OLIVIER Installation on Oracle - Linux 64-bit

Similar Questions

• Installation of Oracle Client 32-bit on Windows 64-bit

  Hello

  I am trying to install the Oracle 32-bit (version 11.2.0) client on a Windows 64-bit server (Microsoft Windows Server 2008 R2 Standard, Service Pack 1).

  It is my understanding that this is supported and should work. However, the Oracle 64-bit (version 11.2.0) client is already installed on the server.

  We need the 32-bit client from an older application requires it.

  The GUI for the installation of the client starts very well - but when step "Finish Installation" MISTLETOE evacuated all of a sudden. The installation log file ends

  with

  INFO: Setting the value for the variable INSTALL_TYPE

  INFO: Variable "INSTALL_TYPE" wird auf "InstantClient' aufgefuhrt. Der Wert wurde von der Befehlszeile restaurants.

  INFO: addition of the variable oracle_install_NoMigration to table command line args

  INFO: addition of the variable oracle_install_RACInstall to table command line args

  INFO: addition of the variable oracle_install_WindowsSystemDirectory to table command line args

  INFO: update of the State of STATE_INIT_SESSION computer

  INFO: Create and initialize the Interface of Session handler

  INFO: PrepareForInstallOperations to call OiicInstallAPISession

  NEWS: Execution of the iterator until the summary

  INFO: Initialisieren of the Installationsbestands

  INFO: Einrichten of the Installationsbestands

  I am running as a local administrator installation - I tried installing with setting the compatibility mode to Windows 2000. No success at all the :-(

  Am I wrong that the 32-bit client ths is certified with this version of windows? Does anyone have experience with the same situation?

  Any help will be appreciated!

  Rgds

  Jan

  
  

  Do you use separate ORACLE_BASE directories?

  Oracle & reg; Database

  HTH
  Srini

• installation on oracle Linux

  I m trying to install oracle 10r2 on linux but cannot run the runInstaller from the cd but I can't run it don't no why...:)

  OK... copy complete directory on one of your records... and then right click on run installer... change IE properties click execute permission... n, and then try to install from the directory where you installed

• DB 12 c on the Oracle Linux 7.1 installation problem

  Hello

  I have installation problems of database 12 c on Oracle Linux 7.1, this is what I did and what is the result:

  Steps done in order:

  1. Configure a machine virtual box OL7.1 (has enough swap space, is fully updated and invited additions running)
  2. Install the package "oracle-RDBMS-server-12cR1-preinstall" to make sure that I have all the packages required pre
  3. Followed the additional configuration steps in this tutorial oracle-www.m-base.org/Sounds.html (permissive-selinux, exports .bash_profile, create the installation path, create users and groups required)-> https://oracle-base.com/articles/12c/oracle-db-12cr1-installation-on-oracle-linux-7#additional_setup
  4. Obtained by runInstaller installation and chose to install database software ONLY.
  5. Run the root.sh as root script, after that the installation was successful
  6. DBCA: Create database, mode, advanced, general use create as CBD (an APB called pdb1), EM express (Yes), rather than default storage settings, install the schema example, character set AL32UTF8, by default all the rest.
  7. Edit the/etc/oratab file by changing the N a y at the end of the last line that is now "data1:/u01/app/oracle/product/12.1.0.2/db_1:Y".
  8. sqlplus sys/oracle as a sysdba

  I'm stuck at 8, it's the following message is displayed:

  ERROR:

  ORA-01034: ORACLE not available

  ORA-27101: shared memory realm does not exist

  Linux-x86_64 error: 2: no such file or directory

  Additional information: 3640

  Additional information: 1543399787

  Process ID: 0

  Session IDs: serial number 0: 0

  I studied him that changing the/etc/file hosts to remove all the duplicate names could fix this error, then here is this that my/etc/hosts looks like:

  cat/etc/hosts

  127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4

  : 1 localhost localhost.localdomain localhost6 localhost6.localdomain6

  Before I change anything, I would like to help, can someone go get where I left and gives me a step to ensure that this facility is set up correctly?

  I missed something?

  Comments are welcome!

  Your 7 step refers to an instance called data1, but you set your ORSCLE_SID to the cdb1. THERY can't be correct.

• Oracle Database 11g R2 under Oracle Linux

  Hi, I am very new to the oracle dba. I tried to install oracle database 11g r2 on Oracle Linux 64-bit. What version of oracle linux best costumes?
  Thanks for your reply.

