OfficeJet J4680 stuck in the mode of winding

Similar Questions

• iPhone 6s more stuck in the mode of the brick after downloading ios10. Cannot restore via iTunes. error 3014

  iPhone 6s more stuck in the mode of the brick after downloading ios10. Cannot restore via iTunes. error 3014

  After the update to ios10, my 5s iPhone seems to work very well. I reconnected it to iTunes and then it bricked, and I panicked.

  iTunes synced a couple of times, it took about an hour and a half for me. After that it stopped its cycle of synchronization, I unplugged my iPhone - it still bricked. I then did a hard reset and it worked.

  Maybe I got lucky, maybe my iPhone and iTunes need a kick in their buttocks.

• OfficeJet 6000: Officejet 6000 'stuck' in the wireless status

  After using the printer on a minitour HP with a USB connection for a while, I installed the software on a Thinkpad with a link wireless to a Linksys router. The combination didn't work reliably, so I removed the printer and the laptop software. However, the Officejet seems 'stuck' in a State wireless (blue light on); When I tried a clean reinstall on the minitour (from disk), the installation failed. How can I restore the printer to its out-of-the-box condition and get a clean install with USB connection?

  (I thought the Officejet 6000 is a dual-mode device, but it seems to be either / or machine.)

  Price Buhrman

  Hi BuhrmanP,

  This is the only information available for this model restore network settings.

  This information was given by the manual, page 377. OFFICEJET 6000

  

  I disable all startup programs and temporarily disable the Antivirus software before installing the printer to see if it will help.

  How to perform a clean boot in Windows.

  I hope this helps.

  Thank you.

• OfficeJet J4680: Officejet J4680 offline in the middle of Windows 10 nightmare & does not print

  I am running Windows 7 Home Premium 64-bit, and I am logged on as administrator. I am still immersed in an effort to remove Windows 7 after only 10 Windows, but not download or install a week ago. Apparently you updates of Windows is the culprit, and I restored it to what I hoped, was that before this poison pill, but I'm still real messed up. I'm still trying to determine what update caused the damage and uninstall.

  My Officejet J4680 printer hooked up on a print job and would not remove the work hung, so I unplugged and restarted the printer and restarted the computer. This printer has been disconnected, and I couldn't get it online.

  Softwear by printing HP and Dr. 4.7 update installed HP Officejet full feature software scan and driver 14.0.301.0 Got message "HP Support Solutions framework installed successfully. However, there was a problem to download/install HP Support Assistant. He will be tried again later. "Try later on its own or do I have to re - run?

  The network connection seems OK, (active port and driver, both seemed to be correct) and I tried to reinstall printer with "wired (Ethernet) or wireless network. Reinstalled successfully, the printer is shared, printed the test page, Logo Windows and "Windows Printer Test Page" printed, rest of the page is empty.

  All ideas, need more information, or should I just go ahead and try to uninstall the software and try again? Don't know how much of the nightmare of Windows 10 contributes to this. Hope someone has some ideas, that my brain is fried now!

  Hey @vh08-2015,.

  Thanks for getting back to me with all this detailed information!

  It shows your HP Officejet to use a "universal print driver" in your screenshots. In addition, because copies of your printer show installed as 'HPFCEF6D' it indicates that the universal print driver or the Windows driver is used to provide basic printing capability only. It does not resemble your HP Officejet Full Feature print and scan driver is actually installed at all at this stage.

  1. you can permanently delete all the copies of your printer showing installed at this time without worry, as we will reinstall your printer with the appropriate printer driver.

  2. once the printer has been removed from devices and printers (and the Device Manager if it allows) then proceed to step 4 to delete the files Temp.

  3 once the Temp files deleted using download full feature software and driver I've provided previously. When clear us Temp files it erases the download files downloaded and extracted to the installer so by deleting Temp files under step 4 , you will have a clean slate to work with the new download and install.

  4. you should be safe with just after the uninstallation steps I provided earlier rather then by running the brosseuse that you downloaded. Because the package full feature software and driver shows not currently installed and used by your printer probable scrubber won't do much.

  Good luck with reinstall it! I would like to know if you are having problems or have further questions.

