Software does not work after software update to latest El Capitan

Similar Questions

• my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  Once iTunes to work properly, you should be able to fix your device.

  TT2

• AutoFill does not work after last update 3-6-3

  AutoFill does not work after last update 3-6-3

  is after update

  See control if Firefox automatically fills in forms

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

• my super USB does not work after last update OS EL Capitan

  my super USB does not work after last update os el capitan

  Hi viral_02,

  The resources below provides a few for the SuperDrive USB troubleshooting steps.  Click on the link to see all the possible symptoms and solutions, including resetting the system management controller.

  Get help with the SuperDrive slot on your Mac computer loading

  If the problem persists, Contact Apple or an provider of services authorized Apple, or make an appointment with an Apple Retail Store additional diagnosis, evaluation, or service.

  Take care

• RDP does not work after the update of the virtual machine tool

  There are many machines these RDP does not work after last update VM tool.

  Hello

  Please replace RDP linked DLL file from any server to work from the same version of the OS...

• Bitmoji keyboard does not work after last update iOS 10

  My Bitmoji keyboard does not work after that I updated to iOS 10 update. I have no idea why, my friends Bitmoji keyboard works fine after that she has updated her phone and mine does not work so I was wondering why. It worked perfectly fine before I upgraded my phone. I was wondering what to do.

  the same problem. He repeats to me go to keyboard settings and make sure that it says allows full access to Bitmoji and it does. Should not have upgraded to iOS.

• Satellite Pro C850 does not work after Bios Update

  My satellite pro c850 cd does not work after updating the bios of toshiba.

  What should I do?

  Saying: don t work do you mean it does not fuel upward or what do you mean exactly?
  Flash the BIOS correctly?

  Maybe something went wrong during the upgrade, which means that l ROM flashed module isn't properly

  In most cases a special disc of crisis of the BIOS would be required to operate
  Not sure if you can get it repaired by your own
  Check this thread. Maybe this helps:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59637

  Otherwise you need help of the authorized service provider available in your country.

• Satellite A210 - 19(d) - Toshiba Disc Creator does not work after last update SP2

  Satellite A210 - 19(d), HomePremium Vista 32.
  Toshiba Disc Creator does not work after update to sp2. Error code is 32007C-26-00000001.

  He needs to click ok up to 17 times to eliminate the error window, but it is more.

  Everything was OK before sp2.

  Please take a look in this thread:
  https://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=60687

  It user pdun459 had the same error using the Toshiba Disc Creator and could solve this uninstall and installation of this new

• Wireless does not work after Windows Update

  Original title: Wi - Fi internet connection is DISABLED since yesterdays upgrade, how can I get that back on?

  Since a windows update yesterday, before closing my laptop... I am not able to access the Internet.

  My without wire is off and I can't turn it back on.  Toshiba wants $99 for technical support.

  Hi Sheryl,

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  Wireless does not work after a windows update.

  1. what day that was installed?

  You can check the update in the update history:

  See the Windows updates are installed

  http://Windows.Microsoft.com/is-is/Windows7/see-which-Windows-updates-are-installed

  2. do you receive any error messages?

  3. What is the model of the computer?

  The problem may be with the drivers or with the device.

  I suggest that you refer to the procedure described in the site:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• Satellite C50D-A-12 x - touchpad does not work after Windows Update

  the touchpad does not work after the windows updare

  I always recommend you read other threads / messages and spikes before considering opening new thread in the forum
  https://Forum.Toshiba.EU/showthread.php?82878

• Pavilion dv7-4270us: dv7-4270us bluetooth does not work after driver update

  I recently updated my drivers from the HP website.  Now, I know it was a mistake that bluetooth has not been installed correctly.    And there is no option "driver restore.  I tried several times sp50180, according to the HP website and also tried the old version listed (sp49153).   They old version did not install correctly and a new seemed especially, but none of my Bluetooth devices that used to work to do now.   I can 'connect to' some devices but they cannot transfer photos, connect to the audio, etc.  Some devices that are used to work can still be seen when I say "add a bluetooth device".  After installation, in the Device Manager, I find the following:

  The radio Bluetooth: Bluetooth Broadcom 2070 and Microsoft Bluetooth Enumerator (both working properly)

  Human Interface Device: Bluetooth Remote Control (works)

  Modem: Modem Standard via a Bluetooth #2 link (works)

  Network cards (all working correctly):

  Device Bluetooth (personal area network)

  (Heading RFCOMM Protocol TDI) Bluetooth device

  (and my other network devices, all functioning properly also)

  Other devices: this is the problem area.  After installation and reboot, I always find myself with 10 entries "Bluetooth Peripheral Device", all with a yellow exclaimation mark and all say real estate "Other devices", "unknown" (GSM) and the location is "on Microsft Bluetooth enumerator". "."

  I tried right click and uninstall it, but when I reboot they come back to the top, search windows update, but can not find a driver and go straight to the "other devices".  I also tried to uninstall the "Broadcom 2070 Bluetooth 3.0" 'Programs and features' and right-click to delete each listed above bluetooth driver and then run the sp50180 again and it will install without error and find the same above drivers that work and leave the same 10 does not.  And my Bluetooth headphones (two different ones) is more work (or can be seen) and my Bluetooth phone can be 'connected' but any attempt to transfer fails.

  I've exhausted all ideas on the web, I could find, and none have helped.  I tried to load a restore point, but after having so many pilot facilities, there is no point of restoration with the appropriate driver.  A full backup of the system on another drive, but much changed the applications and data files so I cannot restore it.  Unless someone knows how to use a full backup of the Windows 7 system to restore only the Bluetooth driver.

  Another idea is that the driver update that messed up things maybe changed some other file or a registry setting that is not corrected by sp50180, but that seems unlikely.

  Is it possible to manually install each of the 10 'other devices' drivers?  If I right click on a defective device and select "update driver software" no matter if I select the drive C:\ or F:\ (my driver and software download drive) or automatic search (including online) - it does not find the driver files.  I also tried to select properties and 'put to day driver' but the same results.

  Any help would be greatly appreciated.

  I found a solution. I received a call of support in Mumbai.  HP gave me a free call because they were not able to set a guarantee repair questions, so gave me the free support call.  I took an hour, but ended up the solution was very simple.

  There were these problems:

  1) 10 'other devices' in device with the exclamation points Manager can be uninstalled, but still were automatically reinstalled with the same exclamation point.  No pilot was available to the public for them.

  (2) my phone under Bluetooth devices could connect but would not photos transfer.

  (3) neither my helmet Bluetooth would not work.

  The solution was simply to go to 'Show Bluetooth devices' and right-click on each and select 'Delete device' (even if dimmed they might still be revoked).  After all have been abducted there were no "other devices" in Device Manager.  I then added each Bluetooth device again.  This was very well all work.  I also noticed my phone was five drivers "Bluetooth Device" was so 5 of the 10 exclamation points himself.

  For some reason, deletion of the driver in the Device Manager has not deleted the list "Bluetooth Device".  And by uninstalling and reinstalling the drivers, it does not work.

  If the answer is simple.  Before removing the drivers Bluetooth first remove all Bluetooth devices.

• Help, INternet explorer does not work after windows update

  One day, the computer automatically downloads and installs the programs that are recommended by microsoft windows.
   
  After installation, my INternet explorer does not work.

  It reads:

  Windows could not access 'ie.redirect.hp.com '.
  Windows received an HTTP error message: 403 (refused).
  -> If this problem is consistenly prevent windows to connect to several sites on the Internet, contact your network administrator or your ISP.

  Then I click ok, and then try to go on 'www.google.com '.
  It still does not work, so I click on diagnose connection problems
  This time, it reads:

  Windows not found no problem with the network connection on this computer.

  You want to report the problem to Microsoft? Additional details about what went wrong can help create a solution. The report will be sent the next time you go online.
  Send information

  But when I send, I can not because I have Canon go online on my Internet Explore.
  When he first stopped working, I could use the system restore, but after a few months I dropped and now I can't restore the system to a place that it worked fine.

  I also know that this problem is not the administrator of network or something like that because I downloaded Firefox when IE stopped working, and Firefox works fine.

