Offset of DirectX 10 problem mouse

Similar Questions

• Problems mouse while playing games.

  I used to run windows vista 64 bit home premium on this laptop, but since the upgrade to windows 7 64 home premium, I noticed problems with my mouse.  Especially while I am playing a game, he will have those moments where the mouse will become either completely insensitive, or so that I'll have ((usually in first person games)) that it will look like my screens clipping horribly, I can't control it.  It tends to occur every 2 to 3 minutes or so, it's very consistent, but it only lasts for about 3 or 4 seconds.  Even in this small window that happens however, it ruins everything I do right now, it's extremely frustrating.  If anyone else has had this problem or is anyone know what I can do to fix this problem?  Thank you.

  Try to install the update of DirectX from here: http://www.microsoft.com/downloads/details.aspx?FamilyId=2DA43D38-DB71-4C1B-BC6A-9B6652CD92A3&displaylang=en

• problem mouse USB

  Hello

  I bought Tohsiba satellite a50-106.

  for this model, I bought the optical mouse A4 Tech AK-5, but after you have connected to comp, it doesn't.
  technicly mouse it's ok, I checked on my desk.

  After connection to the optical sensor usb in the mouse does not light, but there is new message device to find, then comes another message, which is device may not work correctly. Does not install the mouse drivers.

  When I get out the slot usb mouse comes another problem. USB slot is inactive (not see). When I connect diferent peripheral (floppy drive) system not to see too.

  I need to uninstall & then install the drivers for the usb hub.

  If any 1 know whwt 2 so that the work of memo please help me.

  Hello

  Do you have a few with this mouse driver CD? You have the same problem with all three USB ports? Can you also check the BIOS settings if there is option called the pointing device settings. There are a few options. You can change it with the space bar. I don't know, but there must be option called simultaneous or something like that.

• connection problems mouse Apple

  I have connection problems and keeping a Bluetooth connection between my mac mouse for my laptop.

  Try resetting the PRAM and SMC.

  Barry

• Frequency problem mouse Microsoft X 8 gaming

  I have three computers on a network in my basement and recently updated all three to the x 8 mouse. Two have Vista and XP. The problem I have is when playing fps the clicks of other X 8 mouse are playing games with them. My question is... Is it possible that all three can also be defined on different frequencies for don't mess does not with each other?

  Any help would be appreciated.

  Doug

  Hi ddallas159,

  According to the Microsoft Hardware site, the Sidewinder x 8 is 2.4 Ghz, and there is no way to select a different frequency. You may need to replace it with a couple other mice for your application.

  Here is the link to the datasheet:

  http://www.Microsoft.com/hardware/gaming/ProductDetails.aspx?pid=103&active_tab=systemRequirements
  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• DirectX / 3d problem acceleration

  Hello.

  I just installed the 64-bit Windows 7 RC and it works without problems. But when I tried to run the Command & Conquer: Tiberium wars, I've faced the following error (roughly speaking, quoting from memory, but you get the idea. If all goes well...) : "cannot detect Directx 9.0. Please make sure that you have installed. I had a similar problem with Neverwinter Nights 2. The error message was (even once about) "could not detect hardware acceleration.

  I installed the latest drivers (Catalyst 9.5 for Windows 7 64-bit) and information system shows material correctly and in dxdiag, my version of directx is DX 11. I have two 4850 s ATI HD crossfirex. If everything seems to be fine.

  I also tried to run in administrator mode and compatibility mode (does not solve the problem).

  If no additional information is required I'll provide (I'll have the exact error messages later today). Later today, I will try to reinstall the drivers and see if that helps.

  Any help is appreciated. Thank you.

  Hi SampoS,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is due to a problem with advanced user and would be better suited to the Windows 7 Technet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro?ITPID=sprblog

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• DirectX 9 problem, 64-bit.

  original title: directx 9, 64 - bit problem.

  Hi maleris1234,

  Follow these methods.

  Method 1: Follow the steps in the article.

  How to download and install DirectX

  http://support.Microsoft.com/kb/179113

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Perform a disk cleanup to remove unwanted files.

  Description of the tool in Windows XP disk cleanup

  http://support.Microsoft.com/kb/310312

• Device problem mouse Unreconginized

  I have a USB mouse problem, when I try to connect a mouse to my laptop Dell Inspiron 1525. I have Windows Vista and my mouse to work on this laptop, but all of a sudden it just stop working and I don't know what happened and I need all the help I can get to resolove the issue as soon as possible... When I connect the mouse he said peripheral unrecongnized then I reinstall the driver using Windows Update and search for my computer, and then, it comes to the screen "Windows has encountered a problem installing software driver for your device...".  It says USB browser mouse fill is missing a necessary entry and perhaps because of the file INF written for windows 95 or later. The mouse worked over a long period and then as a year ago it stop working and I don't know what's the problem with him and I tried almost every troubleshooting tip that was on the computer and I don't seem to be getting anywhere, so if someone could please help me with this I would be very appreicate it.

