On Microsoft XP Stop error

Similar Questions

• Microsoft Windows stop error code 12

  Hi, I keep getting this error with windows code 7 can any one explane what is it please

  The problem is the firmware / BIOS.

  From: "Firmware Corruption of memory during sleep Transitions.

  Windows 7 and Windows Server 2008 R2 checksum automatically the content of low physical memory 1 MB before and after a transition of sleep. This checksum process allows Windows to detect memory corruption and report any corruption as an error in the system event log. In the event of corruption of memory in the lowest 1 MB of physical memory during a transition of sleep, hardware application logs event ID layer (HAL) 12 in the case where Viewer

  ...

  Troubleshooting steps

  Manufacturers of systems or firmware developers must investigate and resolve corruption through a transition of sleep. In many cases, the resolution of the problem requires an update to the newest BIOS for the platform.

  The resolution must take the form of an update of the BIOS.  If there is no BIOS that does not cause in the above message, pester system manufacturer or motherboard manufacturer or the source of the BIOS on the problem.

• Microsoft automated troubleshooting error attached start-up services has stopped working

  I would like someone from Microsoft to please solve this problem once and for all:

  "microsoft automated troubleshooting error attached start-up services has stopped working.

  I tried the fix and nothing works... Please help

  Hello

  Have you tried the steps in the Microsoft article that was provided in the previous post?

  Please meet us, so that we can assure you that the problem has been resolved or not.

  For more information, see this article: http://support.microsoft.com/kb/555375

• Satellite A100 - recovery will not be finished and stop error message occurs

  Satellite A100-S2211TD, OS is Windows XP Home Edition of recovery disk,

  I have updated the BIOS to 2.20 and laptop was working fine. The old installation of Windows factory has worked well.
  After a few weeks, I tried to use the recovery disk to remove the noise from the HARD drive.
  The recovery of disk task completed and the computer restarted.
  I got the stop error message
  STOP: 0x0000007B (0xFA335528, 0xC0000034, 0x00000000, 0x00000000)
  I removed the memory that I have entered over the past two years and return the PC in the factory scene.
  However, recovery will not be finished (he worked to restore).

  I am able to boot in dos with a separate boot disk (Dr. back, windows does not start, not even in the safe control mode) and I did chdsk of the disc and disc is fine.

  I've never used before recovery disc, the only thing different is BIOS 2.20 instead of 1.50.
  WEB of TOSHIBA said that if you upgrade the BIOS most 2.00 you can not return to 1. XX

  Thank you
  g

  Hello

  The A100-S2211TD doesn t support the Intel Chipset!
  This laptop was equipped with the ATI graphics card and the graphics driver on the Toshiba page contains us the graphics driver and chipset driver!

  Have you received 100% good recovery CD?

  In your case I would try to install Win XP from the Microsoft CD to check if the same error would appear if no drivers are included in the CD of the OS.

  Check it out

• Stop error 0x0000007e (0xC000001D, 0 x 80537008, 0xF7A2B3B8, QxF7A2B0B4)

  I got the following Stop error 0x0000007e (0xC000001D, 0 x 80537008, 0xF7A2B3B8, QxF7A2B0B4) after installing an update and restart the computer. Check out all the options does not work IE Mode without failure. Would not access the system restore either. 1 update installed on 2010-02-17. I don't remember the name.

  CrystalBall © SEZ...

  See http://blogs.technet.com/msrc/archive/2010/02/17/update-restart-issues-after-installing-ms10-015-and-the-alureon-rootkit.aspx ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Blue screen with STOP error 0x0000007B (0xBA4CF524, 0xC0000034, 0x00000000, 0x00000000)

  I have my Acer 5920 laptop, 2 GB of RAM and 160 hard drive, last stop system time correctly with all the files to day, but when I restart then comes windows XP Jean-Christophe and then a blue screen with the error. Nor I have install new software or remove something in the laptop. My system was perfect, and that was before the last stop.
  I have Windows XP SP2-teacher-pack. I have the original CD of this package.
  But when I use the CD then nothing is happen and come same messgae of error. I do not have any other CD bootable for windowXP except your originalCD.
  Please suggest me what I should do to fix my probem. I'm not to much expert for the formatting and other things computer.

  After reading your following suggession:
  Here are a few things to try:
  The first thing to do is to boot your system and start pressing F8 as soon as it starts booting.  You will get the Windows startup options screen.  Select "Disable automatic restart in the event of system failure" and let it restart.  When it starts, it can now stop with an error screen and give an error message and code.

