Is there a utility to validate the windows updates before installing Oracle EMP?

Similar Questions

• Anyone know if there is a problem with the "Windows Update" site? Since May 11, 2010...

  Anyone know if there is a problem with the "Windows Update" site? As of May 11, 2010 I could not access it for 2 days now.  I get an error report indicating that he has a "problem with the site '... Not sure if it's my computer or the site itself. I just need to check updates and download them. I would be grateful for any feedback...  Thank you!
  ~ Jenifer

  It is without a doubt.  There were a few patches published today, and I was able to update all my machines successfully.  This looks more like a virus problem.  Have you run a virus scan recently?  Many times, if you are infected the virus will prevent you to access Windows Update.

  You can also use Microsoft Fix It to reset the Windows Update components: http://support.microsoft.com/kb/971058.  This could also be your problem.

  Let me know how it goes,

  Barbara

• How to control the Windows updates are installed on the Windows Surface of RT

  I recently had to perform a refresh to solve the problem with desktop on the desktop icons that appear as spaces. After the update, I had to reinstall the update for Office 2013. When I went to Windows Update to do this, I found it with a group of 9 other updates, these 9 were all marked as ready for download and installation, Office 2013 update is not checked. I disabled the office 2013 update and not the other 9 updates, thinking that I could make those after I had Office installed upgrading so I would like to know if my taskbar icon problem has been resolved. At the bottom of the screen even when the Office update was the only update checked I chose to install updates. The Surface actually installed all updates, not only the update of Office.

  Is there a way to control which Windows updates are installed in fact at some point? Unchecking them made no difference.

  Hello

  Welcome to the Microsoft community!

  I understand that you are facing problems while installing Windows updates and want to know if there is a way to control which Windows updates are installed in fact at some point. I'm here to help you.

  I suggest to refer to the following article and perform the steps mentioned there.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-8/troubleshoot-problems-installing-updates

  Automatic update of Windows: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• There, nobody how to remove the windows update program?

  If anyone knows how to remove the update on a laptop program can they please leave me a message telling me how to. It is causing major issues on my sister's laptop, but microsoft are not willing to help solve the problems caused by the update program! I recommend to everybody out there to change your settings to update to you forever, you are better off not having them f * to the top of your laptop!

  I need to know how to remove a laptop with windows 7 and a laptop with windows xp. Thanks!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  You don't delete it. You set to operate in the way that you choose. Find in files of aid, or Google.

• Windows Update crashes, install update 16 of 18

  Original title: windows machine update caused to hang

  The machine seems to have hung over the windows update process - the rest of the screen to "do not turn off or unplug your machine." Installation update 16 of 18. At this point, he remained for over half an hour. What can I do?

  Hi Alfredlee,

  If the window is still blocked on the installation of update page, you can restart the computer, choose start normally and check what is happening.

  Step 1:

  If you are not able to boot normally to the desktop, you can consult the following link and try the steps.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  Step 2: When you're able to start normally, check the history of update to discover updates failed by following the link:

  See the Windows updates are installed

  Step 3:

  If there are updates failed, then try to download and install the stand-alone package with updates from the Microsoft Download Center.

  a. to download updates from the Microsoft Download Center

  b. Enter the item number in the field search and download the same.

  c. double-click on the downloaded file.

  d. click on run and follow the wizard to install it.

  Hope this information is useful.

• So, how can I knowif and Windows Update has installed correctly. Because my computer closed connection or and I have to restart.

  Theres times that I am on my computer and I lose the connection and theres times I'm on facebook or a game. And I try to go up and down.  and stop it stops in the middle of a game or facebook. Sometimes it I see the line over and over again.

  Hi Jo AnnHerrera,.

  What browser do you use to play games?

  You can visit Windows update history to check the recently installed updates, failed.

  Check the update history to see what updates have been installed. Visit the below mentioned link.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  If you use Internet Explorer to play games, refer to the suggestions from this link.

  The problems of games online using Internet Explorer
  http://support.Microsoft.com/kb/2528246

  I hope this helps.

• I forgot my apple ID sequrity question, several times I tried to reset my sequrity question but there is no display on the window to reset (reset sequrity awnser) .please help me.thanks

  I forgot my apple ID sequrity question, several times I tried to reset my sequrity question but there is no display on the window to reset (reset sequrity awnser) .please help me.thanks

  Hello

  You will need the answers to your security questions.

  Follow the instructions here > If you forgot your Apple ID - Apple Support security questions answered

• Message 'there is a problem with the Windows Installer package

  I have Vista 64-bit Service pack 2

  On my computer HP ProtectSmart Hard Drive Protection has stopped working... .it shows such as the disabled and 'activate' is grey.

  I went to HP to download the new version.  It downloaded, but then to install I got the following message:

  "There is a problem with the Windows Installer Package.  A program run as part of the Setup did not finish as expected.  Contact your supplier of staff or the package of support ".

  How can I fix?

  Please help pleas...

  Thank you

  "C:\Windows\system32\msiexec.exe'-I 'C:\Users\David Candy\AppData\Local\Temp\IPDT_Install.msi '.

  Is the command line to install a particular product. Use the Task Manager to find your command line.

  Then change to add logging.

  "C:\Windows\system32\msiexec.exe" - working '% userprofile%\desktop\install.log'-I 'C:\Users\David Candy\AppData\Local\Temp\IPDT_Install.msi '.

