Omni 10 camera - to begin, connect a camera!

Similar Questions

• Omni 10 camera

  Omni 10 camera does not work as it says that the camera is used by another application? any other apps do seem to be open or using a camera? is this a known issue?

  Hi ghbwegian, welcome to the Forums of HP. If your camera says that it is in use by another application, a program has seized control of it and do not let go. Try to restart your Tablet first and see if that fixes it.
  
  If this does not help, try to restore your WebCam drivers using this method:
  Using Recovery Manager to restore the software and drivers (Windows 8)
  
  If you are still having trouble, can you give us the exact model of your 10 Omni?
  Guide to finding your product number

• HP Omni 10 Webcam does not

  Hello

  I have a HP Omni 10 with Windows 8.1.  Recently, I discovered that my webcam does not work.  Whenever I press the camera application on the start menu, it gives me the message "to start, connect a camera."  I read a few solutions to go to Device Manager and uninstall and then reinstall the device, but I can't find the webcam in the Device Manager either.

  So I guess it has been uninstalled some how.  If this is the case, can someone please tell me how to reinstall, or if it is a totally different question?  Thank you!

  @KCPat - there are several possible reasons for the application of your Omni to camera does not, so perhaps more time than just 'fixing' to find the exact cause. On my own Omni (with devices of work) there's no driver with 'Caméra' in its name. However, when you scroll through the list of drivers, you may identify one or more marked as disabled. The list is presented initially with categories is collapsed, then look inside any category showing a minus sign (-) rather than a Plus (+) next to it. The task manager can also reveal some startup items that may be present but disabled.  Whenever you disable or re-enable the drivers or startup items, reboot your Tablet subsequently to ensure that Windows recognizes the change - even if you're not be prompted to restart via a pop - up.

  There are a lot of dependencies between the Windows operating system components, if precisely identify all tasks activated by individual components of Windows is "above the pay grade" for most of us - including the advisors 'useful' mucking-comments under the hood in a session remotely.  Keep a detailed list of all changes made to the settings the device or start during troubleshooting, so that you can restore them to their original state, later.

  If you get this far without getting your app camera work, the next likely step can be to choose the recovery options. The fastest option "Refresh" does not change your data, but still will require you to re - install extra software from 3rd - party that has not provided by HP or Microsoft. However, before proceeding with recovery options, I encourage you to check with HP technical support 1 & and/or update this thread with all the additional measures taken and your results...

  Good luck!

• OMNI 10 Miracast does not

  I like really the 10 OMNI.  It exceeded my expectations.  I have a question.  I can't make the project my 3000 PTV.  The PTV is on the latest firmware and I can connect through my laptop capable of WIDI for windows 7.  After you have added the ptv3000 using a device find it, it sits on the connection for wireless display.  The Omni is as it is connected but not display via the ptv.  I have a friend who also has a 10 Omni and it connects to my ptv with all the problems.  I think that this could be linked to an update of the BIOS that was pushed the site support a few hours a few weeks.  The day after I installed it, I noticed that the Miracast did not work.  So I went back on the support site and it was gone.  I guess HP accidentally updated BIOS available and he won.  I have no way to retreat to the original BIOS since I have done a system restore to try to resolve the problem.  He wiped the BIOS backup files.  Of course I did until I figured out that I had a BIOS problem.  The BIOS I'm on now is f.0Une.  Again, the update of the BIOS is available on the support site briefly.  Can someone send me original BIOS so I can fall.  I called the support already.  Lower level support people could not help me.  They it transmitted nationally and promised a call back.  Well it was more than a week.  I have not heard from them.  I even called and they assured me again that someone will call me... waiting.  I really don't want to return this machine because it works very well, with the exception of Miracast.

  Update.  My problem was quickly worked on by a representative of HP.  It turned out that the BIOS updated the question.  They sent me on a new tablet.  It works very well.  Thank you!

• series-usb lag with other usb devices

  I don't think that the title of this post fully captures the problem I am facing, then, let me explain a little more.  I'm trying to interface with a lot of devices in LabVIEW, two of my machines are built to order and use adapters of RS-422 to USB and another 4 devices are devices of BEDS that use USB.  So, all of my devices are connected to my computer via USB (via two 8-port external powered hubs).  I basically read data from my custom built devices, then using this data to control 4 devices for the use of cots.  My custom devices are running at 3.6 Mbit/s and reading data from them with nothing else connected works very well. The problems begin to occur when I begin connecting devices COTS.  I have connect and try to interface with them, I start having problems contacting my two custom devices.  Specifically, one or two devices from start to lift saturation errors until the data flows become unnecessary.  In addition, I also sometimes experience what is described as a ghost mouse problem.  My mouse starts moving and clicking on its own (opening programs, windows resizing, etc...).  I guess that's probably the USB driver listens outside.  The only way to stop it is to disconnect all the USB devices on the machine.

