OMG! Help, please! my windows laptop starts propely...

Similar Questions

• URGENT HELP PLEASE! Windows did an automatic update finished & gave me the Option "restart now or later. I chose Now.A screen from Windows is going down, a startup problem occurred immediately after the installation of updates, this has happened about 9 h

  Windows has finished just do the automatic updates on my Sony Vaio... He said that he should be released on... When it restarted it goes to the ' start windows normally, safe mode, safe mode w/network, safe w/command prompt mode and the last known good configuration "screen... I tried "start windows normally", and last known good configuration, and no matter what I did, it looks like its about to begin, with the 'windows' logo & he says it's the boot process, but then instantly a screen flashes, but too fast for me to read what he says, so I immediately finished fashion splash screen choose again. Whenever I try to get my PC to boot it goes through this again. Exactly... I tried restarting, shutdown PC up to 30 min. waiting & more & again it does the same thing & will NOT start! HELP PLEASE!
  I do not have my current work & News & saved downloads & need help & I timed commitments to people... ASAP PLEASE!
  Thanking you in advance...

  Windows XP logon screen does not appear and the computer continuously restarts
  http://support.Microsoft.com/kb/310396

  Resources to solve startup problems in Windows XP
  http://support.Microsoft.com/kb/308041 TaurArian [MVP] 2005-2010 - Update Services

• Need help with the Windows Vista Start Menu

  So, I turned on my computer today and clicked on the start menu, I expanded the tab all programs and was shocked to see that it was empty. Tab Assecories, Extras and upgrades, games, all of them, all tabs have disappeared. Is any way to restore? I don't know how to get to the Defrag disk or cleaning disc or one of these things without it. Help, please!

  -Tim

  A plus for you to try.

  It still happens today. Yes?

  Why not do a system restore.

  Choose 2 days ago, or a date then your list of all the programs worked as your restore point.

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

• Stop: c000021a {fatal error} the windows logon system process ended unexpectedly with the status of 0xc0000034 (0x00000000) (0x00000000) need help please system does not start

  Hi my HP Compact computer running with windows Xp professional recently had security tool, antimelware doctor and I kind of have got rid of him, he also put some viruses on the winlog thing and I could not get rid of it with antivirus software that I don't know the name of, Malwarebytes' Anti-Malware and AVG 2011 I did a scan antivirus in safe mode with AVG(in command prompt mode) and he put a bunch of virus the virus volt, I'm out there and there was a running called 2008 command prompt and I clicked on output and it says that this program is not complete (or something similar) save all unfinished work before going out and me did not run this command prompt , so I left Malwarebytes' Anti-Malware and avg, then I restart my computer and we get the blue screen of death say stop: c000021a {fatal error} unexpectedly finished process windows logon process system with the status of 0xc0000034 (0x00000000) (0x00000000) system will reboot, and whenever it restarts, it says the same thing, I can't use safe mode cause it resets and starts normally any help pls I have files I need this computer?

  You can create a bootable XP Recovery CD of Console and replace the file, but it may be easier for you to make boot CD of a Hren.

  When you start the Hiren's CD, choose the XP Mode of Mini and it has an interface in XP style Explorer where you can find and replace the winlogon.exe suspicious or missing file.

  There should be a copy of winlogon.exe here:

  c:\Windows\System32\dllcache

  Rename your current c:\windows\system32\winlogon.exe file (if it exists) and copy / paste the replacement of c:\windows\system32\dllcache.  If you do not see here, search your HARD drive and find one.  Another possibility (depending on your environment) is c:\windows\ServicePackFiles\i386, or c:\i386 d:\i386...

  You just need to replace the file winlogon.exe somehow.

  When you are finished replacing, restart as usual (remove the CD bootable of course).

  With the help of Hiren, you can also copy offshore on an external device (USB key or HARD drive), all personal security files.

  Do you have a Hiren BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

  There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision).

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Help please the windows does not start in safe mode

  I have windows 7 and I got a simple error that I need to fix but I need to get into safe mode. I'm doing the tapping of f8, but it just goes to the login page. Ive tried several times and just can't get it

  Hello

  There are 2 methods to get into Safe Mode.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Windows7

  Use the msconfig method:

  Using the method of System Configuration tool:

  Note: If you have problems to enter Safe Mode using the F8 method, don't use this method to force so that it starts in mode without failure. For reasons that why you should read this.

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu, type in msconfig as shown in Figure 12 below.
     
     Figure 12. Windows 7 search box

     Then press enter on your keyboard.

  4. The System Configuration utility will open and you will see a screen similar to the one below.

     Click the Startup tab.

