Old computer reinstalled XP cannot connect to the internet. Could not find the iexplore

Similar Questions

• Internet connection issues "Limited or no connectivity." and "windows could not find a certificate to log on the network.

  I'm so unable to connect to the internet?

  Hello.

  I'm so unable to connect to the internet.

  Since I've renamed our WiFi network and add a WEP key, I have problems with wireless connection on my
  Windows XP computer desktop, which is a Dell Dimension 4700.

  The questions that I get connection are...

  "windows could not find a certificate to log on the network.

  "Limited or no connectivity."

  I did all the solutions I could try to fix the connection problem!

  1. once I received the message "limited or no connectivity", I click with the right button on the connection and click on repair. It is not always connect for me and I got the "limited or no connectivity message.»

  2. then, I disabled the network connection and then enabled. That no longer works.

  3. I tried to withdraw from the ordered list of connections, and it still doesn't work.

  4. I checked the driver manager, and initially the Ethernet driver was outdated and missing of its pilot. He had a yellow question mark with a black sign and yellow with an exclamation mark inside.

  5. I used DriverZone, downloaded the driver, installed and rebooted the computer after the installation of the it. Apparently, it worked. But I could not always connect.

  6 I have ensured that I entered the correct WEP key, and then adjust the settings correctly. I did it like 10 times in a row and would not always connect.

  7. I tried to go to the command prompt and typed in IP Config/All and that's what I mean.

  Windows IP configuration
  Node type: unknown
  Active IP routing: no
  WINS proxy enabled: no
  ETHERNET connection to the Local network card
  State of the media: Media disconnected
  Description: Intel PRO/100 VE Network Connection
  Ethernet card 2 wireless network connection:
  Suffix the connection-specific DNS: (EMPTY)

  8. after that, I typed the command: ipconfig/release
  and then I got this error...

  No operations can be performed on the connection to the local network, although it has its media disconnected.

  9. after that, I tried Googling for some solutions, and the solutions I found were not any use.
  A solution was

  10. opening of Services...
  Start | Run | Type: services.msc | Click OK |
  Scroll down to and double-click Client DNS | Set to automatic on startup
  type |
  Click apply | Click the Start button | When it starts, click OK
  Do the same for the DHCP Client.
  Do the same for the remote procedure call (RPC).

  and it still doesn't work.

  11. when I look in the menu network connections, I see my connection with a lock on the side, with a red X under the lock and key. In the description, I see not connected, protected by a firewall. How could I remove the internet connection firewall? I disabled the firewall and that did not work.

  12. I tried to uninstall and reinstall the network card and who does not work either.

  It is not the network itself that is the problem.  It is not the modem or the cable. There are no disconnected son or something like that. We have other computers in the House and the internet works fine on other computers. As I said, since I renamed our WiFi network and added a WEP password, I had problems with connecting to my Windows XP computer.

  My computer has updates that must be installed as well. Updates would fix the problem? I just need to have internet.

  What should I do? Thank you for your time.

  Sincerely,

  Justin

  Have you tried to set the value of the link speed/duplex mode? I had the same problem you describe. Your card is only capable of 10/100 communication.

• Reinstalled XP - cannot connect to the internet

  Hello.  I have an Asus Eee PC 900, which I restored to factory settings, using the XP disc that comes with it.  However, I can't connect to the internet.  By the way I'm having exactly the same problem with my Eee PC 701 with Windows XP, after restoring to factory settings too (have installed Linux and it connects fine) so I think it's an XP thing.

  The pc displays available networks, I tried everything that I know, have set up the network and typed in my network key.  When I try to connect, nothing happens.  If I try to fix it, I get the message Windows could not finish repairing the problem because it is impossible to perform the following action: connect to the wireless network.