  Mouse drivers are included in Windows, you can try to run the System File Checker if you haven't tried:

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files
  http://support.Microsoft.com/kb/929833#Method1

  After you run the SFC, go into Device Manager and uninstall the mouse (unknown device), restart it should reinstall automatically.

  If that doesn't work, try a manual update. Go to Device Manager, right click on the mouse which can be listed as unknown device with an exclamation that is yellow in front of him, and then click Properties, on the mouse properties, click the driver tab, click Update driver... Under "How do you find this driver" click "Browse my computer for driver software", then instead of navigation click on "Let Me pick from a list of drivers for devices on my computer," click "Next", check the box before "Show compatible hardware", select 'mouse HID-compliant', click 'Next' and complete the wizard. If something as "the best driver is already installed" is displayed just repeat the steps.

  Another way to manual installation on this thread of 'Talador.
  http://forums.techguy.org/Windows-Vista/549988-solved-chic-other-hardware-USB.html

• 2 problems that occurred at the same time - shift key & problem mouse

  I copied and pasted an email address into a new email.  Now, whenever I press the SHIFT key, it copies the same thing several times in the format of electronic mail and WORD.

  In addition, my mouse now I cannot hold the left key to highlight words.  Nothing happens.

  any suggestions are greatly appreciated.

  Thank you

  Hello

  
  1. What is the number of brands and models of mouse and keyboard?
  2. were there any changes (hardware or software) to the computer before the show?
  
  Perform operations by the items listed below and see if the problem persists.
  http://support.Microsoft.com/kb/258826
  http://support.Microsoft.com/kb/303091
   
  Note: Proceed as if you are using a Microsoft Keyboard and mouse.
  
  Hope this information helps.

• Problem mouse Touchpad

  The touchpad on my laptop mouse does not suddenly scroll more; in other words, when I touch on the sides, all that I am to-Web page, document, whatever either - does not move upwards or downwards, a when I touch on the bottom, nothing moves side to side as it should. He is still able to respond when I touch to move the pointer and click with a tap.

  Also, the touchpad icon in the taskbar does not display that it is picking up anything when I touch, even for just moving the mouse or clicking on it.

  WHA'sup with that? How can I fix?

  Try a system restore to fix it.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Major problems mouse, left click acting as a click right, very annoying!

  Hey guys I have a very annoying problem. I read about it online as other people seem to have made the experience, but there is no real definitive answer. On rare occasions, my mouse will be funny. When you press the left button, it will act as the right and the right button will continue to act as the right one. When you go into the settings of the mouse, even if swap you them around her still acts as if there are two right click and left click No button. I tried a number of suggestions elsewhere on the web, including re-starting my pc several times, trying to update windows, turning off the mouse, re - install, using a different mouse etc... No matter what I do, the problem persists.

  The only way to get the return to normal of the mouse is either to turn off the pc and leave it a few hours, in which case even sometimes that does not work. The only other time he rectified himself is in itself. Sometimes it will just fix itself without doing you anything for her.

  I'll be very grateful for any advice that anyone can give. Does anyone else have this problem? Anyone know anything on this subject? Thank you

  BTW my system info: Windows 7 Ultimate 64-bit, processor AMD Athlon X 2 2.2 GHz, 4 GB Ram, disks of XFX - MI-A78U-8309 M/B, a few SATA, Logitech MK300 wireless K/Board of Directors and the mouse.

  Salvation;

  Can you go start\control configuration\systeme and security\Administrator Tools\Event Viewer

  Please check if you have any error in Applications

  as to publish here or visit our website with the error number to search for

  Thank you.

• DirectX 11 problems when you try to play some computer games - need to replace it with an older version?

  Running Win7 x 64 home.

  I have multiple problems of game about Dx11.
  EverQuest Games Inc., World of Warcraft, Doom3, Farcry, Alien Vs Predator 2 (former), Counterstrike and a crowd of older games!
  I read the other messages and responses (those who responded, I noticed a large number of messages without response on this topic too)
  All the responses suggest that it is a hardware problem or win7 compatibility... This isn't the case, I know exactly what the question! its Dx11 causing these problems!
  With respect, that I don't have 20 questions about what errors im getting, im of hardware running, which grows with the im... They ALL find out 100%, all I want to do is go back to an older version of directx 9 c preference!
  I know that this is the problem I checked the logs of the accident and took notes, errors, and they are the same for the same problem, I got on a Vista machine, which resolved when I restored to before the service pack!
  I tried to use the web installer in accordance with another similar position and it will not be installed because I get the message "you have a newer version already installed etc.."
  I also tried to change the compatibility to the game settings but this obviously does not work either because he still uses Dx11.

  ----------------

• Wheel problem mouse MS 3500

  Hello...

  Normally I press and release the wheel and the following would happen:

  A symbol on the screen (a circle with one to the top and down arrow) appears. I could then move the mouse to scroll quickly without pressing another part of the mouse.

  Now, nothing happens when I press the mouse wheel.

