OID/DIP 11.1.1.7 - errors of inaccessible and consistent of the Agent in the newspapers

Similar Questions

• I cannot install the suite Criative cloud reinstall every time, she told me that gave the error in installation and transferred me the site of re - download the creative cloud. Can you help me?

  I cannot install the suite Criative cloud reinstall every time, she told me that gave the error in installation and transferred me the site of re - download the creative cloud. Can you help me?

  uninstall all cc (if nothing is installed) by using the adobe uninstaller programs.

  clean through the use of the Adobe Creative Cloud cleaning tool to solve installation problems

  Restart your computer, and then install, https://creative.adobe.com/products/creative-cloud

  Use the desktop application to install your programs of cc.

• Satellite L850 - error of cooling and slow down the speed of the CPU even when fan to 80 c

  So, I have this problem that my fan stops turning when the system is under load and then turns on, starts running at the speed of 100%, an error which says error with cooling system, laptop computer back to the service.

  The fan slows even when the laptop cools completely, it only returns to normal speeds once I closed the laptop.

  In the last few days, which has stopped completely. Now the fan won't even middle speeds even though the CPU temperature is 80 C. Due to the bad news of cooling time score about 70 ° C, even at idle.

  The laptop is almost a year. I already had this problem after a week of buying it, and they replaced my processor. I have windows 7 x 64, amd 7670 m and 2350 m i3.

  I wonder if this may be a BIOS problem or I have to take for the service? How can I stop this from happening? And Yes, my power plan is on high performance.

  AFAIK the cooling fan is controlled automatically if you don t have a any influence on it. Temperature sensors are placed on the motherboard and they control the cooling fan activity. That one possibility to change fan cooling activity is to change the option in the option of cooling method (advanced power settings > Toshiba saving settings).

  In my opinion the best solution for you is to contact the nearest Toshiba service provider and ask for help.
  They have diagnostic tools that you can check all this.

• Error code: 1722 and 1603 when the Installation of FSX

  I recently had the opportunity to uninstall FSX and trying to re - install the error messages above were almost at the end of the installation.  Since then, I installed FSX demo version without problem and tried to re - install the full version of FSX with the same result.  I use Windows 7 Premium.  I also ran FS2004 without problem.  Please notify.

  I have found the answer! I chatted with Microsoft technical support. Try this:

  When you try the knowledge base article, you will need to run as administrator command prompt.
  I took my computer would do that since there is only one account of user and it's me, running as administrator.
  This does not work with the command prompt.
  Then...
  When you go to start-> Accessories, do a right-click on the command prompt and "run as Administrator"
  Now follow the rest of the article in the knowledge base, and she must remove the token.
  Reinstall and voila!

  Good luck!

• Why this error is coming and what is the reason because I have to tell my friend to not next time

  Generic Host Process for Win32 Services has encountered a problem and needs to close.  We are sorry for the inconvenience.

  Despite my drive HARD (C) this formatting error is still popping up. Only now its worse the machine hangs after some time and I can not work. In fact even the click of the mouse does not work and I have invariabley have to restart using the button on the Cabinet

  Please let me know how this accoured error in my computer & what could be the reason.

  Hello

  Follow these steps and check if the problem persists.

  Step 1:

  There are a few things that could cause this problem, since it is a generic error that does not necessarily indicate a problem. This could be a driver problem or a problem with a program, spyware issue or a virus.

  "A supported fix is available from Microsoft. For Windows XP SP2, the generic host process error can potentially occur on any system at any time. Even if you receive the error message shortly after starting the system, the error occurred during system shutdown before. Because of the magnitude of this problem, this fix was made available through Windows Update and distributed to users with automatic updates enabled to eliminate this problem on Windows XP SP2 systems. For Windows XP SP2, you may experience a last Generic Host Process error to restart after you install this hotfix. It's the system shutdown before the end of the installation of the new version. »

  -Microsoft database

  install the file following, then restart the system:

  http://www.Microsoft.com/downloads/Detal

  Be sure to keep your operating system updated by installing the updates from Microsoft.

  Step 2:

  If this does not resolve the issue, I would recommend that you run a full scan using the Microsoft Safety Scanner and check if the problem is related to malicious software.

  Note: You may lose your data while eliminating malware.

• Missing Windows Installer, updates are back with the error Code 80070641 and 641 of the Code

  My count started with windows update issues. My updates come back with Code and 80070641 Code error 641But when I went to check my windows installer, I couldn't find the file. I tried to restore before I had the problem with no luck. Also, I tried a lot of wany to try to find the file. Any suggestions?

