on homescreen and helmet

Similar Questions

• Satellite P100 (PSPAAE) - SPDIF and helmet is the only audio options

  Interface SPDIF and the helmet is the only options for audio output, if the SPDIF of my sound card? Speakers work when using the webcam, but not now it are disconnected?

  Hi vickylou001,

  Probably, you need to reinstall the audio driver. It might be something wrong with the audio output of the audio driver settings. In order to check the Web from Toshiba site to download the audio driver and reinstall.

  By the way: what OS do you have?

  Did you notice the same problems before installing Logitech webcam software?

• Sound does not automatically pass between speakes and helmet.

  Separated from this thread.

  Hello

  Thanks for the reply.

  Please provide the following information.

  (1) what is the brand and model of your computer?

  (2) what you earn when you say "Connect the 3.5 mm plug to the mobo"?

  (3) have tried to turn the headset as default device to check the question?

  I suggest you to follow the steps below and check if it helps.

  (a) right click on the volume icon.

  (b) click on the peripheralof the reading .

  (c) right click on the device that has been set as default and click Properties.

  (d) click the last tab Advanced Options.

  (e) under the Exclusive mode you will see two boxes to check, uncheck the two of them.

  Check if it helps, if you still face the problem, follow the steps one), b), c), d) and click on the restore defaultoption.

  It will be useful.

  Hello Dominique and everyone!

  I have exactly the same problem as the creator of this thread: audio only plays the default device and my system does not switch whenever I say - / my headset.

  I had this problem before, but fixed it somehow. He appeared once again, recently, I think that after installing the latest nVidia drivers, where I forgot to uncheck installing the audio drivers.

  (Steps of Pranav one) through e) unfortunately did not turn.

  Here's a description of my system:

  • I use the Realtek card my motherboard ASRock Z87 Extreme4 Board
  • I use the speakers built-in monitor, connected on the rear plug of the PC with a 3.5 mm jack plug
  • The monitor is connected via Displayport
  • I connect my helmet on the front panel, also with a 3.5 mm jack plug

  Realtek HD Audio Manager detects connections:

  

  Currently, the headphones play audio, since they are selected as audio device by default:

  

  Now, when I disconnect the headset, I want my monitor to continue playback automatically.

  And when I plug the headphones in, I want to play again. I know that it is possible to configure the system like that, since I already had on before. I don't know how to go back again!

  Can someone help me with this? Would be really great, because I'm crazy about this since I'm regularly pass the monitor with headphones. :)

  Here are some more screenshots to illustrate:

  Properties of the device "speakers:

  

  Here the tab advanced discussed:

  

  Completion, the recording devices, since some other forums suggest to change the settings, but nothing helped for me:

  

  And, as an option in the Realtek HD Audio Manager software. Unfortunately, this change also did not help, I think:

  

  Oh, and I just noticed that the display device is actually connected via"digital HDMI" via the Displayport cable, I guess that:

  

  Really don't know what to do with all this... Help, please! :)

  Any help is greatly appreciated and even if you do not answer, thank you for your interest!

  Best regards

  arbine

  Hello

  Please write to us about Microsoft Community Forums.

  Have you tried to uninstall completely the Audio device drivers and then reinstall them using?

  This problem can occur if the drivers already installed for the device are corrupt. To resolve this problem, you will need to completely uninstall the driver/device and then reinstall it.

  Please, try the steps to uninstall the device Audio Device Manager, uninstall the drivers of device from the list of programs, and then download the latest drivers from the manufacturer's website.

  Step 1:

  Uninstall the device from Device Manager

  • Open the Device Manager
  • Expand the section of its adapter .
  • Find the Card Driver.
  • Right-click to map its Driver and choose Uninstall.
  • Select the check box delete the driver for this device.
  • Restart the computer after the uninstall is complete.

  Step 2:

  Uninstall the drivers of device from the list of programs in the control panel

  • Click Start, select Control Panel
  • Now, click on programs and select programs and features.
  • Find the Card Driver.
  • Right-click to map its Driver and select Uninstall.
  • Restart the computer after the uninstall is complete.

  Step 3:

  Download and install the latest drivers for the sound card on the manufacturer's Web site

  Here is the link to download the latest drivers.

  http://www.Realtek.com.tw/downloads/

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• Matching and stack of updates

  I have a Portege R100 with card SD3. Most of the time things work OK, but from time to time I lose connectivity and I have problems of reconnection. When I try to connect, BT cannot find the device and if I try to repeat the pairing does not recognize a new device. I always liked the intermittent problems!
  Strategies to improve your chances of success?
  Polarity of the antenna do a lot and, if so, how best to align the devices?

  The problem at the moment is my Philips BVOX headset, but I had the same problem in the past with my cell phone from Sony and my MS. mouse

  Second question concerns the updates of the battery. Since these updates are not pushed to the computer via Windows Update or Toshiba Software Update, is there a mailing list or something like that I can subscribe to so I am notified when a new battery is available?

  Hello

  I have very good experiences with BT and helmet use with Skype. Philips BVOX does not know to me but please check the Toshiba BT page under http://aps.toshiba-tro.de/bluetooth/ especially the FAQ section.