  857367 wrote:
  Hi, I am very new to the oracle dba. I tried to install oracle database 11g r2 on Oracle Linux 64-bit. What version of oracle linux best costumes?
  Thanks for your reply.

  http://www.Oracle.com/us/technologies/Linux/index.html

• error during installation of Oracle Grid Infrastructure Oracle Linux 6.2 64-bit

  I am new to the Installation of Oracle RAC. I try to install Oracle RAC on vmware 11R2.  I checked all prerequisites so far and I'm sure I went through all the components mentioned in the documents of the Oracle. It doesn't matter what I do, here is the error. Do not know how to solve. Please help me.

  ID@racnode2 Desktop] $ cd/u02/linux_11gR2_grid/grid /.

  [grid@racnode2 grid] $. / runInstaller

  From Oracle Universal Installer...

  Check the Temp space: must be greater than 80 MB.   Real 29000 MB

  Past

  Check the swap space: must be greater than 150 MB.   Real 2999 MB

  Past

  Monitor: must be configured to display at least 256 colors.    16777216 real past

  Preparations for the launch of Oracle Universal Installer from/tmp/OraInstall2013-09-22_04-04-10 AM. Please wait...

  [grid@racnode2 grid] $ Exception in thread "main" java.lang.UnsatisfiedLinkError:

  /tmp/OraInstall2013-09-22_04-04-10AM/JDK/JRE/lib/i386/xawt/libmawt.so: libXext.so.6: cannot open shared object file: no such file or directory

  in java.lang.ClassLoader$ NativeLibrary.load (Native Method)

  at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751)

  at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1647)

  at java.lang.Runtime.load0

  .............................

  ...............................

  ..............................

  Hi Harold,.

  You have the OS installation CD, if so go to the packages directory and you will find the RPM that I mentioned.

  If you do not have the CD of the OS, then get the number of link:

  http://public-yum.Oracle.com/repo/OracleLinux/OL6/2/base/x86_64/

  Thank you &

  Best regards

• The Oracle Linux 5.10 ADR 11.1.1.6.0 installation problem

  People,

  Hello. I have implemented PeopleSoft Campus Solution 9.0 revision 5 for a University.

  I need to create the web page application online for future student to apply for admission.

  My installations of PeopleSoft are below:

  Server machine: Oracle Linux 5.10 (64-bit)

  Client computer: Windows XP Professional (64 edition) with the Internet Explorer browser

  Architecture Internet Oracle Linux 5.10 Server:

  (1) database server: Oracle Database 11 g

  (2) the server application: Tuxedo 11 g

  3) web server: logic of Web 10.3.6.0

  (4) browser: Firefox Mozila

  (5) two Instances of huge database on the database server: 8.53 PeopleTools and PeopleSoft Campus Solution 9.0 R5

  I just finished installing Oracle ADR (Application Development Runtime) 11.1.1.6.0 with Weblogic 10.3.6.0 in Oracle Linux 5.10 Server machine. In step 3 of 8 required checks, impossible to pass the 2 items below:

  (1) verification of recommended operating system Packages (no pass)

  (2) verification of the parameters of the kernel (no pass)

  Oracle Linux 5 is certified with ADR and prerequisite verification certificate of operating system is spent, so, I keep the installation to the end successfully.

  My question is:

  2 items not moved will not affect the development of applications or performance later? If so, how to fix?

  Thanks in advance.

  (1) the parameters are necessary, but the system is running with a lower number. Right in the middle of the execution of your application, enter you the maximum and your system stops. It is best to set the values for the given numbers. When you run the Setup program and go to the test page and the test fails, you should be able to click the test below and the installation should continue. If the continue button is not active, you must correct the error.

  (2) I don't have an oel5 system. Missed, you have not all if necessary values in your limits.conf file? The syntax for the Scriptures is essential. Look at the other lives in the files. How do they look like?

  I guess you need to add a space after the * who would set the setting for all users, or set you it only for user oracle, which is the one you normally install the software with. Check out the tutorial I posted the link with my last post. You may need to add the line /etc/pam.d/login and etc/pam.d/sshd.

  Timo

• How to install the web 32-bit server on Oracle Linux 7 (64 bit) for Siebel SWE?

