OlioWeb VM consumes 99% CPU usage and get errors webload olio.

Similar Questions

• Vista goes to 50% CPU usage and connects the computer for hours after the beginning

  Original title: Vista processor

  Stupid Vista goes to 50% CPU usage and connects the computer for hours after the start.  Cannot run anything with any request of CPU without getting bogged down and crashing.  It is not windows defender, I suspend this service and the machine is ok for another 1/2 hour, them I'm up to 50% of the CPU.  The idle process said Task Manager is > 90%, still indicates 50% CPU usage and the cooling fan looks like a 747 taking off.  Should I just pull the machine and go for Linux, or what?  Cannot run games or whatever it is, totally disgusted with vista of POS and microsoft can it Deep and do not get windows 7, it is probably worse.  Is that all I can turn off to get the same performance than, say, windows 3.1?  It would be preferable to the current situation.  MSCKMA.

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Why did FireFox flash black and then cause a huge CPU usage and crash?

  I don't know if this has been asked before, but on Windows 7, FireFox will cause a high CPU usage and the black flash and then crash. No idea why? Acceleration is disabled for the options and flash.

  Would help if we could read your Crash reports.

  Please follow the steps below to provide us with crash IDs to help us learn more about your accident.

  1. Enter Subject: hangs in the Firefox address bar and press ENTER. A list of submitted Crash reports will appear, similar to the one shown below.
  2. Copy the 5 most recent report ID that begins with a bp - then go back to your forum question and paste the ID into the box of "Post a reply".

  Note: If a recent report ID does not begin with bp - click it to present the report.

  (Please do not take a screenshot of your plant, just copy and paste the ID.) The image below is just an example of what your Firefox screen should look like).

  

  More information and additional troubleshooting steps are in the article Firefox plant - troubleshoot and prevent assistance fixing crashes .

• How to check the CPU usage and paging using LabVIEW

  Hi guys,.

  I build an application that is used to check the CPU usage and paging using LabVIEW. How can I do?

  any help, suggestions or advice will be greatly appreciated...

  Kind regards

  Prashant

  Hello

  If you plan to build your app for Windows, you can use .NET classes. (System.PerformanceCounter), there is a simple example with LabVIEW:

  C:\Program NIUninstaller Instruments\LabVIEW 2010\examples\comm\dotnet\SimpleTaskMonitor.llb

  

  Also, you have several screws that you can use to verify information about the processor.

  

  Kind regards

• Using W7 X 64 Ult I try to load KB976422 update and getting error 80070005. __

  Using W7 X 64 Ult I try to load the KB976422 update and get error 80070005.
  It dowloads OK, but when the machine charging the update fails and the system comes back and restarts.
  I understand that this update is for large flash cards, (which I did not), but it is still very irritating not to have a clean sheet on the history of the update and do not forget that it ever works.

  I looked in all the likely places, but can't seem to find this combination. I missed the answer somehow?

  DAve

  Dave

  80070005 is an access denied error. This error occurred never install any other updates? The update in question, KB976422, update drivers 4. Most likely, location of the drivers is 'protected' against driver changes or their registry setting is. Suggest that you manually download the update and save: Update for Windows 7 for x 64-based systems (KB976422)

  Configure the system to boot: How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7

  Try to install KB976422 now. If you are prompted to restart.  Who are you installed?

  MowGreen Services update - consumer safety

• I installed Turbo Tax Delux 2011 tax software and get error 42002: could not connect to the update site to receive the latest updates.

  I installed Turbo Tax Delux 2011 tax software and get error 42002: could not connect to the update site to receive the latest updates. Turbo tax support site says adjust the parameters or the rules on my security software to allow certain programs to install and works as expected. How can I solve this problem to allow updates? Thank you. CraigrH

  What is your operating system and Service Pack?

  What is your anti-malware?

• I can't update KB970710 and get error 8007002.

  I can't update KB970710 and get error 8007002.  This is an important update.  I went to the Microsoft web page, and it explains how to download the update in safe mode.  In safe mode I can't have in the center of update by using the Start button and pressing the update of windows.  The funny thing about all this is that the update does not load because of my virus program which is essential to MICROSOFT security.  Please help me.  I fear that my computer may be at risk because I was not able to download from 17/06/11, since it was released.

