OfficeJet v40

Similar Questions

• OfficeJet v40: Officejet v40 error: Align page not detected

  Installed the new blk print cartridge.  "" "" Printed alignment page. "" "  Walked through the ADF page.  Receive the error msg: Align page not detected.  Have tried several times.  Also the unit unplugged/replugged.  I hit Cancel and msg say to run the alignment.  In a loop.  Has no other problems and the printer works very well so far.   Attached to an XP box.   Help!

  Hi @US76MC,

  Welcome to the Forums of HP Support!

  I understand that the alignment will not end on all-in-one printer, HP Officejet v40. I will definitely do my best to help you.

  This problem could be related to levels of ink or printer might complain that the cartridge is older. You can try to bypass the alignment process in based on Enter and Setup all the menu on the front panel of the printer.

  Here is another post related to this topic:

  Looks like your paper (also used for alignment) sensor being damaged. This majority happen usually when the lens of the sensor alignment becomes dislodged, perhaps due to a paper jam. The sensor alignment is in a small black rectangle on the right side of the cart. If the plastic lens is dislodged from the probe, he can be stuck on a few points of glue, or a new sensor can be ordered.

  Source, published by my colleague Bob Headrick.

  In addition, please see this post by my colleague DexterM, you have a misalignment?

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• SE error message: remove and check the color cartrides in HP officejet v40

  Original title: officejet v40

  Can not connect my HP officejet v40. The printer says remove and check the color cartrides I did with no resilts. Please advise me how to do nest?

  Can not connect my HP officejet v40. The printer says remove and check the color cartrides I did with no resilts. Please advise me how to do nest?

  Hey pc owners

  Contact support to the installation of their products Hewlett Packard

  Walter, the time zone traveller

• I have a HP officejet V40 and have lost the driver cd could you let me know an address where I can download a free driver for this please? thanks___Andydeee __many.,.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error
  • I have a HP officejet V40 and have lost the driver cd could you let me know an address where I can download a free driver for this please?
  • Thank you very much
  • Andydeee.,.
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://h20180.www2.HP.com/apps/lookup?h_lang=en&h_cc=us&cc=us&h_page=hpcom&lang=en&h_client=S-A-R163-1&h_pagetype=s-002&h_query=HP+OfficeJet+v40&submit.x=5&submit.y=5

  Go to the above link > click your printer model > then your particular operating system > and then the HP reading tips.

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to print on HP OfficeJet v40 for Windows 7 Pro 64-bit

  I have a HP Pavilion Elite HPE - 350 t running 64-bit Windows 7 Professional (Intel Core i7-860 CPU, 8 MB of RAM) and can't print reliably on a HP OfficeJet v40 connected via USB with the driver supplied with Windows 7.  It prints part of a page and then stops with the following error message:

  The ShopStationDocs document, held by kmr, cannot print to the HP OfficeJet V40 printer. Try printing the document again, or restart the print spooler.
  Data type: NT EMF 1,008. Spool file size in bytes: 166832. Number of bytes printed: 35736. Total number of pages in the document: 2. number of pages printed: 1. Client computer: \\KMRAHE6. Error code Win32 returned by the print processor: 2147500037. Unspecified error

  The problem has been reported in another topic on the following link, but the moderator suggested to create a new topic, that has not been done, but I do now.

  http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/6833a54c-6974-4fe9-b74c-93ed879781b0

  The printer works fine when I print using the driver provided by HP Windows XP installed in the Windows XP Mode (Windows Virtual PC), so I don't know that there is no problem with all the material involved, or the driver XP.  The problem, therefore, must be in the Windows 7 driver (maybe not limited to the 64-bit version - I have no possibility to test Windows 7 32 bit).  Several others have reported the same problem, as we see in the links below:

  OfficeJet V40 will not complete the print job - HP Support Forum's

  Driver printer HP Officejet V40 for Windows 7

  OfficeJet V40xi prints only partial pages with Windows 7 - HP Support Forum

  Just today, I added my printer to my new Dell company v40xi provided. I tried printing documents there and experienced the same partial impression others describe here. I changed the settings of the printer as zet49 tried and I was able to print a document. So far so good. Thank you.

• OfficeJet V40... XP error "Installation not taken in charge for 5.1 - 5.2" I have NEED of FULL VERSION DRIVER

  I had computer problems and had to re - install my Officejet V40.  The last time that I installed it on this computer has been a few months without any problems. Now, however, I get an Officejet V Series error message saying "Installation not supported for 5.1 - 5.2 - 5.3" and won't let me install my worm installation cd 1.  I downloaded version 3, BUT THIS DRIVER IS ONLY A PLAIN.  NO FAX, COPY No. SCAN No. I can do things to base of the printer itself, BUT really need a FULL VERSION of ike I have on CD. Why all of a sudden he allow me install on the same computer with the same Win XP?

  is there a workaround or where is a full version on the HP site?