  Hello community,

  I'm being a sandbox Siebel installation in a Virtualbox machine using Oracle Linux 7, Oracle DB 12 c and Siebel 15.5.

  I did very well for all installation process since it became a large number of Frank from previous versions.

  However, I still have a remaining item left which I have not been able to solve: Web server

  Originally, I installed 64 bit version of HTTP Server Oracle 11g of Web tier that filled well.

  However, after you apply the profile SWE logic, web server would fail start given that 32 libraries cannot be interpreted in 64-bit.

  Therefore, I tried to download 32 bit Web layer HTTP server only to find out that I could not even install using the linux32 command.

  Finally, I tried to build my own Apache server that required me to also build apr and apr-util libs.

  It was beautiful.

  [siebel@sbl-lab bin] $. / apachectl v

  Server version: Apache/2.4.17 (Unix)

  Built-in Server: 11 November 2015 00:41:35

  For the Server Module magic number: 20120211:51

  Server loaded: APR APR-UTIL 1.5.4 1.5.2

  Compiled using: APR APR-UTIL 1.5.4 1.5.2

  Architecture: 32-bit

  Server MPM: event

  thread: Yes (fixed thread count)

  forked: Yes (variable process count)

  Server compiled with...

  D APR_HAS_SENDFILE

  D APR_HAS_MMAP

  D - APR_HAVE_IPV6 (mapped IPv4 addresses enabled)

  D APR_USE_SYSVSEM_SERIALIZE

  D APR_USE_PTHREAD_SERIALIZE

  D SINGLE_LISTEN_UNSERIALIZED_ACCEPT

  D APR_HAS_OTHER_CHILD

  D AP_HAVE_RELIABLE_PIPED_LOGS

  D DYNAMIC_MODULE_LIMIT = 256

  D HTTPD_ROOT = "/ opt/siebel/apache".

  D SUEXEC_BIN = "/ opt/siebel/apache/bin/suexec".

  DEFAULT_PIDLOG = ' log/httpd.pid' d

  D DEFAULT_SCOREBOARD = "logs/apache_runtime_status".

  D DEFAULT_ERRORLOG = "logs/error_log".

  D AP_TYPES_CONFIG_FILE = "conf/mime.types"

  D - SERVER_CONFIG_FILE = conf/httpd.conf"

  However, once I started the web server after you apply the SWE, I received the following message:

  [siebel@sbl-lab bin] $. / startapa

  httpd: syntax on line 503 of /opt/siebel/apache/conf/httpd.conf error: structure of the API module 'swe_module' in the file /opt/siebel/apache/modules/libmod_swe.so is garbled - signature expected 41503234 but 41503232 - perhaps it is not an Apache DSO module, or has been compiled for a different version of Apache?

  I've been contemplating installing a chroot, a container or even another virtual machine exclusively for the web server.

  Before proceeding with additional measures that I might regret, could you please how you would proceed in this case?

  Thanks in advance

  Kind regards

  Alejandro Soto Laguas

  Nevermind, I checked certifications and Apache 2.2 should be used instead of Apache 2.4

  Everything is ok now.

• EBS 12.1.1 Oracle install on Oracle Linux 6.6 x 86-64 bit

  I downloaded Oracle EBS 12.1.1 for Linux x 86 64-bit delivery; Oracle Linux version 6.6 as OS guest is Windows 7 as host; md5sum to verify the integrity of files downloaded from the EBS as by Doc ID 802195.1.  StartCD, error message for each file is: FAILED open or read.  I converted the file using the command dos2unix, tried for both versions: 12.1.1.9 and 12.1.1.13 but the problem persists.

  For other directories, got the result of following checksum:

  oraDB/Disk1/dbts/stage/db42_ctx.zip: FAILURE

  oraDB/Disk1/dbts/stage/db43_ctx.zip: FAILURE

  oraDB/Disk2/dbts/stage/db41_ctx.zip: FAILURE

  File Linux64_part_overview.txt shows that these files belong to V15679 - 01_1of3.zip, but in the circles of the delivery, this file does not exist.  files of oraDB in EBS 12.1.1 for Linux x 86-64 in V35224-01_1of3, V35224-01_2of3 and V35224-01_3of3.  This means checksum files are not updated?  I have re downloaded these files but the problem persists.