  Someone knows something like that before?  Can anyone suggest how disturbing these questions?  I'm kind of at a loss on what to do?

  I have no real information on your specific problems.  But, your computer will probably several USB controllers and you try to plug your controllers separate hubs to divide the load to the usb.  It might take a bit to search a manual or online to see which ports belong to which controller.

• How to write a pl/sql procedure that checks the remote db?

  Hi all
  
  I have one criticism PROD remote database I want to check every 10 minutes for its connectivity. If the connection fails then an email and a text Message is sent to me.
  My question is what is the best way to check if the remote database is running?
  
  Can I use sqlplus system/manager@PROD? But sometimes this has taken so long and suspended. I want the best response time?
  
  How can I write a pl/sql procedure control connection? What do something like the ff:
  
  I created a table for my tnsname.ora entries.
  

  cursor is c1 select dbname from tnsnames_tbl;
  begin
      connect system/[email protected];
      print c1.dbname || 'DB Connection OK';
      exception
         when others;
          print c1.dbname || 'DB Connection Not OK';
      end;
  end;

  Something like that?
  
  Thank you
  Kinz

  Not really feasible at the level of PL/SQL.

  The reason is that the greatest strength of TCP's robustness. TCP will try as hard as possible to succeed, before failing. It was designed to still work on the severely damaged or broken communication as a result of nuclear infrastructure. A TCP connection can take up to 15 minutes, maybe even more, before failing. It can be as slow as a turtle-, but he's wearing a hardshell. (unlike the UDP, which is the opposite)

  So if you want to test the TCP connectivity, you must design your own custom code to implement your assumptions about the latency of packets, earthquakes and drops and so on.

  Otherwise, you will need to use a standard TCP socket, set a time limit, try to login - and hope for the best.

  This approach, I have demonstrated in {message identifier: = 10111306}.

  If the TCP test works, it means that the listener is in place. Does not mean that the database itself is in place. Which means then using a database link to be tested. And this in turn can hang due to problems with archive record being stuck, not enough idle servers shared, etc..

• Need help with the compilation of PL/SQL procedure

  Hi people,
  
  Can someone help me with the following problem?
  
  Version: 10g Rel 2
  
  I create the following proc
  
  CREATE OR REPLACE PROCEDURE SYS. "P_SEND_MAIL"(p_message VARCHAR2).
  is
  Start
  UTL_MAIL. SEND ('[email protected]',
  message = > 'Oracle alert. "
  subject = > p_message);
  end;
  */*
  
  The above proc compile successfully
  
  Then I create a second proc that references the above proc
  
  CREATE OR REPLACE PROCEDURE SYSMAN. LOG_CRITICAL_ALERTS (gravity IN MGMT_NOTIFY_SEVERITY)
  IS
  BEGIN
  -Connect all the critical severities
  IF severity.severity_code in (MGMT_GLOBAL. G_SEVERITY_CRITICAL, MGMT_GLOBAL. G_SEVERITY_CRITICAL)
  THEN
  BEGIN
  SYSMAN.p_send_mail (Severity.message);
  EXCEPTION
  WHILE OTHERS
  THEN
  -If there is that no problem, then get the notification retried
  RAISE_APPLICATION_ERROR (-20000, "Please try again");
  END;
  COMMIT;
  END IF;
  END LOG_CRITICAL_ALERTS;
  */*
  
  I get the following compilation error
  
  SYSMAN PROCEDURE. LOG_CRITICAL_ALERTS
  Online: 8
  PLS-00201: identifier ' SYSMAN. P_SEND_MAIL' must be declared
  
  Thanks in advance
  
  rogers42

  One of the basic directions using Oracle, we should NOT, do not create your own procedures user SYS (or tables also). SYS is the datadictionary. That the datadictionary is changed automatically when importing, it is never exported: provided non-Oracle of objects are ignored.
  System: essentially the same question.

  Why you have this 'problem '.
  Just because you don't read the documentation and do not want to check for errors in the online documentation.

  Would you do that, you would have known
  SYSMAN would need to execute privilege
  You have put in place a public synonym.

