OfficeJet 6600: Missing or doesn't have a printhead

Similar Questions

• Re: How to do a reset on an Officejet 6600 e-all-in-one C155A

  I can't use the screen touch because it allways says, missing or doesn't have a printhead with the installation catriages in, and it will not identify new catriages.

  Hello @bk85,

  Welcome to the Forums of HP Support!

  I understand that you get the message "Missing or has no print head" on the front panel of your HP Officejet 6600 e-all-in-one printer. I want to offer my help now to resolve this error message. Now, you specify in your message that you get this error message while using the configuration of your printer cartridges. If your printer has never been used before you need to use cartridges Setup to initialize the print head system in your printer. However, if you have used the HP Officejet 6600 in the past with cartridges installation, you can use new cartridges without problem in your machine. In saying this, the print head message you get refers to the part that the cartridges will fit. The printhead "reads" the cartridges and put the ink on the page. If the print head is defective in your printer, new cartridges will not solve this problem. On the contrary, a replacement of the entire unit may be needed as the print head is a non-replaceable element in your printer.

  Can I have it please click here to access the troubleshooting step designed to resolve this error message. If the error persists after completing a replacement printer reset would be necessary. If you need a replacement, I highly recommend contact our telephone Support queue to explore the additional hardware options.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  Please let me know if the reset solves the printhead error you receive. Good luck!

• OfficeJet 6600/6700: How can I stop my HP Officejet 6600/6700 stop printing reports?

  I just installed a new HP Officejet 6600/6700, but whenever I have to send a fax it produces a report. If I misdial or there is no answer, it also sends a report. I see these just a waste of paper and ink. How can stop the production of reports - I have looked through the manual but find nothing in there to help. Thank you.

  Hello

  Please try the below mentioned steps that should solve the problem.

  On the front panel of the printer

  Press SETUP (wrench) > Fax Setup > Fax reports >
  the Fax Confirmation Off = value
  value = Off Fax error report

• My iphone camera 6 doesn't have an option to take direct pictures IE 3 small circles are missing. How can I reset the camera?

  My iphone camera 6 + doesn't have an option to take direct pictures IE 3 small circles are missing. How can I reset the camera?

  Restart your iPhone, iPad or iPod touch - Apple Support

• I have an officejet 6600 and I can not use the copy function. any suggestions?

  I just bought an officejet 6600 and I tried to use the copy function.  Is it possible to copy a few items @ a time on the top

  HI yankee59,

  What happens if you go to your printer and select copy on the front panel? Do you get the options to copy as many copies ect...?

• OfficeJet 6600 connects to the wifi network

  Hello

  I bought an Officejet 6600 and effortlessly connected to my wifi network, print and scan for a day. And there are two days that he stopped conntecting to the wifi network. In the meantime, our router turned off and turned back on. That's the only difference.

  First of all, the printer would not even detect the wifi network. I solved that by changing the configuration of the router (Cisco 3925 EPC) and passed under the Setup wireless "Wi - Fi protected setup" to "manual". I can now see the network on the printer again.

  But after that I've selected my wifi network and enter the WPA password, the printer tells me that the network connection is impossible. I printed a page of diagnosis, which told me that the problem is perhaps related to the MAC filter. But I have no MAC filters. I also tried to pass of WPA/WPA2 to WPA only, but that doesn't change anything.

  I also tried to set the mode wireless via the USB cable, but no avail. Everything seems to work, until the moment when he tries to connect to the wifi (screen with 'configuration' with the large antenna and pulses of radio waves).

  Should I give up and bring it to the store? I'm getting desperate!

  Thanks for your help in advance,

  Raphaël

  OK, to make sure I understand - the printer connects effectively to your wireless network, and well it works for a while once the printer goes to sleep, your computer or router may not wake.

  If this is the case there are a few things that we can try:

  1. in the settings of your router, make sure that the multicast is enabled.

  2. set the 2.4 GHz router to 11 channels.  I know it sounds weird, but please try.

  3. set an IP address of the printer:
  
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.
  
  Now, stop the router and printer, start the router, wait, and then start printing.

• HP Officejet 6600: hp6600

  Anyone know the heavier weight of paper that goes through this printer please? (In gms)

  The heavier, I tried is 160gms, but I really need something thicker, but I don't want to take the risk of breaking my printer.

  Thank you

  The document here , said the Officejet 6600 can handle 200 g/M ^ 2 notecards and 250 g/M ^ 2 photo paper.

  E-all-in-one printer, HP Officejet 6600 range

  NOTE: The e-all-in-one printer HP Officejet 6600 doesn't have a duplexer.

• HP Officejet 6600: Cannot scan

  My printer works wirelessly and my scanner does not work, now it doesn't. It is said to ensure that the feature is enabled. How?

