OfficeJet 6600: Officejet 6600 turns off

Similar Questions

• HP Officejet j5780 turn off, then on

  All of a sudden this printer did not finish the trunk upwards. Just to repeat myself "turn the power off, then on. All of the lights on the front flash also. Is he dead?

  Has worked well so far. Have also endorsed two cartridges, left with unplugged power cable and then were. Same problem

  All solutions please

  Thank you

  Found out that if I take the two ink cartridges, then it boots until he tells me put them down. Then it goes down.  Think it might be something to do with this area. There is a lot of excess ink and gunge all around the area of ink. Is it possible to have access to clean here. Is there a routine for this?

  Thank you

• OfficeJet HP 6968: officejet hp 6968, turn off the ringer

  Is it possible to turn off the ringer on an HP Officejet 6968?

  Thank you

  Hello @Kathieh3,

  The steps I have mentioned must be done on the printer screen, not on the computer.

  On the printer screen, press 'Fax'-'settings'-'fax advanced settings'. Once you scroll through the menu options, you will find the "ringing" or "ring volume" option. Select, then reduce the volume.

  Let me know if that helps!

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• OfficeJet Pro 8620: WiFi will not turn off

  Because of a problem with my modem compatible wireless (the problem being that its ethernet ports became defective), for awhile, I had turn the WiFi feature to provide Internet connectivity to my iMac.  Similarly, for the first time, I enabled WiFi on my HP Officejet Pro 8620 so I could keep a printing capability.

  Once my new modem arrived, I restored my complete ethernet network between the modem, my iMac (and other devices) and the Office jet printer 8620 Pro.  Everything works fine now!

  However, the printer Officejet Pro 8620 WiFi ability not shut down despite the operation by an ethernet cable and there is no WiFi from my modem.  I know the Officejet Pro 8620 always emits WiFi like my iPad and my iPhone indicate that it is.  As my wife is concerned about these RF transmissions that are on the other side of the wall adjacent to our bed, she asked me to turn off the Officejet Pro 8620 WiFi.  I've restored the "Default network" printer, but this is not the case.

  According to the instructions of the printer, 'Wireless does not work with an Ethernet cable connected to the printer' However this is clearly not there.  How can I solve this?

  Your WiFi is turned off.  Your wireless Direct is not off.  Disable wireless directly into the printer.   Info is in the User Guide.

• HP Officejet 4620 e-all-in-one stop wireless print whenever it is turned off

  My HP 4620 stop wireless print whenever it is turned off, although it is connected to the network (by the results of the test network wireless, pass & the quality of the signal is excellent).  No troubleshooting - HP Print & Scan Doctor work there is no help, I have to uninstall & reinstall the printer each time to be able to print wireless again.

  I use it on/on button to turn the printer off, don't disconnect not.

  Please help, or I need to return to the store, this is the third time!

  I also had the same issue and after a few game it seemed to have fixed so here's what I did... Hope this helps someone else.

  -My printer is connected to my wireless network.

  -On my computer that I'm connected to the printer through the IP address 192.168.1.153... (Yours may vary) in a browser

  * You can find the ip address printers on the control panel of the printers by pushing the wireless button and pushing the ok option 1, it should appear with the intensity of the signal and the ip address is at the bottom.

  -Once I was on the Printers page in my browser, I went to the tab network at the top.

  -Then to Internet Printing Protocol section (on the left in the advanced settings)

  -On my own PPI was already on, but the location was empty I put a '1' in the location box and then applied settings.

  -C' is the only thing that I changed and now my printer is asleep as always, but when I print something from my iphone, mac or pc it wakes up and prints as it is supposed to!

  BTW before I went to the printer via the browser. I changed layout sleep in 15 minutes via the Control Panel on the printer itself, don't know if it helped the issue or not because I still had the problem of sleep after I set the timer to 15 minutes instead of 5 min. But I solved my problem after performing the steps above!

