On the display screen has stopped working - no icons

Similar Questions

• On Windows 7, the screen flashes and goes black. It shows that the display driver has stopped working

  I have premium home edition of windows 7 I had a problem with my display driver. The screen flashes and goes black and then turns back on with a message in the bottom right of the screen that reads «display driver stopped responding, but recovered» It has also closed and restarted windows

  Hello

  First, download and install the drivers from the ATI site, if you have already done so, check the graphics card and cabin temperature by opening. This normally occurs when the temperature is too high. Or if a person has overclocked graphics card.

  Thank you

  Nitin Aswani

• My wife has a Mini IPAD and the touch screen has stopped working. If anyone has had similar problems and if so is there a cure?

  HHas someone at - he had problems with the IPAD MIni touchscreen unresponsive? If so, can we do anything to fix the prob?

  Try these standard troubleshooting steps in the following order:

  Reset: Press the home and power buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost.

  Catering: Connect your device to iTunes on your computer, backup, and then select factory restore.

  See here for more details on the restoration: https://support.apple.com/en-us/HT201252

  If none of these work your device could have developed a hardware problem. Contact Apple technical support: http://www.apple.com/contact/

• display driver has stopped working and recovered

  In my laptop, I get a message from the display driver has stopped working and my screen goes black and crash suddenly

  Details of my laptop are
  Compaq 620
  Windows 7 ultimate 32 bit
  Intel (r) Core (TM) 2 Duo CPU T6570 2.10 GHz
  Display map Mobile Intel(r) 45 Express Chipset Family (Microsoft Corporation - WDDM 1.1)
  Hitachi HTS545032B9A300 ATA Device driver
  Display Mobile PC screen 1366 * 768

  Help, please

  I would start by removing the current driver and installing the latest driver available.  (yours is 5 years old)
  

  
  

  "It is not a true crash, in the sense that the blue screen was launched only because the combination of material and video driver video was to be insensitive and not because of any exception processing synchronous".

  Since Vista, the components of "Timeout detection and recovery" (TDR) of the subsystem video OS have been able to do some really impressive things to try to find issues that would have led to the earlier OS like XP to crash.

  As a last resort, the TDR subsystem sends a video driver command "Please restart you now!" and wait a few seconds.
  If there is no answer, the BONE concludes that the combo of driver/hardware video has really collapsed in a heap, and it fires at this stop 0 x 116 BSOD.

  If playing with video driver versions did not help, make sure that the box is not overheated.
  Try to remove a side panel and a fan of big sector directly to the motherboard and GPU.
  Run it like that for a few hours or days - long enough to check whether the cooler temperatures make a difference.

  If so, it could be as simple as dust accumulation and inadequate cooling afterwards.

  I download cpu - z and gpu - z (both free) and keep an eye on the video time

  For more information please read this blog http://captaindbg.com/bug-check-0x116-video_tdr_error-troubleshooting-tips/  

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff557263%28V=vs.85%29.aspx

• SyncUp software displays the message "SyncUp has stopped working".

  SyncUp software displays the message "SyncUp has stopped working" what can I do to fix this? Thank you

  Hello

  1. what operating system are you using on your computer?

  2. What is the brand and model of your computer?

  3. it worked very well on your system before? If Yes, you did it all software or hardware change before the show?

  Method 1

  I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  How to solve the problem by running the clean boot in Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 2

  Uninstall and reinstall the software SyncUp.

  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Note: Uninstalling the software will erase all the data associated with it. You must redo all favorite and set up anywhere after settings put it back.

  THIRD PARTY WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  See the following help link:

  http://en.community.Dell.com/support-forums/software-OS/f/3526/t/19391777.aspx

  It will be useful.

• Display driver has stopped working during the game the Sims 3

  Original title: video card? With the Sims 3 ~.

  I bought the Sims 3 and downloaded yesterday. I have played since then, but then the game would freeze and tell me that this ialmrnt5 of display driver has stopped working. So I tried to fix it, and it did not work. Now, he tells me there is something wrong with my graphics card and Sims does not work yet. I keep going from one link to another tells me to download this and that and I don't know what I have to do. I want to be able to play my game, because it's expensive and I bought it only yesterday. Help, please. PLEASE, I BEG YOU.

  -Poprocks26

  I thought about it, are not even worry about this.

  I just needed an update from Intel. It works perfectly now. :]

• "the igxprd32 display driver has stopped working normally please restart your computer" on intel gma 3150

  "the igxprd32 display driver has stopped working normally please restart your computer" on intel gma 3150, especially when I run 3d games or install Skype 5 and start on this video than the above message appears please advise solution and oblidge. Thank you

  First of all, you're not telling the forum what version of Windows, edition and service pack level your system is running.  Please do.

  Secondly, there is no describe your system.  Tell us who makes your system and its model, if a packaged system.  If not packed, please tell us who manufactured your motherboard and model.  If your video card is another box and not originally shipped with the system, please tell us the manufacturer and model of the adapter.

