OfficeJet 7000 wide format: cartridge Blink led an officejet 7000 wide format

Similar Questions

• Photosmart c3150 check ink cartridge blink after replacing the cartridge

  Almost every time I have to replace a cartridge check ink cartridge blinking and I can not find anything wrong.

  If the led check cartridge blinking after changing a cartridge, then there is a document with steps to help solve this problem. The document can be accessed here.

  Hope this helps Richard.

• Orange satellite C660 "blinking led"?

  My C660 is about 15 months now and no additions/software etc. since purchase of Argos is managed primarily by the sector.

  However, a few months ago I noticed the front left (DC IN / battery) seeing blinking amber, and the right LED (green electricity) had completely - out despite being connected.

  I fixed it by unplugging / plugging the power cord into the laptop, but the problem has persisted over the past months. I can eventually get the battery charge but it takes sometimes several attempts to do, and the light becomes even solid orange flashing orange fresh medium (leading then to an another unplug/plug). However, I get the message "plugged in, not charging".

  When I get the flashing amber he simply lists the remaining power and continues to lose, despite being connected.

  This could possibly be a ropey connection or bad in the power cable? Probably the cord adapter sector?

  Post edited by: vincenzo66

  > This may be a ropey connection or bad in the power cable? Probably the cord adapter sector?

  Yes, it might be possible that the connection between the power adapter and a laptop power chord is loose or maybe the power cord on the motherboard fails.
  Its really hard to tell what might be bad exactly.

  I think in the first step, you should check if the adapter is OK. The laptop must be tested with new good adapter to work. If the problem would still appears... Well then the motherboard needs a check

• HP6000 inkjet printer: cartridge blinking while new cartridge in place

  What happened a couple of times. The yellow cartridge flashing and after replacement

  the cartridge with a new cartridge HP light continues to Flash. After replacing ALL the

  cartridges, the light continues to blink on the yellow cartridge, and although the new cartridge is

  * beep *, the indicator insists there is no cartridge there.

  The other time that this has happened, after several attempts, he finally registered his existence, but this time

  It does not accept it.  How to fix it please?

  Problem solved! A few things I've done:

  Hard restart - printer unplugged and disconnected from the computer, waited a few minutes then

  attached to the computer and plugged

  Very carefully cleaned the metal contacts on the cartridge and printer

  then reinserted cartridge.

  Once more, turnef printer off, then on again.

  Finally the received msg HP ink cartridges have been installed.

  Thanks to everyone who helped me with this isdue.

  GBarb

• I can't print. My printers cartridge blinking and I have ink.

  My cartridge light continues to blink as if I don't have ink.  I just put in the new ink.  Help

  Hello

  may have installed the wrong ink cartridge

  go to the website of printer manufacturers and are looking for a manual or troubleshooting for your printer model steps

• Satellite 1400-103 does not start (just blinking led DC)

  When I led plugin the AC DC adapter goes orange and starts flashing (code: 3 flashes - pause - 3 flashes flashes - pause - 2) and the laptop does not start.

  I tried several different batteries with no result. Can someone tell me what exactly is the code above?

  Hi Paul,.

  These sequences are used by repair technicians to help diagnose the problem. Unfortunately, there is no generally available documentation describing, so you will have to refer to an authorised Service Agent to get your problem diagnosed or repaired.

  Sorry

• Pavilion DV4-2040us: laptop cannot go further after turning on with blinking LED

  It stops after turn it on for a few seconds and Caps Lock and Num Lock LEDS Flash at all times (once per second, and on and on).
  What it means?  It turned out just to be like this, after that he went on hibernation, last week.

  Help, please!

  Hi @Minou1296,

  Welcome to the HP Forums! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  Thank you for posting. I read your post and I understand that your laptop is unable to start, and only the light flashes. I wanted to help.

  You can use the document below for troubleshooting:

  Computers laptops HP - computer won't start (Windows 7, Vista, XP)

  Flashing light usually indicates a hardware problem. If the troubleshooting steps do not work for you at the link above, you can use the http://www.hp.com/contacthp to create a folder for your problem and contact HP.
  If you do not live in the United States / Canada, please click on the link
  http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html for details in your area.

  Let me know how it goes.

  To say thank you, click on the "thumbs-up". Accept the post as a solution, if your problem solved, so that other people have the same problem can see it.

  Kind regards

• TECRA R940-1pj - Blink led

  TOSHIBA TECRA R940-1PJ

  PART NO. PT439E-03602QEP
  SERIAL NUMBER 2D090625H

  This computer does not have the fan operation. Summer turned off, the fan was clean when I went to turn it on, gives this error:

  52 h EVER5V voltage is equal to 4.5V or under when the computer is
  boot the system.

  TOSHIBA TECRA R940-1PJ

  PART NO. PT439E-03602QEP
  SERIAL NUMBER 2D090625H

  This computer does not have the fan operation. Summer turned off, the fan was clean when I went to turn it on, gives this error:

  52 h EVER5V voltage is equal to 4.5V or under when the computer is
  boot the system.

• Fast blink on the cartridge light. How long can I keep feeling. It will harm my printer?

  I have a Canon MX882 using 226 cartridges.  Most of the time we have additional cartridges, but occasionally, one ink cartridge blinking fast began before I buy new and that I print, I need the fact.  Printing is still good, light and dark. I have exceeded about 30 pages and ink always seeks not faded.  I'm harming the printer while printing?

