SSTP will not start. Error 2.

Similar Questions

• CD player does not. Not changed anything on computer. says will not start error code 10.

  I have Windows vista on my computer. I tried to play a cd and burn also. The drive does not at all. The light comes on, it runs for a second or two and then stops. I checked the updates for the drive and there is not. It is coming up with an error code 10. States, it does not start. I tried to find a solution for this and found nothing. HELP PLEASE?

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows xp hp will not start. error message: Windows has not start because the following file is missing or corrupt: &#60; root windows &#62; \system32\hal.dll. Please re - install a copy of the above file.

  Hello, I recently restored my windows hp tower to its factory because of virus settings and when I restarted my PC I recieced this error message: Windows has not start because the following file is missing or corrupt: \system32\hal.dll Please reinstall a copy of the above file.  where can I get a copy? and is it possible to download the start software and burn it to a cd?

  Hi FRANKGRIMES_945,

  What is the model of your computer?

  (a) you can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your machine.

  (b) thereafter, follow this link & check if you are able to start correctly on the desktop.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.
  Please post back and we do know.

• Sansa Fuze - device will not start error 10

  I know that it's all over the forums and believe me, after trying the support of Sandisk I scoured the entire internet and put into service each available remedy.

  Here's the deal. I have a brand new Sansa Fuze 4 GB. After taking its packaging, I plug it on my desktop (Windows XP, SP2) and I get the message "USB device not recognized". I tried every single USB port, including a self-powered USB hub.

  I am the administrator on this computer and I added myself as a "Net localgroup Administrators local service' - whatever the hell that means.

  I have installed and reinstalled WMP 11 and the MTP Porting kit. I tried all of the fixes in MSC mode. I tried all the fixes on three separate, all computers running the same operating system - one is a laptop.

  I contacted the helpdesk of SanDisk and their corrections were more extensive that I found on the internet, the results have not changed.

  So, if someone can help me. I don't understand why this unit is so full of bugs. I don't understand why it will not work right out of the box as announced. It's actually a Christmas gift for a friend, so the clock is ticking. I wanted to have this thing set up before unleashing it on it. I'm sure that some bugs he get up and running should be echoed on his computer!

  Brand new? Bring her back. You probably have a lemon. Or have SanDisk replace it. \

  Edit: You could also have a bad power cord. But this the heck, replace all the way.

• Windows Firewall and Security Center will not start, error 1068 and 1079

  I can't start my firewall Windows, error: 1079... or Security Center, error: 1068. Can help you with this question? When I try to access the Dependencies tab I get this error: Win 32: the specefied for this service is different from the specefied to account for other services running in the same process.

  I checked to see if dependencies were the same account before I got the message of 'Win 32' and WMI Service runs in the same account (Local Service) as firewall and Security Center, but the RPC Service is running on the Network Service account and cannot be changed via the services console, because the account fields are gray and cannot be viewed or modified. I try to avoid using the tool 'SubInACL' because I don't want to reset the whole registry.

  Help, please!

  The other post:

  I had a problem with obtaining the Windows Firewall and Security Center to start. Service account permissions have been changed at some point, including the depedencies. I get the error 1079 on the Windows Firewall and 1068 on the Security Center. Both are defined on the Local Service, but dependence, the CPP is set to Network Service and cannot be changed because the user fields are gray. I try to avoid using the SubInACL.exe because I don't want to reset the whole registry. Can you help me please?

  No, I'm not on a domain. I connect via a open wireless "hotspot". My main problem is; I don't have a Firewall or Security Center. Nor will begin. I get the error: 1068, to Security Center and an error: 1079 on Windows Firewall. When I try to access the dependencies on either I get this window:

  WIN 32: The account specified for this service is different from the account specified for other services running in the same process.

  A month ago I made the mistake of trying to brand of ACDSee of security, "ACDOne" which includes software "BitDefender". That's when I lost my firewall and Security Center. BIG MISTAKE! I uninstalled and deleted all the files that I found that have been left.