  Hi Jan31158,

  Follow these steps:

  Method 1:

  Follow the steps in the following article troubleshooting to solve the problem:

  Windows Update Error 80070002

  Method 2:

  Download and save the Setup on your desktop package and try to install the same.

  Download the update from the link below:

  Update security for Windows Vista (KB970710)

• Try to install 4 ' important'updates on Windows Vista and get error codes: 80070641.

  Try to install 4 ' important'updates on Windows Vista and get error codes: 80070641, who has had a lot of answers posted but none does not seem to work and I tried to install this upgrade for the last 6 months! (I did one where you made sure something is running in the Control Panel, but it works just not - I HATE Vista!)

  Now just got a new error code: 6 to 8.

  The updates, I can't update (!) are:

  1. SQL Server 2005 Express Edition Service Pack 4
  2. Update of security for MSOffice 2007 System
  3. Update for MS 2007 Office system
  4. Update for MSOffice Outlook 2007 Junk email filter

  Unfortunately I'm not technically proficient at all and do not understand the jargon I've read on this site so if anyone has an answer, please could you write it as if you were talking to your grandma who only discovered what a mouse!  ;-)

  Thanks in advance

  Sharon

  original title: error codes: 6-8 and 80070641

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Can not install windows KB973917 update and getting error code 8000FFF

  I have a toshiba satellite A505 with Windows Vista 64-bit and 4 GB of RAM.  I can't install the windows KB973917 update and getting error code 8000FFF.  I have tried everything to fix it, but have had no luck.  Someone had the same problem?

  A few suggestions here: http://taurarian.mvps.org/WU_Vista/8000ffff.htm

  8000FFFF error code when you click on "Check for Updates" in the item of control panel Windows Update on a Windows Vista-based computer
  http://support.Microsoft.com/kb/946414

• Recently reinstalled Adobe Creative suite and get error 6.

  Recently reinstalled Adobe Creative suite and get error 6.

  

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Also, what are... install you program name AND exact version number?

  Are you using a computer administrator account will be full read/write permissions?

  6 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html code

• I am trying to down load 13 Photoshop and get error 413.  Help, please

  I'm trying low loan 13 Photoshop and get error 413.  Help, please

  Hello

  Please see the forum topic below.

  Error 413

  Please use the link below to download Adobe Photoshop elements 13.

  Download Photoshop Elements products | 10, 11, 12, 13

  I hope this helps.

  Kind regards

  Vivet

• try to open items and get error window 150-30 what should I do

  tryng to open items and get error screen 150-30 I can do

  See this document from Adobe:

  http://helpx.Adobe.com/Creative-Suite/KB/error-licensing-stopped-Windows.html

  Ken

• Recently FireFox often caused 100% CPU usage and locks until it finishes the process (the different). Clear the cookies/cache did not help. Any ideas?

  Windows 2000 SP4, 1 g RAM, Firefox version 9.0.1
  We keep IE6 and Firefox open simultaneously to 2 different email accounts. Firefox has always been much faster even with 3 or 4 tabs open, but for the past few weeks trying to update a screen suddenly CPU goes to 100% usage and of course nothing will move until the process is complete. Close one or more tabs does not help. If I close Firefox completely using the task processor Manager goes back down to zero. After restarting Firefox CPU use may or may not go back to the top as he tries to continue the previous task which has been lock him up.
  He did this with Firefox 3.6, but still it did not happen immediately after the 9.0.1 update either.

  Hi vbolton,

  Have you looked at the Knowledge Base article Firefox using too much memory (RAM) - how to fix the or Firefox using too many resources CPU - how to fix? There is a lot of information in there.

  Hope this helps!

• My laptop is often spiking to 100% CPU usage and always > 10%, with a physical memory to 25% + even though I have no programs running

  Recently, I reformatted the drive, reinstalled Windows and have no personal data on this subject. The only application there is office, which I am not, using McAffee and my browser:-I use it mainly for web browsing.

  It seems to happen mostly when I was using the browser, then left the machine for a few hours, then come back and tried to use it again. I turned off the screen saver and specify power options to keep permannently because she seems to be that the question was restartinjg rest. When the CPU usage is at its peak, and I try to return to the browser (or whatever it is) it may take some minutes to answer - just to load the Control Panel, for example.

  I can see from the Manager tasks, which is currently running, but ideas on how to identify the process that all take this resource, I can stop safely and therefore to save resources?