  Also note that on the one hand some ppl on here say it's a network problem or a router! This is NOT the case I never even tried these roads and I solved my problem only by changing the setting of the printer! I have not set a static ip address or something like that!  The above steps is things ONLY I touched and my problem is SOLVED!

  Router: NETGEAR AT & T 7550 wireless router/dsl Modem

  -Security: WPA2-PSK (AES)

  -Printer connected to the router via WPS (push button configuration)

  Printer: HP Officejet 4620e all-in-one

  Computer: Apple iMac OS X Version (connected to the network via wifi) 10.7.5

  Dell running Windows 7 server (connected to the network via wifi)

  Apple iPhone 4S (connected to the network via wifi)

• How can I turn off ringer on Officejet 4620

  I have an officejet 4620 connected to my incoming phone line. When I'm with a client I want him to not ring. I have a machine ansering in the system and taking calls. How can I disable the ring or make her volume 0

  Also is there a way to stop the light for the wireless network to go or not blink constantly.

  Hi JClaiborn,

  The volume of Fax:

  1. press on the installation icon (key)

  2. highlight and press the setup of the fax machine (2)

  3. highlight and press the basic menu (3)

  4. highlight and press (5) Volume sound Fax

  • Off
  • Soft
  • Loud

  Adjust the Volume:

  1. press the Setup (key) icon

  2. go to preferences

  3. go to Volume

  4. choose the desired option

  • Off
  • Soft
  • Loud

  Turn off wireless light:

  1. press the Setup (key) icon

  2. navigate to the network

  3. turn off the wireless radio

• HP Officejet 6830: wants to turn off printer 2-sided, and the author of the previous question link does not work

  to turn off printer 2 faces, and the author of the previous question link does not work

  Please read this post then provide some details.  What operating system? Windows, you can change the default value by going into the directory devices and printers, click with the right button on the Officejet 6830, select Printing Preferences, and choose the desired default values, apply.

• How to turn off ringer on my Officejet 4500 Wireless all-in-One

  How can I turn off the ringer on my Officejet 4500 Wireless all-in-one unit?

  My operating system is Windows Vista.

  Hi luxorsecurity,

  Follow the steps below to disable the Speaker Volume

  1. press the setup button (key no. 8)

  2. press the right arrow to the base and then setting OK

  3. press the right arrow to the Speaker Volume, and then select one of the options below

  • Soft
  • Loud
  • Off

  

• How to turn off ringer volume officejet fax 6700

  The volume of the ringer on the fax can be silenced or deactivated in the hp Officejet 6700 Premium?

  The incoming fax line share the same line as my phone.

  I turned Off the Fax its Volume, which disables the connection and the composition of sounds, however, I was not able to turn off the ringer on the fax.   The rings of fax every time my phone rings and I want to stop it.

  Any thoughts?

  Ironically I came here looking for the same thing - same day, even headache (volume of the ringtone by fax).

  Looking further, I found this in the manual online, under "Change the fax settings" on page 63:

  Adjust the sound volume of fax
  This procedure allows to increase or decrease the volume of the sounds Telec.
  To adjust the sound volume of fax
  1. Press (right arrow) and then press Setup.
  2. press on the configuration of the fax and then touch basic Fax settings.
  3. Fax the Volume button.
  4. press to choose soft, Loud, or off.

  I put off.

  Worked for me!

• HP Officejet 4500 G510: Printer itself turns on and turns off continuously and does not print because it's on if briefly

  OFFICEJET 4500 HIMSELF GOES TO MARKET AND STOP PERMANENTLY SO DOES NOT PRINT BECAUSE IT OF ON IF BRIEFLY AND TO BED 'WARM UP' WHEN TURNED ON THEN TURNS OFF.

  The troubleshooting in the here document steps can help solve the problems of power with the g510 printer Officejet 4500.  If you need to replace the power supply I got good results in purchasing supply power modules on eBay or Amazon.

• Is it safe turn off an officejet pro 8500 a when not in service.