  Disconnect all external devices (printers, USB Hub, drives external, etc.) and try to start.

  I got the result of the error that comes on a blue screen after you follow your process-blue screen with STOP error 0x0000007B (0xBA4CF524, 0xC0000034, 0x00000000, 0x00000000)

  Thanks in advance for help
  What about nice Rajneesh

  Just one quick response for others...

  Go to your bios to change the mode of training of your s - ata AHCI or IDE Compatible mode or all that apply :) Windows XP is not like SATA, because it has no native support for it. At the start of the second phase of a Setup program, it would fail with this BSOD.

  Also read the following Microsoft article that describes many other causes (including file system damage):Troubleshooting of errors "Stop 0x0000007B" in Windows XP Advanced

  Sometimes, your BIOS will provide its default settings after a system crash or a configuration. Should not happen, but it is...

  For BIOS-discussions, see: 0x0000007B 0xBA4cf524 - Forum of Support PC - Free Computer help , XP installation: * STOP: 0x0000007B (0xF78D2524, 0xC0000034, 0x00000000, 0x00000000)? - Page 4 - Cyber Tech Help Support Forums , 0x0000007B (0xBA4CF524 - Google zoeken .)

  Have fun, and... Peace!

  Devvie

  ~ ~ ~ * E-mail address is removed from the privacy * ~ ~ ~

  CONARE nullius momenti videri fortasse missilibus careant
  ------
  All the spelling mistakes are my own and may not be distributed under the GNU General Public License! -(© 95 1 by Coredump; 2-10 by DevNullius)

• "Stop error" suspected to cause driver corrupted for user installed DVD burner.

  I get a "BSOD" (blue screen of death) everytime I go out with my Philips DVD burner. Under XP Home on a Dell Dimension 2400. Installed this writer a couple of years ago and have used it without any problems, however started getting this error about 6 months ago. MS produced a report when I rebooted after the last incident - "you received this message because a device installed on your Windows computer driver stop unexpectedly." This type of error is referred to as a "stop error" that requires you to restart your computer. "I followed all the steps described in this report to address the cause of the erroor. However, one of the steps refers to "Uninstalling the driver", but it is a step of manned by menu windows which seems to me that it's not really uninstall the driver - it's just a procedure they wrote such fact, it (start - control panel - display categories - Perf. & Maint - system - hardware - device Mgr - disabling/uninstalling). After you follow these steps, you get a message from re - install the device by clicking on a box. In my view, the same driver is used. It is corrupt nothing has changed and I will continue to get this error. I would like to know where the real driver is located so I can delete it and then go online to download a new driver. However, because my o/s came pre-installed by Dell, MS isn't going to help (unless I pay for the help) and Dell won't help because they didn't install the unit and the Philips site is useless in trying to get technical information as to where their driver is on my hard drive. I checked Event Viewer - System Log and found 'Source = system error category' and the real codes of 4 parameters (addresses memory I think) [that MS would only be able to interpret] for this date and time. I might have to go the route of 'pay' people with MS, but before doing that I would try to fix it myself. Dell site will not download the driver that already exists on my HD and is the latest version. Tools Dell system does not include this unit in its analysis of material either. So - I hope that someone will be quite kind to give me any suggestions where to find this particular driver - I can't find anything that looks like a pilot in the Philips records. Thanks for any help offered too!

  Hello
   
  (1) what is the complete stop of exact\ error you get?
  (2) what you mean exactly by I get error on a blue screen when you quit using my Philips DVD burner?
  (3) burner DVD from Philips, you have, it's an internal or external DVD burner?
   
  See the methods mentioned below and check if that helps
   
  Method 1:
  How to solve problems of hardware and software drivers Windows XP
  http://support.Microsoft.com/kb/322205
   
  Method 2:
  Try to uninstall and reinstall the drivers
  Follow the steps mentioned below and check if that helps.
  (a) click Start, click run, type devmgmt.msc
  (b) expand CD-ROM/DVD-Rom drives.
  (c) make a right click on the Dvd drive and click on Uninstall.
  (d) restart the computer.
   
