OLIVIER 11 g and OBI 10 g pointing to the same database

Similar Questions

• Is it OK for the test server, and the server signs Local point to the same location?

  There seems to be three places where the files of my site: local files, server assessment and remote server.  I am happy with the remote server.  What I'm confused about are the other two.

  I understand that to build a site using mysql databases that I need to set up a test server.  Here is my configuration: Windows 10, CBWMS 2015.1 using XAMPP with the folder root of my site in htdocs.  I tested FormMail, hence the name of the site is formmail

  

  So, I open one of my files from the local files (right) Panel, modify it and it save (in the local files Panel).  I then use a preview in the browser to see my changes.  It seems that I didn't need to use was ABLE to move the file to the test server, because the file/s are already here, because as shown in the screenshot, the display of local files as the testing server view are in the same place.  What is the point of the testing server Panel?

  I know that I can put the Panel on the left with the remote server. This will allow me to sync with my ISP host.  If I put the left - and probably testing server Panel a sync is useless because the files are in the same place as the Local file?

  Maybe my setup is incorrect.  I guess my question is, is it OK for the test server, and the server signs Local point to the same location?

  Thank you gentlemen (and Lady!) I'll go forward with newfound confidence, Bravo.

• Is it possible to run Windows 7 * 32-bit and Windows 7 * 64-bit on the same computer?

  I have Windows 7 * 32 bit running in my computer. But a lot of games that is built on 64-bit do not work in my system. I tried to install Windows 7 * 64 Bit on another partition of my computer. But before the start of the system using the Windows 7 installation DVD, I get an error with the oxc00000e9 status. The info says: unexpected i/o error has occurred.

  My question is whether it can run Windows 7 * 32-bit and Windows 7 * 64-bit on the same computer. If so, how to install the Windows 7 * 64-Bit? Thank you.

  Yes, you can, but you will need to have a permit for it if you plan to have both on the same computer.

  the key that can be used with 32-bit or 64-bit Windows 7 is designed to drive 1. You cannot use install both. 1 license, 1 installation, so choose wisely. If you want to install Windows 7 32 or 64 bit on another partition or another computer, you must purchase an additional license.

  INSTALLATION AND USE RIGHTS.

  a. one copy per computer. You can install one copy of the software on a single computer. This computer is "licensed computer.

  b. a computer license. You can use the software on up to two processors of the computer under license at some point. Except as provided in these license terms, you cannot use the software on any other computer.

  c. number of users. Except as provided in these license terms, only one user may use the software at a time.

  d. other Versions. The software may include several versions, such as 32-bit and 64-bit. You may install and use only one version at a time.

  Resources:

  Please see the following article with useful information about dual-boot:

  http://Windows.Microsoft.com/en-us/Windows7/can-I-have-more-than-one-operating-system-on-my-computer-multiboot

• Errors with several buttons pointing to the same frame on the timeline. Animate CC

  I have a project where I'm using a function text button to reach a specific image and stop to view, however, if I take a contour of the object and put it on a symbol, I can't have two different objects pointing to the same frame, it generates the error because the frame can be called only by a single button/symbol.

  My solution is to reproduce each of the frames and each have addressed as a new image with the same content.

  Is there a better way to do this?  I'm not fluent Actionscript 3.

  Thank you

  Rick

  You can't have double function names and using the same name/instance for different objects reference is problematic, but you pouvez have different objects "..." pointing at the same time.

  Btn1.addEventListener (MouseEvent.Click, F1);

  btn2.addEventListener (MouseEvent.Click, F1);

  btn3.addEventListener (MouseEvent.Click, F2);

  Function f1(e:MouseEvent):void {}

  this.gotoAndStop (32);

  }

  function f2(e:MouseEvent):void {}

  this.gotoAndStop (32);

  }

• Snapshots broken - two snapshots pointing to the same basic disk, may consolidate

  Hi people,

  I'm running into a brick wall with a problem I'm having with snapshots. Sometime a few nights ago a configuration change was made to one of our virtual machines even if a snapshot exists for this virtual machine. Later, shots were not working properly.

  The initial snapshot, which was there when changing the configuration seems to have consolidated in the basic disk. However, the snapshot files are always here (1 mb in size) and are still there in the Snapshot Manager.

  Create snapshots in addition to this, one works very well, but they cannot be consolidated:

  An error occurred in consolidating the discs: msg.snapshot.error - DUPLICATEDISK.

  Examining the files .vmsn watch the first snapshot and the second snapshot point to the same basic, disk rather than the second snapshot pointing to the first snapshot.