  Processes are:-

  CSRSS
  DWM
  Explorer
  mcagent
  MSASCui
  rundl32
  Sidebar
  taskeng
  Taskmgr
  Winlogon

  Also a lot of services - too many to list!

  All the processes you list, apart from mcagent, which is McAfee, are essential components of Windows. If you finish one of them outside the sidebar of your computer stops working to a greater or lesser degree. You could try gadgets on sidebar of closing in case one of them is wrong to behave.

  Another thing that can cause the CPU to boost with no application running is Windows Update and probably analysis and updates from McAfee.

  Don't you have the CPU column shows in the Task Manager, so that you can see which process is using most of the CPU? What processor is it? What is a heart?

  A better tool than the Manager of the tasks for these circumstances is Process Explorer.

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  Process Explorer is a chart of the CPU where you can put the mouse on a cob and it will tell you what process is using most of the CPU.

  There is an introduction to Process Explorer here.

  http://Channel9.msdn.com/events/TechEd/NorthAmerica/2010/WCL314

  As for the memory of 25%, 25% of what? Computer laptop 2 GB I write this on shows 42% of physical memory used with any running application. It's Windows. It's big enough.

  In your situation, one thing I would try would be to uninstall McAfee (run the removal tool then http://service.mcafee.com/FAQDocument.aspx?id=TS100507) and install Microsoft Security Essentials.

• The processor high/weird CPU usage and about 20 to 25% system interruptions.

  Hello

  I use an AMD phemon IIx4 965 processor. (never had proplems with this till now.) One of its mainstays bed use ranging from 70-99% in Task Manager exercising while the other 3 are normally working / reading normal numbers. The question comes at random, but won't go away unless I restart my computer. This problem arises in a week a go, I was playing a game in steam when I noticed the drastic performance to fall and began studying. The question, something just when im not playing. I use my computer mainly on the game. The computer slows down because of this. I have no idea what the cause. Help?

  Procexp said interruptions system 20-25. According to CPU - Z and CrystaldistInfo my HARD drive temperatures are all normal, around 28 - 38 c idle.

  Reasently, I got a new case for my computer parts, I removed and passed my components of my old case to a new. I tried to be careful and I know (I know) thinki. enough computers to do this by myself. Fifi, it done once in the past. I have read the instructions and put / connected all the wires and parts according to them. The machine started normally. No problems. This could cause this problem, is a thread in the wrong place? I do not know.

  I used free versions of Windows security essentials and Spybot search and destroy, Avast kernel tdsskiller to search for viruses and malware. All this happened in own. Can he still be a virus or something?
  Used more claire Wise registry and Ccleaner but noting alarming is come to the top, (again I think.) some things Yes, but breaking the ' fix claim has pursuant button has not set a cpu problem.

  First I though its my GPU causing the problem drivers. (google said) Approximately 45 days only a go replace my old AMD for a new R280 AMD Radeon 6950. Allworked very well so far. I found that according to Unknown Device Identifier I had older drivers still on my machine. I had trouble removing the old drivers, but eventually I had to use an uninstall program display driver for getting rid of them and now I only see one set of drivers. This has not fixed the issue of the use of the cpu.

  IM lost, at the end of my skills (mainly google-fu). Can someone help me? I hope this is the right place for this post, if it isn't then I apologize.

  If you want me (hopefully) post set and whatknot please first tell what program for and where to find it.

  Card mother 790GX-G65 (MS-7576)
  CPU AMD phenom II X 4 965
  AMD Radeon R280X 3 GB DDR5 XFX video card
  BenQ E2420HD 24 "1920 x 1080 resolution 75 Hz LCD monitor
  8 GB RAM DDR3
  Series of smart Power Supply Thermaltake M85OW EU

  I've updated all the drivers on the site of manufacturers on my motherboard side touching the BIOS and embedded PIDE/SATA drivers. Updated my drivers for Audio embedded, embedded LAN Drivers, System & Chipset drivers. (smarter people said that could set).

  Until writing this no problem has arisen, all works fine now. Procexp said system interruptions are now less then 2, compared to the previous 20-25 it is a sign that the update to fix the problem. It seems that this problem corrected everything. It turns out that all i needed was updated drivers thees. Everything works fine now... for the moment at least. Live and learn.

  Thanks for the time and effort you took to look for it.