  Method 3:
  Try to download the drivers from the following Dell Web site and check if it helps.
  (a) click on the link below
  http://www.Dell.com/support/drivers/us/en/19/DriversHome/NeedProductSelection
   
  (b) select to choose from a list of all products Dell, click on desktop computers.
  (c) click the Dimension, and then select the model as a Dimension 2400 number                            
  (d) if the Philips Dvd burner is an external tries to download the firmware under removable storage called Philips in the above mentioned link.
   
  Hope this information helps.

• Windows XP Stop error, blue screen.

  Hello moderators,

  I am running Windows XP SP3. My Info system is as follows:-

  Name of the operating system Microsoft Windows XP Professional
  Version 5.1.2600 Service Pack 3 Build 2600
  Manufacturer of operating system Microsoft Corporation
  System name USER-364DED4B8D
  System manufacturer MSI
  System model MS-7597
  System Type X 86-based PC
  Processor x 86 family 16 model 5 Stepping 3 Mhz-AuthenticAMD ~ 3013
  BIOS Version/Date American Megatrends Inc. V10.2, 14/03/2011
  SMBIOS 2.5 version
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume3
  The local United States
  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  User name USER-364DED4B8D\user
  HIS Western time zone standard time
  Total physical memory 096,00 MB 4
  2.28 GB available physical memory
  Total virtual memory 2.00 GB
  Available virtual memory 1.96 GB
  Page file space 4.81 GB
  Paging file C:\pagefile.sys

  I was playing music on Windows Media Player. Visualizations was running. When all of a sudden system crashed "Stop error". I restarted the system and received the error message. The details are as follows: -.

  BCCode: 1000008e BCP1:c0000005 BCP2: B3E96EZ56E25 BCP3: B27DE118 BCP4: 00000000

  BONE, 51_2600 SP3_0 worm produces 256_1

  I checked the system tools and looked into the system the only thing I could find was a warning that my web cam created an error about 2-3 days before today.

  A further check revealed that the webcam and its software was not spent by the Microsoft Logo and was therefore inconsistent to run under XP.

  I have experienced this type of problem before crash and recently did a clean install of the operating system. I'm afraid that if I folds music or run that DVD system stops again.

  What can I do to prevent it happening again.

  I will be grateful for any assistance to resolve the problem.

  Thanking you.

  standeb.

  http://xpdrivers.com/hardware/cameras/resolving-Webcam-driver-issues-for-Windows-XP/

  read this.

  If it corrects the problem return post, otherwise it would be logical to uninstall the software from your webcam and then see if the error occurs again all while listening to music and watching visualizations.

  post results back please.

• Blue screen of death: stop error: 0X000000CE

  Hi, I think I got a bad virus on my computer that's all waste.  First of all, it all started when I clicked on a link, while the Christmas on Black Friday shopping. Then I got a download of unwanted software, called system difficulty, (the small icon of Windows) I could not use system restore to remove, whenever I tried to use it, it says cannot restore on this point. Tried several other points, but no joy. Can I get the dreaded blue screen of death with a stop error: 0x0000008e (0xc0000005, 0x804f8e80, 0xef76aa98, 0x00000000). Could sail in safe mode and tried to fix it with antivirus software, found 26, abducted, ran spybot search and destroy, found nothing. Still no joy. So today, I tried to start in safe mode, and it does not work in safe mode, guard reboot again and again. Then I hit F8 and turned restart turned off so I could see the Blue error screen that would flash for just a second, and now I have this stop error message: 0x000000ce (0xf88be6dc, 0 x 00000000, 0 x 00000000, 0xf88be6dc). I read forums on video and all drivers, but this happened just after I clicked on this link and got the virus with this unwanted software download. Anyone got any suggestions on how to solve this problem? Oh and I downloaded a program called error repair of my other computer and installed but it only scan my computer to find errors and then he wants to buy you the pack premium, so that did not help. It's my computer business running windows xp pro service pack 3. Wish it would have been on this cause she has the system recovery and it worked whenever I had a virus, I couldn't get rid of that. Thank you, Steve

  JoseIbarra is the expert resident on the Recovery Console and chkdsk/r. I'll track down his instructions. If the malware is responsible for the BSOD, I do not think that chkdsk /r will help, but it won't hurt. Or you might need to repair your boot.ini file.

