OID to display clients connected to AP
Hello, can anyone help me or know an implementation of an OID to display the number of clients connected through an Access Point? I use a WLC 5508
Thank you
+ 5 to solve your problem
Sent by Cisco Support technique iPad App
Tags: Cisco Wireless
Similar Questions
-
'Require SSL for client connections and Administrator display.
Whence him 'require SSL for client connections and Administrator display' option under Display Configuration > global settings go into View 5.1? I don't see this because I do not have the right license or move it elsewhere?
According to the documentation of view 5.0 (http://pubs.vmware.com/view-50/index.jsp?topic=/com.vmware.view.installation.doc/GUID-5706AA18-795A-4575-96EF-98CA3E19228C.html), the option should always be there.
Thank you!
In the login server access configuration display: > servers > server connection > edit one of the servers, and you should see the optoins
-
My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me
Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.
Where do you have the phone first?
-
I forgot my password and got my iphone disabled after several attempts. its display to connect to itunes, but I am unable to connect to itunes too. How can I unlock my phone without losing any data? Help, please
In short - you can't
IF you have a computer with iTunes on which you did a prior backup - the phone will be recognized and iTunes offer todo backup before it clears your device - that - except if you know the access code the content cannot be saved
-
Satellite A200 - 23 k - view corruption during outdoor display is connected
HY everybody :)
If this problem occurs in 95% of the time when the external display is connected. Picture looks like it has some artifacts and color everything is blurred. ATI tools does not detect objects, and the system reboot or wake after sleep "solve" the problem.
BIOS is the last, ram has been upgraded from 1 to 2 GB, there is no difference which is the OS or drivers are used (official or modded).EDIT: Not long ago I started playing battlefield2 and this happens often in this game, but in no other (HAWX for example)
Edit2: this display corruption occurs only on the main screen, never on external.So any ideas on how to solve this problem?
Thank you!!.
.
Hi Triu,
you have changed the configuration of the internal display device?
If you are exceeding the refresh rate of the strange things happen...
Please try and use the driver from toshiba with the standard settings to test the system. -
When I try to open my homepage from Yahoo using Firefox I get a panel display message 'connection to the server was reset while the page is loading. Try again "#".
Cure please!Do you find it with other browsers?
If not, then try asking using Firefox for a.
That you get with other sites with Firefox?
-
IPSec tunnel between a client connection mobility and WRV200
Someone has set up an IPSec tunnel between a client connection mobility and WRV200? I can't get the right configuration.
Agitation, these products are treated by the Cisco Small Business support community. Please refer to the URL: https://supportforums.cisco.com/community/netpro/small-business
-
No external display is connected?
I tried to reach my dell inspiron 1545 to an external monitor, my tv using a HDMI VGA cable. But it just says: no external display is connected, I tried changing the settings I think but nothing seems to help. I tried to go the windows Mobility Center to connect it but it still says the same thing. Is there something I can do?
Thank you very much
Here is an article on how to connect a laptop to a TV that focuses on the proper cables and runing (I don't see one that you use mentoned, but which means not necessarily that it's the wrong cable - maybe it's just that the article did not consider such a cable when it was written): http://www.geekwithlaptop.com/how-to-connect-laptop-to-tv.
Here is another article on the same topic, and once again, he seems to focus on using the correct and put cables on day of the dribers for yuur video card (which you should certainly do): http://www.techlore.com/article/10061/How-To-Connect-a-Computer-To-Your-TV/;jsessionid=1DE496C61344D19ABFF4EA7F26F289A3.
Here is yet another article that also goies how to set display settings in the control panel: http://www.labnol.org/software/tutorials/how-to-connect-laptop-computer-tv-screen-lcd-hdtv/2331/.
It seems to me that the problem is either the cable, you are usiing (most likely) or with the display settings on BOTH TV and laptop (don't forget the TV may need to be told to use the connection to the laptop using the options menu remotely or maybe controls on the front or the back of the TV - assuming that this is necessary with your TV (and it could be very welll)). The setup of Vista is enough straightworward and changigg screens is relatively easy once the connection is established. You must check in the right cable to use and whether or not the TV itself has settings that must be configured. I would contact tech support of the TV manufacturer for help with these two questions - they can provide you with the answers you need or they can be of any help, but it's worth a try.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Limits of pix 506 for VPN client connections
Hello. My company is looking to move away from using Microsoft's RRAS to workers to remote VPN connections. We have a 506th Pix currently serving 2 site VPN connections and client connections. Nobody knows what the limit for concurrent client vpn connections on a 506e and if having 10 to 20 clients connected at the same time (on a user base of 100 +) would cause problems. Any thoughts would be greatly appreciated.
