Old 7400c is a driver for my scanner

Similar Questions

• Cannot install the driver for my scanner Visioneer Patriot 680

  Even with the Visioneer driver for my scanner Visioneer Patriot 680 download, Windows 7 Professional will partially install the drivers and then reject them.  The computer sees the machine, but stated that there was no pilot.  Scanner will not run.  How can I get the program be accepted?

  Original title: OneTouch

  I pass by the site of Visioneer.
  It turns out that the problem was a fragmented removal of the old drivers of Windows XP which can not be deleted automatically.  Necessary to remove a manual sequence that a Visioneer technology has helped me through.

  I had spent hours and hours trying and trying.  Even had change the registry.

  Thanks for your reply.

• Problems when installing a driver for my scanner

  Hello!

  I have serious problems when you try to install a driver for my scanner - Epson Perfection V700 - on my desk. It was installed earlier, but after a reinstall of XP Pro (SP3), it seems impossible to install it again. Whenever I get an errormessage: "not able to copy the files. Make sure that the target disk is not dead. »

  I tried to install the driver when I had turned off almost all the programs, in "auto-start" - same problem. I run a scan of the disc and also done a defrag - same problem. I have installed many programs on my desktop, so until after I encountered the problem with the driver for the scanner and it was no problem to install the driver on my laptop (also XP Pro).

  I ' v chatted with the support of Epson in England and they have suggested that the problem was in my PC. Because I'm taking care of family archives, I am more eager to get the scanner working again. Any advice/suggestions how to deal with the situation are so much appreciated.

  Hello

  Good to know that your problem is resolved and thanks for letting know us.

  ·        If the scanner works fine then, why do you want to update the driver?

  You may need to consult the manufacturer of the scanner (Epson) to check if they have released an update of the driver for your scanner. To update the drivers on which are present on the system, follow the steps mentioned in the article below.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• I need a 64 bit driver for my scanner: Epson Perfection 2580 Photo. Any ideas? Epson told me that they can't have a 64-bit version of this software...

  I need a 64 bit driver for my scanner: Epson Perfection 2580 Photo.  Any ideas?  Epson told me that they can't have a 64-bit version of this software...

  Http://www.hamrick.com/ VueScan supports the 2580 Perfection but is not free.

• Windows 7 says I need to install this driver for the scanner to work, but I can't. HP m1522nf driver wia

  Windows 7 says I need to install this driver for the scanner to work, but I can't.

  As for all the HP drivers, simply visit the HP support site http://support.hp.com/, enter the model number in the search box, click on the link drivers and you're there.  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3442754&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=3442750

• Where can I find a twain driver for the scanner?

  Original title: twain driver for Windows 8

  After having upgraded Win 8, my scanner has failed. Once verified, the problem come from twain driver. Pls help

  Fixed mine. There is no drivers Windows 8 available on the Canon's Internet site or Windows Update. Follow these steps to install a scanner CanoScan 8400F under Windows 8 x 64 in desktop mode:

  (1) download and install the drivers Windows 7 x 64 on the Canon site.

  (2) launch Manager devices, right click and uninstall any unknown device (?), then scan again for new hardware and drivers Windows 7 x 64 installs automatically.

  (3) download and install the Canoscan Toolbox software from the Canon site.

  (4) run the Canoscan Toolbox software, select settings and click on the reset button to fix the non-working electronic copy, scan, PDF, mail scanner buttons.

  (5) reset.

  The button is restored after the restart. Everything works as expected today. Good luck!

• I need a driver for my scanner HP Scanjet 3530c Scanner

  where is the link to download the driver for windows 7 (64 bit)?

  where is the link to download the driver for windows 7 (64 bit)?

  On the HPs website - you know - those people who make and support the product.  ;-)  (IF they have decided to support this specific product under any operating system you chose to run, you'll find it here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=73497&lc=en&cc=us&dlc=en&lang=en&cc=us)

  And they are not - it seems.  Order in Windows Vista.

  You may be able to use the Vista x 64 driver.

• Need driver for 1bI scanner Vuego 6678-

  vuego 6678-1bI scan mfd, August 2001, missing for windows device driver 7, help me find the driver...

  Original title: vuego 6678-1bI scanner

  Hi Santosh,

  It seems that there is no driver available for Vuego.

  I suggest you to contact the seller or the manufacturer of the scanner to get help.

  Please let us know if you have more queries on Windows.

• need driver for my scanner hp scanjet 8250. Can not find mine

  I have lost my install CD.  Where can I find another so I can run my scanner.  I realize how old this is but he served well and do not want to replace it.  So if no thinking, please let me know.  Thank you

  Hello

  Start here http://www.HP.com/cposupport/Loc/ click on support and drivers > drivers and software. Put scanjet 8250 fieldwork and research.