  --------------
  Sybrand Bakker
  Senior Oracle DBA

• How to launch DBMS_SCHEDULER

  Hi most of my experience is with Oracle 9i, then I've never had the chance to use the Scheduler before. I created the following annexes, with the help of another website, but it doesn't seem to work. The calendar is broken down into 3 parts.
  
  -Part time hours - dbms_scheduler.create_schedule
  -Part of the program execution - dbms_scheduler.create_program
  -Use (conflation) part - dbms_scheduler.create_job

  begin
    -- run every hour, every day  
    dbms_scheduler.create_schedule(schedule_name   => 'INTERVAL_EVERY_HOUR',
                                   start_date      => trunc(sysdate) + 18 / 24,
                                   repeat_interval => 'freq=HOURLY;interval=1',
                                   comments        => 'Runtime: Every day every hour');
  end;
  
  begin
    -- Call a procedure of a database package  
    dbms_scheduler.create_program(program_name   => 'PROG_RUN_REQUISITION',
                                  program_type   => 'STORED_PROCEDURE',
                                  program_action => 'SchemaName.PackageName.Procedure_Requisitions',
                                  enabled        => true,
                                  comments       => 'Procedure to run requisitions');
  end;
  
  begin
    -- Connect both dbms_scheduler parts by creating the final job  
    dbms_scheduler.create_job(job_name      => 'JOB_RUN_REQUISITION',
                              program_name  => 'PROG_RUN_REQUISITION',
                              schedule_name => 'INTERVAL_EVERY_HOUR',
                              enabled       => true,
                              auto_drop     => false,
                              comments      => 'Job to run requisitions every 1 hour');
  end;

  If I run the program immediately, using the script below, he began successfully.

    
  begin
      dbms_scheduler.run_job('JOB_RUN_REQUISITION', TRUE);
    end;

  The question now is if I need to create the s section, regarding procedures and normal functions? Or should I save it to my existing package somehow? Or do I need to run a windows .bat file type (If Yes, advice on how such a file like bat would be appreciated).
  
  Published by: MikG on November 18, 2010 08:07

  It doesn't seem to work.

  Would it because your final job has no value for the START_DATE parameter?
  (Its default value is NULL)

  Or because the job is not enabled?
  http://www.Oracle-base.com/articles/10G/Scheduler10g.php#enable_disable_and_attributes
  http://download.Oracle.com/docs/CD/B19306_01/AppDev.102/b14258/d_sched.htm#i1012587

  You may also like to read:
  http://www.Oracle-base.com/articles/10G/Scheduler10g.php

• Implementation of Ldap errors - ORA-01400, ERR-10480

  Scott,
  
  I get this error when you try to implement Ldap in active directory.
  
  I use apex 3.2.0.00.27 and oracle database 10g Enterprise Edition Release 10.2.0.3.0
  
  
  ORA-01400: cannot insert NULL into ("APEX_030200". «WWV_FLOW_USER_ACCESS_LOG2$ '.» ("' SECURITY_GROUP_ID")
  ERR-10480 error cannot perform the function of verification of the authentication credentials.
  Ok
  
  
  Request 103 101 home edition page create Session activity Debug Hide Edit links see change it links
  Location: f? p = 103:101:189300501816980¬ification_msg =
  Invalid%20Login%20Credentials/4AA19826E86C3D0EE59CA6ED37F419D4/
  
  
  My plsql function tests fine in sql developer.
  
  
  I have read all the threads that I can find and I'm still not able to solve the problem
  
  Here's my function less sensitive data.
  
  create or replace
  FUNCTION ldap_auth (p_username in varchar2, p_password in varchar2) return a Boolean value
  is
  -Set Variables-
  l_ldap_host VARCHAR2 (512): = 'server ';
  l_ldap_port PLS_INTEGER: = 389;
  l_ldap_user VARCHAR2 (512): = "Cn = test_system, or = test accounts, dc is corp, dc = test, dc = com';"
  l_ldap_passwd VARCHAR2 (512): = "password";
  l_ldap_base VARCHAR2 (256): = 'dc = corp, dc = test, dc = com';
  l_filter VARCHAR2 (100): = 'cn =' | p_username;
  l_session DBMS_LDAP. SESSION;
  l_res DBMS_LDAP. MESSAGE;
  l_msg DBMS_LDAP. MESSAGE;
  instantaneous VARCHAR2 (1000);
  l_retval PLS_INTEGER;
  l_retval2 PLS_INTEGER;
  l_retval3 PLS_INTEGER;
  l_attr DBMS_LDAP.string_collection;
  BEGIN
  l_retval: = - 1;
  DBMS_LDAP.use_exception: = true;
  