  I tried to download and check the media several times but the result was even listed above.  Then I started the installation, pre-installation check shows 'File System' failed with the error message: there is no such thing as oraInventory.  I continued, there was no error during installation but after installation controls reveal "JSP" and "Page"Login"failed with the following error message:

  JSP

  Check URL = http://localhost.localdomain:8000/OA_HTML/jtfTestCookie.jsp

  JSP is not an answer, wait 15 seconds and try again.

  JSP is not an answer, wait 15 seconds and try again.

  JSP is not an answer, wait 15 seconds and try again.

  JSP is not an answer, wait 15 seconds and try again.

  JSP is not an answer, wait 15 seconds and try again.

  JSP is not an answer, wait 15 seconds and try again.

  JSP is not an answer, wait 15 seconds and try again.

  JSP is not an answer, wait 15 seconds and try again.

  JSP does not

  and

  Login page

  Check URL = http://localhost.localdomain:8000/OA_HTML/AppsLogin

  RW-50016: error:-{0} not created:

  File = {1}

  Any suggestion to solve these problems?

  # Do not remove the next line, or various programs

  # requiring a network functionality will fail.

  # 127.0.0.1 localhost.localdomain localhost - only comments not this line

  It says very clearly do not remove these lines, and yet you have commented

  you might have used just any presented another host name "localhost".

  for example

  [ip_address]      [NodeName]. [domain_name]        [NodeName]

  192.168.1.65 vision.mylearn.com vision

  Please follow this note and see if that solves your problem

  R12 Rapidwiz fails on the message installation tasks: RW-50016, Timed Out (100000) (Doc ID 437152.1)

  Doen't work, take a look on

  Correct the method of changing the IP address in 11i & R12(Doc ID 751328.1)

  How to change the host name to E-Business Suite Release 12 on single node(Doc ID 1277556.1)

  If you ever feel to reinstall

  How to remove Oracle applications and clean up the environment of the BONE

• Cannot install Oracle Linux 6 EMP 11.1.2.3.0 64-bit

  I tried to install 11.1.2.3.0 on Oracle Linux 6 64-bit PMC. I downloaded and unpacked rest of files in a directory and started installing. But during the installation I can't select the major components because most of them were grey. How could it happen? I don't know what don't get me.

  Is the command that I used to decompress the files

  unzip file_name.zip

  The system version EMP 11.1.2.3.0 for Linux x 86-64 part 1 V45342-01

  The system version EMP 11.1.2.3.0 for Linux 64 - x 86 part 2 V37974-01

  EPM System Release 11.1.2.3.0 part 3 V37933-01

  The system version EMP 11.1.2.3.0 for Linux 64 - x 86 part 4 V37975-01

  The system version EMP 11.1.2.3.0 for Linux 64 - x 86 part 5 V45343-01

  The system version EMP 11.1.2.3.0 for Linux 64 - x 86 part 6 V37977-01

  The system version EMP 11.1.2.3.0 for Linux 64 - x 86 part 7 V37978-01

  The system version EMP 11.1.2.3.0 for Linux x 86-64 Oracle HTTP Server V37979-01

  It is appreciated if anyone can help.

  Not always and that these elements should be included in the files listed by the OP, in many cases, it may be requiring the linux packages are not installed, for example.

  

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Installation of Oracle RAC with Oracle Linux 5.8(64bit) and 11 GR 2 on EXSI 5.5

  Well, I'm trying to install oralce RAC on oracle Linux 5.8(64bit) with 11 GR 2.

  After installation oracle Linux package required by it I m is problem for oracleasmlib - 2.0.4 - 1.el6.x86_64.rpm.

  I triyed with rpm - Uvh oracleasmlib - 2.0.4 - 1.el6.x86_64.rpm and the result is rpmlib (FileDigests) and (PayloadisXz) rpmlib need for oracleasmlib - 2.0.4 - 1.el6.x86_64.rpm

  I triyed with yum localinstall oracleasmlib - 2.0.4 - 1.el6.x86_64.rpm and get an error of public key for 2.0.4 - oracleasmlib - 1.el6.x86_64.rpm is not installed...

  I tried on 3 machines and same result.