There is no license for the number of connections limit, this is more a limitation of resources. Check that the data sheet a 506E can handle 16 MB of 3DES VPN. It's marketing plug so the actual throughput will be lower.
Hope that helps.
-
About a 2 months ago when I would like to connect my (the first storm) blackberry storm to my computer via the USB cable supplied with the phone, I was able to transfer music from my computer (itunes) to the blackberry via Blackberry Media Sync with no problems (open Blackberry Media Sync, connect blackberry to the computer via the USB port and screen Media Sync would change so that I could sync to the blackberry storm music). I didn't even have to install Blackberry Media Sync in December 2009
But now after I connect my Blackberry Storm to my computer, the screen of Blackberry Media Sync does not change and continues to display "please connect a Blackberry smartphone. I tried these tips I found online:
1.) several reboots my computer (windows vista)
2.) update/reinstall Blackberry Media Sync, then by restarting my computer
3.) reconnection from blackberry to the computer, then open Media Sync
4.) Open Media Sync first and then connect the blackberry to the computer.
5.) installation BlackBerry USB and Modem drivers (even if I can't find the USB driver for it under the Universal Serial Bus Controller when I check in the Device Manager when you go to control panel – system and Maintenance – Manager of devices, but I found a v2 COM4 and COM5 RIM virtual serial Port when you select "devices by connection" under display in Device Manager) or are RIM Serial Port virtual v2 COM4 and COM5 drivers I'm looking for?
6.) go to Options (on blackberry) - memory and make sure Media Card Support, Media Transfer Protocol (MTO) and Mass Storage Mode Support are resolved on 'On', the encryption Mode is set to 'None' and mass storage Mode Auto activate when connected, it the value "Prompt" although I tried to 'Yes' as well. It says I have 785 MB of memory space of the unit out of 879 MB total memory of the device and 7.1 GB of free space on a total of 7.3 GB of Media Card Media Card.
None of the above tips and troubleshooting tips worked. I also checked the Blackberry technical solution center but I've not found anything there that has contributed to the other. I found discussions forums online, including issues of people with 'blackberry media sync cannot connect to the device' pop up, but I have not had this pop-up. The Media Sync screen remains just the same as if I never connected the blackberry storm to my computer in the first place even if my blackberry storm recharges via the computer.
Is there something that I miss or have not yet done? What should I do?
Too bad. I went to a Verizon store and they me remove the battery and turn the blackberry. Worked like a charm and I can now use Media Sync.
Also told me that I need to update the software of the phone blackberry using Blackberry Desktop software (I have version 4 and need to update to 5) and make sure to choose to back up files when you are prompted during the update or you will lose all files, the media and info saved on blackberry.
-
PIX: Cisco VPN Client connects but no routing
Hello
We have a Cisco PIX 515 with software 7.1 (2). He accepts Cisco VPN Client connections with no problems, but no routing does to internal networks directly connected to the PIX. For example, my PC is affected by the IP 172.16.2.57 and then ping does not respond to internal Windows server 172.16.0.12 or trying to RDP. The most irritating thing is that these attempts are recorded in the system log, but always ended with "SYN timeout", as follows:
2009-01-06 23:23:01 Local4.Info 217.15.42.214% 302013-6-PIX: built 3315917 for incoming TCP connections (172.16.2.57/1283) outside:172.16.2.57/1283 inside: ALAI2 / 3389 (ALAI2/3389)
2009-01-06 23:23:31 Local4.Info 217.15.42.214% 302014-6-PIX: TCP connection disassembly 3315917 for outside:172.16.2.57/1283 inside: ALAI2 / 3389 duration 0:00:30 bytes 0 SYN Timeout
2009-01-06 23:23:31 Local4.Debug 217.15.42.214% 7-PIX-609002: duration of disassembly-outside local host: 172.16.2.57 0:00:30
We tried to activate and deactivate "nat-control", "permit same-security-traffic inter-interface" and "permit same-security-traffic intra-interface", but the results are the same: the VPN connection is successfully established, but remote clients cannot reach the internal servers.
I enclose the training concerned in order to understand the problem:
interface Ethernet0
Speed 100
full duplex
nameif outside
security-level 0
IP address xx.yy.zz.tt 255.255.255.240
!
interface Ethernet1
nameif inside
security-level 100
172.16.0.1 IP address 255.255.255.0
!
access extensive list ip 172.16.0.0 inside_nat0_outbound allow 255.255.255.0 172.16.2.56 255.255.255.248
!
access extensive list ip 172.16.0.0 outside_cryptomap_dyn_20 allow 255.255.255.0 172.16.2.56 255.255.255.248
!
