't know).  I printed the Page of Configuration of HP network, located my URL (s) for the built-in Web server, but when I typed in my web browser I had no connection made.  For example, I entered with no. http//:192.168.1.101. in the end, no .com, www., I can't understand it.  Is it OK like this as 'On(With Security)' or do I need other security measures?  How I use a MI-Fi is different router ethernet connected as far as the above is concerned?  I'd appreciate any effort of someone to help me to better understand and address this problem.  Thank you.

  The password wireless live, I wouldn't worry too much.  Together wireless makes live is to act as an ad-hoc connection that turns off itself and can connect to multiple devices at once.  It makes the printer spread it's own separate network.  If someone connects to this network, the worst they could do is print on your printer.  With the help of a MiFi HotSpot can cause problems in a good wireless environment.  They function as a cell phone, so they are connected permanently and reconnection to different cell towers that tower sends the signal strongest at the time.  This can cause the DHCP HotSpot constantly reallocate IP different addresses to devices on the network.  This may cause the computer to be unable to see the printer.  I suggest you set a static IP address on the printer to prevent that to happen very offten.  The best solution is to use a standard router with a standard internet connection, but I understand that this is not always an option.

  Step 6 in the present document will tell you how to set a static IP address: http://support.hp.com/us-en/document/c02817031
  When it askes for the DNS information, enter in Google DNS. Preferred DNS = DNS Alt = 8.8.4.4 8.8.8.8

• OfficeJet Pro 8600 Plus: loss of wireless connection, printer does not accept the password wireless

  My printer has suddenly lost its wifi connection. It's the only phone connected to my network to do so.

  Through the Wireless Setup Wizard to restore the connection. Assistant tells me that I entered an invalid password wireless, that is not true. (I confirmed that all devices connected to the network using the same password).

  Reset the router (Technicolor of Time Warner). Reset the printer. The 'Restore default network' done. No luck.

  Zero has changed since yesterday, when my printer was working fine. I used the same router for months, do not change any settings. Any thoughts on what may be the issue? A bad update happen?

  Thanks in advance.

  My apologies for the late reply. I managed to get this problem resolved by phone to customer service.

  The security mode of the router had to be changed to 64 WEP for wireless connection to be restored. According to Support HP, it's a common problem with the routers in Technicolor. There was no explanation as to why the printer has suddenly lost the ability to connect wirelessly when safety was created to WPA2-PSK. The network has been configured this way for more than a year.

  I have almost solved this problem on mine (I had read about changing of security in a different post), but ran into a hiccup because of Safari. For some reason, Safari prohibited access to a menu page for my router security settings. You can imagine how boring it is to look at the HP Support use Firefox to access the router and do what a mouse click more, and then I had to make the change. So, if you make this change, be sure not to use Safari to access the gateway of the router Technicolor. Use Chrome or Firefox.

• OfficeJet Pro 8000: Reset/change password wireless Officejet Pro 800 on Mac OS El Capitan

  I need to change the password on my officejet wireless, but cannot figure out how. It seem not to be drivers download more and when I try to put in place via the Apple driver no wireless printer is listed. I have reset to factory settings, but which do not seem to help either.

  How can I reset and set up the connection to printer muy wireless in Mac OS X El Capitan?

  Thanx

  Rich

  Hi @rmaltz,

  Welcome to the Forums of HP Support!

  I understand that you need to reconfigure the wireless on your HP Officejet 8000 printer. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  In order for me to help you better, I will need more information.

  What is the name and the product number of your printer? How can I find my model number or product number?

  As you can see, we have several Officejet 8000 in the series.

  Series of printer HP Officejet Pro 8000 Enterprise - A811

• HP Officejet 4630: still can't print wireless macbook pro or Ipad

  Network test page and just good HP configuration pages

  test page says no problems found and successful for wireless printer configuration

  I can not print wireless

  IPad says no printer found air

  Mackbook pro says printer is not connected

  Since this days HELP!

  Hi nissen4j ,

  Thanks for getting back to me!

  I would recommend this document:

  "Cannot find the printer ' display the error to the HP Officejet 4630 and HP Deskjet Ink Advantage 4640 e-all-in-one printer series.

  Please hold me!

• All-in-one HP Photosmart Premium C309g-m requires the password wireless

  All-in-one HP Photosmart Premium C309g-m we recently had to ge to a new Westell router for the wireless. the printer connects when we put the password but anytime the commection to the router go out it will not reconnect until the password is released. He seems to forget the password.  System indicates that the software is up to date for the printer.

  Hi ckmcgraw,

  Welcome to the Forums of HP Support! I see that you have recently changed your wireless router and now when he loses the connection, you must enter the password on your HP Photosmart C309g to reconnect to the wireless network. The reason why this could happen, it's every time, it loses the connection to the router assigns a new IP address, which would require a password for the network.

  You can set a static IP address for the printer, which should solve your password entry wireless every time, he loses the connection. See the steps below:

  • Print a network from the front of the printer Configuration Page. Note the IP address of the printer.
  • Type this IP address into a browser to reveal the internal settings of the printer.
  • Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  • On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  • Use 255.255.255.0 for the subnet (unless you know it's different, if so, use it)
  • Enter the IP Address of your router (on the Page of the Network Config) for the gateway.
  • Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  • Click 'apply '.

  Please let me know the result, I hope this helps!

  Thank you

• Frozen BlackBerry Smartphones after typing the password (). Help!

  

  Any ideas before making a hard reset?

  Last night, my Blackberry is not completely unblock after as I type my password. I type the right password and press ENTER, the password input section darkens (or it will stay on the "Enter Password" screen and seem to freeze). (If I type the wrong password it just invites me again, so I know I type the password). This is according to that multiple battery pulls.