  With 32-bit I m not getting any problem

  Found the solution

  the inadequacy of the kernel version and oracle asm

• Oracle 10.2 on Oracle Linux 6.3 installation errors

  I encounter this error of runInstaller:
  
  Preparations for the launch of Oracle Universal Installer from/tmp/OraInstall2012-11-13_05-47-27 PM. Please wait... [data oracle@ora01] $ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2012-11-13_05-47-27PM/jre/1.4.2/lib/i386/libawt.so: libXt.so.6: cannot open shared object file: no such file or directory
  in java.lang.ClassLoader$ NativeLibrary.load (Native Method)
  at java.lang.ClassLoader.loadLibrary0 (unknown Source)
  at java.lang.ClassLoader.loadLibrary (unknown Source)
  at java.lang.Runtime.loadLibrary0 (unknown Source)
  the impossible (unknown Source)
  at sun.security.action.LoadLibraryAction.run (unknown Source)
  at java.security.AccessController.doPrivileged (Native Method)
  at sun.awt.NativeLibLoader.loadLibraries (unknown Source)
  to sun.awt.DebugHelper. < clinit >(Unknown Source)
  in java.awt.Component. < clinit >(Unknown Source)
  
  I'm using Oracle Linux 6.3.
  I spent hours looking for missing libraries and installed all those who are prerequisites.
  
  Did anyone seen these errors before installing Oracle on Oracle Linux 6.3 10.2 64-bit?
  
  Oracle 11.2 has installed without problem.
  
  Published by: SamM2 on November 12, 2012 23:07

  SamM2 wrote:
  Did anyone seen these errors before installing Oracle on Oracle Linux 6.3 10.2 64-bit?

  You can not install on 6.3 10.2. You can not install anything older than the GR 11, 2 (11.2.0.3) on Oracle Linux 6 Oracle database. Nothing else is certified. Setup for 10.2 is simply not designed to run on Oracle Linux 6 in all.

• New installation woes - SQLDeveloper on Oracle 11 g XE and Oracle Linux x 64

  Note that as a developer Oracle experienced in enterprise environments running the MS Windows operating system, I am familiar with SQLDeveloper for Windows. However, I have not much experience with Linux. I find not intimidating, just, I don't have a lot of accumulated knowledge.
  
  Recently, I tried to set up a development environment on my portable Windows7 Professional x 64.
  
  1 installed Oracle VBox
  2. install Oracle Linux 5.2 inside the VBox (because Oracle 11 g XE is not certified on 64-bit Windows, to go with a Linux OS)
  3 installed Oracle DB 11.2 XE
  4 Installing JDK as described in SQLDeveloper for Linux x 64 release notes
  5 installed SQLDeveloper 3.1.07.42 - 1
  
  No apparent problems with any of the facilities.
  
  Problem: I can run SQL Plus command line, but when I click on the icon for SQLDeveloper, nothing happens. No error message, nothing else.
  
  Question #1: Not sure how debug/fix it. Will read through the installation and release for SQLDeveloper, but any suggestions would be welcome.
  
  Question #2: This could be due to a problem with the installation of JDK? It appeared to be successful (no obvious problem), but I do not see anything this either in the Oracle Linux menu system that tells me the JDK was installed successfully. How can I make sure that the JDK installation was successful?
  
  Published by: Peter Hartgerink, 19 June 2012 09:12

  >
  Linux x 64 of SQLDeveloper version is shipped with the JDK. There is a recommended JDK version, with a view to install it before installing SQLDeveloper. What I did with apparent success. I guess I'll have to reinstall the JDK and check my Java versions later. Thank you.
  >
  I don't know what JDK you have downloaded since you didn't say. What version is this? Post the link.

  I can hardly believe that the recommended JDK version is 1.4.2 since it is an OLDER version of Java, you have to hunt to find even for download and, especially, the main download page, sql Developer Announces clear what version of Java is required.
  http://www.Oracle.com/technetwork/developer-tools/SQL-Developer/downloads/index.html
  >
  JDK support
  Oracle SQL Developer 3.1 comes with JDK1.6.0_11. However, you can connect and use any JDK 1.6.0_11 or higher. To use an existing JDK, download the below zip files "with JDK installed.' already
  >
  As you can see you need JDK 1.6.0_11 or above.

  If the version that you say was recommended was actually 1.4.2 is a mistake; view details so that developers can get this fixed an error.

  I don't know what is on your system and can only go by the information you provide
  >
  4 Installing JDK as described in SQLDeveloper for Linux x 64 release notes
  . . .
  version Java '1.4.2 '.
  >
  You have either downloaded the 1.4.2 version which seems unlikely, or your Linux included 1.4.2 and it is used when you try to start sql developer.