  See the RESPONSE message in this thread-online http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/error-codes-641-and-80070641-net-frame-sp1/874c45b5-9446-457a-b0f1-44bbbcdb8517

• Two questions - cannot save the printer shares with the error code 0x000006d9 and part of the Machine is not accessible from the network of working groups

  I think this are problems, but here is the separately questions, first of all - the basics:

  4 PC network using the working group with two Windows 7 (ultimate) and two xp.  Everything worked fine with the a previous vista / xp 3 network.  All except the Windows 7 Desktop behave well. The network is connected with a modem cable to a 5XT netscreen NS (firewall hardware to the outside and the inside hub), a netgear wireless access point and Windows workgroup use (as mentioned above).  Name all is correct on all machines, all the discovery settings are in place and each has Norton Internet security for its local protection services. Upgrades of Windows 7 have been computer vista laptop connected wireless and wired desktop previously running XP Professional sp3.  XP conversion was assisted on the desktop of the wizard upgrade Laplink PC Mover.  Applications executed in appearance on the two level computers.

  On the desktop - I can't share printers. When I use "networks and printers" in the start menu to share on a printer I get code 0x000006d9 error saying something like the configuration cannot be saved.  All local jobs printing works well.

  On the desktop - the name of the computer records also of all as on the network (it is discovered and mapped by each PC) but when I try to access it from any other machine I get a general error says something like "check your spelling of the name mannequin." This desktop computer Win 7 can browse shared folders on the network of and write about everything.  Somewhat added data - this device can ping all others in the network sucessfully but none get a ping successfully into the offending machine either with ip address or computer name (times out waiting for a response or said the name is not found).  He himself can ping successfully.  It accesses the internet very high hand.

  Solutions have been attempted without a firewall (Firewall Norton Smart Internet - 2010), with the firewall and various changes to authorization.  A final discovery was that Windows Firewall will not allow because BFE is not able to start - error 5 - access denied (this was discovered by train to allow a possible solution because of some internet chatter that the Windows Firewall must be running to implement shared printers).  All other dependencies are running to get a break on why BFE is not (it turns on the Win 7 laptop as well as the firewall).  Authorizations have been verified in the registry for settings of firewall and BFE (ports, permits, etc.) have also been looked at with a very critical eye.  SFC has been run with no problem.  All ports for net drivers, Win 7 networking and other actions are open in the firewall.

  Then people - I did some internet research and I tried a lot of suggested solutions nothing doesn't.  My apologies in advance if a person provides a solution and I say "tried".  Any help is very appreciated

  You can mark this as resolved problem!
  The program involved, causing this error is firewall Windows, here is what you need to do to fix this...
  If like me you have disabled windows firewall, I use Security Suite of ZoneAlarm, you will need to re-enable the firewall to share the printer.

  If you have disabled or turned off the Windows Firewall. (and in my case this error was caused by exactly that)
  Step #1 - disable any other firewall can be installed. Stop to load at startup and restart your PC.

  Step #2 - go to the tools of Admin folder > Services > Windows Firewall > double click and is it set to manual or automatic and keep it.

  Step #3 - open Control Panel > system & security > Windows Firewall > enable or disable the Windows Firewall > (Enable) turn on the Windows Firewall > save
  Then go to Restore Defaults > click on restore default button > save
  (you only do this IF you have changed the settings of the firewall, but it is always a good idea and will ensure that there are no problems during the proceeding)

  Step #4 - click Control Panel Home > view devices & Printers > Select / click on your printer > screen printer properties > share > share this printer > OK

  Step #5 - go back to firewall Windows and the tower he walks back > save

  Step #6 - go back to Services > and the Manual value Windows Firewall (or turn it off if you want, I recommend the manual)

  Step #7 - reboot and re-enable your firewall preferred to start at startup > Reboot

  Step #8 - take a deep breath and sigh of relief! :)

• [HELP] NOR error of MAX and locking of the...

  I have a NI SMU 1062 q and NI SMU 8135.  Windows 7 Professional 64 bit installed.

  I removed all the software OR using the control panel and then installed NI Developer Suite 2012. As part of the installation, the following has been installed:

  NEITHER Developer Suite Core

  Option deployment on FPGA (excluding the Compilation of Xilinx 10.1 Tools)

  Automated Test option

  I2C & SPI

  NOR Serial + VISA

  When I start OR it MAX errors with an exception. If I keep it then crashes. All menus are gray! He worked (with error), but now it crashes completely.

  I have attached the dump file and log.

  Also in the basket are:

  PXI-6509 DIO card

  PXI-7953R + 5734R DAQ + FPGA

  Controller USB CB2-1-PIPE

  PXI-2503 switch

  PXI-4070 DMM

  OR PXI-8430/4 RS - 232 card

  It worked in the end.

  The PXI chassis came pre-installed with a few cards that we had ordered. I think that NEITHER installed the drivers for these cards (probably more by 2012). Then, I removed all the software OR in the Panel and installed NI Developer Suite 2012. I think the drivers clashed. I did a restore complete system image to disk and re-installed NI Developer Suite 2012 and it was fine.

• I get 0009C error 48 code and cannot solve the problem?

  This problem has occurred continuously for more than a year. Don't know what that means. Impossible to find similar problem is your forum.

  When you get this error?