  I tried:

  (1) to reinstall the driver (it says it of Ok, and is the last being listed).
  (2) setting the date and time correctly on the computer.
  (3) check that 'enable IEEE... '. "is checked, authentication
  (4) turn off ' use Windows to configure my wireless "(but if I do, no available wireless networks appear)

  I wonder if Service Pack 2 is simply too old to connect to internet!  Is there anything I can download on my other computer on usb and install it on either an Eee Pc?  Like Service Pack 3 or something?

  My network is WPA2 Personal

  The box to "enable authentication IEEE 802. 1 x for the network"must NOT be checked.

  You should have installed Service Pack 3 for your restoration efforts.  Unpatched, Windows XP Service Pack 2 is not able to connect to wireless networks that use WPA2 encryption (which is what you are - and should be - aid).  Older hardware may also be unable to connect using WPA2, but this doesn't seem to be your problem because you connected before the restoration and that you can connect now using Linux.

  There is a catch-22: Windows Update will not install updates for XP (including Service Pack 3) except if you have installed Service Pack 3.

  Connect your computer to your router with an Ethernet cable and do the following:

  • Read http://support.microsoft.com/kb/950717
  • If your PC is a HP Pavilion and Presario, Media Center and has an AMD processor, install the following hotfix before you install SP3--> http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=uk&lc=en&dlc=en&softwareitem=pv-60484-2
  • Download SP3--> http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=24 (ignore warnings about the network facilities and computing professionals)
  • After you install SP3, go to Windows Update and install post-SP3 updates a lot; several reboots will be probably needed
  • Now, follow these steps to retrieve your wifi connection:
  1. Right click on your wireless connection icon and select Properties
  2. Select the wireless networks tab
  3. Confirm that "Use Windows to configure my wireless network" is CHECKED
  4. Remove all entries in the list of "preferred networks".
  5. Click 'View wireless networks,' select yours, enter your WPA2 password carefully, then click on connect

  If you are unable to connect your computer to the router with an Ethernet cable for a reason, use another computer (for example, the one you use to ask questions here) to download the patch from the HP site and program installation of SP3 from Microsoft of the site and to copy on a USB or burn it to a CD.  Then copy the files on the desktop you're your computer and run them as if you had downloaded them.

• Computer Windows XP cannot connect to the gateway of media converter where as Linux machine can.

  In my office, we have 2 internet connections in the 1 come from media for Cisco router converter and then switch and 1 other comes through router dlink Media Converter and then to the same switch since 1 connection uses the gateway 1 and another 2. In this scenario when the system windows xp or Linux system if uses gateway 1 net will properly and in a way even when windows xp system attempts to use gateway net 2 will come not wat is not here in this scenario pls help me...

  original title: network problem

  Hi Manas,

  Since you are still facing problems, you can ask your question in the Forums TechNet's Windows XP for assistance.

• Unable to connect network [11001] error: could not find [localhost:2423]

  Hi all
  
  Unable to connect to Essbase Excel addin.
  
  When I click on sign in in the menu essbase.
  
  I fill the details such as the server name, user name, and password.
  
  It connects and dosent show applications or database.
  
  If I give the name of the server = servername:2423 (as a port not) I receive this error network error [11001]: cannot find [localhost:2423].
  
  I edited the host file also.
  
  I have two instance essbase. We're on the default port and another on no. 2423 port.
  
  Essbase server: 9.3.1
  
  Essbase client: 6.x
  
  Help, please.
  
  Kind regards
  Mink.

  AGENTPORT

  and NODENAME need your server name.

  Published by: RobertR3 on May 8, 2009 14:46

• Your computer cannot connect to the remote computer

  Hello

  OT:

  Your computer cannot connect to the remote computer because the remote desktop gateway server address request and the certificate subject name do not match. Contact your network administrator.

  I implement the remote desktop session based on Win Server R2 2012.

  I create a free sign for certificate certificate and also install the certificate to the client computer.

  But when I click on any application it shows me error.

  

  Hello

  You may need to ask the question on the TechNet forums. Please post the question here:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Kind regards

• Remote Desktop cannot connect to the remote computer

  Hi all

  I'm having a problem on my server running Windows Server 2008 R2.

