Old computer / won't take Windows 10

Similar Questions

• I tried to install CS3 with a serial number from my old computer to my new windows 7.  I tried installing and uninstalling. I've been on the cat

  I've been tryig to install CS3 with a serial number from my old computer to my new computer windows 7.  I have installed and reinstalled and rebooted the computer, takes off firewall and everything I know to do.  I was chatting to Adobe several times during the day and nobody seems to be able to help me refocus on my computer. This is the message I get when I put in place: you can only install a single Adobe product at a time.  Please fill out the other installation before installing Adobe CS 3.  I had a computer specialist to analyze it and try to help me, even the screen sharing and could not understand it.  He told me to call Adobe and as you know there is no one to help you live that can be very frustrating when you've spent the day and exhausted all options.  I know it worked on my computer and the fact yet but I use is more than one.  Can you or someone from Adobe please fix this.

  Moving correct Forum.

• Transition from old computer to a new Windows XP computer

  I brought a personal computer and you want to install Windows XP Home Edition from my old slow computer to the new computer. Also, I don't know the old computer. Please advice how can I do?

  If the license on the old computer is an OEM license, sure you can not because it is linked to the original computer its installed. If it is a full commercial license, you can. Just make sure you have all of your required drivers for when you are installing.

  I hope this helps.

• Computer won't start windows after SP2 updated which runs without error messages.

  Hello
  I have problem with SP2 update. After correct installation the computer not boot to windows and the screen is black.
  I have toshiba A55 S326 all of origin, on which I replaced HD (now 250 GB) and RAM (1 GB now). In past I have updated the bios to version 1.40 delivered by the producer.
  As I have new HD, I used the factory restore CD for Windows XP Home Edition. I have run all the updates that the system has been to download. Each think worked until I don't have install SP2. After correct instalation without error notice system invited to restart, I have confirmed, but the computer has not started load windows again.
  I tried several times, checked for possible errors, I used Critical Update 885626 before SP2 installin sugested, but all the time, same result. Black screen without loading Windows.
  You pls can someone advise for me what I have to do.
  As I have only the factory recovery disc, I'm not able to run the recovery console, because recovery is formatting disc before editing Windows.
  Can you pls suggest me how to get the WIndows XP or Windows XP Home Edition CD bootable recovery console.
  Thank you.

  Hi sake,.

  Welcome to the Microsoft Answers site.

  (a) you're able to boot in safe mode?

  If you are able to start in safe mode, then I suggest you to start in safe mode and install the recovery console that you already have a disk. See the article mentioned below.

  How to install and use the Recovery Console in Windows XP

  http://support.Microsoft.com/kb/307654

  I suggest you to activate the VGA (Video Graphics Array) mode and check. Follow the steps mentioned below.

  1 restart the computer and press F8 and choose Enable the VGA Mode in the menu options Start early

  Method 1:

  To use the safe mode option, follow these steps:

  1. reboot your computer and start typing the key F8 on your keyboard. Select safe mode from the menu.

  For more information, see the article mentioned below.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Let us know if it works so that we can solve problems more.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have an old computer from Compaq with Windows 98 on it. Can I upgrade to Windows XP?

  I have an old Compaq that win98, I install Win XP on it? and it is quite easy to do?

  original title: the WINDOWS UPGRADE

  Check that the disc does not have OEM on it, and you have a bet to level or retail key to go with it.

  You should be able to run the install from Windows 98. If this is not possible your computer does not support boot from CD, you may need to run the install with a floppy disk.

  Please see the following:
  http://support.Microsoft.com/kb/316639
  http://support.Microsoft.com/kb/978307

• my computer won't resume windows from hybernation.

  If I leave my computer for a few hours, it hibernates, and when I open it, it says "recovery windows" and passes it to a white screen and wont do ANYTHING.  I have to force a stop down and restart!

  Hi ColleenHowellish,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. do you have the latest service pack installed for Windows XP?

  If you are using Microsoft mouse and keyboard can refer to the article below and try the steps mentioned.

  The problems of wake the computer from sleep mode

  http://support.Microsoft.com/kb/266283

  Also see the article below and check if it helps.

  The computer leaves not put into hibernation or

  http://support.Microsoft.com/kb/815304

  If t he above step fails, then read the article below and try the steps mentioned, check if it helps.

  How to solve the problems of hibernation and standby in Windows XP

  http://support.Microsoft.com/kb/907477

• How can I set bookmarks firefox to vista on the old computer file to a Windows 7 computer?

  used firefox on vista for a while. I am able to copy the profile from there that seems to have bookmarks and other personal items but win 7 professional does not reveal where to mozilla firefox data to be saved and firesfox will not let me browse the file you want to import.

  Hi jpparks,

  to find your profile directory, simply open Subject: support in a new tab and click on view in the Explorer

  Another thing you could try is Firefox Sync.

• How can I transfer my windows live mail FRO the old computer to the new?

  Original title: Live Mail

  I just bought a new computer, but I'm still using Windows 7. How can I transfer my old computer to the new Windows Live Mail?

  How import and export emails, contacts and calendars with Windows Live Mail?
  http://Windows.Microsoft.com/en-us/Windows-Live/Mail-import-backup-restore

• I bought a new computer and want to import all the bookmarks from my old computer that has Firefox 6 is installed. How do I do that?

  My old computer using Vista.
  Windows 7 Professional a new.

  Bookmarks > show all bookmarks-> import and backup - Export HTML... - on a USB
  
  then
  
  Bookmarks > show all bookmarks-> import and backup files on this USB - import HTML... -

• Old computer reinstalled XP cannot connect to the internet. Could not find the iexplore

  I have an old computer.  I reinstalled Windows XP on it about 30 days ago.  I can't connect to the internet.  I bought 2nd hand computer and I bought my own version of XP directly from Microsoft.  I can't activate.  I can not even find iexplore.  Any suggestions?  I installed a driver for the ethernet card and still nothing.