• Get error 80072745 code and cannot access the Messenger. All solutions

  My question is simple... I can't access Messenger, either through my account or web access.  I either get error 80072745 or I see loading forever program.  I can't even to check the options or paly with parameters.

  Hello

  they will help you with your questions/problems Messenger when repost you the link below in the Messenger forums

  http://windowslivehelp.com/product.aspx?ProductID=2

• Crash of Vista, graphic error, green lines and broken at the start lines.

  OK, maybe complicated I don't know.

  Occasional at startup, my screen will be covered in white or green lines and will prevent windows to start so I have to manually turn my pc and turn it on again.

  At first, it was just a problem visually but now its my PC randomly crash. The dotted green line will suddenly appear all over screen of, freeze my PC and I have to restart again.

  It's random, it is not the case whenever I turn on the PC but when it does it is a pain.

  Any information you can give me would be great

  Here is a picture to help identify what I will speak about.

  http://uploadpic.org/view-PIC.php?IMG=93670

  See you soon

  Hello, daz18

  This seems to be either a driver, or more likely a hardware problem. Errors that distort the screen you describe is extremely rare with only software.

  Check with the manufacturer and make sure that you have the latest video drivers for your computer.

  Try to run the memory diagnostics tool: click Start, type memory in the search box and open the Diagnostic tool memory and choose whether you want to restart now or later. After the restart of the tool must be running and then windows starts to tell whether or not it finds problems.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer has sometimes get stopped working and gives message windows explore is restarted, what type of error is this and what is the solution for this?

  my title is best question exlpanation

  Hi risacond,

  Thanks for posting your query in Microsoft Community.

  I understand from the information you have provided to us, you are facing problems with Windows Explorer.

  I will certainly help you in this matter.

  Follow the steps in the link.

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  If you face problems more when working with Windows Mail on the Microsoft Community Forum.

• Error 0x80072efd, 80070005 and 800F0922 during the installation of Windows update.

  Original title: impossible to install the latest updates of Windows 8 or access certain applications

  I got my Lenovo Y50 for a month or less. I'm happy with it, but recently I went to open the app store and receive 0x80072efd error message. I did a lot of research on these subjects and tried many things before asking my question, so here's what I know:

  It seems than most of my other applications that require an internet connection doesn't work-weather, hightail, Bing news - but Internet Explorer only and all programs of office work.

  I'm on Steam frequently and recently I get error code-138 on any page other than my inventory, but I can access my account and the information very well on a browser. I guess that this is related to my network problems.

  I have downloaded and run software troubleshooting twice and failed twice.

  When I went to update my story, I found that all my automatic updates didn't start a week ago. I did a manual update and got the 80070005 error messages and 800F0922.

  I thought that my PC had been updated when I stopped it, because he used "Please do not stop your computer while it is up to date...". 1 of 12 "routine. I thought that the problem could be that I had not all bleached programs, so I closed all the possible applications and restarted. He said, it has been updated as usual, but when I went back to my history of editing, he always showed he didn't.

  I made sure my firewall was not blocking applications or software update. I made sure that I have an internet connection. I did so that I do not use a manual proxy configuration. I made sure my Microsoft account is verified. I even ran a code a few people posted on another thread. I think the only thing I didn't try was temporarily disable my firewall. I'm sorry to start a new thread about this, but I have not had much luck fixing the problem.

  Hello

  I appreciate the efforts to try to solve the problem. Please write us with the following details.

  Your computer is on a domain or network?

  The code error 0x80072efd indicates interruption between your computer and the Windows Update server. I suggest you follow the steps below, check if it helps.

  Windows Update error 0x80072efd

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-Error-0x80072EFD

  For error 80070005 and 800F0922 I suggest you to follow the steps in the link below and check if it helps.

   

  Error 0 x 80070005 in Windows Update when you try to install updates

   

  http://support.Microsoft.com/kb/968003

  Windows Update error 800F0922

  http://social.technet.Microsoft.com/forums/Windows/en-us/e5c6b0b8-9e32-4B10-9986-87d35174ca6f/Windows-Update-error-800f0922?Forum=w8itprogeneral

  Write to us at the State of the question. We will help you.

• Build error iOS with no info in the newspapers

  I make a version error iOS app identifier: 69203. This is my first attempt at a version of iOS, Android version works with success.

  I have correctly installed the provisioning profile and p12 and unlocked the key but the build gives an error and doesn't show anything in the logs to indicate what error.

  I have re-uploaded the provisioning/p12 just to be sure that they are up-to-date. Is there anyway to get more information on what could be the cause of the error?

  Thank you

  Malcolm

  This should now be fixed, you can try the building with the last cli - 6.3.0.

• I get the error code 204 and cannot install the creative cloud. Need help!

  Currently, I'm trying to install the creative cloud but error: 204 keeps popping up stating «It seems to be a problem of access to a critical file for download...» »

  Can someone help me?

  Thank you

  For this a little late but I just had this problem and it was my malware program which was causing the problem. Just turn it off and it works perfectly.