  Finally and most importantly, please read 555375 Microsoft Knowledge base article, how to ask a question.

  Now, in general, unless your system has a card mother Intel®, you do not want to download an updated directly from Intel® driver.  If there is a system, you will want to download an update of the driver support from the manufacturer of your system model site.  If not packed, see web site for support of the manufacturer of the motherboard for your updated driver model.  If this isn't the case, a card mother Intel®, the reason for the not to load the Intel® GMA 3150 drivers from the web site Intel® is that there may be unhandled in the Inte® base drivers implementation changes.  Nor should download the drivers through Windows Update, except as a last resort.  If Windows Update contains an updated driver, check you motherboard of the system/website of the manufacturer for updates.  Be aware that some manufacturers/motherboard of the system (e.g. Dell) don't feel any economic incentive to keep the drivers/firmware to update if a motherboard system was abandoned.

  No member of this forum is omniscient!  Provide complete information leads directly to all the answers!

• G72-a20EM screen has stopped working after updating the BIOS F.48.

  How is it possible that BIOS update recommended could turn off the LCD screen.

  Currently I see almost anything on the screen, but vga port works. But increasingly,.

  Intel graphics card is not recognized.

  G72-a20EM screen has stopped working after updating the BIOS F.48.

  What can I do to fix that?

  Good news!

  I found the working version, and it is version F.08.

  Supposedly new version have different Active cables, and this is the reason why the screen is dark.

  So, case closed, everything is perfect.

• Satellite M50D-A-10W - display driver has stopped working while gaming

  Hey guys I just bought a toshiba Satellite M50D-A-10W and I have a very annoying problem...
  When I play in dota 2 sometimes I get a massage like: "display driver has stopped working" or answer

  I remember exactly, and the freezing of the game and then screen I need leave the game and reconect. If you can help me guys, I'll be very grateful

  Rare Hi

  This message is certainly created by the installed graphic card driver.
  I can't say for sure why this happens, but I recommend you to reinstall the graphics driver.
  In most cases, this should fix problems with gambling.

  Greetings

• U920T satellite screen has stopped working

  The screen has stopped working on a relatively new U920t. It displays second screen on the TV, but the actual screen shines in computer mode not all laptop or tablet.

  Any help in this matter would be appreciated.

  > It displays second screen on the TV, but the actual screen shines in computer mode not all laptop or tablet.

  This means that there is nothing wrong with the graphics chip on the motherboard, but without doubt the connection between the screen and map mother isn t OK or maybe the internal display is faulty.

  Is that it is a hardware issue and you should contact Toshiba authorized service provider in your country for repair.
  If the warranty is valid, the laptop must be repaired for free.

  Welcome them

• Satellite A100 - screen has stopped working

  Hello

  yesterday in vista, he said that he detected an external monitor, even if I never used any external monitor to my laptop. In display properties, he said I had several monitors and in Device Manager it says that I had a pnp and a monitor not Plug-and-Play...

  The screen has stopped working after a reboot. I see nothing on the screen during the loading process indicating normally the toshiba and the vista loading screen. But once vista has started (the sound still works), the screen works again.

  This has me worried and I reinstalled vista from the cd, but now the screen never... never.
  But I know that vista has been correctly installed that after what he asked, can I still use alt + f4 and enter to stop.

  Well, I can't even make troubleshooting procedures on my own that never, the screen now works. -.-
  Does anyone have experience with this?

  Hello

  I've never heard of such question it s so very interesting to hear about this issue. Given that you never connected an external monitor, it must be something else...
  Did you ever done some update the BIOS on this machine?

  Maybe, if you have some, this could be the problem. Otherwise, I have a work around (it could be useful):

  Remove the AC adapter and the battery from the machine and leave the machine for some time (1-2 hours). Then, start the machine and check if it works.

  If this isn't the case, then you must send your machine to the service since it could be a serious hardware problem (I mean if you really reinstalled vista and problems persist after the reinstallation, then it IS definitely a hardware problem).

  You can also try some update BIOS if it is not already done...

  Welcome them

• Satellite M70-340: display driver has stopped working

  HI, I BOUGHT ALL NEW LAPTOP FROM DUBAI THE MONTH LAST. HIS GIVING DISPLAY PROBLEM BEGAN THE IALMRNT5 DISPLAY DRIVER HAS STOPPED WORKING NORMALLY. MUST RESTART TO COMPLETE SYSTEM RESTORE"

  I DID ALSO DRIVE FORMATTED, REINSTALLED PREDRIVERS. BUT IN VAIN.

  ADAPTER IS INTEL! ATI DOES NOT INSTALL!
  DON'T KNOW HOW TO TO THIS TOPIC AND NOW IT JUST BEDS ONLY BLUE POWER LIGHT AND CRASHES ON STARTUP WITH SCREEN WHITE!