  I've attached a zip file of all the files that appear to be relevant.

  My thought is this: since we know that the first snapshot contains no valuable data (the deltas are empty; they were not pushing between the time when the first consolidation 'fail' and the second snapshot was created) can change us the .vmsd of the virtual machine and delete the references to the snapshot of the first, broken? This would allow consolidation to ignore that first unnecessary snapshot that points to the same disks as the second and ends correctly?

  Thank you!

  If a vmsd is no longer valid and snapshotmanager does not display anything, or something that has no sense
  create a directory "deletemelater" inside the existing - move all the vmsd and vmsn-files into it.
  Then look at the config really used by
  1. Mark vmdk in your current config in reading the vmx file (scsi0:0.filename =?.) VMDK
  2. check?. VMDK and follow the referenced parentFileNameHint it
  3 do the same for each additional parts possibly existing chain of snapshot
  ....
  X. Finally, you should find the reference to the basedisk

  If all the paths make sense and are available and you want to keep the virtual machine, as it is configured
  create a new snapshot while the virtual machine is turned off.
  This should create a fresh and valid minimum vmsd file that also will allow future automatic backups after then used the function UI 'clear all '.
  Vmsd-files for editing is rarely needed - and the above procedure is much less error-prone.

• Transaction and transaction AppModule Taskflow both are the same or not?

  Transaction and transaction AppModule Taskflow both are the same or not? or what are the differences between these two operations.

  Workflow transaction is different from the transaction data base (I mean the transaction returned by am.getDBTransaction ()). Each workflow is associated with a data control framework. A data control framework is the container that is associated with a workflow that contains several instances of data control. The ADF Model layer exposes the DataControlFrame interface to manage a transaction involving data controls in the framework. DataControlFrame interface exposes methods such as:

  • beginTransaction()
  • Commit()
  • Rollback()
  • createSavepoint () - Note that it is the backup point maintained by the controller of Oracle ADF and it is similar to the point of backup of database
  • isTransactionDirty()

  Task Transaction flow

  There are four transaction options that a stubborn workflow can use (notice that unbounded flow task does not support transactions):

  1. No Transaction controller: delimited task called flow does not participate in the management of transactions any controller ADF.
  2. Always Begin new Transaction: A new transaction begins when the stubborn workflow is entered, regardless of whether a transaction is in progress. The new transaction ends when the stubborn workflow stops.
  3. Always Use Existing Transaction: When it is called, the stubborn workflow participate in an existing transaction already underway.
  4. Use the existing if Possible Transaction: when it is called, the stubborn workflow is involved either in an existing transaction if there is, or starts a new transaction when the entrance to the stubborn workflow, if one does not exist.

• How can I animate various mouse Tracker points at the same time during a recording?

  Hey,.

  I'm trying to animate my character so that his left arm cross out his right elbow, and then the fear character and she jumps on the side. I can't animate the arms at the same time in a single record. How can I animate various mouse Tracker points at the same time?

  Playing right now I seem to be only able to animate a point Tracker of mouse at the same time (i.e. his right arm) and when I return to 're-save' so I can animated left arm, right arm recording is saved on and now only point left mouse Tracker.

  Hope that makes sense, let me know if you need me to develop. Thank you.

  Currently, you'll want to separate Tracker mouse behaviors for each hand. Select the puppet in the project Panel, and then add the second behavior mouse Tracker via the add behavior button ("+") in the properties panel. Then, during recording, make sure to disarm one of them so that other behaviors can control the hand that you drag. We are studying ways to improve this workflow for future versions overview.

• How to play stereo mix music and sing in my microphone at the same time?

  Hi guys, need help with Realtek HD audio driver

  I want to play stereo mix music and sing in my microphone at the same time... not for registration but in chat room, say.

  I'm using XP... Toshiba Satellite S4747 laptop
  In the Realtek software "Realtek HD audio input" microphone and two stereo mix... but I can only select one at a time...

  All solutions please thxxxx

  On a different note... a friend of mine using a non-Toshiba laptop with win XP has an older version of the Realtek audio driver and select the mic and stereo mix at the same time... I downloaded this version in my laptop, but still, I can choose only one at a time...

  Check that the audio settings of Windows and don t forget in the Realtek HD audio Manager. You can find it in the control panel.

  I think that your microphone is on Mute check so this.

• How to take a column of duplicate names and fill a different column with the same names, excluding duplicates?

