Windows will not restart after running updates.

Similar Questions

• iPad will not restart after the update iOS9.3. Should force us the reboot?

  iPad will not restart after the update iOS9.3. Should force us the reboot?

  By restart do you average will not turn on?

  There seems to be a bit of a problem past, especially with older models of iPad 2. Some people have reported success after that restore their device via iTunes, for others that it has not worked and all they get is a message "bring it in an apple store.

  Since it affects a lot of people, I think it's safe to say that the problem lies in the range of Apple. But I don't think it is recognized or no matter what put forward fix.

  You can try to restore your device, or you may just be stuck waiting to see if a fix comes out.

  http://support.Apple.com/kb/HT1414

• New passport Passport brand blackBerry will not restart after the update - flashing led Red

  Help...

  Unboxed, updated (sim card not yet in)-restarted

  Black screen, won't do anything outside flash its LED.  Sequence is flash, pause, six fast flashes, long break and start over again once.

  Have you tried dialing 30 days of free support, but guess what, you can get no further than to hear the options.

  At the present time - not feeling the love... (RANT ON)

  Hi Wolf, strangely enough, shortly after my post the BlackBerry support number worked, and the nice man on the end of the line follow the same procedure as you suggest. Everything now fine and dandy! Thanks for your comments

• PC with Windows Vista does not restart after installing updates, "Windows could not start...". "File:\Windows\system\winload.exe status: Oxcoooooof.

  Last night, I installed Windows updates on my HP Pavilion dv6227cl and now Windows will not boot.  I get the message "cannot start Windows.  A recent hardware or software change might be the cause.  File:\Windows\system\winload.exe status: Oxcoooooof Info: the selected entry could not be loaded because the application is missing or damaged.  I DO NOT have the Windows Setup disc.

  Hello

  I suggest you borrow the CD of windows vista to your friends

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you be able to start your computer in safe mode, I'd say make clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to see link and check.

  Error: Windows could not start. A recent hardware or software change might have caused the problem after installing Windows updates

  http://support.Microsoft.com/kb/2674065

• Windows 7 will not restart after an installed cleaning

  After a clean install of windows 7, it will not restart when you click on restart. It just goes to the screen to the motherboard. If you go into the bios, windows will restart by clicking on the disk that contains windows 7. How to make computer restarts correctly?

  It is probably an incorrect configuration in the BIOS boot priority setting.

  When you install the operating system, you usually change the priority settings of your device to start to get my media you use (USB or optical drive). Therefore, it is possible that it was for the setting even after installation, so he's trying to boot from the recovery media instead of the operating system on the hard drive.

  The BIOS boot priority settings vary depending on the manufacturer of the computer. Therefore, for the change in the value of such assistance, we suggest that you contact the manufacturer of your computer.

• My windows will not validate after you perform a clean installation.

  After a few reformat my windows won't validate

  Ive recently had to reformat my computer a couple of times due to hardware problems.  Now my windows will not activate even if im using the same computer, I first installed windows on.   Through the activation of said phone system that my windows are now no longer valid, but it is said in the lower right corner on my windows desktop is not genuine... Please let me know what to do... im getting very stressed out trying to figure this

  How to activate Vista "manually" (activate by phone)
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) clearly explain your problem to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  J W Stuart: http://www.pagestart.com

• All-in-one HP OfficeJet J4680: Solution HP will not launch after recent updates Windows 10

  HP Solution would not launch before 10 Windows updates have been downloaded. After the updates have been downloaded on 03/01/16, HP Solution launched and worked. 05/01/16, ddoes HP Solution, not throw again. I've read of other recent and clear solutions on what must be applied to resolve this problem.

  @MsAymz

  Try to uninstall this update until Microsoft comes up with a fix.

  Security Update for Internet Explorer in the drive for the Windows Version 10 1511 (KB3132372)

  How hide/block updates to Windows in Windows

  December 28, 2015, Adobe released a security update for Adobe Flash Player fix that they call "critical vulnerabilities" that allow an attacker to take control of the system concerned.  Microsoft has published notice 2755801 of security and updating of security KB3132372 to make the Adobe Flash Player update available to all users.

  Adobe and Microsoft are aware of the reports of some application crashes after you install this update, conducting research on this problem.  We will post more information in this thread in KB3132372 under the more information section.

  indows_10-update/some-applications-may-crash-afte http://answers.Microsoft.com/en-us/Windows/Forum/w...

  REO

• Windows does not start after the update...

  Hope someone can help with this,

  I just installed the update sp1 for my computer for Windows Vista Premium Home dir all installed with no problems, but when I restarted my pc, Windows wouldn't start. The only thing that is on display is a black screen with Windows Error Recovery on top, then he said "Windows does not start. A recent hardware or software change might be the cause. I tried to restart it in different ways, but nothing. Then he said: I have to insert my OS drive to try to fix, but that's not even start. Everyone knows about this problem? This has happened right after that I installed the update...

  L.Butler,
  Are you able to boot from your Vista DVD or recovery partion and run the Startup Repair tool?  If you do not have a Vista disc so make sure that your computer is configured to boot from the CD drive before booting from the hard drive.  Once you start with support for Vista select the "Repair your computer" option and first run "Startup Repair".  If that is not correct the problem then boot with Vista support and select the option "System Restore" and choose a date prior to the update install.
  Once you are able to boot normally again, then I suggest that you are looking for virus\malware.  SP1 was released in April 2008.  So if you install earlier means there may be other problems on your system.  If you have a backup of your current personal data then I recommend to do a clean restore to install\factory.  Then immediately install antivirus software, and then do all Windows updates before installing other software. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista will not boot after installed updates

  After installation of .net Framework 3.5 Service Pack 1 for .net Framework Assistant updates. 1.0x86 (KB963707) and Windows Vista (KB968389) to my Dell XPS M1330 laptop, my computer did an automatic stop down. I couldn't restart my computer correctly after this {2nd time this has happened}. I restarted my time 1st comp by selecting the command prompt and the 2nd time by catering to last known position. I did all as usual by pressing F8, F12, F2, diagnostic test, memory test and a little more. Right now I'm running, but I'm going to be scared to do another update when the time comes. Can someone help me please on this issue. Many thanks in advance, Ron

  Hello

  1. keep good backups of your data using redundant methods.