  I dug through the HP ftp site to see if there was another version of the software, but he hasn't any other version of the software available for this printer.  If the CD supplied with the printer does not work, the only other option for the printer is the driver download of base that you have found.  I'm sorry.

• Computer laptop 32 bit Vista will not shareprint with XP Office officejet v40 printer. Help, please

  I have read forums and tried everything for 4 days without luck.

  I'm trying to print from my 32-bit vista laptop to my printer of office xp... an old officejet v40 printer.

  The office prints well on this printer from xp desktop attached and I named shared printer.  All security and firewall disabled. I started at least 20 times and have tried to install unsuccessfully

  It seems that the HP driver Web page has a driver for vista, BUT the instructions are only if you hang the printer directly with the USB... No shared networking. I always thought that you could just download the dirver to the computer and it turns when you go to install it. I made for the devil to the hook to the top of my computer vista laptop directly to the printer and it installs and works fine... BUT I want it in a network or shared... no USB.

  Also, if I go to "Add a network printer" and select the printer in office shared in the list, it will be in my control panel as a printer on my laptop, but when I hit print, I get the pop box, which allows you to set the preferences, print etc, and when I hit print again, the small pop-up box flashes on for a second that it's printing paper... but no printing. Instead of this, when go to see what happened to the list of document status, I see the State of the document listed as error - printing"

  I don't know if I have vista for this printer driver in my laptop or what? I'm totally confused by the present. I read somewhere that there is no way for a computer vista laptop to print over the network to this HP printer while the printer is connected directly to a computer running XP? Is this true?

  I rarely if ever gave to be beaten by computer problems... but this one had me done bankruptcy for the third time and about to give up. Any help would be appreciated.

  THIS TIME IT WORKED! After several months of not being able to print from my computer vista laptop for my v40 OfficeJet (which is connected to my desktop XP) I decided that I would give it one more try. I used once more Bob of the 2nd ad above, as well as suggesion Eddy's instructions to select "New Port" when you arrive at the end close to Bob's instructions. THIS TIME IT WORKED! I think I'm out track somewhere when I tried to do this several months ago. In any case, I thought that I have would expand a bit on what Bob wrote just in case there's someone that who needs a little more in detail. (For a beginner, even the smallest thing can be stumbling blocks if you have never done this kind of thing before)

  On your computer vista laptop, go to printers and Control Panel. When you click the Printers icon you can click on add printer and select Add local printer (it even if it is not a local printer, but a printer that is connected to your desktop computer in another room) Ok... Then select "Use the existing Port" LP1. Then you select your printer from the list and click on it to install the driver. I think that you then click FINISH. (No you are not really over, so don't bother is not clicking on this Test Page again). Once you click FINISH, you will automatically be on the screen that shows the printers you have installed on your laptop. for help. You will then see the the OfficeJet v40 as the printer that you just installed. Highlight and right click. Then select "Run as Administrator". That will open a submenu where you and then click Properties. Then click on Ports, Add Port. Select "Local Port" and click "New Port" (as Eddy proposed). A small screen will appear where you enter now the \\NameOfPrinterYouArePrintingTo\ShareNameOfThatPrinter once you do this and click on apply and OK, you will be brought to a final screen where you will notice that the box LP1 is more verified. Place a check mark was automatically placed in the new port that you just created above IE name\sharename.  YOUR DONE!

• OFFICEJET V40: HP OFFICEJET V40 DOES NOT PRINT THE TEST PAGE

  Printing a test page only prints the top line of the test page.

  This printer work with Windows 7 for me.

  I tried to print a document in word with the same result (only the top line of the document will be printed - and errors)

  UNINSTALLING THE SOFTWARE OF PRINTER DRIVER THROUGH THE DEVICE MANAGER SOLVES THE PROBLEM.

  I HAD TO DO SINCE THE DEVICE MANAGER - JUST REMOVE THE DEVICE FROM THE CONSOLE OF THE MACHINE

  SEEMS NOT TO DELETE THE DRIVER SOFTWARE.  AFTER RESTARTING, I RAN THE HP INSTALLATION WIZARD

  THAT FIXED THE PROBLEM AND TEST PRINT WORKS Thank YOU!

• OfficeJet v40 print partial pages

  
  

  Hello. Good news!  Any suggestions to me to be able to print full page.

  Thanks again for your help. Best regards.

  Xeno

• Office Jet V40: problem with Office Jet V40 after upgrading to 64-bit Windows 10

  I just downloaded Windows 10 64-bit on my Asus laptop and now my Jet V40 of office all-in-one printer will not work correctly.  I tried to download the new drivers for 64-bit Windows 10 several times from the driver of HP downloads site but nothing happened.  I ran the HP print and scan doctor several times and he said I had a problem of correspondence of port, but was not able to resolve the issue after I restarted my laptop.  Help, please.

