OJJ6400_full_13.exe install fail

Similar Questions

• I try to install the update of PS CS6 can read files camera raw Nikon D800.  The exe file fails and says trying to install the application manager.  I did it and the update still does not work.  Now what?

  I try to install the update of PS CS6 can read files camera raw Nikon D800.  The exe file fails and says trying to install the application manager.  I did it and the update still does not work.  Now what?

  update by downloading the files directly and then apply them: http://www.adobe.com/downloads/updates/

  If this fails, attach a screenshot of the error message if it is in English.  otherwise, quote it.

• j6410 over wifi is detected but not settled it on Win7 with the new installation of OJJ6400_Full_13.exe

  Dear all,

  I try to install my printer all in one HP Officejet J6410 (connected to an access point) wireless to my HP Pavilion dv5-1155eg laptop running Windows 7 Professional (ENG). I am trying to install using the new "HP Officejet Full Feature Software and Driver" (OJJ6400_Full_13.exe) for the specified printer. ""

  The rest of the HP software installation succeeded it. I am able to see the web interface of the printer from my browser. In the past, before the release of this new driver I could even print wirelessly, using the base driver provided by Win7.

  What fails is the installation of the printer itself:

  I use the software to 'Add a device' the HP that successfully locates my printer wireless in the screen "found network printers." I selects the printer, press 'Next', Network Diagnostics seems to run ok and then start the installation of the printer, it is firstly says 'printer detected... ". "but she eventually fails with the message:" printer setup is not complete - click Retry to try install again... blah blah. "

  To make richer information, I use a firewall of G Data Internet Security 2010 that I followed him and I can see that it is not blocking anything. I even tried installing with the firewall disabled, anyway...

  In addition, I tested my printer with HP Network Diagnostic Utility. The utility comes with all the information correctly (network configuration, configuration of the computer, HP printer running services, found wireless).

  Any help is appreciated to make it work because it's a major drawback, as you can understand...

  Thank you in advance...

  Thanks for the reply, but that was not the solution... As I mentioned earlier, I had tried in the first place without the firewall installation.

  But, I found a good solution to the problem, and because it might be useful to others I write it here:

  After the movie with the help of HP without success, I managed to find a workaround for the problem:

  1. I uninstalled everyhting about printer software/drivers & restarted windows.
  2. I installed the begin shape everything (the file I downloaded on the site of HP), using the USB option this time and not a wireless.
  3. RESTART WINDOWS (sucks bigtime - respect for unix/linux "reboot is for material changes!")
  4. After you have installed successfully with the USB cable, I chose the option 'Configure wireless settings' Installer extracted files resulting from the file I downloaded frrm the HP site (if after installation, the installer window is closed you will need to locate the extracted in your Temp folder files or just run the file again..). Just follow the instructions of the installer.
  5. This should make the thing! REBOOT (again) and you're ready to go!
  6. (OPTIONAL) For me, the installer actually worked at the last moment, where he stuck permanently. But that was ok, because it's stuck after you set up the printer and corresponding software. After some time, the installer came out with the usual submit an evaluation form. Just ignore it, reboot and everyhting should work. At least it did for me...

  See you soon

• iTunes exe file fails to complete the download for windows surface 3 pro 10

  When I go to the itunes store and download itunes for windows, download appears to move, but when you are finished, he said that the exe file failed to download.  I have 3 pro surface, running windows 10

  If you have trouble downloading the installation file from iTunes to the current address try; Uncheck the box "Keep me updated", clear the cache of your browser, change the settings of the blocker, a right-click or ctrl - click on the download button, using a different browser, or by using the direct links here.

  See troubleshoot problems with iTunes for Windows updates if you have additional problems at the facility.

  TT2

• Vista SP2 x 64 install failed with error 80004005

  I tried to install the SP2 for Vista X 64 (KB948465) four times.  The most recent installation attempt failed after
  (1) created a new administrator account and did the following...
  (2) uninstalled CA Antivirus Suite (no other antivirus installed).
  (3) stop the Windows Update service, renamed %windir%\SoftwareDistribution for... \SoftwareDistributionOld, restarted update service, restarted.
  (4) installed and run CheckSur (can provide the journal).
  (5) restarted in clean boot mode.
  6) attempted to reinstall SP2.