  5. You will now be the home screen as shown below.

     Put a checkmark in the checkbox Start secure

  6. Press the apply button and then press the OK button.
  7. Now, you will see a prompt stating that you must restart the computer to apply the change.

     Click the restart button to restart your computer.

  8. Your computer will now restart directly in Mode without failure. When you get to the Windows 7 logon screen, log on to the computer and perform all the necessary tasks.
  9. When done with your tasks, starting in Safe Mode, start msconfig.
  10. When the program is opened and you are on the general tab, select the Normal startupoption.
  11. Press the apply button, then the OK button.

  See you soon.

• HELP Please with Windows Mail

  I tried for 5 hours now to configure Windows Mail on my laptop.  I contacted windows chat support and they were no help.  I would like to see the email in my AOL email account in my mailbox Windows.

  According to AOL:

  'The incoming (POP) mail server address's imap.aol.com and imap.aim.com for IMAP and pop.aol.com or pop.aim.com for POP3.

  The address of the outgoing (SMTP) mail server is smtp.aol.com or smtp.aim.com, port: 587. »

  In Windows Mail, I clicked on the accounts and entering, I pasted "pop.aol.com" so leaving, I pasted "smtp.aol.com".  Then, I went to properties and under the advance of the tap which is written "outgoing (SMTP) mail:" I typed "587".

  My AOL emails are coming thanks to perfect, but when I try to send an email through Windows Mail I get the following error message:

  "The message could not be sent. The authentication setting are may not be wrong for your e-mail [SMTP] Server outgoing. To resolve this issue, go to help, search for "Troubleshoot Windows Mail" and read the section "I have problems sending e-mail". If you need help to determine the appropriate server settings, contact your e-mail service provider.

  The rejected e-mail address was ' * address email is removed from the privacy *'. ' Subject 'in progress test', account: 'pop.aol.com', server: 'smtp.aol.com', Protocol: SMTP, server response: 553 5.7.1 <*** email="" address="" is="" removed="" for="" privacy="" ***="">: denied sender address: not connected ', Port: 587, secure (SSL): no, Server error: 553, error number: 0x800CCC79.

  I don't know what else to do!  Can someone please tell me what I'm doing wrong?

  Thank you. Heather

  Windows Mail: Setting up an account of end-to-end
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

  How to configure an AOL e-mail account in Outlook Express and Windows Mail
  http://www.postmaster.AOL.com/IMAP/Express.html

  Bruce Hagen ~ MS - MVP [Mail]

• Help, please. Windows 8 not able to open programs

  I have a laptop windows 8 and just today, I was not able to open programs as Google chrome (it would show up the failure of execution as 'server') and I'm not able to stop, restart, or put my laptop in standby mode.

  Hi Dan,.

  I'll be happy to help you with the problem you have with the computer. I understand the frustration when things do not work as it should.

  1. when exactly you get the error?

  2. are you able to connect to the computer?

  I suggest to remove the laptop battery, wait 30 seconds and put the batteries in the computer and try to start the computer, check if it works.

  Now, start the computer in safe mode and check if it has the same problem. To find out how to start the computer in safe mode, follow the link below:

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-safe-mode

  If you do not have the problem in safe mode, please, start your computer in a clean boot and see if the problem still occurs:

  I suggest you follow the link below to find out how to place the computer in a clean boot.

  https://support.Microsoft.com/kb/929135

  Note: Reset the computer in Normal mode once you have completed troubleshooting as a result of the "How to reset the computer to start normally after a boot minimum troubleshooting" section of this article.

  Just reply with the results. I'll be happy to help you.

• Help, please! Trendy laptop, do not load, storage capacity of the portable computer is low...

  I have a HP Envy Ultrabook, who settled with Windows 7.  When I tried to turn it on today, it not light.  I think it was just short of battery connected and received the message, "the system has detected the following battery storage capacity is very low.»  For optimal performance the battery may need to be replaced. »

  Once logged into my account, I noticed that the battery was "connected, but does not charge."  I tried many remedies online, as the battery method Microsoft ACPI compatible control the uninstalling and turning and turn it on again.  But nothing seems to work.  I even checked to see if it was a problem with Windows 7, and I saw that Windows 7 eats battery life very quickly, but I don't think it happened the day after like me did it.  I was able to use it for 4 hours without recharge yesterday until my battery has reached 10%.

  Please help me.  I've only had my laptop for 6 months now, way earlier than my 1 year warranty, and I was able to use my laptop, unplugged, for a good 4 hours until today.  Why is did this happen all of a sudden?

  Another thing I might add is, I tried to upgrade to Windows 8, but I ended up doing a pause the download and I closed out of the window without leaving Windows 8 download.  But it's the only thing I can think that it is out of the ordinary.

