OfficeJet Pro 8600: central panel display

Similar Questions

• HP Officejet Pro 8600: Control panel display

  Hi, the control panel (screen) of my printer is blurred, it is impossible to work or that you configure. I've been connected UBS cable and wireless. I used HP Scan doctor, but I have not found solutions. Thank you!

  Hi @romodos,

  I understand that the control panel display is blurry. I want to help you.

  Make sure that the printer is not exposed to an electric or magnetic field.

  Please, try the procedure described in this document to see if it will help to solve this problem. Do not take into account the title.

  HP printers - printer screen is black or white.

  If the problem persists, go to the Web built-in to the printer server and turn off IPv6, to see if it will be useful.
  Type the IPv4 address in the address bar of your web browser. (Internet Explorer)

  Click on the network, on the left side tab, select network protocols, and then select enable IPv4 only, apply the settings.

  Here is the link to print a Configuration page to obtain the IPv4 address.

  HP Officejet Pro 8600 (N911), 6600 (H711) Officejet and Officejet 6700 (H711) Premium e-All-in-One Printer Series - printing a Network Setup Page.

  If the problem persists, please Contact the HP Support for help. Check the model number and the form to receive a file number for faster assistance.

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• Hi... hp officejet pro 8600 white Panel

  Hi, I'm new to the forum.

  I'll get straight to the point

  I bought the officejet pro 8600 AiO

  After 3 weeks of use my Panel turned to white. I tried to reset the printer to advice provided by experts on the other post but nothing happened.
  Can you please tell me what can I do myself to put it back as it was. Or I have to send my product to the HP service center?

  Hello

  Please perform a factory reset by steps has sent a private message.

• OfficeJet Pro 8600: Small panel light fading

  The small light panel that allows me to choose to fax, copy, scan etc is fading and becomes hard to see. How can I fix to this please?

  Hi @JM178,

  Welcome to the Forums of HP Support! I see that you have problems with the light on the screen. I want to help you. If this helps you to find a solution, please click on the button "accept as a Solution.

• Control Panel more HP Officejet Pro 8600 not lit and will not work

  Control Panel more HP Officejet Pro 8600 not lit and will not work. It worked except the last 4 days. I can use certain features of the computer as a scan but can not manually use Control Panel. Nothing DOES not illuminate. The power button is on but only weakly.

  Hi kwhofms,

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

• OfficeJet pro 8600: not possible to change the scanning of the Panel of the printer resolution settings

  With my Officejet pro 8600, there is no possibility to change the scanning resolution settings when you are working in the control panel of the printer (not present button to touch) when I want to scan to the computer, while in the manual it is mentioned that, after pressing the Document Type, it should be possible to reach the resolution to change the resolution of the scan setting. On the other hand, when the scan to a memory card the button change the resolution settings is present.

  Sometimes for the scanning of all computers to select (winXP SP3 installed on it). The HP printing software is installed on all computers and manage digitization to the computer is turned on. It is possible to change the resolution settings when using my computer with the HP printing software, but as I said not in the use of the printer.

  Thank you to help you solve the problem!

  Hey mk75053,

  Scanning to memory card has the parameters of resolution through the front because that is the only way for the device perform this type of analysis.  However, to change the resolution settings for the Scan of the computer, one will have to perform scans through the software installed on the PC.

  I have all three types of 8600 models where I am located (base, more high quality) and of all printers simply ask to start the analysis after selecting the scan type.

  I hope this helps.

• HP Officejet Pro 8600: 8600 display incorrect time

  My HP Officejet Pro 8600 is showing the time correctly.  How can I fix it?

  Hello

  Thank you for using the forum.

  Below are the steps to set the Date and time for your device:

  1. On the Control Panel, press the right arrow button and then press Setup.

• HP Officejet Pro 8600

  We bought a HP Officejet Pro 8600 a year ago and set up two laptops and a desktop computer to print to it. For the past 6 months my laptop was unable to print to it. We have tried re adding to my laptop but it says that the printer is not found. Help, please

  Hi hybrid17, can you confirm for me that only laptops has problems of wireless printing to the 8600 Pro JO? If so, you could check to make sure that the IP address of the printer is correct in the printer on the computer software laptop problem. To do this first check the IP address of the printer by pressing the icon on the front panel of the printer wireless and noting the displayed IP address (you can also print a wireless network Test report to get this value). Then go to the IP address of start - all programs - < model printer > HP - HP - update. If the address displayed as the "previous IP address" is different from the one that you noted from the front panel of the printer you need to update it in the software so that they are the same.

  Hope this information helps, good luck.

  Arkle1

• OfficeJet pro 8600: printer works fine, but the software is not

  Printer works fine.

  However, the HP support the program "HP OfficeJet Pro 8600" will not start. I can see it in the HP folder under all programs, but clicking on the program name has no effect. The program name poins to "C:\Program HP HP Officejet Pro 8600\Bin\HP Officejet Pro 8600.exe" - UDCDevicePage Start

  In addition, in devices and printers in Control Panel, the printer connected displays. By double clicking on the icon takes me to...

  

  Opening HP All - in - One Printer Remote takes me to the window right... but the printer shows offline, and the various functions (scan, fax, etc.) are not available. (As noted, the printer is currently online, and I can print correctly.

  Connection to the wireless printer.

  All these functions work fine if I call them from the physical control on the front of the printer Panel.