  How to take a column of duplicate names and fill a different column with the same names, excluding duplicates?

  I find easier to use this copy separate Automator Service (download Dropbox).

  To install in your numbers > Services, double-click menu just the package downloaded .workflow and if necessary give permissions in system preferences > security & privacy.

  To use, just:

  1. Select the cells in the column with duplicate names.
  2. Choose separate copy in numbers > Services menu.
  3. Click once in the upper cell where you want the deduplicated values appear.
  4. Command-v to paste.

  SG

• j105el envy: envy of hp can not right and made a left click at the same time

  my hp touchpad cant hp envy envy cannot not right and made a left click at the same time. I don't know if it's a driver. because of this I can not play games like GTA cause I need do a right click to aim and left click to shoot. is there a solution to this

  @gwatanaj ,

  Hello and thanks for the display on the HP support forums.  Here is a link that may be useful.

  HP laptops - use and troubleshooting of the TouchPad and ClickPad (Windows 8)

  What you are trying to do may not work with your touchpad.  Normally when it is best to use a mouse.  The hardware is built to be different and you might find it easier to work with.

  If you need help please post back.  First of all, check out this link.

  Tips for the "very best question.

  So, please indicate your model full and product number.

  I hope hear from you soon.

  Thanks again and have a great day.

• a pc that is sharing the printer and another pc does not accept the same network printer on xp pro sp3

  a pc that is sharing the printer and another pc does not accept the same network printer on xp pro sp3
  What is the solution?

  Check out these links

  http://TechNet.Microsoft.com/en-us/library/bb457001.aspx

  http://UIs.Georgetown.edu/software/documentation/WinXP/WinXP.network.printer.html

• I am trying to install a printer wifi (Kodak ESP 7250) and they are both connected to the same wifi but when I try to add the printer, my PC can't find it.

  I am trying to install a printer wifi (Kodak ESP 7250) and they are both connected to the same wifi but when I try to add the printer, my PC can't find it. I made sure they are both connected to my home network and when I go to control panel / printer and try to add a network printer / wireless. He won't find it. Any ideas?

  Hello

  I suggest you to visit these links and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  It will be useful.

• Can I have Windows 7 Professional and Windows 10 operating systems on the same lap top

  Can I have Windows 7 Professional and Windows 10 operating systems on the same lap top

  Yes, you can, but not with the free upgrade, you will need to purchase a full license for Windows 10 to do this.

  Step 1: purchase a license:

  Buy Windows 10 family/professional edition

  Step 2: Download Windows 10 and create a bootable copy

  How to download official Windows 10 ISO files

  Step 3: Create the partition then install dual-boot configuration:

  How to: install a Setup to dual-boot with Windows 10 and earlier versions of Windows

• I have windows server 2008 R2 and windows 7 32 bit on the same network. But I couldn't see the server on the network.

  I have a windows server 2008 r2 server and windows 7 32 bit on the same network.

  I couldn't see the server on the network and

  also I could not access the workstation to the server.

  not more than one device must perform NAT

  Hi Bruce,.

  Given that you are working on Windows server 2008 R2, please post your question here:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• In Windows 7 Action Center, MSE, and Windows Defender convertible 'ON' at the same time?

  In the center of Action of Windows 7, Microsoft Security Essentials (MSE) is enabled.  I tried to turn on Windows Defender 'manually' and get a status of "OFF"OBSOLETE"? that quickly toggles back and forth

  I'm trying to maximize my options "malicious."  I have NOT tried turning 'OFF' MSE to see if Windows Defender will be 'ON '.

  My real question is, can MSE and Windows Defender, being 'ON' at the same time or are mutually?

  A "full scan" using MSE detected the following malicious program "trojan:Win32 / Tracur.AV". I immediately deleted it. I think it's GONE!

  My "quick" weekly scans did not detect this malware. What a scare on my new laptop TOSHIBA P750.

  Now I take the time 'always' do a full scan.

  Help

  Hello

  Welcome to the Microsoft community.

  If you use Microsoft Security Essentials, there is no need to use Windows Defender. You can disable that and just let Microsoft Security Essentials run things.

  You should only use an antivirus program. using several programs at the same time will cause problems.

  Please refer to this link:

  http://answers.Microsoft.com/en-us/protect/Forum/MSE-protect_start/Windows-Defender-and-Microsoft-Security-Essentials/5309cb8d-02e1-40E8-974f-0dcedb9ab9fd

  It will be useful.

  Let us know if you have any questions about Windows and we will be happy to help you.