  DEFINITELY get this brand XP reinstallation CD Dell! You can use it to perform a clean installation of XP or a repair installation of XP (chances are, you won't ever need to perform a repair installation, but it is nice to have this option) or to enter the Recovery Console to perform functions such as chkdsk/r.
  Chances are that your data does not fit on one CD! Depending on what you have, you might need to up to 100 CDs or more! Better to buy an external hard drive. Newegg.com has a very good selection of the most affordable. Here is an example:
  http://www.Newegg.com/product/product.aspx?item=N82E16822148409
  Creating a Ubuntu CD bootable 'live' (and then startup out of it, rather than on your hard drive) will allow you to copy your data to the external hard drive:
  https://help.Ubuntu.com/community/LiveCD
  There are also some other CD bootable antivirus (like Avira) which may help you:
  http://www.livecdlist.com/purpose/Windows-antivirus
  Here is a link to the instructions of Jose:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/unmountable-boot-volume-stop-0x0000000ed/570c7f90-5869-E011-8dfc-68b599b31bf5

• I put the machine into hibernation and when I restarted, I got a blue screen with stop: 0 x 00000024. Restart gave a different stop error message: 0 x 00000050.

  Original title: Blue screen problems - Stop 0 x 24 and 0 x 50

  I'm not being updated hardware or software on my Dell Latitude D8380.

  I ran the Windows tool to check if the laptop is suitable for upgrading to Windows 7, but did not install any software.

  I put the machine into hibernation and when I restarted, I got a blue screen with stop: 0 x 00000024 (0x001902fe, oxba4f7948, 0xba4f7644, 0xb9d31ae8) ntfs.sys address b9d31ae8 base at bpcef000, datestamp h8025be5.

  Restart gave a different stop error message: 0 x 00000050(0xffffffff,0x00000000,0xba1bef42,0x00000000) i8042prt.sys address ba1bef42 base at ba1b8000, date stamp 48025c 67.

  Please can you help. Thank you, Sue Dixon

  Hello

  Step 1: Check if you are able to boot in safe mode. If you are able to boot into safe mode, and then try to perform the clean boot to safe mode and check.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Run the check disk hard disk command. (You will be able to try this step if you are able to start in safe mode or in normal mode with success)

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Let us know the status of the issue.

• Get a stop error in Windows XP, every time I shutdown

  Title: Stop error in Windows XP Home
  I have the following error popping up whenever I stop this machine.

  fltMgr.sys

  PAGE_FAULT_IN_NONPAGED_AREA

  STOP: 0 X 00000050 (0XFFFFFADE560F2690, 0 X 0000000000000000, 0XFFFFFADE5B2A9D18, 0 X 0000000000000000)

  fltMgr.sys - address FFFFFADE5B2A9D18 base at FFFFFADE5B2A0000, DATESTAMP 69305 45 d

  I tried a system restore is not working because it needs to stop (blocking at that time). It started after I installed Wildfire-Engineer/Pro 5.0

  I removed these files/programs in the hope that it would solve my problem, he doesn't. I can't find information on this other error then it is a file system that writes to the hard disk?

  Any help would be great.

  In addition, in each of the accidents the process that crashed was the avp.exe.

  AVP.exe is a process of Kasperksy.

  You seem to have an older version of installed Kasperksy then try uninstall Kasperksy and see if the errors to solve.

  Subsequently, you can reinstall using the latest version of Kaspersky or consider the alternative security such as Microsoft Security Essentials software.

• A blue screen (Stop error) has been reported. The message contains the error details.

  Hello Hello.
  can someone help me why this error is coming.
  I use a laptop lenovo.
  Error details:
  product-windows stytem, operating
  ID-1003,
  source-system error,
  version - 5.2.
  sysmbolicname-ER_KRNLCRASH_LOG,
  error code %1, %2 parameter %3, parameter3 %4 parameter 4 %5 2 parameter1

  A blue screen (Stop error) has been reported. The message contains the error details. An event with event ID 1001 might also appear in the event log. This matching event displays information about the specific error that occurred.

  Concerning

  Chandra Murali

  .net developer,

  HYD.

  Hi Murali,

  ·         What is the random question?

  Try the following.

  Method 1: Check for memory questions

  Microsoft Online Crash Analysis - windiag

  Method 2: Updated with the latest chipset and other computer device driver updates. Log in the Web site of the manufacturer to do the same thing.

• I lost the administrator password and I trie to install a new xp OS, and then displays the blue screen stop error 0x000007e

  My pc has the administrator password, I don't remember and I trye install new xpOS pc will not let me install what can I do for the eraser to erase the password

  Hello

  KB330182 article on 'error 0x000007e stop' from Microsoft are:

  "How to troubleshoot a Stop error 0x0000007E in Windows XP:

  http://support.Microsoft.com/kb/330182/en

  try to look if this could help you.