  ------------------------------------------------------

  2. it is very possible that updates do not install correctly are the symptoms of the real problems
  and not the real cause of their.

  ------------------------------------------------------

  3 set updates download but you can install them - and you can install them one at a time if necessary.

  Control Panel - Windows Updates - left settings.

  and run it to restore updates

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  ------------------------------------------------------

  4 do these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------------

  5. record how to remove updates if necessary:

  Control Panel - Windows Updates - lower left Installed Updates - uninstall or change

  Or

  Remove an update
  http://windowshelp.Microsoft.com/Windows/en-us/help/182043da-fc3e-4220-AFBC-d9b09f2b2a1a1033.mspx

  Or

  The problems with the removal of updates
  http://windowshelp.Microsoft.com/Windows/en-us/help/5a319824-5cb5-493d-9151-9a97d0f565b61033.mspx
  Or

  How to uninstall updates in Windows Vista
  http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

  Disable or hide optional updates on Windows Vista
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/

  ------------------------------------------------------------

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows will not start since the update :( Help, please

  Windows could not start. a recent hardware or software change might be the problem

  file\windows\system32\config\system
  status: 0xc00000e9

  When I try to start the system restart that nothing happens

  When I try to restore the computer to factory settings it says that the necessary files are not there.

  My computer was working fine until I installed an automatic update from microsoft. Help, please

  For any problem with the recovery of software/process to factory settings, you will need to contact the manufacturer of your computer.
  This isn't their recovery process, Microsoft.

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• M4V will not play after the update of the Sierra

  I have a number of m4v files that will play is more in quicktime or iTunes after my update for Sierra on my MacBook Pro and iMac. The audio plays fine but the video freezes on the first few frames. I have no problem with those files previously.

  Any suggestions please?

  I have a similar problem as well. Some of my m4v files appear as a blank page with a folded corner icon. They will not play in anything other than VLC player. When I try to play them in iTunes the move, and he said LIVE. When I move the files to an older operating system (El Capitan), they play and correct appearance.

• File server for Windows does not work after security update

  I just upgraded the security update that was released last week and all of a sudden the computers windows cannot access the server. I'm under 10.11.6 and everything was great until we started windows computers today. They can ping and access the internet, but they cannot access SMB on the server.

  Macs have no connection problems in the SMB and AFP.

  Any ideas, what has changed? Users of server are all still there and it seems like it should work. I can access the web page of servers too.

  Make sure you are including the domain in the user name when signing in. for example USER: groupe_travail

  Also, check that your windows machine has the correct set of LM compatibility level. For El Cap servers must be set to 3.

  Follow the instructions below to change the Windows security settings to allow Windows SMB connections.

  1. Click on the Start button and in the bottom search bar, type regedit . Select search results regedit and the registry opens.
  2. Using the folders on the left side of the screen, navigate through the tree to the following location: \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
  3. In the right window, find the following DWORD value: LmCompatibilityLevel . If it exists, double-click it and set the value to 3 (in decimal).  If it does not exist, right-click in an empty space in the right part of the window and create a new DWORD value called LmCompatibilityLevel and set its value to 3 (in decimal).
  4. Restart the computer.
  5. Re-try to connect to the server via the workstation.

  NOTE: The versions Home of windows may not the ability to set the LM, and unfortunately I have not found a way around that.

• None of my videos will not work after the update to version 13.1

  I tried of you tube and I still get "an error occurred trying to come back later ' player will not mount on my homepage that uses silverlight. The two sectors work with Chrome and IE

  Hey delittle632, this is probably due to the recent update of the plugin to version 11.3 adobe flash. It has caused similar problems for many other users (chrome & IE get provided with a different version of the plugin by adobe).

  You can try to remove flash 11.3 of the section of the configuration/program windows downgrade to an earlier version & Control Panel, until adobe fixes these problems.

• Satellite L40 (PSL48E) - is not restart after BIOS update

  Hello

  My problem is that I have updated the BIOS and after that the machine does not restart. (Corrupt BIOS?)

  After that the BIOS updated (Satellite L40 PSL48E), reboot the machine and with the F2 key, I open the BIOS setup.
  I check the version of the BIOS (5.50) and complete the configuration of the BIOS. The machine must restart now...
  Not at all, the machine does not restart. No screen only the powerled lights.

  I can to fix it on my own as a BIOS reset?

  Thank you for the cooperation.

  It's strange because after that the updated BIOS update you can go into the BIOS.

  However, try to remove the battery and the AC adapter. Wait one hour and then put the battery back in and connect the AC adapter. Try again.

  If it doesn't work it is something wrong with the hardware or BIOS and must be checked by a technician for laptop.

• Windows does not work after last update of November

  I've manually updated Windows 7 last night (updates critical day of November and other updates) and since it has NOT restarted, automatically, I rebooted my computer this morning.  Since then, Windows begins to restart, but then the screen comes on and off (i.e. flashing) but don't not continue to open windows... What do I do? Help, please.  Thank you.

  Here you go:

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your system repair CD. If you do not have one, ask a friend to burn you through the control panel / backup and restore. It takes less than five minutes.
  3. Press a key when prompted to boot from the CD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point before the automatic update do its damage
  8. Disable the automatic updates until Microsoft solves the problem. You should see it in these forums.