• I did a reinstall on my XP. He cleaned the disc then says that he would reinstall. Now it is stuck in the Mode without fail.-"unable to load then reinstall it in safe mode, will restart"

  I had a lot of problems with my desktop computer, so I decided to do a reinstall.  I had to uninstall the old windows machine and then he tried to reinstall.  But the safe mode screen comes up and I get a message that 'could not load reinstall it so that in safe mode, recover to walk'.  He kekeps this and I have no way of getting to my Start menu or anything except f8, etc..  What can I do?

  You're not start from the disc. Check your bios settings to make sure that your cd rom device is set to boot first. Restart the computer. You must first see a screen that says "press any key to boot from a cd. Then you will see a screen that says "NTDetect inspects the hardware configuration of your computer. The screen you will see next will be "loading files". If you see all the other screens then you dΘmarrez not from disk. I'm not really sure of what you mean you got the machine to remove the old windows. The 'old' windows is deleted when formatting that is part of the installation process.

  http://support.Microsoft.com/kb/978307

• Stuck in the mode of reduced functionality after getting a new motherboard

  Hey there,

  
  

  I recently had to put a new motherboard in my computer because one has died. Everything worked smoothly, but now when I try to start I thought my Vista Home product key is not valid for activation so I'm currently reduced functionality mode. Had a look at the thread stickied and it said to run MGAD then here is the data when I ran:

  Thank you

  Diagnostic report (1.9.0027.0):

  -----------------------------------------

  Validation of Windows data-->

  Validation status: invalid license

  Validation code: 50

  Validation caching Code online: n/a, hr = 0xc004f012

  Windows product key: *-* - 9Q27C - 6CWD7-MQ3CQ

  The Windows Product Key hash: qhMbHikwhp/jGNClWTyMpDZP8h0 =

  Windows product ID: 89578-OEM-7332157-00115

  Windows product ID type: 2

  Windows license Type: OEM SLP

  The Windows OS version: 6.0.6000.2.00010300.0.0.003

  ID: {945D83D3-3E04-49DB-9C43-ED177D0B3F4E} (1)

  Admin: Yes

  TestCab: 0x0

  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Product name: Windows Vista (TM) Home Premium

  Architecture: 0x00000000

  Build lab: 6000.vista_gdr.100218 - 0019

  TTS error:

  Validation of diagnosis:

  Resolution state: n/a

  Given Vista WgaER-->

  ThreatID (s): n/a, hr = 0 x 80070002

  Version: 6.0.6002.16398

  Windows XP Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  File: No.

  Version: N/a, hr = 0 x 80070002

  WgaTray.exe signed by: n/a, hr = 0 x 80070002

  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  Version: 2.0.48.0

  OGAExec.exe signed by: Microsoft

  OGAAddin.dll signed by: Microsoft

  OGA data-->

  Office status: 102

  Microsoft Office Standard 2007-100 authentic

  OGA Version: Registered, 2.0.48.0

  Signed by: Microsoft

  Office Diagnostics: B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005

  Data browser-->

  Proxy settings: N/A

  User Agent: Mozilla/4.0 (compatible; MSIE 7.0; Win32)

  Default browser: C:\Users\Ian\AppData\Local\Google\Chrome\Application\chrome.exe

  Download signed ActiveX controls: fast

  Download unsigned ActiveX controls: disabled

  Run ActiveX controls and plug-ins: allowed

  Initialize and script ActiveX controls not marked as safe: disabled

  Allow the Internet Explorer Webbrowser control scripts: disabled

  Active scripting: allowed

  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->

  Office details: {945D83D3-3E04-49DB-9C43-ED177D0B3F4E}1.9.0027.06.0.6000.2.00010300.0.0.003x 32*-*-*-*-MQ3CQ89578-OEM-7332157-001152S-1-5-21-2658439001-2136136964-2856104598Packard Bellixtreme M5740American Megatrends Inc.. V1.02G 20080918000000.000000 + 000CD333507018400FA08090409GMT Standard Time(GMT+00:00)03GATEWASYSTEM 102100Microsoft Office Standard 2007129626819A690526AzUYu4/SHSuquDs9GqQ3NC3b7P + g =81607-309-3142245-6430910