  I've never dealt with XP MCE, but from what I've seen, you can get ambiguous messages during the installation process.  MCE was never intended for installation by end users; It came normally pre-installed on computers that have the necessary equipment to support additional features 'media '.

  It seems to me that if you have to start over.  First of all, you should get a prompt for "Windows XP Professional CD2" - who wants to have the second of the two CDs.  Then you should get a prompt for "XP Professional Service Pack 2 CD." In response to this prompt, insert the CD first back in.

  Assuming that work better than before, right-click on desktop and select Properties.  If the display shows service pack 2 - which I believe it will be - you only need to install sp3.

• I have a new computer with Windows 10 and will use Acrobat 9.0 Standard of my old computer (Windows 7). I download the program for Adpbe and when I install it so I put my serial number and get the answer, it is not a number valid serial. What it takes

  I have a new computer with Windows 10 and I use Acrobat 9.0 Standard of my old computer (Windows 7). I download the program from Adobe, and when I install it then I put my serial number and get the response "is not a number valid serial. What should do? I have an account at Adobe with all my serial number

  Hi rolfb13339293,

  I would like to inform you that acrobat 9 is not compatible with windows 10.

  You can check system requirements here: Adobe Acrobat required configuration

  The latest version is Acrobat DC.

  Please let us know if you need additional assistance.

  Concerning

  Sarojini

• must take windows.old off the computer, how can I copy all documents to 8.1 documents?

  My laptop has just changed to the 8.1 now he tells me to copy my documents from 8 to 8.1, and then delete windows.old.  I can't find a way to do it.  Someone who can help?

  Hello

  To access files in the Windows.old folder, see the Microsoft guide on the following link.

  http://Windows.Microsoft.com/en-GB/Windows-8/restore-files-upgrade-Windows-old

  To remove the Windows.old folder after you have copied your files, see the followingdocument.

  http://Windows.Microsoft.com/en-GB/Windows-8/how-remove-Windows-old-folder

  Best regards

  DP - K

• I have an old computer that needs windows updates, how can I do this?

  I have an old computer that needs windows updates to insall microsoft office or even the internet. Anyone know how I could do. The computer has a version of windows xp. Thank you

  Original title: Hi,.

  What level of MS XP Home/Pro/do you have?

  Things to consider:

  What Version of Windows I have?

  Click Start, select run, type: WINVER
  Press enter
  or
  Press Windows + Pause break key

  Note the version of Windows, including the SP level.

  How to determine whether a computer is running a 32-bit version or the 64 bit version of the Windows operating system
  http://support.Microsoft.com/kb/827218

  32-bit and 64-bit Windows: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  If you need SP 2 and SP3

  http://support.Microsoft.com/kb/322389

  You will need to have at least SP1, SP1a or SP2 before installing SP3.

  Installation of SP2: http://support.microsoft.com/xpsp2getinstall

  The space of hard disk required for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947311

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  List of fixes included in Windows XP Service Pack 3
  http://support.Microsoft.com/kb/946480

• Can I transfer files from the old computer running XP to new computer before or after you move the new Vista computer to Windows 7?

  I have a computer running windows vista that I'm planning on upgrading to Windows 7. I will be transferring files and settings from my old computer running windows XP SP3.  Can I make the transfer to the new computer before upgrade Vista to Windows 7 or should I first, up grade for Win 7, and then do the transfer?  I also asked a previous question about the email, I use Outlook Express on the XP machine.  What happens to the emails, settings, and contacts once I use Windows Vista and Win 7 easy transfer to the have Outlook Express? The new computer has Outlook 2003 is installed, all the settings will automatically go to this program?

  Make the transfer later.  Everything you do is do more work for the upgrade.  It takes hours as it is.  Please use the forums of office for questions by email.  Click Office link in the banner at the top of the forum page.

• My computer won't let me not reinstall windows because he thinks that it is 32-bit and does not recognize the installation discs. Help please?

  My computer has not worked since I stopped him during an automatic update. Which I have been kicking myself since then, but the last time that he updated, he beat the computer and I panicked.

  Anyway, it won't run certain programs, including iTunes and a large part of MS Office, and no matter how many times I try to reinstall, they still do not work, saying: "side by side configuration is incorrect."

  What I want is to restore it to factory settings - all my data is secured and sustained upward. But when I put in my recovery disks (and they are the highest boot priority in the BIOS) the system takes care of the hard drive as usual. When I remove the ability to boot from the hard drive, my system no reserves at all, telling me to restart or insert a suitable disc. And when I boot from the disk and try to run it manually, by clicking ETFSBOOT, it tells me that "the version of this file is not this version of the file is not compatible with the version of Windows you are using. Check your computer's system information to see whether you need a x 86 (32 bit) or an x 64 (64-bit) version of the program. »

  I have double and triple checked this - my system is 64-bit. My records are 64-bit. As far as I know, the computer got garbled during the automatic update and now part of it think it's 32-bit (some programs are divided into sections 32-bit and 64-bit). All I want to do is to reinstall windows, but I don't know what to do because it does not recognize my discs! Any suggestions, internet?

  Thank you very much.

  In addition, if it is relevant, I'm Windows Vista on an ASUS K50IJ laptop. I do not have the windows install disc because the computer was shipped with windows installed, but I have the recovery disc ASUS (which have been used to restore my computer in the past).

  Hello

  Since you are unable to open programs like iTunes or Office, you can try to perform the system restore and check if it helps.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  About the factory restore the question, you need to contact ASUS support for additional help on ASUS recovery disks.

  ASUS support