  I can not can not on the remote server by using remote desktop (mstsc).

  Here is the error I get when connecting:

  Remote Desktop cannot connect to the remote computer to one of the following reasons:
  (1) remote access to the server is not enabled
  (2) the remote computer is disabled
  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.

  I tried to restart the services, but nothing helped.

  I even restarted the server, which did not help.

  Also, I can ping the server without any problem.

  Kindly help. !

  Hello

  Search logs events on the Terminal Server and the Local user's PC

  Try disabling the firewall - may have to be reconfigured.

  I suggest that repost you the question in the TechNet Windows Server forum for assistance.

  TechNet

• Remote Desktop cannot connect to the remote computer to one of the following reasons:

  We are using Windows server 2003 sp2 & windows xp professional sp3. We want to connect to the server using Remote Desktop, but we get the following error:
  --------------------------------------------------------------------------------------------------------------------------------
  Remote Desktop cannot connect to the remote computer to one of the following reasons:
  (1) remote access to the server is not enabled
  (2) the remote computer is disabled
  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.
  --------------------------------------------------------------------------------------------------------------------------------
  We have enabled remote access on the server & the user is member of admin & users group to the remote desktop on the server. The firewall is turned on & exceptions for port 3389 remote desktop.

  Could you please help us on this.

  Hello

  Search logs events on the Terminal Server and the Local user's PC

  What is happening to all users?

  -If you get an error in the TS, then this is a client-side problem.

  -Take TCP Dump using wire shark and see who is the RST sendign package.

  Look for this error message in google that could give you light...!

  Kind regards

  Dhruv

• Windows cannot connect to the Internet using HTTP, HTTPS or FTP. __This is probably caused by settings of firewall on this computer. __

  I recently installed the version of Norton, after that I was unable to use the internet, I thought it was the Norton firewall settings. After having playing with her for 30 minutes, I gave up and uninstalled Norton. I have disabled the firewall, I have reset the default settings. Here is the message I get when I run a diagnostic. A crazy thing is that I can connect to internet when I connected to this same computer as a guess.

  Please help me!

  Windows cannot connect to the Internet using HTTP, HTTPS or FTP.
  This is probably caused by the settings of firewall on this computer.

  Check the settings of firewall for the HTTP port (80), HTTPS port (443) and FTP port (21).

  Hi rhonda9937,

  1. what browser you are using to connect to the internet?

  It is not recommended to keep Windows Firewall disabled on the computer.

  This would happen if the ports are not open in the Windows Firewall.

  I suggest that you open ports in Windows Firewall and check if it works.

  How to manually open ports in Internet Connection Firewall in Windows XP

  http://support.Microsoft.com/kb/308127

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  http://support.Microsoft.com/kb/875357

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer cannot connect to the internet, the signal is excellent in the modem, but the computer does not recognize that there is a link.

  My computer cannot connect to the internet, the signal is excellent in the modem, but the computer does not recognize that there is a link. What could be wrong?

  Hello

  • What connection do you use?
  • What is a wired or wireless?
  • What happens when you try to start Internet Explorer?
  • You receive an error message?

  You can check these links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://support.Microsoft.com/kb/956196

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• You cannot connect because the logon method, you use is not allowed on this computer. Please, see your network administrator for more information.

  Whenever I enter my correct password in my windows account it rejects a message and it comes up saying: "you cannot connect because the logon method, you use is not allowed on this computer." See your network administrator for more information. "I can't seem to be able to enable or disable anything because the profile I'm using on my computer is the profile of"Guest ".

  Karima,

  Applicable to Windows 7.

  The following steps require administrator credentials.

  • Use the Windows + R or "Run" in the start menu, then type gpedit.msc.
  • Navigate to Computer Configuration > Windows settings > local policies > user rights assignment > consider all policies "prohibit the newspaper on" to check if your guest account is listed. Remove account from the list, and you should be fine to continue using your guest profile.