  I've uninstalled and reinstalled the driver and check for updates. Changed the battery. Did not help.  I tried an older mouse as I still possess and the function wheel has functioned well.

  Any suggestion would be appreciated.

  Thanks in advance.

  «tried an older mouse as I still possess and the function wheel has functioned well.»

  This should indicate that the key to wheel on the mouse with a problem no longer works.

  New audit could be trying the mouse on another machine if possible.

  .

• Problems mouse on Windows 7.

  Original title: When I interact with anything on my desk with my mouse it glitches and sometimes it will not highlight, other times it will change the scaling of the window. I don't KNOW what could be the cause.

  So, I recently had to reinstall windows because of a problem I had with some software, I have completely reformatted the hard drive prior to installation. I don't know exactly how to describe this problem, but all the mouse comes in contact with the seeds and the causes of the problems, including the games. Which is what this computer was initially intend to do. Without the ability to play without glitches I can play as well on my laptop. Please help me.

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• DirectX 11 problem

  I've always had problems with DirectX 11 when playing games (Crysis 2, ACIII) and have always used DX9 or 10 (which works fine).  I ran the benchmark Heaven and produced the two images at the end.  Do you have any idea what it would cause (or even what I would call the question so I can look for it online)?

  The question is interlaced squares (like a checkerboard) of the normal scene and black.  Dark jitters autour squares 'bad '.  At first I thought it might be a matter of shader because places were evenly distributed throughout the entire viewing area, but maybe his problem with textures as the various elements of the scene are not the problem.

  Image links:

  http://PostImage.org/image/6xnwjmf7t/1ab07697/

  http://PostImage.org/image/8czl2dy0v/dc0e6a79/

  http://PostImage.org/image/473n069qn/ebac6f40/

  Video link:

  http://youtu.be/O7DyLWzV-GM

  I'm running Win7 x 64 and DxDiag has no problem.  I downloaded DirectX Setup, and it complements very well.  I tried to install the DirectX SDK and it fails without any useful error.  Normally I just to uninstall DirectX and reinstall, but yall it baked into the OS :(

  ------------------------------------------------------------------------------------------------------------------

  System Specs:

  Operating system: Windows 7 Ultimate 64 - bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130104) - 1431
  Processor: AMD Athlon (TM) II X 4 955 processor (4 CPUs), ~3.2GHz
  Memory: RAM 8192MB
  DirectX version: DirectX 11
  DX setup parameters: not found
  DxDiag Version: 6.01.7601.17514 32 bit Unicode
  Card name: ATI Radeon HD 5800 series
  Manufacturer: Advanced Micro Devices, Inc.
  Track type: processor AMD Radeon Graphics (0 x 6899)
  DAC type: DAC (400 MHz) internal
  Memory display: 755 MB
  Dedicated memory: 1012 MB
  Shared memory: 3839 MB
  Current mode: 1920 x 1080 (32 bit) (60 Hz)
  Output type: HDMI
  The driver file version: 8.17.0010.1172 (English)
  Driver version: 9.12.0.0
  DDI version: 11
  D3d9 Overlay: Unsupported
  DXVA-HD: not supported
  DDraw status: enabled
  D3D status: enabled
  AGP status: enabled

  Driver package version: 9.012 - 121219 a-152192C-ATI
  Catalyst Version: 13.1
  Supplier: Advanced Micro Devices, Inc.
  The 2D driver version: 8.01.01.1278
  Direct3D Version: 9.14.10.0945
  OpenGL Version: 6.14.10.12002

  • Graphics card: SAPPHIRE Radeon HD 5850
  • Motherboard: ASUS Crosshair IV Formula
  • Power supply: Antec TruePower 750W
  • RAM: 2GBx2 Ballistix 2 x (total 8 gigs)
  • Processor: AMD Phenom II X 4 955

  Nothing is Overclocked.  No error in DxDiag.

  "remarkable search-fu."

  lol - I do not visit the ATI forum much immediately. I am only using an ATI card for three months.
  Especially here and Nvidia. Just a coincidence that I stopped there earlier.
  Jose my first ATI card in about six/seven years (HD7970). I went to Nvidia after a borked 1950XT, but not only because of this. More that Nvidia had the good card at the right price at the time.
  I was going to get a 5850 on a new machine + two years back, but when I was shopping there was a shortage of big two mfg gpu so I had to settle on the least - GTX260.
  This machine - Phenom II 965, now has a GTX560ti.

  "I'll have to spring for a new card."
  With the games you are looking to play in my opinion - Yes.
  Not necessarily because of pixelation.  I don't think that that should normally be the case
  just because of the additional constraint of the use of DX11, but due to the overall requirements of the games
  you play, assuming you like max eye candy.
  5850 ability to use DX11 would not always result in the ability to push everything,
  and the latest maps are a good step upward. Use less energy and create less heat too.

  Apparently, you can get the new key Bioshock and 3 Crysis with ATI and Nvidia more in the USA.
  No luck here in the 'chance', no, (Oz) - low countries!
  .