  Looks like I couldn't do something for myself, I had to send to HP for repair, laptop now upwards and being run, but thanks for the help all who responded!

• can you help please .connect your laptop to my desktop.

  I have a desktop computer using windows vista bit, windows Explorer ultimate.32 internet 9.

  now, I bought a laptop (Packard bell.windows XP) for my wife can run this laptop with my broadband office...
  If Yes, how I put it all up.in layman please.i understand I take the laptop outdoors using his batteries.to run it.and e-mail from him as well.so, if I could know how to put in all for my wife.could you please help
  I have

  You need to get a wireless router if your broadband service provider did not provide one. Check out these articles on how to implement.

  http://Windows.Microsoft.com/en-GB/Windows-Vista/setting-up-a-wireless-network

  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

  You are complicating things a bit by using another operating system on your laptop.

• My images folder has changed to a double D:? Help, please! -windows - 7

  Hey there. I have a new computer (asus x53u) laptop and am running windows 7 Home premium, 64-bit version. Service Pack1. Anyway, fairly new to windows 7 and new on a partitioned hard drive! Currently, all my documents/videos etc. were stored on the C: drive, the same as my operating system. I was changing the location of my pictures on the D: drive. I did it by going to start, by clicking on my name, right click on photo and clicking Properties. I then went to the place. (this method has worked for others, such as video) I then clicked on 'move', then 'computer', then 'storage D: D: – once opened, when I would normally choose the duplicate folder, I created, in this case 'images'. However I clicked the button 'Select folder', without actually selecting a folder first. : 0 (so what was the 'images' folder has now transformed into "Storage D:" - when I click Properties, it turns out that my hard drive!) It says "type: local drive, file system: NTFS"- and of course shows the pie scale. I tried to revert to the situation and move them to the folder images duplicate, I created for her. When I click on apply he asks me if I want to move all the files to the new location. I click Yes and then get an error message reading: cannot redirect parent down. The specified path is not valid. I also tried clicking 'restore the default' on the location tab, click on apply, when asked if I want to move the files to the new location I select Yes, then get an error message that says: failure of the list of regular subfolders under "D:\MSOCache" Acess is denied. (I am the administrator on this computer)... Thank you very much for your help and your expertise, I looked everywhere trying to find a solution! Best regards, Brendan

  Hello

  You try to perform a system restore to restore the work correctly the settings, to do that follow the instructions below:
  a. Click Start, type system restore in the search box and then in the list click on the system restore program. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  b. in the System Restore dialog box, click on choose a different restore point and then click Next.
  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
  d. click Finish.
  For more information, see this link below.
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

• HELP PLEASE! Windows 8 does not recognize my DVD drive

  I found the answer on another forum to help.  It was a real problem of Bios.  For any CD start the BIOS should be replaced by the legacy mode.  Thank you very much to all those who responded!

  Hello

  Thanks for the reply.

  I am happy to know that your problems has been resolved through your own efforts.

  Feel free to write us if you have any other issues related to Windows.

• Help, please! Windows WebLogic admin server and managed server service

  Hello
  
  I have an admin server and 2 managed servers. I want to create a windows service so that my server admin and 2 managed servers start as a windows service.
  
  I'm following the documentation at: http://weblogic-wonders.com/weblogic/2011/02/01/weblogic-as-a-windows-service/
  
  
  but I have problems understanding as the documentation lacks some important points. It says that I need to create a custom startup script.
  
  Can someone please tell me: -.
  
  
  
  
  (1) I have to create 3 different with 3 different (one for the server admin) file names and 2 for managed servers?
  
  (2) what should be the names? I've created a script with the name startAdminServer.cmd for the administrator of the server to destination = > C:\Oracle\Middleware\user_projects\domains\base_domain\config\startup but it gives me an error when I try to run the script by saying 'the file name, directory name or volume label syntax is incorrect. "
  
  (3) is the content of the script correct admin = >
  
  SETLOCAL
  
  Set DomainName = Wonders_Domain
  
  Set USERDOMAIN_HOME = C:\BEA103\user_projects\domains\Wonders_Domain
  
  Define SERVER_NAME = AdminServer
  
  Set WL_HOME=C:\BEA103\wlserver_10.3
  
  Set WLS_USER = weblogic
  
  Set WLS_PW = weblogic
  
  Set PRODUCTION_MODE = true
  
  MEM_ARGS =-Xms512m-Xmx512m set
  
  Call "% WL_HOME%\server\bin\installSvc.cmd".
  
  ENDLOCAL
  
  
  
  (4) after I executed the script mentioned above what are my next steps? I create a similar script as the one above for example managed servers and run them individually?
  