  You will find the article that maybe can help you.

  Good luck!

• What is the next update? homescreen + lockscreen etc.

  When will the next update which adds bean frozen lock screen.

  jelly bean homescreen

  and all the other missing features?

  Also we have key lime pie because if won't them I never forgive Sony.

  Jelly bean has been promised in the first place much earlier, but took 7 months

  and all that we got atm is fix for random closures with old homescreen old lockscreen and missing features jelly bean.

  Lag has't been completely fixed or even harder perhaps it is because old homescreen and lockscreen.

  personally, I don't care if sony that is not an excuse for not updating for example to the devil 5.0 the reason why I wait for her.

  This also the reason why I started petition that Sony has neglected updates way well last a few years remaining ignorant towards bugs.

  since 5.0 could be announced very soon I'll be less expected asswell 5.0 for ages 1 years and xperia s tablet devices.

  I also expect small updates like 4.1.1 staring at stuff like stops random or recharge in the future as their still some other bugs a few new bugs to be fixed.

  may be new bugs to future I accept it, but I expect sony to fix it to.

  Nothing can be free of bug but amount bugs on device sony android is much and boring.

  
  

• Laptop HP shows ' speakers and the headphones ' as a healthy option

  I recently got a new computer hp laptop.

  When I plugged my headphones in, sound still came through the speakers. I looked in the sound menu, and it was classified as two options "Speakers and headphones" and "helmet of Communications." I could hear my voice to friends with Skype on the headphones, but my ingame (Star Trek Online) sounds came again through the laptop speakers. Does anyone know how I can make my headphones and speakers separate options?

  I guess your headphones have a microphone built in, as they appear as a communication device.

  -Just cut the speakers, keep the helmet on.

  

  OR,

  -Set the speakers and headphones as the default communication device.

  

  Post back and let us know if this helped.

• Windows 7 Audio problem IDT plays through speakers and headphones

  I recently took possession of old Windows 7 Dell Inspiron N5040 my brother who runs the audio driver IDT HD Audio, the problem is that even when headphones are plugged in, the computer still plays sound on the speakers, I tried to uninstall and reinstall the driver, update the driver software and I still cannot fix. I thought that maybe the problem could be fixed with sound in the Control Panel, however, I can't find the device labeled "Headphones", only two devices listed are "Speakers/headphones" and "helmet of Communications." How can I do so that the system only plays sound through speakers when the headphone is not plugged and only plays the sound through the headphones when they are?

  Hello

  Please contact Microsoft Community.

  I understand that you are unable to play music through the headset and it still plays sound to speakers.

  To better understand the issue, please send us the following information:

  1. This headset works with other computers?
  2. Have you tried to use other headphones? The problem persists?
  3. Are you facing this problem with a particular application or does with all applications of music?

  I suggest you follow the steps described in the article below and see if it works:

  Open the hardware and devices Troubleshooter

  Tips for solving common audio problems

  You can also check the suggestions provided by Aziz N December 13, 2011 and the Mike991 , February 12, 2012 in the article below:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/sound-playing-through-Laptop-speakers-even-when/07289d2c-BF3B-4395-9c6f-dfe0c5151821

  Hope this helps, get back to us if you need further assistance for Windows.

• Toggle to screen of blackBerry Smartphones between the clock and the home screen

  Hello

  When I connect my "BOLD" to my computer via USB, the computer detects quickly and then disconnects (BB screen switches between charge/clock display and the bb homescreen) and this repeats until I have unplug it.  In addition, he was never able to connect via bluetooth, even if I have another phone and mouse that are bluetooth, who have never had a problem - the one with a similar prob?

  Hey Jmrmb80, you will never believe this - cord USB I used was the question!  I looked at the gauge/side printed on the stock power cord and it matched that of the cord I was using, so I thought that there should not be a difference (even thought the stock of bb usb wire is thicker) but when I went to the line stock everything was fine.  No more probs

• BlackBerry smartphones HELP! I lost all my application icons and the menu button does not work!

  I don't know what I did.  All the application icons are moved from the home page.   The menu button does nothing. The trackball does not have anthing. The only thing on the screen is the time, date, battery, new mail envelope, signal and volume. I pulled the battery and it has no effect. I don't know what to do. Help!

  Hey, JSammy.  I had mine works again with the help of someone from another site.  Here's what you need to do: press the green call button, then the menu button.  Select options, then on options General, highlight "dial from homescreen" and the value. Save and exit. Now on your home screen, press "O".  After that, the General menu options will come.  Choose the option 'theme' and choose a different theme or return to the default value.  This should be all your application icons to reappear.  After doing all this make sure you go back to reset the "dial" since the homescreen on 'yes '.  I hope it works for you.

• Where are Contacts and Apps?

  It's the strangest thing - I downloaded a few apps and I can't find them on the phone.

  I added three new contacts and they are not in the list of contacts. I do a search for them.

  What gives?