  It says software Open HP printer, select actions scanned, and then select Manage scan of the computer.

  I can't print to HP software.

  HI @DZ4

  Thank you for using the HP forum.

  You can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-6600-e-all-in-one-printer-series-H711/4322968/model/4323587#Z7_3054ICK0K8UDA0AQC11TA930O2

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  How to scan to computer

  Once you have installed the software:

  1. click the printer (on your desktop) and it will bring up the HP printer Assistant.
  2. in the menu analyze, there is a 'manage Scan to Computer', click on that.
  3 make sure you have "Enable" Scan of the computer. Also, make sure that the tab "automatically start Scan of the computer when I connect Windows" is checked if you want to perpetuate this feature. (the following video will show you how)

  Scan to computer
  https://goo.GL/Ob5wp5

  Hope that helps!

• OfficeJet 6600: is it possible to enlarge a scanned picture?

  I have some pictures of 6 x 4 I've been scanning. But the analysis shows very small photos. Is there a way to keep the home but make them a little bigger?

  I can't find the DPI settings anywhere

  Hi @cgm707,

  I understand that you wonder if you can enlarge a picture scanned with your HP Officejet 6600 on Mac OS X 10.10. I'm happy to help you!

  You can try alternative methods of analysis within this post, Re: iMac OS X 10.9.3 scan driver for HP OfficeJet Pro 8500 a A910a to iMac doesn't seem to be, by my colleague @Sunshyn2005.

  Or, after the image is scanned and saved you can use a free image editor such as: The GNU Image Manipulation Program, to enlarge the photo.

  I hope that answers your question and I thank you for posting!

• OfficeJet 6600: upgrade of Windows post 10

  After upgrade Windows 10 on 29/07/2015, my 6600 Officejet continues to work and print. but when I click on my desktop icon to view ink levels or that scan a page comes up saying install new printer.

  In the control panel Officejet 6600 is indicated as being installed and work and notice that in another thread, there is a link for HP printer drivers that says if the upgrade of Windows 8.1 for Windows 10 printer will continue to work. I suspect that a Windows 10 driver is needed somewhere, but cannot find one in the page Web of HP.com drivers. Also when I followed the links in the page that appears when I click on my icon it doesn't drive anywhere which resembles a desktop printer software download.

  Ex Airways.

  Had another go to resolve the issue today. Uninstalled and reinstalled printer software again. This time success all functons printer now satisfactory. I don't know but perhaps HP have written some new drivers for Windows 10 of the day overnight?

• OfficeJet 6600 fails to print via WiFi in Windows 8.1

  My 6600 Officejet will not print anything wireless (with the exception of the test pages).  Many other posts about this problem, but after about 5 hours of research, nothing has helped.  When I got to the printer, it worked great, but then at some point that this issues started.

  Installation program:

  -Windows Pro 8.1 (my problems seem to begin around my upgrade from 8 to 8.1)

  -Router Asus RTN - 56U

  -Firmware version to print is MIM2CN1322DR

  -Install the latest drivers for printer from 11/03/14

  Details:

  -Whenever I try to print from any source (web, word, etc.) it fails to print and the dialog box displays a HP that says "doesn't have to communicate with printer."

  -If I run the new version of the HP Print and scan the doctor AFTER a failure to print it says 'Print Queue error fixed.  However it still does not.

  -If I run the new version of the HP Print and scan the doctor BEFORE a failure to print it says that everything is fine.

  -Sometimes I can get the printer to print after restarting the computer and the printer, but it seems that once the printer goes to sleep, it stops working.

  -Printing of the test pages always seems to work, and the printer indicates that it is properly connected to the network.

  I tried a bunch of stuff already with no luck, here's what I tried.

  -Tried to re-install the drivers (basic and complete) several times.

  -Uninstalled drivers, then crossed CC driver of the HP cleaning all the 4 steps, then reinstalled the drivers again.

  -Updated my firmware to the router

  -Checked for printer firmware update, none is available.

  -J' tried every troubleshooting step in this article: http://support.hp.com/us-en/document/c02221706

  Any ideas will be greatly appreciated, otherwise I could return this printer as I am out of ideas

  Hi Cheetah12,

  I was able to partially solve this problem, you can see the conversation in the post below.  It begins as someone elses question, but look for my first post in response.

  http://h30434.www3.HP.com/T5/printing-issues-troubleshooting/error-message-quot-HP-OfficeJet-is-in-error-state-quot/TD-p/2752217

  I will basically be this amount until there is a bug with Windows 8.1 or HP drivers on the 8.1.  I had no problem in windows 8 until I upgraded to 8.1.  It may also have something to do with the fact that I did a full format when the upgrade to 8.1, I made an in place upgrade.  However after cleaning off the coast of a trace drivers, then reinstall and still do not have work, I'm skeptical about it.