  This should take you

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=214604&TaskID=135&prodTypeId=15179&prodSeriesId=214599&lang=en&cc=us

  Don

• Issues of driver for the scanner Epson WF 3520

  Hello

  By Epson support, I was told that what follows is a Microsoft issue.

  I have a printer Epson WF 3520. I use Windows 7 64-bit. I tried the drivers to load the disc that came with the printer / scanner and also tried loading new drivers from the site of the such Epsom as advised by them.

  I did this a lot, a lot of time uninstalling and deleting the files appropriate between attempts.

  Support very good printer drivers and I can print wireless with no problems.

  But I can't load the drivers scanner no matter what I do. Whenever I try, I get the message "cannot load drivers scanner.

  Successfully, I loaded the drivers and used the printer and the scanner on two other laptops - a running the same version of Windows 7 and Windows 8 running.

  Any help would be appreciated.

  Concerning

  Try turning off the automatic updates of windows update first.

  Start, right click on computer/properties/Advanced/settings/device installation control panel - not let choose me and install win update never save the changes.

  first uninstall previous driver of scanner software and make sure that there is no registration in start/printers and devices. Then install the latest driver of Epson.

• I would like to know how can I find a driver for a Scanner flat Artec e48u is really free.

  Cannot install Artec e48u Scanner

  This service is free, but it goes up to XP and your version of Windows is not mentioned.

  http://drivers.alege.NET/78/Artec-scanner-E-48U-142.html Bruce Hagen MS - MVP [Mail]

• Windows 7 Driver for Scanner Canon

  I just got Windows 7 64 bit for my dad and installed and works fine, the only thinkg this thing that causes us problems is that it has a scanner more old "canoscan lide30' and it worked very well with Windows XP but now Windows 7 seems not to have a driver for the scanner, I was wondering just if first is there a driver for him and if so, where can I get. second if not a pilot so is there a driver that I can use to operate for now? Please let me know

  Compatability MS says it's not compatible
  http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=Canon%20CanoScan%20LiDE%2030%2048Bit%20USB%20PC%2FMAC%20Scanner&v=Canon&uid=7890A002&pf=0&pi=5&c=Printers%20%26%20Scanners&sc=Scanners&os=32-bit

  CanoScan LiDE 30 support with windows vista drivers
  http://www.USA.Canon.com/consumer/controller?Act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=351&ModelId=6623

  Select the operating system from the drop-down list, you should essentially be able to use the Vista drivers but
  If you wish, you can use the Compatibility Mode to install if it fails to install correctly

  Right-click on the Setup file
  choose Properties
  Select the Compatibility tab
  Select the Vista 64-bit
  Press ok
  Run the install file

  Help others, tell us which solves your problem. Click useful Vote for those who help.

• Need driver for scanner HP Scanjet 5400c using Windows 7

  HI: I just bought a new computer and was dismayed to find that HP does not provide drivers for my 5400c Scanjet. I read another post referring to a member of this forum on the site of VueScan for 3 third-party drivers, but I don't see my scanner model specific it. I see 5300C and 5370c listed.  Does anyone know if the driver or the other of these would work for the 5400 c?

  And someone has other ideas for this problem? This seems to be a large problem of customer service that HP should be confronted. I really love my scanner and hate having to shell out $ grave on top of the $ I spent on the computer itself.

  Thanks for all the answers.

  Paul Miller

  Windows 7 was not able to find the driver for this scanner.

  I downloaded the following driver from the HP Web site (which is for XP and windows 2000)

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=SJ-21893-1&LC=en&DLC=en&cc=us&OS=228&product=59064

  After the installation of this driver, I reconnected my scanner to the computer. This time, windows 7 are driver and installed.

  I installed and then started HP Scan Pro 3.1 by using "Run as Administrator". Run normal gave me error but this way it worked perfectly for me.  I use 32 bit Windows 7.

  Hope that it wroks for you as well.

• PIXMA 180 has lost driver for scanner - what can I do?

  I lost the driver for the scanner, I have a pixma 180.  Tried to use the CD, but computor would not read. I'm not gifted in computor so I am at a loss.

  So cheap printers, buy a new.

• Driver for scanner 6678-ava acer for vista

  I need a driver for VISTA scanner acer 6678-ava

  Hi Carlos,

  You can check the updates of Windows and see if driver updates are available for the scanner.

  You can also use the disk provided by the manufacturer to install the drivers.

  For more information, see the article:

  Looking for drivers

  Also see the article:

  Working with the scanner and Camera Installation Wizard

  You can also get in touch with Acer support and are looking for the same thing.

  Acer contacts

  http://us.Acer.com/AC/en/us/content/drivers