  My Security Essentials and Windows Defender work very well. I'm stuck and need help with this please! Please, I beg you! Someone... Help!

  The system cannot find the specified file.

  http://support.Microsoft.com/kb/947821>

  After you download and run the system update readiness tool, restart your computer. Then, immediately try to install the updates.

  UTC/GMT is 02:51 Wednesday, April 25, 2012

• Printer spooler will not start error 1053

  Hello

  I got a Lexmark X 4550 printer installed on my Windows 7 x 64 inspiron for a few months now. Steeplechase the printer would not print that's never happened before. When I went to devices it says there was a problem with the printer and she needed troubleshooting. The store could not find a solution. I found a few fixes suggested online and you have tried without success. However, I discover that the printer spooler has been arrested. When I tried to restart services it came with an error that says: -.

  Windows cannot start the service on the local computer printer spooler

  Error 1053: The service did not demand launch or timely control.

  I checked that it is configured to run automatically, and when I checked the dependencies that I discovered that the remote procedure call was arrested and the manual value. I have reset automatically and it started successfully. This did not however fix the printer spooler error.

  I uninstalled the lexmark software and tried to delete the printer driver - this has not helped either.

  I also tried the following: -.

  Open a command prompt window

  the control key;
  dependent on the spooler of sc config = RPCSS

  Restart the print spooler

  This did not help also.

  I tried the list in the folder of the coil of compensation, but there's nothing in it.

  I totally ideas, suggestions on how to fix this? I think that Windows had a fix for this problem on XP and Vista, but I can't find one for windows 7. Any help would be greatly appreciated.

  James (and all those who have contributed so far),

  I found this offer on the Microsoft Answers site forum.  It's by a guy named encro.

  Let me know if it works, I don't have access to a printer for the moment.  I'd be more interested in your results, whether it is successful or not.

  The solution: get the spooler to start!

  This seems to be a very common problem on Windows 7, caused by a recent update 'Important' within the late March/early April. I found the fix for this while working on a clients machine and noticed something abnormal in that the print spooler was not actually the print spooler it is why it wouldn't start. Now that our team have set about 20 machines using this process, I'm confident enough, that this is workaround until a future WSUS update corrects this correctly. It's still speculation at this point because log files have not really brought to this day a lot of troubleshooting help this and it can be not linked to a KB from Windows Update.

  I'm still trying to determine the real Windows Update update that caused the problem to inform Microsoft of bug but the problem goes something like this:

  Determine if this is the case on your computer.

  Verify the existence of spoolsv.exe.org and spoolsv.exe in %windir%\system32 (C:\Windows\System32)

  If both exist then it is likely the following problem.

  Compare the spoolsv.exe file size
  
  Sometimes the real spoolsv.exe is called spoolsv.exe.org [545KB] and instead of spoolsv.exe place will actually be a file 41KO posing as the print spooler. I guess the system saved the original spooler at a given time and accidentally replaced it with something else. Spoolsv.exe should be the file 545KO at this point.

  Correction of the problem

  Step 1: Spoolsv.exe and rename it spoolsv.bak

  Step 2: Spoolsv.exe.org and rename spoolsv.exe

  Rename spoolsv.exe.org here is a bit more tricky because it requires to change the property file from TrustedInstaller to the administrator group and giving the full group write permissions for the file. Without doubt, this has security implications, it is recommended to restore the permissions once the file is renamed.

  By changing the property of the file from TrustedInstaller to administrator then activation full of change to the administrator group, you can exchange files by the name change and correct this problem.

  I usually and rename spoolsv.exe spoolsv.bak and then rename spoolsv.exe.org to become the real spoolsv.exe.

  Step 3:

  Start the print spooler via Services (services.msc) or at the command prompt by using net start spooler.

  Moment<3 from="" the="" spooler="" and="" a="" major="" headache="" for="" many="" people="" finally="" fixed="">

• Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process.

  Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
  Tried running firefox.exe Pei but error message:

  XML parsing error: the undefined entity
  Location: chrome://mozapps/content/profile/profileSelection.xul
  Line 18, column 1:
  "< dialog < =" "^ =" "p =" "> < / dialogue >

  Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.

  Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)

• Updated the macbook pro of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

  Updated macbook pro today for the latest version of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

  It would be helpful to post what the screen says.

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250.

  Internet, not able to browse computers on the network

  The computer has internet access, but I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250. Also in the event log Workstation reports: could not load RDR device driver. Cannot run the sfc in safemode, gives the 0x000006ba error, the rpc server is unavailable. Runs under normal windows, noticed in the registry last run: 0x000003e3 error code (try adding c:\windows\system32\drivesr\i81xnt5.sys to the dllcache)

  I'm puzzled.

  Hello

  I suggest you to send your request in the below link.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Hi ipitedafoo,

  You can check if this article helps.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  See also:

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

• "Error message: Verifing DMI pool Data data ', 'Boot from CD' and Vista will not start.

  Vista will not start. Yesterday I had a remote assist of a tech trade SPS who took several Java updates and installed the recommended Java version. Until I left work the day I closed my computer so that he could install the updates from Microsoft. After the updates were finished I he turned and left for the day. When I arrived this morning, I had was a black screen and 2 lines of text following: 'Verifing DMI pool data' and 'Boot from CD' and a cursor flashing beneath them. I downloaded and executed a Western Digital utility that showed no problems with the hard drive, put in on the installation disc repair service is no error. I did a system restore to a point since yesterday morning, and Vista still does not start. Any ideas or suggestions?

  Hi JohnHorky,

  Step 1:

  First check and make sure that all physical connections on the computer are correct.

  Step 2:

  Alternatively, you can try to run a Checkdisk and check.

  a. Insert the installation disc.

  b. restart your computer.

  c. click on the Start button, click the arrow next to the button lock and then click on restart. If you are prompted, press any key to start Windows from the installation disc.

  d. choose your language settings, and then click Next.

  e. in the System Recovery Options menu, click command prompt

  f. at a command prompt, type the following command and press ENTER

  Chkdsk /f /r X: (drive letter)

  Note: When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.

  g. press y when you are prompted to check the drive the next time the system restarts.

  h. close all applications and restart the computer.

  Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk.

  Step 3:

  Check if the automatic hard drive in the BIOS (Basic Input/output System) is enabled and save settings and check if it works. If it doesn't, contact the manufacturer of the system for more support options.

  I also suggest that you install the latest update of the basic system of input/output (BIOS) on the computer by contacting the manufacturer of the computer and check if it helps.

  Important: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful.

• Error 711; Remore access connection manager service will not start

  Error 711; Remore access connection manager service will not start

  Hello

  Thanks for posting your question in the Microsoft Community!

  When exactly do you get the error message?

  This error message appears when a required service is not started on your computer. You won't be able to connect to a network, and you might not be able to install network cards.

  This problem may occur if some or all the following services are not started:

  • Plug-and-Play
  • Remote Access Auto Connection Manager
  • Remote Access Connection Manager
  • Telephony

  You can see test link following the steps and check:

  Get help with "Error 711" message

  http://Windows.Microsoft.com/en-us/Windows7/get-help-with-Error-711-message

  Do not post the State of the question.

  You can always view in Microsoft Community if you need help with Windows.

• error code 213:19 what is?  Photoshop Elements will not start past this error message.

  What is the error code: 213:19... Photoshop Elements will not start past this error message

  Error 213:19 | Problem is the license for this product

• Hello plug-in currently creative cloud and asked me to do an update, it will not start because there is an error code of 2. Comment do?, Hello plug-in currently creative cloud and asked me to make a bet to

  Hello plug-in currently creative cloud and asked me to do an update, it will not start because there is an error code of 2. Comment do?, Hello plug-in currently creative cloud and asked me to do an update, it will not start because there is an error code of 2. make a comment?

  Error code 2: Creative Cloud Desktop app update failed:

  https://helpx.Adobe.com/creative-cloud/KB/Error_Code_2_failed_update.htmload