  LC

• FIX: STOP error 0x0000007E (0xC0000005, changes, changes, changes) of the last three parameters change

  I installed Norton Internet Security 2010 on a Windows XP SP2 computer... during a full scan of the system and browsing the internet the computer froze... he needed to force a shutdown down... in 10 sec power button... started as a new profile in the same pc... computer froze during the scan of Norton and navigate on the internet... we had to force quit... now When we try to start the PC we get the BSoD (blue screen of death) with the error code...

  STOP: 0X0000007E (0XC0000005, 0X812FD562, 0XF99A77EC, 0XF99A74E8)

  weird... but... seems the last three parameters are always changing at the start... There is no given name (SOME_THING_IN_ALL_CAPS) error... Here's what I've tried so far...

  -restart of the last known configuration of the work

  -starting in safe mode

  -boot in dos mode

  -went out and reset the memory chip

  -removed and put back the battery

  ... which none worked.

  Any ideas?

  Hi HyperD,

  Follow the steps in the article mentioned. The article presents seven methods to solve the problem.

  Settings and filenames in this error message may vary depending on the cause of the stop error.

  Link: How to fix a Stop error 0x0000007E in Windows XP:http://support.microsoft.com/kb/330182

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• STOP errors and gel on WinXP Home on Pavilion laptop

  Hello

  I'm having a problem with a laptop HP Pavilion ZT3000. I started to have errors of random stop (STOP 0 a, 4th STOP, STOP C1) or the computer just freeze.

  I did a check through the memory with Microsoft memory diagnostic, as well as MemTest86 +.  No errors not found after vigorous testing.

  I also checked the hard drive for errors. After a test is important, some not found errors.

  I can't measure the temperature of the CPU with a software like many downloadable programs do not read the temperature of the CPU of this HP Pavilion chipset platform.

  I have completely deleted the computer and installation of Windows XP from scratch. Subsequently STOP re error - manifest.

  I even tried to install Windows 7 on this system, but which did not succeed because there aren't has no drivers for many functions on Board (WiFi, sound, etc.).

  What else can I do to try to resurrect the Windows XP operating system for this laptop? I wouldn't like it undesirable because of these stop errors. In safe mode, the computer plant to the same extent, but safe mode isn't as usable as Normal XP mode.

  Thank you

  Mike

  Please provide additional information on your system and we'll see what your BSOD have to say for themselves.
  What is your version of XP and the Service Pack?
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  The afflicted system has a CD/DVD drive work?
  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?
  Click Start, run and enter in the box:
  Msinfo32
  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.
  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.
  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.
  This will minimize back Q & A and eliminate guesswork.
  Download BlueScreenView here:
  http://www.NirSoft.NET/utils/blue_screen_view.html
  Unzip it and run it (BSV installs nothing) and let him complete the digitization of all your crash dump files.
  If you double-click on depressed, you will get information on it (including the field caused by the driver) and you should be able to spot the problem right away - especially if you see a model in landfills where Caused by field pilot is the same (beginning with this driver).
  Select (highlight) one or more of the most recent dump files by clicking on them and hold down the CTRL key to select multiple files.  Try to select only the most recent links that relate to your problem (perhaps five or six to start dump files).
  Click on file, save selected items and save information from the dumps to a text file on your desktop called BSOD.txt.  Open BSOD.txt with a text editor, copy the text and paste it in your next reply.
  Here's an example of report ASB to a single BSOD I initiated on purpose that indicates the cause of the accident as the pilot i8042prt.sys belonging to Microsoft Corporation:
  ==================================================
  Dump file: Mini062110 - 01.dmp
  Crash time: 21/06/2010-11:51:31
  Bug Check String: MANUALLY_INITIATED_CRASH
  Bug check code: 0x000000e2
  Parameter 1: 0x00000000
  Parameter 2: 0x00000000
  Parameter 3: 0x00000000
  Parameter 4: 0x00000000
  Caused by the driver: i8042prt.sys
  Caused by the address: i8042prt.sys + 27fb
  Description of the file: i8042 Port driver
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 5.1.2600.5512 (xpsp.080413 - 2108)
  Processor: 32-bit
  Computer name:
  Full path: C:\WINDOWS\minidump\Mini062110-01.dmp
  ==================================================
  Send information from 5 last memory dumps.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!