  Content Spsys.log: 0 x 80070002

  License data-->

  The software licensing service version: 6.0.6000.16509

  Name: Windows Vista, HomePremium edition

  Description: operating system Windows - Vista, channel OEM_SLP

  Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f

  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f

  Extended PID: 89578-00146-321-500115-02-2057-6000.0000-2082008

  Installation ID: 043832916062011131945344745962031471011164979785640573

  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkId=57201

  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkId=57203

  Use license URL: http://go.microsoft.com/fwlink/?LinkId=57205

  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkId=57204

  Partial product key: MQ3CQ

  License status: unlicensed

  Windows Activation Technologies-->

  N/A

  --> HWID data

  Current Hash HWID: NAAAAAEABAABAAEAAQABAAAAAgABAAEAJJTGSrSM + Ian + zFxnSKB6B08vQgpQpSrFbMMQ ==

  Activation 1.0 data OEM-->

  N/A

  Activation 2.0 data OEM-->

  BIOS valid for OA 2.0: Yes

  Windows marker version: 0 x 20000

  OEMID and OEMTableID consistent: Yes

  BIOS information:

  ACPI Table NameOEMID ValueOEMTableID value

  APIC1547 091808 APIC

  FACP 091808 FACP1547

  HPET 091808 OEMHPET0

  MCFG 091808 OEMMCFG

  WDRT 091808 WDRT NV

  SLIC SYSTEM GATEWA

  LASRYVITRAGE 091808 OEMB1547

  NVHD 091808 NVHDCP

  If the motherboard you choose as a replacement for is considered a substitute SD/replacement by the vendor for a very available motherboard is longer then you can try the phone activation. You need to make your case as to why this particular motherboard.

  How to activate Windows 7 or Vista manually (activate by phone)
  (Note: some people have reported that the best way to get a real person is just wait, do not close select automated this or this option)

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  5) stay on the phone and wait for a person to help you with the activation. State your case on the motherboard failed.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• CC Adobe stuck in the mode of trial and we have a complete subscription plan

  Yesterday we updated all applications via Adobe CC and just after updates are complete, all the apps went in trial mode, even if we have a full CC subscription plan. Signature to did not help.

  Then we tried to reinstall Adobe CC and all applications, but the installer for Adobe CC has not started. We also used Adobe CC cleaning tool and which did not help also. So we did a clean installation of Windows 7 and Adobe CC, but we have still the problem that some apps (Ps, Lr, Ai, Id, Acrobat) runs only in trial mode, while others (RA, AU, Dw, SOUL) are ok.

  We are working on a project which must be submitted as soon as possible, so please, help us.

  Update: we had a remote session with Adobe support and she she has set the. As far as I saw, there was a problem with the OOBE folder.

• Pay for CC but stuck in the mode of trial?

  IM paying for CC students annual Plan - was blocked in trial mode and now say the trial has expired, please validate. Where can I find the verification codes? There appears no not on my profile under products?

  Thank you

  Hi sturnerrr,

  Do you think any option of the software on the same page. If so, click on it and sign in with your Adobe to activate your software ID.

  Consult the KB if CC asking for serial key: http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html .

  Kind regards

  Romit Sinha

• GET stuck on the mode iPhone headphones listening

  I can't fix it. I tried to clean the plug, hard, reset, reset all settings, and restores the only thing I have not tried.

  I'll be very grateful if someone can help me.

  I fixed it. The problem was that there was something in the port

• I El Capitan 10.11.3 now iTunes is stuck in the mode button after clicking green full page

  OS X El Capitan 10.11.3 version

  MacBook Pro (15-inch, mid 2009)
  Processor clocked at 2.66 GHz Intel Core 2 Duo

  4 GB 1067 MHz DDR3 memory

  NVIDIA GeForce 9400 M 256 MB graphics card

  Clicking on the green button in iTunes.  Window has expanded to full size which is larger than my screen.  Even now don't see NOT the buttons at the top left click on them.  Can not access lower right window to reduce it to a smaller size.
  Pressing 'ESC' does nothing.  Only way is to hit the Q command to close the application.  When you click on it in the dock to open once again, she returned to the maximized window that is too big for the screen and does not allow for any changes to its size!

  Tried the suggestion to change the screen of scaling by default and 1440 x 900, which is the usual setting for the other parameters; tried all possible settings, still the same problem!  No change.

  I would go back to a 'normal' sized window that can be moved around on the screen, made more big and smaller etc. Cannot.

  Try control-command-f, which should turn to full-screen power

• HPG6000 - webcam is stuck in the mode of "popart"?

  I have a HPG6000 with integrated webcam. Using Youcam and Skype the image, it's as if there is a filter "popart" on what we all expect that if we are in an Andy Warhol painting - which was fun at first, but now we would like to seem normal.  I had the PC for years, but this week is the first time I used the webcam.  Any suggestions? Thank you

  Bob

  Hi Woodbeepoet,

  1. you have made no changes to the computer before the broadcast took place?
  2. the problem happens only when you connect to the Skype?