  Good luck.

  James

• Windows 7 RDP refuses the connection, this computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  Error is the standard:

  This computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.

  When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.

  No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.

  All computers on the domain work for RDP is only now a single computer.

  Error is the standard:

  This computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.

  When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.

  No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.

  All other computers on the work of field for RDP is only now a single computer.

  This post on the forum of MSFT Services Office to remotely help...

  http://social.technet.Microsoft.com/forums/en/winserverTS/threads

• WINDOWS 7 (computer gateway NV53A AMD Phenom II x 3 N830) cannot connect to the internet

  Hello!

  I bought a Gateway NV53A AMD Phenom II x 3 N830 computer about 1.5 years. It was working great until a couple of days. I was browsing through Facebook and then all of a sudden I had this virus called "Security Scan" and it started to scan my computer and I couldn't stop. I removed this virus with a YouTube video, but since I learned that the virus of my computer is unable to connect to the internet. I have other computers connected to the internet. All of them work properly. In the lower right, I have internet bars and it says that I'm connected to '2wire400' but '2wire400' is not connected to the internet. In addition, on the symbol of the internet, I have a triangle that is yellow with a «!» I tried turning off the modem about 14 times. I did ipfigure cmd or w.e that nothing works.
  NEED HELP PLEASE!

  Hello!

  I bought a Gateway NV53A AMD Phenom II x 3 N830 computer about 1.5 years. It was working great until a couple of days. I was browsing through Facebook and then all of a sudden I had this virus called "Security Scan" and it started to scan my computer and I couldn't stop. I removed this virus with a YouTube video, but since I learned that the virus of my computer is unable to connect to the internet. I have other computers connected to the internet. All of them work properly. In the lower right, I have internet bars and it says that I'm connected to '2wire400' but '2wire400' is not connected to the internet. In addition, on the symbol of the internet, I have a triangle that is yellow with a «!» I tried turning off the modem about 14 times. I did ipfigure cmd or w.e that nothing works.

  NEED HELP PLEASE!

  Many viruses will assign a static IP address in the TCP/IP settings, try the following:

  1. Open network connections by clicking the start , and then clicking Control Panel. In the search box, type adapter and then, under center network and sharing, click view network connections.

  2. Right click on the connection that you want to change, and then click Properties. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Click the network tab. Under this connection uses the following items, click Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6), and then click Properties.

  Double check and make sure obtain DNS / IP are both checked on automatic.

• Cannot authorize Digital Editions - says could not connect to the activation server

  I use Adobe Digital Editions 4.5 on a Windows 7 computer.

  I was using Adobe Digital Edition to read library books, then decided to allow if I could access my library of books about elsewhere. I downloaded a few books, and then I started having authentication errors. I couldn't erase the authorization through Adobe Digital Editions to try to do it again, I kept getting errors. I followed the instructions to change the registry, which withdrew the authorisation of old, and I can now, select "authorize computer". But when I enter my Adobe ID and password, I get the error message:

  "Digital Editions cannot connect to the activation server. Please make sure that you are connected to the Internet. »

  My computer is connected to the Internet - that's how I am connected to this discussion. I've uninstalled and reinstalled the software, Adobe Digital Editions, and the same thing happens.  Any suggestions? I prefer Adobe Digital Editions alternatives, but if this activation problem can not be solved I won't have the choice.

  I read through other similar positions and found one that says what they uninstalled 4.5 and installed 3.0 instead. I did this and was able to authorize ADE (no internet connection problem) and again to download eBooks from our library.

• Help! Safari cannot connect to the server

  I really need help! I tried to forget the network and turning it back on, I have disabled the firewall and remove all extensions of safari. I seems that nothing works.

  I get the message 'Safari cannot connect to the server' on almost every site except this and facebook. I can't enter same Urbanoutfitters.com or ASOS. I just got the message "Safari could not connect to Server" I'm not a computer genius so hopefully someone here can help me...

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.