  Sometimes, after you type the password, I can hold the blackberry button and it will bring to the top of the box that allows me to BBM, browser, homescreen, etc and I can "switch" to this program, but there is a sort of shadow frozen area enter the password on the app that never I going to and I can't use the keyboard or the trackball in these applications.

  This "box of jelly ' prevents me from using any application on my BB!

  I CAN receive calls. Barely. I can only make calls if I remove the battery and only unlock the phone and go to the option to purchase the place.

  I upgraded to OS 5 a week ago and until last night, things were fine. I hear my BB when it receives messages (work tones) or txt etc, but cannot read anything due to the lock!

  The only suspect is Google Talk, I have installed two days ago and seemed to be hogging resources and drain the battery, however the phone worked well for about a day with it on. Google Talk is perhaps run at startup and hang up things? I doubt it, but it is full disclosure.

  I also, pulled battery and removed the micro-sd card to see if it had an effect - unfortunately nothing helped.

  An analogy I can think of it is as if Windows Explorer is blocked, but everything else works.

  THOUGHTS?

  Try this:

  (1) make sure that you have Blackberry Desktop Manager installed.
  http://NA.BlackBerry.com/eng/services/desktop/
  (2) on your PC, go to start > run and copy and paste the following line exactly (i.e. with quotation marks):

  'c:\program files\common research in motion\apploader\loader.exe' /nojvm

  (3) the Application Loader Wizard will appear - click on "next".
  (4) in the ' connection: ' drop-down menu, you should see "USB - PIN: UNKNOWN". Click on the button "next".
  (5) you should see a list of applications ready to be installed for your Blackberry. Try UNclicking the Google Talk application and remove the device and we'll see if that is the question.

  NOTE: If you do not display the list of applications mentioned in step 5 and instead to see the message "the Blackberry Desktop Software has no Blackberry Device Software for the device you have connected to the computer. Contact your wireless service provider or system administrator', then you must download the Blackberry operating system for your support and your device.
  http://www.BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads
  Just select the appropriate type of carrier and network, select your Blackberry model from the list and download the latest version. Install this download and follow the steps above again and you should be on the right track.

• How to hide the password wireless

  Hello

  Anyone know how to hide windows Xp and 7 password wireless?

  Thank you in advance.

  Kind regards

  Lanzartel

  Hello

  Thank you for contacting Microsoft Community.
  Go to the properties of the wireless network-> go to the Security tab.
  Under the network security key, you can find the option Show characters. Remove the tick and the password will be hidden. Click Ok.
  If the station is not related to your query, answer here.

• MacBook pro continues to tell me login password is wrong when I know it's good. After typing the password even about 9 times, it connects

  Hello! When I turn on my macbook pro and enter my password, it always says that my password is wrong. I know that my password is right for you. I type the right password even 5 to 9 times until it works. After that I are connected and stay away from my computer for a while, he falls asleep. When I move my mouse and type in my password, it always works the first time. The problem is when I turn on the mac and type my password. It becomes very annoying. Someone please help?

  Follow the instructions to 'reset' your admin here password > change or reset the password of a user account from OS X - Apple support

• I want to open Twitter, but after I typed the password, it does not open, but the message for the PW record appears... can you help me?

  I use FF on a different computer, and the pages I used in the original opened, with the exception of Twitter. I give you the PW and the message to save the password, but HP's Twitter page does not, instead, the registration page is one that makes... I tried with another system and the page opens, so I know that the problem is not Twitter, but FF. can you help me? I want to open Twitter here...

  This problem may be caused by corrupted cookies or cookies that are blocked.

  • Check the permissions on the subject: permissions page and in "tools > Page Info > Permissions.
  • https://support.Mozilla.org/KB/fix-login-issues-on-websites-require-passwords

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

• OfficeJet 6600: flashing of the indicator wireless.

  Why suddenly the button (the small blue button at the bottom of the printer interface) wireless starts to Flash? I'm usinga USBconnection.

  It simply means that you are not connected to your wireless SSID router. Normal since you are connected USB. If you want you can disable the connection Wireless in the printer and it stops. Info is in the User Guide.

• HP Officejet 4630: HP Officejet 4630 than all the shortcuts to print are locked

  The printer is new and is connected via the USB port on the computer that is running a new copy of Windows 10 x 64 ('fees': I've upgraded to Windows 10 and reset the computer). The driver is from the OJ4630_Basicx64_198.exe file (so just basic pilot). I can scan and I can print a diagnostic page, but I can't print anything else. All shortcuts printing have symbols locked beside them (please see attachment).

  Thank you!

  

  Take a look at this link.

  Regarding shortcuts locked, those are the shortcuts by default HP.

  You to edit & save them under your own name of shortcut.

• HP officejet 4630 does print the pages

  I have all in one model 4632 and have reinstalled three times.  He continues to not print all pages when printing from my laptop which uses Windows 8.  It prints well unique pages, but as soon as there is more than one page it stops usually half way through the third page. It also does not meet the "print on both sides" function when more of 4 pages. The only printing several pages is a real pain. I often have to do a "page current impression" on every page in order to get a complete printout.

  Hello world

  After working with Microsoft on this issue, which was the root caused a problem with the WSD Port of Microsoft that use to communicate with the HP printer.

  Microsoft has created a new version of the WSD service that I recommend that you install.

  This update can be found here

  http://support.Microsoft.com/kb/3000461

  In our tests, this update helps to address this problem.

• Try to open a session, after typing the password, I get... The user profile Service service failed to connect

  The user profile Service service has no logon. Profile of user can not...

  So what do I do to fix my computer

  Please see the links to solve this question below. "The user profile Service has no logon. Unable to load the user profile.

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  http://support.Microsoft.com/kb/947215

  If this post can help solve your problem, please click the 'Mark as answer"or if you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.