VPN_client_group_splitTunnelAcl list standard access allowed 172.16.0.0 255.255.255.0
!
IP local pool pool_vpn_clientes 172.16.2.57 - 172.16.2.62 mask 255.255.255.248
!
NAT-control
Global xx.yy.zz.tt 12 (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 12 172.16.0.12 255.255.255.255
!
internal VPN_clientes group strategy
attributes of Group Policy VPN_clientes
xxyyzz.NET value by default-field
internal VPN_client_group group strategy
attributes of Group Policy VPN_client_group
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list VPN_client_group_splitTunnelAcl
xxyyzz.local value by default-field
!
I join all the details of the cryptographic algorithms because the VPN is successfully completed, as I said at the beginning. In addition, routing tables are irrelevant in my opinion, because the inaccessible hosts are directly connected to the internal LAN of the PIX 515.
Thank you very much.
can you confirm asa have NAT traversal allow otherwise, activate it in asa and vpn clients try again.
PIX / ASA 7.1 and earlier versions
PIX (config) #isakmp nat-traversal 20
PIX / ASA 7.2 (1) and later versions
PIX (config) #crypto isakmp nat-traversal 20
-
How can I control the number of clients connecting to one or more access points?
Hi guys,.
I am using several access points LWAPP/CAPWAP (1010, 1131, 1142) connected to the 4400 series wlan controllers (OS Version 4.2 and 7.0).
Regarding the client connection to access points, I have several questions:
1. extent to which clients can connect to an access point (maximum possible vs recommended)?
2. can I limit the maximum number of clients connecting to the access point in the gui controller? I found how to configure thresholds for sending traps when a number of clients connected to an access point is reached.
3 How can I balance the number of customers between two adjacent ap, who use the same SSID?
Best regards
Thorsten
Hello
1. extent to which clients can connect to an access point (maximum possible vs recommended)?
YEARS-
Here is the link for possible Maximum...
http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/
c70ccfg.html#wp1085099Recommended , Not more than 20 clients per AP.
2. can I limit the maximum number of clients connecting to the access point in the gui controller? I found how to configure thresholds for sending traps when a number of clients connected to an access point is reached.
YEARS - here's the software bug that we had raised with the development team of thre...
Symptom:
There should be a way to limit the number of wireless clients that can associate to a lightweight AP.
Conditions:
Workaround:
3 How can I balance the number of customers between two adjacent ap, who use the same SSID?
YEARS - you can configure the feature aggressive load balancing across the WLC, it can help...
Let me know if that answers your question...
Concerning
Surendra
====
Please do not forget to note positions that answered your question and mark as answer or was useful -
867 EasyVPN server: Intermittent client connectivity
I have a rather peculiar question with a particular router, which I use as an EasyVPN server.
Customers have no problem to connect to the router. The Cisco VPN Client connects without problems and without fail every time.
HOWEVER
This does not mean that the customer can obtain from the server, which is located behind the router, to which they connect.
They might be able to. They might not! It seems to vary randomly. Sometimes the client will connect, and the server will be accessible. Othertimes, the client will connect and it will not.
Now, to do some very preliminary tests, I am STILL able to ping the router LAN interface once the tunnel is up. However, I may or may not be able to ping the server.
Yesterday, for example, the connection came. I was able to ping an IP address on the local network of 192.168.0.9. The router is 192.168.0.15, I have, as mentioned above, ping without problem as well. However, the server, which is 192.168.0.1, was not accessible. After a couple disconnects / reconnect to the VPN client, I could ping 192.168.0.1 (and 192.168.0.15) and if I could get on the server without problem... However, I could no longer ping 192.168.0.9.
It almost feels "subnetty", but there is nothing defined on the router that should cause this problem I can say. Clients receive an IP address in the range of 10.10.10.5 to 10.10.10.15 on a looping with IP 10.10.10.1.
Specific no reason why the pool overlaps the closure? being a virtual interface should not make a difference on where the traffic is sent, the EFC plays sometimes strange games.
If it's not too much to ask, you can disable this loopack?
-
ORA-12518: TNS:listener could not hand off client connection
Hello
I'm getting "ORA-12518: TNS:listener could not hand off client connection" error trying to connect to the "PDB". Here are the details of my env and I do:
Windows 7
My PC to install Oracle 11 g 2 Client (that's how I got this PC). And I already 11 GR 2 installed Oracle software and a local database that is named "ORCL" (whichdesignates currently the stop).
Yesterday, I installed Oracle 12 c (12.1.0) and created ORCL12C (CBD) and a PDBORCL (PDB). I connected to the PDBORCL as SYS and created user 'SCOTT '.