  Maybe that your system has now several versions of Java top but the version used by sql developer is evil. If so this is the question that you have to solve.

• Database home page opens is not in oracle linux 4 after installation?

  I just installed oracle 10g express edition (32-bit) R8 in oracle linux 4 (oem 4) that runs on vmware. After the current installation
  application (start)-> oracle 10 g express edition-> homepage go to database. Homepage of database starts on konqureor and it shows
  "An error occurred when loading * http://http//127.0.0.1: % httpport%/apex*:
  
  "Host unknown http.
  
  All other applications including plsql works right which comes with oracle 10 g xe. But I can't start doing plsql, because I can't create a database without having to open the homepage of database without database homepage.
  I also posted this question in yahoo answers (_ http://answers.yahoo.com/question/index;_ylt=AjLqSLCkMZzaJgBv_igbiN7ty6IX;_ylv=3?qid=20120324013912AANOlL9 _) but what responses has been filled that I am not able to understand.
  
  Please help I want to work on the oracle database. I tried for so long. Thanks in advance
  
  Edited by: 921562 March 24, 2012 03:35
  
  Edited by: 921562 March 24, 2012 03:35

  Output message of:

  lsnrctl stat

• Error when creating domain after Installation of OSB OS: linux 64-bit

  Hello
  
  Operating system is Linux 64 bit... Oracle 11g... Could you please suggest what Miss me in the creation of Installation of OSB or domain?
  
  < - > Configuration Wizard of fusion Middleware
  
  Selection of the model request:
  -------------------------------
  
  
  
  Available models
  | ___Basic WebLogic Server Domain - 10.3.3.0 [wlserver_10.3] x
  | ___Oracle BPM Suite - 11.1.1.0 [Oracle_SOA1] [2]
  | ___Oracle SOA Suite - 11.1.1.0 [Oracle_SOA1] x [3]
  | ___Oracle service Extension - 11.1.1.3 GOSA Bus [Oracle_OSB1] [4]
  | ___Oracle Enterprise Manager - 11.1.1.0 [oracle_common] [5]
  | ___Oracle extension of Service Bus - topology of server unique domain - 11.1.1.3 [Oracle_OSB1] [6]
  | ___Oracle extension of Bus Service - all Topologies domain - 11.1.1.3 [Oracle_OSB1] [7]
  | ___WebLogic advanced Web Services for JAX - RPC - 10.3.3.0 Extension [wlserver_10.3] [8]
  | ___Oracle activity monitoring - 11.1.1.0 [Oracle_SOA1] [9]
  | WSM Policy Manager - 11.1.1.0 ___Oracle [oracle_common] [10] x
  | ___Oracle JRF WebServices asynchronous services - 11.1.1.0 [oracle_common] [11]
  | ___Oracle JRF - 11.1.1.0 [oracle_common] [12] x
  | ___WebLogic advanced Web Services for JAX - WS - 10.3.3.0 Extension [wlserver_10.3] [13]
  
  
  * CFGFWK-64040: the model you have selected cannot be applied because the
  * following dependencies have not been met:
  * Unresolved golds:
  * OR Oracle service Bus GOSA Extension: 11.1.1.3
  * [/ opt/oracle/Middleware/Oracle_OSB1/common/models/applications/wlsb]
  * _owsm.jar] <-xml fragment
  * xmlns:fo = "http://www.w3.org/1999/XSL/Format" >
  * < dom: requires a name = "Oracle Service Bus Extension - any field."
  * Topologies"version ="11.1.1.3"located at the same place = 'true '.
  * xmlns:dom = "http://xmlns.oracle.com/weblogic/domain-template" / >
  * < dom: requires a name = "Oracle Service Bus Extension - Single".
  * The server domain topology"version ="11.1.1.3"located at the same place = 'true '.
  * xmlns:dom = "http://xmlns.oracle.com/weblogic/domain-template" / >
  * < / xml fragment >
  
  
  Thank you
  Sushma

  Usually, when you choose Server - Oracle Service Bus Extension for example single domain topology - 11.1.1.3 [Oracle_OSB1], dependencies are selected automatically as well.

  If this is not the case, simply add the products that it is seems to indicate the error, such as Oracle Service Bus GOSA Extension - 11.1.1.3 [Oracle_OSB1].