  FixIt

  Microsoft has a range of automatic programs to solve common problems. To see Windows Installer problems

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  
  --

• Is there a way to keep the window Photoshop CC open to the original format without using the F key

  Is there something preferably that keeps the window Photoshop CC open to full scale instead of always using the F key to switch between windows?

  lleev wrote:

  Is there something preferably that keeps the window Photoshop CC open to full scale instead of always using the F key to switch between windows?

  You could set up an Action to switch between display modes and trigger it with a shortcut, like the F key

• Is there a way to define the window FILES in Adobe Bridge, as a view column?

  I'm used to the way Finder displays folders on Mac (see column). I would like, if possible, to have the ability to set the folders in bridge to column view window:

  Finder column view:

  

  Instead of displaying the list of bridge:

  

  Is there a way to set the window FILES in Adobe Bridge, as a column view like in the Finder of Mac OS x?

  Is there a way to set the window FILES in Adobe Bridge, as a column view like in the Finder of Mac OS x?

  No, but it's a very nice idea, add it to the feature request page:

  http://feedback.Photoshop.com/photoshop_family/

• Boot Camp: This disc seems to have been divided by another utility. It must be erased before installing Windows.

  I have a SATA Western Digital to 6 TB drive on my Mac Pro 2012.  I thought "what better place to put a bootcamp partition?  But when I went to use the Boot Camp Assistant, I was greeted with this:

  Boot Camp: This disc seems to have been divided by another utility. It must be erased before installing Windows.

  

  I thought ' OK - I'll delete data... Use utility disk to erase the disk completely, and then try again.  After a few hours, I used... completely partitioned disk utility disk and tried again.

  Same message.

  It seems that for some reason I can erase completely and use the entire disk for Windows (blah) or should I use another drive or not Boot Camp at all.  Is there a problem with the size of the hard drive Boot Camp can support?  Any advice?

  Hello ElPapa,

  Thank you for using communities of Apple Support.

  I understand that you want to put a Boot Camp partition on your Western Digital HD connected to your Mac Pro. What is your boot drive? If this isn't the case, it could be part of your problem. According to the following article on installing Microsoft Windows using Boot Camp, it is said that you need "at least 55 GB of free disk space on your startup disk".

  How to install Windows using Boot Camp

  If you install it on your boot drive and still get this message, take a look at this article: Boot Camp: alert message Partition when you use Boot Camp Assistant

  Best regards.

• When attempting to open the windows updates, it opens an empty window and disappears.

  Update window won't pop up

  So basically when I click on windows update window appears blank and disappears again. Any idea on what to do to fix? I don't know what happened and I don't know how to fix it. Maybe download something? But I don't know what.

  Thanks for any help you can give

  Quote: "the Windows Update forum is one of the three forums that doesn't have different forums for different versions of Windows (Internet Explorer and the game are the others)."  With this in mind, we ask that you postat LEAST the following information.  If you don't know how to find some of the information and then post what you can and let us know that you need help to find information.

  Minimum information to validate:
  Version of Windows and Service pack level. (Windows XP Home Edition, SP3; Vista Home Premium, SP1; Windows 7 Ultimate, etc...)
  Post also if you use 32-bit or the 64 bit version of Windows.

  Update the number of the last update installed before any problem.  If you do not know the number of update, then give the date that the update has been installed.  The number of updates update failed.

  Error code updates failed or if you think an update caused a blue screen, give the blue screen error codes.

  Other information to validate:
  Measures already taken to correct the problem and the results of the measures.

  If the question is never happened before with other updates.

  A few other useful parts are:
  What program antivirus you use, if it is up-to-date, and there has never been any other installed antivirus program.
  If your version of Windows has been upgraded from a previous version or if it came with (or clean installed with) the version you are currently using.

  Mike - Microsoft Answers Support Engineer"

  Words

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

  TaurArian [MVP] 2005-2011 - Update Services

• I'm not abe to do the Windows updates, message warns me that the service is not running

  I can't do an update of windows due to a message saying that the service is not running.  What this means and how can I solve the problem.

  Hi EmogeneHutchinson,

  ·         Did you do changes on the computer before the show?

  ·         You install updates?

  ·         What is the full error message?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

• Windows Update cannot install the update of Security No.2686509

  Windows Update has tried about 18 times to install the 2686509 update, and it does not reach every time, how can I install it

  Hi LyneDerksen,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

• Configuration of the windows updates failed, returning error Exchange

  I have a laptop windows 8.  Whenever I run windows updates, I get the error message "failed to setup of the windows updates, returning error changes.  I tried the windows update troubleshooting tool and download the updates manually but still no change.   Is there a solution to this?

  Thank you.   Often, when I try to run windows updates I get error like 80242FFF codes; 800703F1.

  Hi Zurkon,

  Thank you for your update on the issue.

  If you receive Windows Update error 80073712 0 x or 80073712, it means that a file needed by Windows Update is corrupted or missing. Windows has tools that can help you solve this problem of troubleshooting. I would suggest trying the following methods and check if the problem persists.

  Method 1: Run the Windows Update Troubleshooter

  • Run the Windows Update utility, then open Windows Update and try installing the update again.

  Method 2: Run the DISM tool

  1. Enter in the right edge of the screen and then click on search.
     (If you use a mouse, point to the lower right of the screen, move the mouse to the top and then click Find.)

  2. Enter command prompt in the search box.

  3. In the list of results, slide down on or right click command prompt, and then press or click Run as administrator.

  4. In the administrator: command prompt window, enter the following commands. Press ENTER after each command:

     DISM.exe / Online/Cleanup-image /Scanhealth

     DISM.exe / Online/Cleanup-image /Restorehealth

  5. To close the administrator: command prompt window, type Exit and press ENTER.

  6. Run Windows Update again.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.