  Hello @Gator44,

  Welcome to th eHP support forums.

  I appreciate that you try to connect your Officejet v40 to your computer Windows 10.

  When I studied the list of HP printers compatible for Windows 10, the v40 is there.

  HP printers - printers compatible Windows 10

  He recommends the driver from Windows Update. This means that it is is not, or should not be any driver download.

  How to install the OS in Windows and update drivers?

  Go to the HP printers - install and use the print driver built-in Windows for instructions on how to install the Windows driver for your printer and to resolve installation problems.

• How can I uninstall Lexmark 2600 printer? I can't do the action performed through site to remove from my computer

  I go to control panel, add or remove Lexmark x 2600 printer-click DELETE, nothing happens, I have IE6 on XP but use HP OfficeJet V40

  Hi Oregonian,

  1. have you tried the suggestions posted by dated me April 30, 2012?

  2. If so, what is the version of Internet Explorer installed on your computer?

  Please post back with the status of the issue to help you better.

• "The parameter is incorrect" Error Message is displayed on the computer

  I'm running Windows 7 Home Pro on an Asus laptop and recently decided to add my old printer USB, HP Oficejet v40, to our network via a print server, LPR Networking USB wireless home. The Installer seems to fill correctly, and my printer appears in the list of available network printers (I alone). However, when I try to print wireless, I get one or more error messages. The first and the most persistent are: a StartDocPrinter call was not issued. Sometimes (not always) this is accompanied by another popup error: the parameter is incorrect. In each case, the document I am trying to print is no longer in effect. My USB utility Server network sometimes prints, and sometimes it is available. Running the printer troubleshooter cannot correct the problem (s) and always results in the following error: printer HP Officejet V40-P05d0443eb can be contacted via the network. If I connect the printer directly to my laptop, USB port, it prints as expected.

  The print driver is up-to-date. I tried to uninstall and reinstall the printer and print server and have also tried to reset the print server and the router, to anything will do. Any help to fix these problems is greatly appreciated!

  Original title: error: A StartDocPrinter call was not issued.

  Hello

  Thanks for posting your query in Microsoft Community.

   

  You can consult the following articles and check if they help:

  Wireless printing Center Resolution of problems
  http://WWW8.HP.com/us/en/campaigns/wireless-printing-Center/Troubleshooting.html
   
  "The parameter is incorrect" Error Message is displayed on the computer
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c03283238

  For the error: "the printer cannot be contacted over the network",
  refer to suggestions provided by Meghmala responded on May 28, 2010.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/printer-cannot-be-contacted-over-the-network-error/a4318308-3D16-44D4-bac8-7fdd10a83208
   
  Hope this solves the problem. If the problem persists, you can write back to us and we will be happy to help you further.

• HP OfficeJet Pro scan is no longer with Sierra

  I am running OS X Sierra on 2012 MBA with an HP OfficeJet Pro 8600 printer / scanner.

  I noticed that after the upgrade to Sierra that the scan function no longer works... I tried to uninstall / reinstall the device, but the problem continues... I have checked the Apple Web site and notice that the HP OfficeJet 8600 is listed as a compatible scanner.

  I note also that the 8600 OfficeJet is connected as a printer via WiFi network and worked perfectly with the captain.

  With:

  1 has anyone else experienced this problem?

  2. What if anyone has found a solution / workaround?

  TIA,

  Joel

  responsibility to provide drivers to work for an update of the OS is with the developer of this device, not Apple. visit the page of the developer for your make and model camera and see if they offer drivers, otherwise contact the developers. Apple will sometimes provide printer drivers, but if a device is a legacy printer the developer may choose to retire it from use.

• Using the function of scan macOS Sierra HP Officejet 7300 series network printer does not work; He had no problem with El Capitan...

  Printer HP Officejet 7300 network series that allows to work flawlessly with El Capitan does not work after the upgrade to Sierra.

  With macOS Sierra, when used as a network print service printer works fine however scan does not work. Programs like the Image Capture, HP Easy Scan etc does not see the printer. However, if the printer is directly connected to the Macbook Pro using the usb cable, a new printer is added to the list of printers (it shows print and scan functions while the printer network in the list shows only printing function) and the scanner works well with Image Capture, etc. If the usb cable is removed disconnects this printer in the list and there is no way to turn it on. I have the latest update for the printer installed from the App store. It looks like a driver issue, but I wonder if there is a work around for this problem...

  Open Preview.app. Under file in the menu bar, you see import of 'name of your scanner?

• need to find software to download HP Officejet 6500 more e-All-in-One-E710n-z a

  HP does not print. called apple support and deleted driver. now I'm unable to find the driver to download on iMac there.

  HP Officejet 6500 more e-All-in-One-E710n-z a

  Help, please

  Thanks marianne

  You need to access the support Web site HP and search for a driver for your printer, then download it from here.