OME 2.0.1 and Brocade M5424 fc switches

Similar Questions

• Brocade M5424 Fibre Channel blade switch fiber?

  Hello.

  Im trying to support this Brocade M5424 switch blade Fibre Channel equipment and its load of the GBIC 10Gbs with fiber LC connectors. What type of fiber patch cord do I need to connect to another switch? I Googled it out and check it: LC LC PATCH CORD AQUA OM3.

  But my question remains... should I fibre om2 and om3 for the best connection quality?

  Could someone help me with this?

  Thank you

  OM2 and OM3 are assessed for 10 GB. 20 meters, you could run OM2 and OM3 and be able to achieve 10 GB. Here is a guide optical and cable with some information that may be useful.

  http://Dell.to/1XK4qHn

• When I change how a user connects power on and off a screen appears saying "client for Netware has disabled the Welcome screen and the fast user switching. To restore these features...

  Original title: how to uninstall client services for netware?

  When I change how a user connects power on and off a screen appears saying "client for Netware has disabled the Welcome screen and the fast user switching. To restore these features, you must uninstall client services for Netware... But it is impossible to find... Help?

  Hello LindsayJune,

  Click the Start button.
  Click on Control Panel. Select network connections
  Right click on 'Connect to the Local network', then click 'properties '.
  Search for "Client Service for NetWare" slot "this connection uses the following items."
  Click it, and then click the "Uninstall" button
  Restart your computer.

  Uninstall client for Netware feature will allow the option of quick change of user on your computer.

  I hope this helps.

• In XP, cannot change the way users log on and outside, getting the error "a recently installed program has disabled the Welcome screen and the user fast switching.

  The switch on my fast computer of user function has been disabled on my computer. When I try to use this function. I get the following message.

  A recently installed program has disabled the Welcome screen and the fast user switching. To restore these features, you must uninstall the program

  . The following file can help you identify the program that made the change. GT Gina.dll

  * original title - I have a windows xp. Under user accounts, choose a task. Under change the way users log on and outside.  I get a message that the function of the Welcome screen has been blocked *.

  Hello

  You can try the steps outlined in the article below and check out them.

  The logon screen "Welcome to Windows" does not appear when you start the computer
  http://support.Microsoft.com/kb/817142

• I can't access my home screen and the fast user switching!

  I get an error message when I try to change the way I connect
  "client services for NetWare has disabled the Welcome screen and the fast user switching. To restore these features, you must uninstall the Client Services for NetWare. "
  What is NetWare? Where is he? I don't find it on my program list to remove it! Help!

  To resolve this issue, follow these steps. NOTE: If you rely on access to a Novell network and need the Client Service for Netware or the Novell Client, you cannot use the home screen or fast Windows XP user switching features.

  1. If you are using the Novell Client, see the following Web site for instructions on how to uninstall Novell support:
     http://support.Novell.com (http://support.novell.com/)
  2. If you are using the classic view in Control Panel, double-click network connections. If you are using the category view, click on network connections and Internetand then click on network connections.
  3. Right-click each connection that you have, and then click Properties each time.
  4. Under the tab general in each Local network connection, select the Client Service for Netware, and then click Uninstall.
  5. In the Dial-up connection properties dialog box, click the Networking tab, highlight the Client Service for Netwareand then click Uninstall.
  6. Restart the computer.
  7. Open Control Panel, and then double-click user accounts.
  8. Under pick a task..., click on change the way users log on or off the power.
  9. Click to select the opening and closing of session options you want: use of the Welcome screen or use quick user change.

• How to get disabled login user (without password) at startup, so NOT to SHOW at all and so after the switch, go to desktop directly

  Vista Ultimate 64-bit

  How to get disabled login user (without password) at startup, so NOT to SHOW it to all (and needed clicked) and so after the switch, go to desktop directly?

  Also after inactivity, how to not go to sleep mode and press "power on" to bring back?

  Hello

  If you want to start directly on the desktop?