  I suggest you try the steps from the following link.

  The problems of Windows Vista Webcam
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01560721&tmp_track_link=ot_faqs/top_issues/en_US/c01560721/loc:6 & cc = us & dlc = en & lang = & lc = en & product = 3560123 #N190

  If the steps above fail, then I suggest you to post in.
  http://Forum.Skype.com/index.php?ShowForum=2&s=abb6a10aac39980bb756e39921b99f65

• Servo motor gets stuck in the loop

  My project is to control two motors from the pedals with LabVIEW in combination with UMI-7774 and PCI 7350.

  I use a traditional format of State Machine to simultaneously control two motors according to the absolute position mode.

  In one of the first States, both motors are wound manually by using the speed mode (to make a desired voltage).

  In a later State, the motors are wound to a position specified by the user when you press a foot switch. When you press the other pedal, they are then held in the previous "original" position

  After the first "Tension" indicate when the winding engine and the course due to the pedals is running, the program gets stuck in the State of wind.

  Although drivers are told to go to a specific position, they never move and that's why the program is unable to move to the next State.

  I've attached a screenshot of the winding State where the program is stuck (the engines are not mobile, so when the final position is to compare it with the desired position, the loop continues to go).

  Help, please.

  CAT

  I solved the problem.

  States "Wind engine left" and "Right wind engine" speed has been put back to zero. When the program moves toward States of wind/flow, the speed is always zero (the engines cannot move).

  I simply set the speed value desired in each of the States LBL/RBL (that allowed the engine to get to the position of desire).

  Thanks for all the help,

  Catherine

• OfficeJet J4680: HP Officejet J4680 - Windows 10

  I upgraded my OS from Win 7 to 10.

  While on my laptop HP programs and detection of the printer worked (WiFI), on my PC, it failed to recognize my printer that was installed.

  by pugging USB cable it acknowledged him as a scanner and it works through the program to scan windows

  Add another printer through the devices Panel found that web connected but does not print.

  Finally, in the HP site I found a download for WIN 10, but download constantely fails as begginning, even after the cancellation of the fire walls.

  Bottom line - I can't use my printer on the PC with WIN 10

  Hi @Shlom,

  Welcome to the HP Forums!

  I see that you have problems to use your HP Officejet J4680 printer, on the operating system Windows 10. I'm happy to help you!

  To check the printer hardware is functional, you are able to print a test page? Video: printing a Test Page.

  In the meantime, try the following steps:

  • Uninstall the software. Uninstalling the printer software.
  • Clean boot the computer. How to perform a boot in Windows.
  • Disable all Antivirus programs. Disable Antivirus software.
  • Disable all firewall programs. The WF of end-to-end.
  • Create a new user account. Management of user accounts and connections (Windows 10).
  • Reinstall using the printer HP install wizard for Windows.

  Hope that these aid measures and have a nice day!

  "Please click the Thumbs up icon below to thank me for having responded."

• Print job is stuck in the print queue and cannot be removed in HP OfficeJet J4680

  Original title: HP OfficeJet J4680

  Print job is stuck in the queue and cannot be deleted.  Convenience store said it is fixed, but it isn't.

  Hello

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. what operating system is installed on your computer?

  2. have you made any recent hardware or exchange of software on your computer before the show?

  3. you receive an error code or message?

  4. what store did you try?

  What version of the operating system Windows am I running? :

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

   

  Please follow the steps in the link below and check the issue.

  Unable to print? Print jobs are stuck in the print queue:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02205477&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=3692888

  For reference:

   

  Solve printer problems:

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  Diagnose and automatically fix problems printing and printer:

  http://support.Microsoft.com/mats/printing_problems/

   

  I hope that the information above helps you.

• All-in-one Officejet J4680: how to set scan to scan the document without cropping afterwards

  Is it possible to configure the scanner so that when I scan a document, the digital space includes only the document itself and not the whole scan bed? In its current form, I have to crop each document to remove the excessive scanning area that is not part of the document.

  @JonnD14

  Install the software of full functionality for the printer.

  Printer:

  Range of all-in-one printers, HP Officejet J4680

  Full software features:

  File name: OJJ4600_Full_14.exe