  In all attempts, installation seems to be completed, during the restart of the installation of all 3 full updates to 100%.  However, the message then States that the installation failed and the original configuration was recovering.

  I have a new a6700f desktop HP Pavillion, AMD Phenom X 4 9150e Quad Core clocked at 1.8 GHz, 4 GB RAM, 500 GB HARD drive; Windows Vista Edition Home Premium x 64 SP1, nVidia Quadro FX 370 video card.

  Service pack Windows Vista and Windows Server 2008 install fails with error 0x80004005
  http://support.Microsoft.com/kb/971204 TaurArian [MVP] 2005-2010 - Update Services

• I have a purchased Adobe Creative Suite 3 Design Standard. As I changed my PC, I can't use my original installation CD. I tried to download the programs on the web, but get "COMPONENT INSTALL FAILED" what should I do?

  I have a purchased Adobe Creative Suite 3 Design Standard. As I changed my PC, I can use my original installation CD.

  I tried to download the programs on the web, but get "COMPONENT INSTALL FAILED".

  What should I do?

  Please see:

  Error "problems occurred during installation". CS3

  https://helpx.Adobe.com/Creative-Suite/KB/install-Photoshop-CS3-get-error.html

  I hope this helps.

  Concerning

  Megha Rawat

• The update install fails error 81

  Update install fails with error 81; "another installer running" I have no other installer running on this computer. All the solutions to this? Thank you!

  Hello

  This error appears when there is a background running program in the machine, the best option is to shut down the machines all running processes are closed. Restart the machine, it should work.

  You can also kill all processes associated with CC in the monitor activity manager task & then start.

  #main_You_are_already_running_another_installer http://helpx.adobe.com/Creative-Suite/KB/Troubleshoot-error-messages-Bootstrapper-CS5.html_

  Kind regards

  Sheena

• CS6 install fails to boot on Win 7 PC

  CS6 install fails to boot on Win 7 PC. Have tried the CS cleanup tool, installation of the admin, download Application Manager account separately and checked the installation media. The PDApp.log display PIM errors; Failed to load updaterInventory library, error in _pimCreateAndValidateUpdateInventoryLibrary, Setup - impossible free PIM items. Any help appreciated.

  Hi karima,.

  Please navigate to:

  Program/C Files(X86) /Common Files/Adobe/OOBE and rename it to OOBE.old

  Program/C Files(X86) /Common Files/Adobe/Caps and rename it to Caps.old

  Run the installer and try to install. If the error persists, then download and install again.

  Kind regards

  Romit Sinha

• Value added package install failed...

  Hi, I had a little problem.

  I've got GamerEdition of Vista 64 - bit OS. And a Toshiba - Satellite Pro U400 - 13G system specifications:

  Core 2 duo P8400 2.26 ghz processor
  4 GB OF RAM
  Intel HD 4500 graphics card
  Conexant HD Audio

  Now, when I try install Toshiba Value Package added, I get this error at the end of the installation:

  ID_ERR_NOTINSTALLTVALZ_MESSAGE

  ... and Setup fails.

  But the Setup has copied the files on my "C:\Program Files (x 86) \TOSHIBA" folder, IV ' e got:

  Bluetooth monitor
  FlashCards
  PCDiag
  Energy-saving
  SMARTLogService
  SmoothView
  TBS
  TOSHIBAValueAddedPackage
  TVALZ
  Utilities

  ... in my Toshiba folder, containing a total of 52, 4 MB. In the utility folder, I try to run "TACSPROP.exe" and says that "the registry is missing or may be broken.

  now... I know this problem most likely because I have a modded Vista version, but does anyone have an idea how I can do value-added package running on my system?

  I agree with you. You have changed the version of Vista. I imagine that this Department of software Toshiba create each tool and utility for Vista and of course to test it properly.
  No free version is not designed to work with the version you are using.