  If the applications you have installed were the widgets that you will see in the app drawer.  How to you put a widget on the home screen and hold is on the homescreen and Widgets and select in the context menu.  You can now select the widget you want in the menu "select widget.  One thing to remember about widgets is that you must have enough space on the home screen for him.  If the widget is a widget of 1 x 4 this means that you have 4 empty spaces horizontally on the home screen so that it can be added.

  Regarding your contacts, open the Contacts application.  Now press Menu-> view-> your Gmail options account-> contacts-> fact.  This should make the phone show all contacts that are on the phone.  After you hit is now scroll through your contacts and see if your 'missing' contacts are listed.

  I hope this helps.

• Sierra upgrade - NO speaker sound

  After upgrading my MacBook Pro [13'3 inches, mid-2012] of El Capitan for Sierra my internal speakers stoped working and helmets as well listening. The only way I can use the sound is through Apple TV...

  Reinstalled Sierra, ran disk utility, checked his settings, rebooted the computer several times but nothing have solved the problem. Help, please!

  Try resetting the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

• headphone 3.5 mm jack does not properly after update iOS10

  Headphone Jack is not working properly since I have updated to iOS 10, now on 10.0.2, before you start, I would say that my headphones work perfectly, I tried on other equipment, including my old ipod.

  So, here's what happened, whenever I plugged and you try to play a song on music or a video on youtube, I could not get any audio, restart the phone partially solve the problem, I managed to play ringtones in the settings menu without any problem, on both my headphones and loudspeaker at the same time , which I don't know if it is planned, I think it must have something to do with some bugs in iOS 10?

  someone at - it a similar experience or a solution?

  Hi oramicle,

  On the device that you have a problem? I also have this problem on the iphone 6 s. On two different helmets. It's certainly iOS 10.x, because I don't have this problem on the same device and helmet on iOS 9.x. I sent the bug report to Apple with this description:

  After some headphone output (jack 3, 5mm) at the moment does not work on iphone 6s 128GB, iOS 10.0.1 and 10.0.2 - no sound from the headset. Volume controls and MIC still works. When I make a call with the headset plugged and tapping on the microphone, I hear sound for headphone listening, but the others its not. No noise in other applications. Restart the temporary fix of the device this problem.

• Portege M600 - backlight switch location

  The screen backlight is off and turns away. I can see the laptop when he ordered following a 2nd. I can very faintly see the desktop on the laptop screen - except that it's dark. I tried all the fixes software I can find in this forum, but nothing works.

  A suggestion I found that the switch that disables the display when the lid is closed is stuck in the closed position. It makes sense, but how do I find this switch.

  If it is incorporated into the display panel hinge?

  > I can very faintly see the desktop on the screen of the laptop...
  Have you noticed that from the moment you place the laptop (Toshiba homescreen) AND the BIOS settings?
  I can't say for sure but I m afraid described problem has nothing to do with the software but with FL inverter. FL inverter may be defective and must be replaced.

• IPhone s 6 & 6 s more

  Hi people,

  I'm new to apple products. Now I have an iphone 6 s & s 6 more. My 6 s I can't rotate the homescreen and some other applications such as health, AppStore etc... landscape mode? But in my 6s over phone I can turn. I've read a few articles and said that because of the size of scree 6s cannot do that, I just want to know, is that true or my 6s fails?

  Thnks

  Have you checked to see if your screen on the 6s is locked?

  Slide up from the bottom of the screen and call the control center

  The switch to lock looks like a padlock with a circle around it - if it is enabled, it will show in the list of icons at the top right of the screen

• AD2P Drop Outs when you use the mouse BT

  Hello

  Someone else had this problem? Tecra M4 with Builtin BT 2.0 + EDR radio, Windows XP SP2, any version of BT stack of v4.00.23 from... currently on v5.10.01.

  With the help of the mouse BT (IOGear GME225B - http://www.iogear.com/main.php?loc=product&Item=GME225B) works very well.

  Using headphones AD2P (Anycom BSH-100 - http://www.anycom.com/products/bluetooth_audio_video/anycom_stereo_headset_bsh_100/?id=102&partno=CC3300) also works very well.

  If I try to use them as well at the same time the mouse is very insensitive or the sound in the headphones down a lot. In later versions of the battery BT things seem to be a little better... but not much.

  Does not seem to matter if my WI - FI radio is on/in-use or not... tried both thinking that may be the issue.

  I think that I read somewhere that one of these devices is one master of BT, the other slave BT... and try to use them both at the same time is causing issues for radio and or BT stack to switch back and forth between the two modes. Is this correct?

  I thought that perhaps a BT mouse and/or helmet AD2P which was BT compatible 2.0 could help... but not been able to find one... would it? Any recommendations?

  Thank you

  This depends on the version of your mouse Bluetooth equipment and helmet, they are probably older. The book BT module is updated and should work fine. Some helmets also have a poor hardware Protocol so several communication connection can cause problems with the quality of service.

  Master-slave switching should not happen in this combination, but if so, then it happens only once and should be no problem more.
  You can try to lower the quality of the sound of the headphones in Bluetooth settings in the "details".
  This will probably improve the behavior described.