  PLEASE SUGGEST...
  CONTACT on [email protected]

  Hello

  If the reinstallation of the system with the recovery CD does not help, then it is not a software problem.
  This means that some hardware component is defective.
  In this case, you need to take your laptop to the service.

  Good bye

• Need help, get message display driver has stopped working, but has recovered

  Had no problems until recently, my freezer of mouse and screen, then get message display driver has stopped working, but recovered it gets really bad, please help

  Hello

  1. what operating system do you use?
  2. What is the brand and model of your system?
  3. Once you get this error message?
  4. you did it before the issue of any material changes or software?

  Try the steps outlined in the methods mentioned below and let us know if it helps.
  Note: The following Microsoft Articles are applicable for Windows 7 and Vista.

  Method 1: Boot your system in clean boot mode and temporarily disable your antivirus software. Check if get the same error message or not.

  Step 1: Try now to the KB article to perform the clean boot:
  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7:
  http://support.Microsoft.com/kb/929135
  Important: After you used the clean boot in order to solve your problem follow step 7 to reset the computer to start as usual.

  Clean boot in XP:

  Try now to the KB article to perform the clean boot:
  http://support.Microsoft.com/kb/310353
  Important: After you use the clean boot in order to solve your problem follow the steps in the "steps to configure Windows to use a Normal startup state" section to start your system in normal mode.

  Step 2: Turn off the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Method 3: update the driver for
  

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 4: Please visit the manufacturer's website and download the latest driver for your graphics card.

  Method 5: Windows 7 power save settings reduces the voltage to the video card too well when it is inactive for some video cards.

  To resolve this problem, disable the display (Plugged In) turn it off and turn off the display (on battery) power settings by using one of the following methods:

  Use the Group Policy settings:
  To resolve this issue by using Group Policy settings, follow these steps:

  (a) click Start, type gpedit.msc in the search box and press ENTER.

  (b) in the local Group Policy Editor, expand models of administration under Computer Configuration, expand System, expand power management, and then click display and video settings.

  (c) in the dialog box that opens, double click on turn off the display (Plugged In), click active, type 0 in the box to turn the display Off (seconds), and then click OK.

  (d) in the dialog box that opens, double click on turn off the display (on drums), click active, type 0 in the box to turn the display Off (seconds), and then click OK.

  Use the powercfg command:
  To resolve this issue by using the powercfg command, follow these steps:

  (a) click Start, type command prompt in the search box, and then click command prompt in the list of results.

  (b) at the command prompt, type the following commands:
  powercfg - X-monitor-timeout-ac 0
  powercfg - X-monitor-timeout-dc 0

  Get back to us if the problem persists.

• error msg, "ialmrnt5 display driver has stopped working normally."

  Hello!!!

  I use an old PC configuration, windows xp Intel 845 G, for several days that I get an error msg whenever I try to run mp4, .mvi and many other video files saying: "ialmrnt5 display driver has stopped working normally. Save your work and restart the system. the size of my screen becomes huge and icons on my desktop... expand please suggest a way out for remedy.
  My email ID.
  E-mail address is removed from the privacy *.

  Hi Moiz,

  Thanks for posting your question in the Microsoft Community.

  This problem can be caused if the display drivers for your computer is damaged.

  1. What is the brand and model of the computer?

  2. have you made any recent hardware or exchange of software on your computer before the show?

  Follow the steps in the link.

  Windows stops responding and you receive an error "display driver has stopped working normally":

  http://support.Microsoft.com/kb/328071#appliesTo

  I also suggest you to update the display drivers for your computer from the links.

  https://Downloadcenter.Intel.com/default.aspx?lang=eng

  http://www.Intel.com/design/chipsets/datashts/290746.htm

  If you need further assistance on this topic, let know us and we will be happy to help you.

• Satellite L500D-144 - CCC of the host Application has stopped working

  Ladies and gentlemen,

  My PSLT6E - 007004GR is almost a year.
  This month, there was an update - possibly to leave Microsoft - and since then popt always at startup in Windows 7 this window and look for solutions:
  Catalyst Control Center. The host Application has stopped working, it is looking for a solution.

  A new installation of the driver graphics card and Catalyst Control Center has not changed. Instead, a standard Microsoft graphics card driver is installed.
  Reset of the system for the month of October has also asked nothing, after fresh updates, the problem recurs.
  Is it reproducible.

  Have already reported more customers or I'm the first?

  What can you do to the problem?

  Sincerely,

  CBluebaerchen

  Hello

  > Reset of the system for the month of October has also asked nothing, after fresh updates, the problem recurs.
  To do this the display of Windows Update driver update?

  If so, restore the system to an earlier point and disable this update of the display driver and choose only the updates of Windows. That s enough.

  Otherwise, you can try running CCleaner. It can clean and fix registry problems.