  VAP is not editable by anyone and there is nothing you can do. If you use an exotic OS version either it works or not. Sorry but there is nothing you can do with VAP.

• BT stack install fails - RFBus error-10 in x 32 Vista Device Manager

  Hello

  the Toshiba Bluetooth Stack 5.10.1 Installation fails with my laptop another installed Blutooth 350 Module manufacturing.

  The Bluetooth RFBus driver is marked as error 10 in Device Manager.
  Is that what all I could test/edit to make it work?

  Concerning

  Robert

  Hello RobertHerter,

  i 'don't know what is your model of laptop, but try this:

  -First remove the old version of the battery installed bluetooth - with wireless on

  [Remove battery Bluetooth]

  - Command line:

  MsiExec.exe /x "{CEBB6BFB-D708-4F99-A633-BC2600E01EF6}" / SB

  - Manually:

  Start the Setup Bluetooth Bluetooth-stack or
  Use "Start-> Control Panel-> Add / Remove programs->.
  Bluetooth Stack for Windows by Toshiba ".

  -Reboot your laptop

  -Make sure that your wireless network is enabled

  -Install the the right version for your notebook - vista 32bits (Bluetooth Stack 5.10.01 Windows 2000 / Windows XP / Windows VISTA)

  -If you have not yet any reboot error.

• LyncVDI.exe installation fails on the t610 with WES7

  I tried to install LyncVDI.EXE on a t610 with WES7.

  I have looged on administrator, disabled the filter entry and I just got a message "installation failed."

  Any hint to someone?

  You must ensure that your TEMP folders are not z:\temp.

  z:\Temp is a based RAMdrive folder and the RAMdrive is 32 MB by default.

  You can use a temporary folder on C: (for example, c:\temp), a network of road; a USB key.

  You can temporarily change the folder temp with the following commands in a Command. The EXE window:

  If not exist c:\temp\nul mkdir c:\temp

  Set temp = c:\temp

  the value of the tmp = c:\temp

  [PathToLyncvdi] \lyncvdi.exe

  If you want to use something other than c:\temp, change the commands accordingly.

  [PathToLyncVDI] should be replaced with its actual path.

  Tell me if it worked for you

• KB2656353 install fails with error 0 x 643

  Dear Microsoft support community,

  (a) I have Windows XP Professional SP3.  I haven't used this computer
  in almost a year, so the first thing I did was to hang the
  computer, connect to the Internet and run Microsoft update.
  There were 78 updates and 75 of them were installed successfully.
  (b) when I tried to install KB2656353, the installation failed with error
  0 x 643.
  (c) Googling turned up to http://support.microsoft.com/kb/976982 .
  I tried the Microsoft Fix it 50123, but which did not help.
  (d) I repaired then the .NET 4 Client Setup.  No joy.
  (e) I ran the auditor of .NET tool to
     http://blogs.msdn.com/b/astebner/archive/2008/10/13/8999004.aspx

  And he noted "the check is successful" for
     
  .NET 1.1 SP1
  .NET 2.0 SP2
  .NET 3.0 SP2
  .NET 3.5 SP1
  .NET 4 client
  .NET 4 full

  (f) I have concluded that uninstall and then reinstall the whole .NET
  framework was not claimed for now, since it does not seem
  as indicated in KB 976982 corrupted.

  (g) I checked the registry for .NET 1.1 hotfixes listed issues
  in http://blogs.msdn.com/b/astebner/archive/2004/11/23/268934.aspx
  in the "Info 9002..." section, but I have not found any.

  (h) I downloaded the update in a separate file,
  NDP1.1sp1 - KB2656353 - X 86 .exe, to http://download.microsoft.com,.
  and tried to run as a standalone program, but it stops almost
  immediately.  By redirecting the logging to a local file, I find
  the update has not been installed, but I do not know how to interpret
  the log file, which is much too large to be able to post it here in its entirety.

  How can I get this update to install?

  Related post on the same question:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cant-install-update-kb2656353/744caf0c-4450-40DE-BB8F-cf4ca2ee565d

• Vista SP1 install fails - error 0x8007000D

  Hi, I seem to have this problem as well as many others, and I think I did everything to try to solve it. Can anyone help?