I am able to connect to ORCL12C (PEH) without any problem (SQL * more and TOAD). I can go to PDBORCL (alter session set container = pdborcl) without problem. But I get the error above (ora-12518 am) when I try to connect to the user 'SCOTT' created in 'PDBORCL' using SQL * more or TOAD. I want to connect to the user SCOTT and create objects in schema SCOTT, etc.. I get the same error, even if I try to connect to the PDB as user SYS (alter session command works fine).
I am new to 12 C. So it is quite possible that I'm doing something fundamentally wrong.
C:\app\oracle\product\12.1.0\dbhome_1\BIN>sqlplus sys as sysdba SQL*Plus: Release 12.1.0.2.0 Production on Thu Nov 12 12:06:37 2015 Copyright (c) 1982, 2014, Oracle. All rights reserved. Enter password: Connected to: Oracle Database 12c Enterprise Edition Release 12.1.0.2.0 - 64bit Production With the Partitioning, OLAP, Advanced Analytics and Real Application Testing options SQL> show con_name CON_NAME ------------------------------ CDB$ROOT SQL> select con_id,dbid,NAME,OPEN_MODE from v$pdbs; CON_ID DBID NAME OPEN_MODE ---------- ---------- ------------------------------ ---------- 2 250475996 PDB$SEED READ ONLY 3 94279121 PDBORCL READ WRITE SQL> select service_id,name,pdb from v$services; SERVICE_ID NAME PDB ---------- ---------------------------------------------------------------- -------------- 6 pdborcl PDBORCL 5 orcl12cXDB CDB$ROOT 6 orcl12c CDB$ROOT 1 SYS$BACKGROUND CDB$ROOT 2 SYS$USERS CDB$ROOT SQL> SQL> select substr(username, 0, 15) username, user_id, account_status from dba_users where username = 'SCOTT'; USERNAME USER_ID ACCOUNT_STATUS ------------------------------------------------------------ ---------- -------------------------------- SCOTT 103 OPEN SQL>
-
Hi again,
I'm on my business management console and the database Instance and the headset shows the green arrow, but the connection of the Agent of the Forum shows a red arrow down and the error:
Status: failed
Details: ORA-12518: TNS:listener could not hand off client connection (DBD ERROR: OCIServerAttach)
My OraClrAgnt service is up and running (using winxp pro, oracle 11 g 2), I'm on my pc at home, all my ports are open (name of my machine's "abigail" and it's dmzhost)
Any suggestions to solve this error?
My Tnsnames ora file:
ABIGAIL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = ABIGAIL)(PORT = 1521))
)
(CONNECT_DATA =
(SERVICE_NAME = orcl.0.0.10)
)
)
LISTENER_ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = ABIGAIL)(PORT = 1521))
)
(CONNECT_DATA =
(SID = ORCL)
)
)
RMAN =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = ABIGAIL)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = rman.abigail)
)
)
My listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = E:\app\abigail\product\11.2.0\dbhome_1)
(= Extproc PROGRAM)
(ENVS = "EXTPROC_DLLS=ONLY:E:\app\abigail\product\11.2.0\dbhome_1\bin\oraclr11.dll")
)
)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP) (HOST = ABIGAIL)(PORT = 1521))
)
)
ADR_BASE_LISTENER = E:\app\abigail
My SQLNET. ORA
SQLNET. AUTHENTICATION_SERVICES = (NTS)
NAMES. DIRECTORY_PATH = (EZCONNECT, TNSNAMES, LOCALHOST)
NAMES. TRACE_LEVEL = ADMIN
My alert file
< time msg = "2013-10 - T 10, 20: 47:02.687 - 04:00 ' org_id = 'oracle' id_comp = 'tnslsnr'"
type = 'UNKNOWN' level = '16' = host_id "ABIGAIL."
host_addr =': 1' >
< txt > 10 October 2013 20:47:01 * (CONNECT_DATA = (CID = (PROGRAM =)(HOST=__jdbc__) (USER = SYSTEM)) (SERVICE_NAME = orcl.0.0.10)) * (ADDRESS = (PROTOCOL = tcp (PORT = 38289))(HOST=127.0.0.1)) * establish * orcl.0.0.10 * 12518
< / txt >
< / msg >
< time msg = "2013-10 - T 10, 20: 47:02.687 - 04:00 ' org_id = 'oracle' id_comp = 'tnslsnr'"
type = 'UNKNOWN' level = '16' = host_id "ABIGAIL."
host_addr =': 1' >
< txt > TNS-12518: TNS:listener could not hand off client connection
AMT-12560: TNS:protocol adapter error
< / txt >
< / msg >
My listener status and services
LSNRCTL > status
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Prod
ction
Start date October 10, 2013 22:47:58
Uptime 0 days 0 h 2 min 1 sec
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Listener parameter File E:\app\abigail\product\11.2.0\dbhome_1\network\admin\l
istener.ora
E:\app\abigail\diag\tnslsnr\ABIGAIL\listener\ale log listener
rt\log. XML
Summary of endpoints listening...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=ABIGAIL) (PORT = 1521)))
Summary of services...