  Hi enimary,

  I will start with the quick response: we never recommend printing once the ink indicator shows that the ink is 'out '.

  As the ink level detection is mainly optical, a few traces of ink may still in the ink tank when the 'out' warning.  Let's say your cyan ink is 'out '.  If you print a picture with very little cyan, printing may appear very well since you use so little of this specific ink.

  In each draw, the printhead (element used for 'jet' of ink on paper) will heat up.  As the ink through the print head nozzles, it will cool the printhead and the cycle repeats with each pass.  When the print head try to draw ink in an empty tank, it does not cool the print head and can cause damage or clogging of the nozzles.

  It's really a bet to continue to print in these circumstances, but I certainly understand the need to print in a crunch.  Keep an eye on for the "low ink" warnings when printing.  When a "low" warning, you will have about 25% of the ink still in the tanks.  He is a guest of good to have a spare available ink tank for when he finally reached the stage of 'out '.

  Also, do not confuse the 'low' with 'out' warning warning  I recommend that you view the following Knowledge Base article: checking the status of the ink - MX882.

  If you have any other questions, feel free to contact us!

• Reboot hangs with hard drive led blinking.

  My E6430 Latitude has been win10pro win7pro upgrade - no WOOD setting have been changed. It has 8 GB of ram, inspected, reinstall and test. It crashes with a disc hard blinking led that requires the power to complete on a restart button. No problem starting from button walk / stop or stop.

  I tried to install the proposed updates for the network and the Chipset on the support site, locally and in safe mode - say that they install, but not for the most recent.  The current A16 BIOS does not update the current A17 or A18. Even by pressing the power button on reboot clears the bios and the driver up to date?

  Thank you for your time to consider this, my first post.

  Further investigation found loose on the heatsink - screw tightened then disconnected wifi module intel and reinstall the connector screen just next door. With drive HARD and CD/DVD and removed WIFI, I started in Linux Kali on USB stick and hang and restart to work.  Put everything back together and restart the work! Update BIOS to A18.  Thanks for nothing... Not an exact answer to the cause. Hope this helps someone else.

• hp deskjet cartridge lights keep flashing

  my HP Desk jet F2280 black cartridge light continues to Flash even after the cartridge is installed correctly. I used for almost 2 years. Help, please.

  HP, HP Deskjet F2280 all-in - one Printer customer service
  Flashing lights
  Question: Check cartridge lights
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01430567&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=3390947#N2180

  In my F4180 when the black cartridge blinking continuously I press the power on button a few times until the led stops flashing and the printer works fine.

• HP Pavilion HPE H8 1234: HP Pavilion HPE H8 1234 corrupted BIo 8 beeps and the led lights

  I was updating my BIOS and I got an error. Now, the coomputer starts with 8 beeps and 8 power botton blinking LED. IV tried WIndows update Bios USB, key and B. Im running outta ideals. Someone help me please.

  Hello

  Situations of BIOS corrupted can be not recoverable with some versions of the HP BIOS.

  Disconnect the PC and remove CMOS battery and press and hold the power button for 60 seconds. While the battery is removed, test it with a voltmeter-ohm - and if it isn't close to 3.3 volts, then replace it.  It's a $4 item.  If the battery is good before you reinstall it, plug the PC back in and give it a go.

  This procedure of recovery of the HP BIOS claims to work by internal HP.  Read the instructions carefully.

• Hp134 cartridge is really compatible with photosmart c3183? Not recognized.

  Hp134 cartridge is really compatible with photosmart c3183?

  https://h30042.www3.HP.com/SureSupply/CountryChangeSubmit.action?nav&nav#3

  Had an error with the new hp134 - copy color and cartridge blink = not recognized, full reset does not help.

  Contacts are clear.

  Black print cartridge is hp132 - seem to be recognized and it was working before the color cartridge error. But no printing is available even in black and no self test printing - when you press "Cancel" + "color copy" just "power we" blinks a few seconds.

  Hello

  134 ink cartridge is not compatible with your printer, HP Suresupply list as compatible either:

  

  The 132 black cartridge must be used with the Tricolor 136 only cartridge.

  You can also use the 131 black with the 135 color ink cartridges capacity.

  Any other combination won't work, as you can find below:

  http://h10060.www1.HP.com/pageyield/en-150/yields/PSAIOC3100_page.html?cCode=emea_middle_east

  Shlomi

• DeskJet 5940 - incompatible ink cartridge

  All of a sudden my Deskjet 5940 says that I have a cartridge incompatible color in it.  I use a genuine HP 95 Tri Color that is rated cartridge.  It is in the printer for three months and works well.  All of a sudden it will not work and will not let me us the printer mode "black ink only".

  Using Windows XP (Yes, I know, not my choice - a work computer).

  I searched the database of RESUMES and can not find all the elements to help me here.  Any ideas?

  If you remove the color cartridge the printer should automatically switch ink backup mode.

  Regarding the color cartridge, clean the contacts of the cartridge as described in this document (under the section for "cartridge blinking") can solve the problem.

• My hp Deskjet F2180-> printer all-in-one. Help, please!?

  My control cartridge light continues to Flash, my plain paper is turned on and power light is on too.

  My printer does not print a reason any. Any ideas of what I can do? !! Help, please!?

  Please see the document located here for steps to help fix the flashing lights.

  If the power led is flashing, flashing paper and check cartridge blinking, then it is an indication of a failure of the scanner.