  • Install Windows Update fails repeatedly,
  • I have reactivated the windows online installation
  • I ran the System File Checker and it comes through ok
  • I uninstalled the antivirus I've had in the case who was at the origin of the problems

  Thank you

  The result of Genuine Advantage Validation Tool is below:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: genuine
  Validation code: 0
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key:
  Windows product key hash:
  Windows product ID: 89572-OEM-7232876-90454
  Windows product ID type: 8
  Windows license type: COA SLP
  The Windows OS version: 6.0.6000.2.00010300.0.0.002
  ID: {94E467F4-B61F-4ADE-A124-BF70284CFCD6} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows Vista (TM) Home Basic
  Architecture: 0x00000000
  Build lab: 6000.vista_gdr.100218 - 0019
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 7.0; Win32)
  Default browser: C:\Users\Jalene\AppData\Local\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {94E467F4-B61F-4ADE-A124-BF70284CFCD6}1.9.0027.06.0.6000.2.00010300.0.0.002x 32 89572-OEM-7232876-904548S-1-5-21-654992123-43396017-758516717Dell Inc.. Inspiron 1520 Dell Inc.. A03 20070816000000.000000 + 0003D333507018400FA08090409GMT Standard Time(GMT+00:00)03DELL M08 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.0.6000.16509
  Name: Windows Vista HomeBasic edition
  Description: operating system Windows - Vista, channel OEM_COA_SLP
  Activation ID: 91dbad68-4713-4f9c-b351-6e77a8361741
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 89572-00144-328-790454-02-2057-6000.0000-2102012
  Installation ID: 016920087815198043975011534253545500035282402076182705
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkId=57201
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkId=57203
  Use license URL: http://go.microsoft.com/fwlink/?LinkId=57205
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkId=57204
  Partial product key:
  License status: licensed

  Windows Activation Technologies-->
  N/A

  --> HWID data
  Current HWID of Hash: PgAAAAEABwABAAIAAQABAAAAAwABAAEAeqhYwhjEki8kK2ZzXgqQc0aDBgwgaFKDuPvy9LipysEwd6xWsg0 =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20000
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  REFERENCE DELL M08 APIC
  FACP DELL M08
  HPET DELL M08
  STARTING DELL M08
  MCFG DELL M08
  M08 DELL SLIC
  SSDT PmRef Cpu0Cst
  SSDT PmRef Cpu0Cst

  Hi PA bear. Thanks for the advice - be the other side of the pond so unable to pull out of the tech support I just wiped the machine and started. It seemed easier than trying to clean and repair the system!

  Reinstallation of Vista then doing the service pack before you can update all device drivers or install anything worked, thank you.

• Web/redistributable DirectX 9.0 install fails on windows 7 ultimate x 64

  So, I recently bought Mass Effect for the PC, which requires DirectX 9 .0c to run. I try to install DirectX 9 .0c from the Microsoft Web site and two web installation and installing redistributable full download give me the following error message:

  An internal system error has occurred. Please see DXError.log and DirectX.log in your Windows folder to determine the problem.

  Content DXError.log the install:

  --------------------
  [19/01/10 18:40:02] module: dxupdate (Sep 4 2009), file: dxupdate.cpp, line: 6111, function: CFusion::CFusion

  Has no API: LoadLibraryShim()
  Error: (0 x 80070006) - the handle is not valid.

  --------------------
  [19/01/10 18:40:02] module: dxupdate (Sep 4 2009), file: dxupdate.cpp, line: 2958, function: IsMDXInUse

  Failed to initialize MDXCheck.

  --------------------
  [19/01/10 18:40:02] module: dsetup32 (Sep 4 2009), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn

  DirectXUpdateInstallPlugIn() failed.