  If you read the other post, I installed the printer, then I had to manually add the printer even through the IP address in the TCP/IP protocol in devices and printers.  A device uses the "HP". "Port and the other device uses the standard TCP/IP port.  There is now a duplicate, but now I can print to a printer (remember that I now have 2 devices for the printer).

  So, in my opinion, it's a problem of port, and since then I have lost enough time, I spend more time trying to figure this out for awhile.

• OfficeJet 6600: print head

  I'm having with my printhead on my Officejet 6600 I bought a little over a year.  I had to replace the print head twice on my last HP printer.  Is this a common problem with Officejet printers?   I don't know if I should replace the print head or buy another printer from another manufacturer?

  Hello

  OfficeJet 6600 doesn't have a replaceable print head.

  IAM surprised to read in your post that you had replaced the printhead twice.

  Problem with printhead would lead to service the printer.

• HP Officejet 6600, uninstall problem 2081883398

  Hello

  I have a really frustrating problem with my printer HP Officejet 6600. I'm using windows 7, 64 bit.

  All of a sudden the scan function stops working.

  I tried to uninstall the HP Officejet 6600 Basic programs, but when uninstalling this has place of message:

  Error - 2081883398: failed to uninstall the device with serial number: C939DARJIJ05RN.

  If I choose ignore, uninstall the software, but the driver "HP Officejet 6600" are still there, but does not. In addition, this driver are listed in the device 30 Manager - 40 times.  I tried several methods to remove the driver.

  If I ignore this problem to uninstall and reinstall the programs basic HP Officejet 6600, everything is OK until I try to install the wireless printer. The program finds the printer and printers IP address, I mark a press "next". The message "Network Installation missed" takes place. "

  I have installed and uninstalled programs several times, tried to remove the drivers not working not (also in the 7z-cards back), but I have not managed to come around the problem.

  Please - I need help!

  OLHO

  Hi olho.

  This occurs due to malware or other non legitimate software on your PC, please follow the following steps to resolve this problem:

  1. From the control panel > uninstall a program. search for the following keywords:
     Bandoo, IAC, APN, SweetIM, iLivid, Ask Toolbar, SweetIM, Appshat, movies Toolbar and remove any existing result.
  2. Restart your PC and go to the Device Manager, check if these instances can now be uninstalled.
  3. Click the view menu and select Show hidden devices and then continue to search for and remove the printer from the printers / print queues / imaging devices / multifunction adapters / other devices.
  4. type % temp % of the start menu search bar. Open the temp folder, and then open the most recent installation folder that begins with 7z, then open the Utils folder.
     To open the X 86 a 32 bit OS, open the X 64 folder for a 64 bit OS... If you are not sure of your operating system type, follow these steps:
     http://support.HP.com/us-en/document/c03666764
     Run the RemovePreinstalledDrivers file and allow it to reach 100%
  5. Go 2 folders back to the 7z folder and locate the MSI Setup file:
     Research of * x86.msi or * x 64.msi, depanding on your type of operating system.
  6. Right-click on the largest MSI file out of the 2 resutls, then click on repair. If you get a prompt that it is no longer valid for select software installation instead of repair.
  7. Restart your PC.
  8. Open the Officejet 6600 software and follow these steps to reconfigure the device, check for the difference.

  Please let me know if this is useful,

  Shlomi

• OfficeJet 6600 / Officejet 650: roblem recognition new printer when printing to adobe files

  Having a problem with my Officejet 6600 when I try to print a file "adobe". The problem is that the onl print window shows my previous printer that was n Officejet 6500 E709n. I NC does not change this in the print window. I have removed all traces of the Officejet 6500 E709n of my system and have reinstalled the current printer from the disk.

  Any ideas? Need help.

  TallPal1

  Hi @TallPaul1,

  Since you seem to be able to print from other programs, I think that the question has something to do with Adobe. Maybe you will find the following article, I found the site useful adobe: PDF print troubleshoot | Acrobat, Reader.

  If the problem persists, it may be preferable for you to reach the Adobe community.

  Good luck! If there is anything else I can hep you let me know. Please go on the HP Forums!

• Starting with HP Officejet 6600 and cannot change the page size

  Hello

  You have just purchased HP Officejet 6600 all-in-in-one and found that there not a duplexer, which is very very annoying! However, if I can just change the paper size, I can live with the disadvantage to the paper.  I have a Word document that is the flyer for our company, a document A4 which must be printed on A5 paper.  Old Canon printer I could make the A4 as an A5, but now I can't.

  Hope I explained the correct problem and the TIA for help.

  

  In my copy of Word 2007, I am able to evolve in A5 paper.

  Be sure to select A5 in 6600 preferences.