  BEGIN
  -Connect to session-
  l_session: = DBMS_LDAP.init (l_ldap_host, l_ldap_port);
  -DBMS_OUTPUT.put_line (RPAD ('l_filter', 25, ' ') |) ': ' || l_filter);
  -DBMS_OUTPUT.put_line (RPAD ('ldap session', 25, ' ') |) ': '||
  -SUBSTR (l_session, 1, 16). -(renvoyées_par_init) ');
  -DBMS_OUTPUT.put_line (RPAD ('user', 25, ' ') |) ': ' || p_username);
  -Simple bind with service account
  l_retval2: = DBMS_LDAP.simple_bind_s (l_session, l_ldap_user, l_ldap_passwd);
  -DBMS_OUTPUT.put_line (RPAD ("S Binnd Simple", 25, ' ') |) ': ' || l_retval2);
  -Search
  l_retval: =.
  DBMS_LDAP.search_s (ld = > l_session,)
  Base = > l_ldap_base,
  SCOPE = > DBMS_LDAP.scope_subtree,
  filter = > l_filter,
  uploading = > l_attr,
  attronly = > 0,
  RES = > l_res
  );
  -DBMS_OUTPUT.put_line (RPAD ('return search_s', 25, ' ') |) ': '|| To_char (l_retval));
  -The county entered
  l_retval: = DBMS_LDAP.count_entries (l_session, l_res);
  -DBMS_OUTPUT.put_line (RPAD ("number of entries", 25,"'") | ': ' |) l_retval);
  -Made the first entry
  l_msg: = DBMS_LDAP.first_entry (l_session, l_res);
  -DBMS_OUTPUT.put_line (RPAD ('l_msg,' 25, ' ') |) ': ' || l_msg);
  -DBMS_OUTPUT.put_line (RPAD ('user', 25, ' ') |) ': ' || p_username);
  -Do Dn
  instantaneous: = DBMS_LDAP.get_dn (l_session, l_msg);
  -DBMS_OUTPUT.put_line (RPAD ('instantaneous', 25, ' ') |) ': ' || instantaneous);
  -Fact - unbind
  l_retval3: = DBMS_LDAP.unbind_s (l_session);
  RETURNS true;
  EXCEPTION
  WHILE OTHERS
  THEN
  l_retval3: = DBMS_LDAP.unbind_s (l_session);
  RETURNS false;
  END;
  EXCEPTION
  WHILE OTHERS
  THEN
  RETURNS false;
  END ldap_auth;
  
  
  
  On the login processing screen I have following information
  
  LDAP host: Server
  LDAP port: 389
  
  LDAP dn string: % LDAP_USER %
  LDAP username change function: return ldap_auth;
  
  
  I also try to use access control, which worked correctly with the authentication request.
  
  
  Any help would be appreciated.

  It seems that your authentication below is the full agreement. Why not take the ldap information as it is and only have the function with the parameter authentication scheme:

  Authentication:
  return ldap_auth

• Compaq Presario desktop XP-problems connecting / came with the settings and files of the previous owner

  My Director ex-chorale of the Church and his wife (was his computer) moved to Minnesota and gave me this Compaq Tower and the monitor speakers.  She cleaned me all of hers off the coast.  Well, she didn't.  She switched to the network connection and modem.  I'm low on memory.  Help support & the beginning, Compaq support and connections says "unable to connect to the server."  I have fast Internet with Comcast cable.  His modem is Gegere or something and the network connection is RealTek 97 Fast family and mine is Arris (modem).  Specifications of the computer:

  XP Edition family c. 2002 SP3

  Compaq Presario Intel inside Celeron (R)

  CPU 2.53 GHz

  248 MB of RAM

  CD player works but the DVD player does not open.  Connection is so slow that it takes 5-10 minutes to open anything.  IE8 gets constantly "stops responding."  Just like Firefox.  When you try to close a window or stop start, end the program box comes back and comes back again and again.

  Went to start-help & support-Compaq help and did some tests.  For Audio, etc. get: "Exception in DisplayRunMap.runmap.

  Only had this computer for 2 weeks and did nothing to save.  Can reinstall Norton Security Suite for Comcast and my Microsoft Professional 2007 from a cd.  Thought to do the system recovery.  This OS came with Compaq and recovery CD system recovery option and there is F - 10 System Recovery on initialize toward the top.  Are they the same?  I first have to install Windows XP on a bunch of CD?  Can't make a DVD if the drive does not open.  The button is loose and nothing happens.