  
  (5) after I ran all 3 scripts change the installSvc.cmd file to set a delay so that the managed servers start after the server administrator? How do I do that?
  
  
  
  
  I would appreciate any assistance. Please let me know if you have any questions. I tried to explain it the best possible.
  
  Published by: user9021545 on April 26, 2011 17:26
  
  Published by: user9021545 on April 26, 2011 17:28
  
  Published by: user9021545 on April 26, 2011 17:28

  Hello

  The post below

  http://WebLogic-wonders.com/WebLogic/2011/02/01/WebLogic-as-a-Windows-service/

  shows how we can make the server administrator and the server run as a windows service, referring to an area of sample called 'Wonders_Domain '.

  Your questions:

  (* 1) I have to create 3 different with 3 different (one for the server admin) file names and 2 for managed servers? *

  Rep. : Yes, the settings of the server administrator and the managed server are different then you its recommended to have scripts for each of the servers.

  (* 2) what should be the names? I've created a script with the name startAdminServer.cmd for the administrator of the server to verbal-online C:\Oracle\Middleware\user_projects\domains\base_domain\config\startup but it gives me an error when I try to run the script by saying 'the file name, directory name or volume label syntax is incorrect. " *

  Rep. : The name is not important. The values contained in the script should be relevant to your area of work environment.

  The values in the pasted script refers to the environment of the author, replace them with your own environment settings.

  You can specify the servername, DomainName, USERDOMAIN_HOME, WL_HOME according to your environment.

  Please let me know if you have any other questions.

  Kind regards
  Julien
  http://WebLogic-wonders.com/

• Help, please! Windows Live mails in the sent folder, but not received by some clients

  Windows 7

  Windows Live Mail

  POP3

  Out going Server Port is set to 25

  Microsoft Security Essentials

  We had a problem where some - not all - of our messages are not received. When these messages are sent, they do not throw a notification saying that they cannot be delivered and they appear in the "sent" folder as usual.

  We are a company that sends quotes to potential customers, so we really need it is resolved as soon as POSSIBLE. We will send about 10 quotes per week and at least once a fortnight we will have someone complain that they have not received their e-mail while the others will be fine.

  The emails that we send have attachments so sometimes fall into undesirable people, but sometimes they are not either and we must resort to getting a second e-mail address to the sent message.

  If anyone can help me with this very frustrating problem, I would be very grateful.

  Thank you

  Thanks for your replies, but I have now solved the problem by changing the port from 25 to 465 number.

• HELP Please! Windows blocked

  When I closed windows, he's stuck in the display "Windows is going down.". I tried ctr-alt-del, close the comments, re-departure from mac, it doesn't matter nothing works. When I start up and the session is restored, windows is still stuck.

  How can I get windows to restart or end the closure?

  Thank you

  Note: It's like pulling the plug of the wall on a physical computer. Whatever this is not saved will be lost and there is always the possibility of corrupting the file system where preforming a hard stop! (Even if you have no choice but to do.)

  VMware Fusion menu bar > VM > press the option key and select Power Off

  By pressing the keys alt/option "Shutdown called" changes to "Power Off".

  Note: It also changes orders of "Suspend comments" and "Restart Guest' too.

  Or if this does not work then...

  On the library Virtual Machine ctrl - click on the target of the Virtual Machine and select Show in Finder and delete the .vmss file, the ctrl + click the target package of Virtual Machine, and then after the merger closed. Note: All that was not justified for the suspended state will be lost by deleting the .vmss file. Note: But you will have no other choice is the Virtual Machine will not suspend/resume/stop/start correctly.

• Ms more recent update for my VISTA plus old (2008 Acer laptop) was the last event, now cannot start PC... recovery tests without success... Help, please...

  Ms more recent update for my VISTA plus old (2008 Acer laptop) was the last event, now cannot start PC... try to recovery without success, a loop back and asking to recover or normal boot...  Attached to jumps, safe to ask if I want to recover...  I never received an OEM of VISTA version, but the first time having problem after all these years...   Help, please...  Would contribute to a boot disk, if so, how can I get a copy?...  Thanks, Dave * address email is removed from the privacy *

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And here's how to use Recovery of Acer.

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the Acer eRecovery Management application is loaded, select your type of restore.
  5. Read the review and then click Next when you are ready.
  6. Click Next to start the restore process. It may take 10 minutes up to an hour fom anywhere to restore.
  7. Once the restore is complete, your computer will restart. After the reboot it will load Windows and start the installation of your software and drivers. Your computer will restart several times during this process. Once they are all completed, your computer will be like it was when you bought it first.

  See you soon.