  ------------------------------------------------------------
  Content of the file DirectX.log (relevant room downstairs):
  19/01/10 18:40:02: dxupdate: -.
  19/01/10 18:40:02: dxupdate: DirectXUpdateInstallPlugIn(): DXUPDATE_MANAGEDDX
  19/01/10 18:40:02: dxupdate: DirectXUpdateInstallPlugIn(): verification of the Apr2006_MDX1_x86_Archive.cab...
  19/01/10 18:40:02: dxupdate: DXCheckTrust(): D:\Users\Bryan\Desktop\temp\Apr2006_MDX1_x86_Archive.cab is approved.
  19/01/10 18:40:02: dxupdate: cabin D:\Users\Bryan\AppData\Local\Temp\DX35BF.tmp\apr2006_mdx1_x86_archive.inf checked out file
  19/01/10 18:40:02: dxupdate: DirectXUpdateGetSetupInformation(): Version of DirectX: 4.09.00.0904.0
  19/01/10 18:40:02: dxupdate: CheckDependency(): no dependency.
  19/01/10 18:40:02: dxupdate: DirectXUpdateGetSetupInformation(): Section [4.09.00.0904.0-4.09.00.0904.0_WinNT@64] is being installed.
  19/01/10 18:40:02: dxupdate: CFusion::CFusion(): LoadLibraryShim() failed, error = 0 x 80070006.
  19/01/10 18:40:02: dxupdate: IsMDXInUse(): failed to initialize MDXCheck.
  19/01/10 18:40:02: dsetup32: CSetup::InstallPlugIn(): DirectXUpdateInstallPlugIn() failed.
  19/01/10 18:40:02: DXSetup: DSetupCallback(): Phase = 0, steps = 0
  19/01/10 18:40:02: dsetup32: launch the finalization: phase: 0-0, total: 0-0
  19/01/10 18:40:02: DXSetup: DSetupCallback(): Phase = 3, steps = 0
  19/01/10 18:40:02: dsetup32: Installation ended with the value-9 = internal or error not supported
  19/01/10 18:40:26: DXSetup: WM_APP_ENDINSTALL
  19/01/10 18:40:26: DXSetup: ~ CDXWSetup()
  -----------------------------------------------------------

  I tried installing in safe mode and after you disable the antivirus software. DXDIAG. EXE confirms I have DirectX 11 is installed, but the program will not work because it expects DX9 dll file (said "the program can't start because d3dx9_31.dll is missing on your computer." "") ""Try reinstalling the program to fix this.").

  Any help is very appreciated! Thanks in advance.

  Shalini,

  Games DirectX 9 requires DirectX 9 dll. This is a common problem... see games like NeverWinter Nights 2, which cannot be run on Windows 7 unless DirectX9 is installed (even if, Yes, Windows 7 comes with DirectX 11). Mass Effect is one of those games that requires DX9 DLL files, and it does not run.

  It seems that the problem had to do with the missing system files... SFC/scannow revealed several missing files that could not be replaced. Most of them appeared related to .net Framework... I think it's maybe because I installed .net 4.0 Beta 2 to try to get the Zune software running. However, I was forced to do a reinstall of Windows 7 to install DirectX 9 (which worked immediately after the new facility). No idea why this could cause problems with the installation of DirectX 9, but that's the best explanation I have right now.

  Still, your point is not not possible to install DirectX 9 on Windows 7 is not correct. It is possible and necessary to run some games.

• USB3 Driver install fails after installing fresh Win7

  Today, I did a full 64 fresh install of Windows 7 (using supplied Alienware DVD) of my Alienware Laptop M17xR3.  After finished with updates installed so Win7 Windows7, I went to the web page of Dell Alienware and installed all the recommended drivers.

  In my device manager, all components of the system have been scanned and work well except one... my USB controller under other.  Its my USB 3.0

  I tried to install this driver recommended several times following...

  NEC USB 3.0, v.2.0.26.0, A00see details
  R289408.exe

  The installation fails every time saying: error - 2: the system cannot find the specified file.

  Here's a screenshot:

  

  My serial number is CW2B5Q1

  

  It is probably just a standard set of drivers NEC and Renesas. Have you tried to manually unzip archive and look inside or run from there?

  Have you tried letting Windows load a Windows-Update driver?