Service 'CLRExtProc' has 1 instance (s).
Instance of 'CLRExtProc', status UNKNOWN, has 1 operation for this service...
Service 'orcl.0.0.10' has 1 instance (s).
Instance "orcl", State LOAN, has 8 managers of this service...
The command completed successfully
LSNRCTL > services
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))
Summary of services...
Service 'CLRExtProc' has 1 instance (s).
Instance of 'CLRExtProc', status UNKNOWN, has 1 operation for this service...
Managers:
"DEDICATED" set up: 0 denied: 0
LOCAL SERVER
Service 'orcl.0.0.10' has 1 instance (s).
Instance "orcl", State LOAN, has 8 managers of this service...
Managers:
"D006" put in place: 0 denied: current: 0 0 max: 800 status: loan
DISPATCHER < machine: ABIGAIL, pid: 1312 >
(ADDRESS = (PROTOCOL =)(HOST=ABIGAIL) (PORT = 1060) CST)
"D005" put in place: 0 denied: 12 current: 0 max: 800 status: ready
DISPATCHER < machine: ABIGAIL, pid: 1288 >
(ADDRESS = (PROTOCOL =)(HOST=ABIGAIL) (PORT = 1061) CST)
"D004" put in place: 0 denied: 1 current: 1 max: 16383 State: loan
DISPATCHER < machine: ABIGAIL, pid: 1260 >
(ADDRESS = (PROTOCOL = tcp)(HOST=ABIGAIL) (PORT = 1063))
"D003" put in place: 0 denied: 1 current: 1 max: 16383 State: loan
DISPATCHER < machine: ABIGAIL, pid: 1140 >
(ADDRESS = (PROTOCOL = tcp (PORT = 1062))(HOST=ABIGAIL))
"D002" put in place: 0 denied: 1 current: 1 max: 16383 State: loan
DISPATCHER < machine: ABIGAIL, pid: 140 >
(ADDRESS = (PROTOCOL = tcp (PORT = 1059))(HOST=ABIGAIL))
"D001" put in place: 0 denied: 1 current: 1 max: 16383 State: loan
DISPATCHER < machine: ABIGAIL, pid: 1072 >
(ADDRESS = (PROTOCOL = tcp (PORT = 1057))(HOST=ABIGAIL))
"D000" put in place: 0 denied: 1 current: 1 max: 16383 State: loan
DISPATCHER < machine: ABIGAIL, pid: 748 >
(ADDRESS = (PROTOCOL = tcp (PORT = 1058))(HOST=ABIGAIL))
"DEDICATED" set up: 0 denied: 0 status: ready
LOCAL SERVER
The command completed successfully
I added this on my listener.ora
DIRECT_HANDOFF_TTC_LISTENER = OFF
Now it works!
Moral of the story, google is your friend lol. Thanks for replying tho!
Maybe you are looking for
-
After update automatically to 32.0.3 Thursday last Monday on the computers of all of our employees and boss both Win7 pro and XP pro, we saw Firefox sessions that will not bring the print dialog box. The print preview dialog box will return but no bu
-
Several media related issues with satellite A210-171
I have an Equuim A210-171 which has a S-Video socket and a display ATI card I hooked up to my TV but I can't get a picture. I have implemented in the ATI Control Panel and have tried to connect before you turn on the TV, but still, this has no effect
-
On adding folder items to get the new name for the item?
I really have no idea what I'm doing but I'm trying to capitalize on the addition of items in folder / about items in folders to follow or not removing a specific directory exists but cannot for the life of find me a way. Basically I want it to look
-
(HELP) How to use Lenovo K910 Pendriver OTG
Hello, bought a lenovo k910 and there is no entry for micro memory card and your very limited memory and 16 GB. Finally, I wanted someone can help me with a tutorial explaining how to use a USB FlashDrive with OTG technology to extend the memory of m
-
msln program not found autocheck not done
I ran a Norton 360 Preview on my Compaq laptop and had several things happen. First she wiped my Palm Desktop. I got this in service. My new Verizon Wireless MI-Fi will not properly install even if the previous version ran perfectly on this computer