  How to automatically connect at startup in Vista
  http://www.Vistax64.com/tutorials/66966-logon-automatically.html

  Or

  How to make Vista require a user name and password when connecting
  http://www.Vistax64.com/tutorials/89812-logon-username-password.html

  =========================================

  Start - Control Panel - Power Options - upper left - require a password on wake up
  tick her do not require a password - save the changes.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• IM on an annual plan and you want to switch to the monthly. How to do?

  IM on an annual plan and you want to switch to the monthly. How to do?

  Hello

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• ACS and Brocade switch support!

  Hi Experts,

  I have two questions: -.

  (1) does support switch of Broacade CSA?

  (2) I am configuring a Brocade switch for Radius Authentication on an ACS server. But the right to the user and not a right admin?

  Can you please tell me how to assign the admin for brocade switch?

  Thanks in advance.

  Concerning

  Neha.

  Configure the ACS unit to import your CSV

  A. go to the Interface of Configuration > Advanced Options

  B. check RDBMS synchronization and click on submit

  C. go to the System Configuration > RDBMS synchronization

  D. Enter the name of the CSV in the Actions file field

  E. Enter the IP of the server FTP, the directory where the CSV file resides on the server FTP and the username and password for ACS to use to access the FTP server in the fields suitable

  F. choose manual synchronization

  G. make sure your server is listed in the column to synchronize synchronization partners section and click on submit

  H. go back into the RDBMS synchronization and click Synchronize now and updates must take place.

• 6120 UCS connect to the Brocade 300 FC switch

  We buy a UCS with 6120's and will connect the CF modules to our 8 GB Brocade 300 switches.  My questions are:

  1 are there problems with the connection of the 6120's to the 300?

  2. can I have two separate fabrics?

  3. are there potential loop or latency problems as I go to my EMC CX4 of 6120's by the 300?

  Basically, any comment is welcome :-)

  Thank you!!

  1. Brocade switches will work very well connected to the 6120. The main requirement is that they support NPIV.
  2. Yes you can, and indeed, what would be the recommended path. Fabric Interconnect will connect to A Brocade, while the fabric interconnect B connects to the Brocade B. The interconnections of fabric or the brocades are interconnected, leaving you with two different fabrics. In each UCS Manager Service profile, you can then set up a vHBA for each fabric.
  3. No loops exist, although the fabric of the interconnections will be set up a small amount of latency, as shown in this link. Tiny enough to be negligible if and as the link explains the fabric is lossless.

  http://www.Cisco.com/en/us/prod/collateral/ps10265/ps10276/data_sheet_c78-524724.html

• Cisco 6248 FI to Brocade 6510 SAN switch shows Link Down

  Hi all

  His new installation of Cisco UCS with Brocade SAN switch 6510.

  I followed the Cisco UCS to Brocade connectivity Guide.

  Even if the switch side so FI link is not coming. No lights are glowing.

  When I checked the switchshow @Brocade 6510, ports are No_Light status display. Where in other ports, it indicates the number of my storage device WWN.

  At the END, when I click on ports CF, its projection on all State - link down.

  Any who are facing this problem. ?

  Am I missing some configuration steps?

  Kind regards

  Praveen

  This should be a trivial or a very complex problem. I'd rather commonplace.

  Brocade is a CF 16 G switch; up to 8 G negotiation seems to work (storage subsystem).

  Maybe you could try to set the speed on the Brocade 8G port fix!

  Or something with the cables is wrong? Send / receive Crusaders?

  Are shortwave of the MMF SFP? cables connection as well?

  Connect cable from port for example. 31-33, 32 to 34 and see if it works?

• MSN NBC articles are empty on the site and I have to switch to Internet Explorer.

  MSN.com has a series of windows to article passing. When I select that indicates (in the upper left corner) is a NBC article, the page is black. I don't have this problem with Internet Explorer or Safari.