  I am 63 and security social disability so can not afford a new computer, or to hire a technician.  Help, please!

  When you request support, please provide the number full name or product model of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The above requested information on the side, back, or bottom of your computer. , Please do not include your serial number.

  The 'F10' and Compaq system recovery of Windows XP system recovery are the same thing. You don't need to create "HP recovery discs" before making a recovery, but you may need these disks at a later date. If a set of disks has already been created, you will not be able to create a second series and you may need to buy a game from a third-party vendor.  With the complete model number name and/or product will allow us to direct you to a place to buy these records, if necessary.

  Please click the White Star of KUDOS to show your appreciation

• Omni 10 front face camera missing in camera app icon

  Hi all
  My front facing camera on my Omni 10, 64 is not available to choose from the app.
  I called and they helped me. I actually could see the icon specified in the camera to switch application and it worked perfectly for a week. It has now disappeared again.
  Support has remove me the current driver for the camera, and then restart your computer. When I did, the driver had re-installed itself and everything was great.
  Now, my problem is it stopped working again, and I don't know which driver I deleted. When in Device Manager, I can't understand which section it was or what it was called. the Lady helping me tried several things until we arrived at this, then it worked, but there were too many other things going on for me to remind and I thought that it was fixed to permenantly so I don't have a note or a page first.
  Any ideas? I really want to remember and go
  the process of elimination to new lol

  I had to spend my Tablet 10 Omni at my desk after that - the pop ups blocked much too much of the screen.  This may be posted elsewhere, I don't know.  But that is a different problem.

  Mods if you see a similar message by me, Ron7624, remove it.

  I finally remember that the only thing I have to do is wide upward from the lower right, then opens a small panel which is connected to the camera, change the camera button, a timer and an element of control of the exhibition

  So there is nothing wrong, just me not to remember this little trick.

  Thank you for your offer to help!

• Cannot connect camera Canon Rebel for Windows 7

  I got a Canon Rebel camera with a large memory chip. My old printer had a port for the chip but my other does not work.  When I connect my camera directly on my computer Windows 7, I get "Canon camera has not a driver", nor can it find a driver on the web. I know I downloaded the images from this camera before.   How ca I download the images?

  Wednesday, October 3, 2012 20:56:59 + 0000, richardsloat wrote:

  I got a Canon Rebel camera with a large memory chip. My old printer had a port for the chip but my other does not work.  When I connect my camera directly on my computer Windows 7, I get "Canon camera has not a driver", nor can it find a driver on the web. I know I downloaded the images from this camera before.   How ca I download the images?

  You can buy a USB memory card reader very little expense. TO
  Amazon.com, they begin to 1.46 USD.

  I always prefer using such a reader, rather than connect the camera.
  The drive uses no battery in the camera and it's quick and easy to
  use.

  I have two of these drives. An I keep on my desk, one in my
  Bag for laptop to use when traveling.

  Ken Blake, Microsoft MVP

• Firefox won't let me connect to the Dlink page where I can use prior settings for my camera dlink

  This is the response I get from Firefox. DLink says that the problem is not with their page. I can't give you a link to the page because all I have is a tab on my camera software and cannot access the page to see the address. Dlink said there should be an option to continue however, but Firefox does not provide this option.

  Unable to connect safely

  Firefox cannot guarantee the security of your data on 192.168.1.113, because it uses SSLv3, a broken security protocol.
  Advanced information: ssl_error_no_cypher_overlap

  If you click on the details of this page, so that there should be a drop down add the exception:

  • Secure Web site certificate
  • What do the SSLv3 on Firefox error messages mean?

  SSL3 blocking deactivation is not recommended or secure. If you go to about: config and search for ssl3 and ensure that all are true, this will change that. IF you can't find what specific encryption is used in the cert, you can choose one of those appearing in the the purpose: config page.

• Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.

  Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.

  Try using using the Image Capture (in the Applications folder)?

• Connect iPad Pro 12.9 "on PC 3 USB port using the new USB 3 iPad camera connection kit

  Hello. I would like to connect my iPad Pro 12.9 "to my PC using the speed of the USB 3 port of lightning of the iPad for faster synchronization with back ups. I bought the new camera USB 3 connection and A kit to A 3 USB cable, put everything together and down to iTunes, but it does not recognize the iPad. Has anyone tried this before?

  You don't need the Camera Connection Kit for this. Connect your iPad to your PC using the lightning to the USB cable supplied with the iPad.