  Is it safe turn off an officejet pro 8500 a when not in service. The electricity in my area off two or three times a day and every time that happens the printer begins once again reset. I'm afraid that whenever it cleans the printer heads is a waste of ink.

  Hi fernan215,

  Yes, turn off your printer when not in use. A fluctuation of current or failure can cause more damage to your printer when it is still on. You are also right that the printer is cleaning the heads and align the cartridges every time it is turned on. This is to ensure stability, good maintenance and calibration of your inks for the best output every time.

• "HP OFficejet Pro L7680 turns off and won't turn back on"

  HP OFficejet Pro L7680 turns off and won't turn back on.

  Hello untech,.

  I see it's been a while since you have posted with us on the HP Forums.  Please, let me take a moment to say "Welcome Back".

  I see that you have a problem with the printer l ' auto turn off and not turning it back on.

  You happen to have the printer power cable connected to a power strip/bar?  If so, please try to connect the printers power cable directly to a wall outlet.  Here is a document that explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  The printer in the document is a LaserJet printer but this document is intended for HP products in general and only use the LaserJet printers for example.

  I'll also include a document indicating when the HP printer will not be running or to respond when the power button is pressed.

  If by chance the problem is not resolved after you complete the steps described, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Please do not hesitate to write me again if you have any other questions.

  I wish you a great Monday!

  See you soon,.

• OfficeJet L7780 how can I turn off the ringer?

  I want to turn off the ringer (phone ringing sound) on my OfficeJet L7780. I tried to work in the printer menus. I searched everywhere, including the manual and have not found an answer. Please help if you can.

  I only use the OfficeJet for outgoing faxes, I just need to hear the dial or connect tones, so if I turn those off to turn off the ringer, it's okay. Thanks in advance for your help, Ed

  Hi EdBublanski,

  Look on page 88 of the user guide.  Click here  Does that help?

• OfficeJet 8710: How to turn off WIFI on the printer HP 8710

  Just bought a new printer HP 8710 for use of college, but due to college rules I need to completely disable the wifi.

  How is the best way to do it?

  TKS

  amsoilguy

  Amsoilguy wrote:

  Just bought a new printer HP 8710 for use of college, but due to college rules I need to completely disable the wifi.

  How is the best way to do it?

  TKS

  amsoilguy

  The best way to do this is to download the manual and read.  On page 103 is your answer.

  Enable or disable the printer WiFi
  On the printer Panel blue wireless light is lit when the printer WiFi enabled.
  NOTE: Connecting an Ethernet cable to the printer automatically turns off the wireless feature and the
  Wireless lighting.
  1. in the printer control panel, press or drag to the bottom of the tab at the top of the screen to open the
  Dashboard, press (wireless) and then press (settings).
  2. touch wireless settings.
  3. tap on activate or disable wireless.

• HP officejet 8500 a 910 will not turn off

  I have a 8500 a which worked well in the past. It is set up as a network printer. last week went to use the printer and the power button has been lit in green and then dimmed and then back to green, a slow pulse glow. I couldn't be able to top or power down. LCD screen was also incarcerated. I have one plugged in the unit from the wall and waited a few minutes. Clogged again and it went through the start of the SS.  tried to no print, no luck, lcd screen calmed locked and I can not turn off the machine using the power button.  Help

  Hello

  Please perform the below mentioned steps that should solve the problem.

  • Unplug the power cord from the back of the printer.
  • Power to the router.
  • Connect the power cord to the printer. If the printer does not power ON automatically, then press the power button on the printer.
  • After the printer is in sleep mode, do a copy of the document or image.
  • Now, you can power on the router

  Please call the HP Technical Support for assistance.

  If you are in US , toll free # is 1-800-474-6836.

  If you are not in US , then log on to www.hp.com , bottom left it is an icon of the world map, click it, then select the region that you belong to, which would then provide the support options for you for this region.

  Kind regards
  Jabzi

  Give Kudos to say 'Thank you' by clicking on the White Star under my name.

  Click on 'accept as Solution' if it has solved your problem, while others may find it.
  I work for HP