  I don't know if these are two separate issues, or the two aspects of the same problem.

  Any thoughts?

  Thank you.

  Hello

  Try to install the following hotfix, then try to open the HP Officejet Pro 8600 software:

  http://support.HP.com/us-en/document/c03640384

  You can see any difference?

• Connected HP OfficeJet Pro 8600 Plus status reads "problem with printer."

  I could just ePrint on an OfficeJet Pro 8600 Plus replacement and them have not used for printing yet. I was in the devices page to manage the settings and change an address for one of my devices. The newly added column 8600 State reads 'Online', but also 'problem with printer '. Instructions I was referring to the display panel of the unit for Outlook2003 on the given problem. A check of the display surface showed no information, just a typical home screen. I checked through the display print and found no problems-all functionality is enabled and fully functioning. I checked then the functions of printer in the window 'Printers and devices' of all computers (all running Windows 7 Professional) on the office network. The 8600 are active and full functionality works correctly between the printer and all the computers.

  I then close the printer 8600, left for several minutes, and then lit it back and reconnected. The State says 'Problem with printer' remains in the device window HP.

  I am at a loss as to what this supposed problem can be and don't know what should be a next step. Does anyone have any advice or information that could help in this situation? It would be appreciated. Thanks in advance to those who could help

  HP support responded to my question by e-mail. I was told that the message 'Problem with the printer' is due to a bug in their system. Also said that as long as the status column indicates the printer is "Online" and everything else is fnctioning correctly, don't worry about this.

  I consider that a resolution of the post!

• HP Officejet Pro 8600 - impression of evil

  Hello

  I just install my new printer, the HP Officejet Pro 8600. It is configured and connected to my network. However, when I go to print a document, the 'Send Fax' window is displayed. If I cancel the window my document won't print. Can someone shed some light on what I did wrong, or what I need to do to fix?

  Thank you

  Spartan2422,

  Is the default value in the Control Panel, the devices and printers defined on theHP 8600 printer, not the Fax.

• OfficeJet Pro 8600 analysis stops at Midway

  With the help of a relatively new in Officejet Pro 8600 on my iMac with OSX Mavericks.

  Printer is set up wireless, printing works fine. Scanning did too, until yesterday.

  When I scan a document through HP application scanning, or Mac "scanner" that appears in the Printers window, the printer is now the noise, the status bar starts and then stops. It does not move. I left it like that for hours, just to see what happens, and when I come back the job has been cancelled.

  Wireless connection is obviously good, as I can print and even when scanning printer responds immediately. It just isn't really complete - or even apparently start - the scan.

  Any idea of what is the cause? It seems that this could be a faulty machine.

  Thank you!

  Hello vertov,.

  Welcome to the Forums of HP Support!

  I'm sorry to hear you're having this problem with your 8600 scanning. A quick way to determine if your printer is having a hardware problem, make a copy.

  If the printer can make a copy, it is not a problem with the hardware with the scanner from scanning. If a scan failure is present on the printer, try looking in the steps detailed here: A 'Scanner failure' Message is displayed on the printer control panel.

  Also it is better to have the printer connected to a wall outlet directly for power, this will help you understand why: issues when connected to an uninterruptible power supply/Strip/surge protector power.

  I'll come back and get your answer.

• How to set the date and time in eAiO Officejet Pro 8600?

  The printer is connected with the USB cable and the date & time display zeros. I wasn't able to find a menu option for date & time setting in the printer Panel. The user guide mentions nothing about it. How can I configure date and time?

  Hi Exxpert,

  Here is a tutorial from HP on how to set up this printer, scroll all the way down to step 9 for the date and time.

  Configuration printer Officejet Pro 8600

  I hope this helps!

• HP Officejet Pro 8600 Plus doesn\ ' impression on network t...

  Two weeks ago, I set up a HP Officejet Pro 8600 more using two USB & ethernet cable connections... Everything works very well on all devices - iPad, iPhone, MacBook Pro, Win7 desktop PC and portable Win7... until the printer goes to sleep.  We does not display every day, so it may be a few days between printing / scanning.

  As I kept an eye on to do this, it has happened twice now, it may take a few days before the printer is unresponsive.  When laptops Windows 7 need to print, the printer does not respond until what feed us the cycle.  The INVESTIGATION period has not changed on the printer and the software HP Update says that everything is up-to-date.

  From what I can tell, other devices - Win 7 Desktop, iPad, iPhone, and MacBook Pros seem to be the problem.

  Win 7 laptop 1 - connection WiFi AP w / cable for printer

  Win 7 laptop 2 - cable ethernet to AP w / cable for printer

  Win 7 Desktop - USB cable for printer

  MacBook Pro - cable ethernet to AP w / cable for printer

  iPad/iPhone - WiFi connection AP w / cable for printer

  Printer Firmware Version - CLP1CN1232AR

  Set a static IP address in the printer out of the router's DHCP range.  Use a channel wireless fixed like 1.6 or 11 never 'auto '.   Power at the same time.  Power on router wait 2 minutes.  Please turn on printer and connect.  Try now.

• How to set the Date and time on my HP Officejet Pro 8600 Plus?

  I have a HP OfficeJet Pro 8600 Plus, and I would like to know, how can I implement the time stamp that is under my printer display screen continually Jan 00 00 00:00 a.

  Thank you

  @misslady,

  HP has gone green, here's the guide you're looking for.