  I tried everything, but I can not do it by myself, so help please!

  @ceda only: See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Satellite A300-20 b - Touchpad does not work after BIOS update

  I've updated the BIOS on my Satellite A300-20 b latest version 2.00. Update succeeded, but when I rebooted system touchpad has stopped working.

  I tried to find the solution, resettled drivers (windows XP system). In the Windows Device Manager there is no problem with Synaptics PS/2 Port Touchpad, I see. Software Synaptics shows no problem I can enable and disable the touchpad, but it does not work for the touchpad. I tried Linux live CD and in this system does not work as good touchpad. I think there is problem in this version of the BIOS.

  Does anyone have the same problem?

  Hey Buddy,

  Have you tried to turn the touchpad on or off if you press FN + F9? Check this please!
  Also, try to load the default settings in the BIOS.

  What happens if you connect an external mouse to the laptop? It work?

  I can t imagine that the BIOS update causing this problem. If it doesn't work, you need to contact a service provider for help. They can check the touchpad and replace.

• Satellite A500-17 x - micro does not work after BIOS update

  I have a Toshiba Satellite A500-17 x which I have just updated the BIOS to version 2, as recommended by the tempro software. Now with the new update my microphone does not work. Where can I download a copy of the old BIOS?

  ({I used winphlash64 in advanced mode to restore the original backup, it does to the computer, but it just gives the new bios to}) Thank you rich

  Hello

  BIOS cannot be demoted in windows mode.
  Even if you use an older version of BIOS update, you will get an error message saying that the latest BIOS version is already installed. So, forget the downgrade.

  By the way: I put t think the update of the BIOS assigned the microphone.

  Go to control panel of-> sound-> recording tab.
  Here you will see all the available recording devices (micro)

  Activate the microphone it (in this case the people with reduced mobility) and set its default value.

  Where it works: reinstall the audio driver.

• WiFi does not work after last update 4.3 android

  Hello, I've updated my Xperia TX for andorid 4.3

  but the wifi does NOT work!

  and I have no screenshot option.

  Please what can I do?

  In this case, I suggest that you try to reinstall/repair the phone using PC Companion software:

  http://www.sonymobile.com/update

  In PC Companion, press start on the support Zone > begin on updating the software of the phone/Tablet > press the blue link that says "repair phone/tablet.

  Before repairing the software of your device, you can back up your information first. See this topic for more information on how to:
  http://talk.sonymobile.com/T5/FAQ/backup-amp-transfer/m-p/407253#U407253

• Epson v500 Scanner does not work after driver update!

  I recently bought a V500 photo and scanned my first 35mm using Epson Scan v3.7.4 negatives. The colors seemed off so I download and installed the latest v3.7.7 of support to Epson.ca hoping that it might help.

  Following the upgrade of the driver, the scanner has stopped working! Loads of Epson Scan, but after 5-10 seconds, I get the message: "no response from the scanner. Make sure the scanner is turned on and connected properly. If you use the transparency feature, remove the reflective document mat. »

  Then I restored the latest install w / restoring Windows but still could not get the job to scan. I drove back to the pre - Epson scan install date and tried to reinstall the earlier version but still no luck to get scanner work.

  I then followed the steps of uninstall on the Epson.ca support site removed all the drivers and the software with the scanner turned off and unplugged. Then I reinstalled the old version of Epson Scan of the CD because he had worked at the start. I reconnected it the scanner it plug it in and turn it on. But it still does not work! Ditto for uninstall and reinstall with the latest drivers.

  Notebook P7350 using Windows 7 32 bit SP1. Scanner is connected directly on the laptop, not through a hub. I tried all 3 ports USB in the hope one would work, but no luck. All connections between the pc and the scanner seem robust.

  Any suggestions to get scanner work?

  Thanks for the reply of adeline. In the meantime, Epson come back to me when I contacted them again but only after I have disabled cookie blockers in Firefox when visiting their support site. The first time I've done this, and the support form has not sent correctly.

  It turns out that the scanner must be completely turned off and unplugged then reconnected after that driver installed. I discovered one of the records was not too tight that it should have been :-0 if I was sure I had checked it earlier.

  Thanks again.