  You can try the following steps in case of problems with web pages:

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Bluetooth stereo headset and Skype - have to switch manually to sound card

  Hello

  I use the Bluetooth stereo headset and Toshiba bluetooth stack for Toshiba bluetooth adapter No.

  I need to connect the headphones so that he was an audio device by default when it is connected. I plugged the headphones using link HOWTO: [this | http://aps2.toshiba-tro.de/kb0/HTD9602MS0000R01.htm] page.

  The problem is that while the headset is disconnected, soundcard, assosiated to Headset profile remains peripheral by default for Skype (it does not disappear from the Device Manager) and I need to change back to the usual card manually.

  The second problem is that automatically when the headset is turned on, it connects to the PC using the profile not headphone A2DP. and to connect to AD2P, I must again manually.

  I'd be happy to help all problems, thank you.

  Have you ever found a solution?

  Unfortunately I don't have a solution for you, but I m interesting how to solve this problem

• Games on an M70-144 and the curious graphics switch

  Just I bought just a Satellite M70-144 today to replace my aging HP omnibook 500, but I have a few questions to you out there that already have this pc.
  1. my machine play modern games like doom3 battlefield 2...
  2. What is happening with the graphics card?
  I bought knowing it was a 128 MB ati x 700, I got an im from 256 MB ati x 700 complains not but just curious
  3. why the dvd quality is so bad?
  Thank you
  dyer313

  Hi dyer

  First of all, I think that you are a man of taste. I saw this camera a few days ago and it's nice peace of equipment. I like it a lot.

  1. it is most recent device of the M series with hardware configuration very good and I don't see any reason why you will not be able to play the latest pc games. Try it!
  2. According to the specification of this unit has graphics card ATI Mobility Radeon X 700 with the ability of the local cache of 256 MB
  3. Please be more specific about this. This unit has fantastic TruBrite screen, and I can't imagine that the quality of DVD can be bad.

  Good bye

• Can I connect a VGA cable simultaneously with a DVI cable to a monitor and use the source switch?

  I found a similar, but not exact question and I was wondering if I could use the VGA cable AND cable DVI simultaneously on a HP 2159 m monitor and switch back and forth from analog and digital using the source switch on the screen? I noticed that some casual games such as found at BigFish and other gaming sites works best on VGA on DVI but I like to watch movies and other DVI instead of VGA?

  I did two HP 2159 m monitor but it could in fact be wise space more convenient to just use the right now and switch from the analog to the digital format.

  Thanks for any response.

  Hello

  You will need to edit the video in the monitor source selection when you want to switch.  Don't put it on AUTO.

  For a test, connect two monitors and then configure your PC for two monitors. Then, remove the monitor as the secondary (VGA) and now connect the cable to the main monitor VGA port.  Now try the video source selection in the menu of the monitor.  I never tried it on my 2159 m but it can work.

  Some monitors do not react to two active flows.

• T61: cover and non-functioning lights switch problem

  My T61 (type 6465) is coming for three years and has recently developed some minor but annoying flaws. The main problem is that the most reliable laptop will remain suspended: closing the lid does not have to be suspended in the first place and if I use Fn + F4 to suspend, it seems that clutching the back edge of the laptop (that you could do to pick it up and put it in a bag) cause him back on the suspension. Accordingly, I found the cell phone on when you remove it from my backpack, even if I was sure that I had hung before storing.

  The other symptoms, is that some of the green lights have stopped working. Namely, the green lights of power, battery, caps lock num and caps lock seem to have stopped running, but wireless, hard drive and activity to suspend lights continues to work. In addition, the orange battery light works very well.

  Other that the system continues to work perfectly: the battery is still good and maintain the load, the power supply charges the battery and powers the system properly. Power management applications show the correct information about the power status of the system (i.e. on current AC or battery-operated).

  I try to work if this is likely to be a hardware failure or a software problem initially. Has anyone seem to similar symptoms, or may suggest that the problem could be based on my description?

  See you soon,.

  -Mark.

  non-functioning lights is most likely a hardware problem.