On the portal statistics

Similar Questions

• iPod Nano is not synchronize or send workouts on the portal of Nike

  I have an iPod Nano and up to a week or two ago when Nike changed their entire portal (which I am already Livid about because 'if it ain't broke, don't fix it") workout of my iPod Nano is no longer synchronize or send the portal of Nike + at all.

  I received continuous error messages and they have yet to fix.  However, they have not run before release products even if existing ones is glitching out.

  Any help would be appreciated, thanks.

  The web site Nike + was revised a few months ago.  I like the old better version also...

  Since the revision, when I sync my iPod nano and it has new workout data, I get an error message.  I my case, clicking the button OK in the error message allows the synchronization to continue, and iTunes sends my new workout data to Nike + (despite what the error of not being able to connect to Nike +).  I get the usual message of confirmation.

  In your case, Nike + receive your new workout data?

• Cannot connect to the portal

  Keep my past is connected to the Web site through my watch, but I can't connect anymore.

  He tells me I have no valid credentials, but they seem to work the W450. I just use my user name to connect to the forums!

  Anyone else with this problem?

  Was finally able to connect the portal a few minutes ago. All is well for now.

• The bugs of the portal will NEVER be fixed?

  Seriously guys... The portal is the biggest problem with the W450 in my opinion. Please something soon out! .. .and let us know when you do.

  We expect two updates portals this month. The plan is to completely redo the intervals and zones, as well as fixing annoying bugs. Portals updates will be underway after may as well.

• Remote clients are denied access to the portal...

  We're having sporadic problems with remote clients are denied access to our portal, they do not even have a login prompt.  We use a SRA 4600 with SonicOS SSL - VPN 8.0.0.3 - 23sv but have see on 8.0.0.1 as well.

  Journal entry:

  Threat of prevented WAF: Injection SQL 1 attack
  More details

  Entry matching: _ga = ga1.2.676072112.1440205737; _dc_gtm_ua-21325736-1 = 1
  Threat: SQL Injection attack 1
  Threat ID: 9005
  Description: SQL Injection is a technique of attack used to exploit websites that construct SQL statements from user-supplied input
  URI: remote.ncmic.com:443/
  Agent: Mozilla/5.0 (Windows NT 10.0;) WOW64; Trident/7.0; RV:11.0) as the Gecko

  The field 'entry matched' is not indicative of the entry that is triggering the signature. There would be something else, we need to study. Can you please make a ticket and we provide access to the portal so we can try to reproduce it?

• SRA 4600 Web Application Firewall blocks access to the Portal login page.

  We have a 8.0.0.1 - 16 4600 running and run the Web Application Firewall.  We had a few reports of users home that our portal page was not available, only tried IE, but everything went well here.  Today we had an internal machine with the same question and noticed that it was blocking WAF access: "threat of avoided WAF: Injection SQL 1 attack" you can see nothing wrong with this machine that may be cause the WAF to block the Portal login page.  Here are the event log:

  "Jun 10 09:34 sslvpn1 SSLVPN: id = sslvpn sn = C0EAE4745184 time =" 2015-06-10 09:34 ' vp_time = '2015-06-10 14:34 UTC' pri fw = xx.xx.xx.xx = 2 m = 34 c = 402 src = dst = xx.xx.xx.xx xx.xx.xx.xx user = 'Unknown' usr = 'Unknown' msg = "prevented WAF threat: SQL Injection attack 1 ' URI=remote.ncmic.com:443/ rule-match =" _ga = ga1.2.1366358136.1433946841; " _dc_gtm_ua-21325736-1 = 1 "AttackCat = 'SQL Injection attack 1' somm ="SQL Injection is a technique of attack used to exploit websites that construct SQL statements from user-supplied input,"hamid = category '9005' = 'command execution - SQL Injection' agent =" Mozilla/4.0 (compatible; " MSIE 7.0; Windows NT 6.1; Trident/7.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; Media Center PC 6.0; NET4.0C;. NET4.0E; Tablet PC 2.0)' geoCountryID = '0' geoCountryName = 'LAN' geoRegionName = 'unknown' geoCityName = 'unknown '.

  Other machines can access the page without problem... thoughts?

  Can not reproduce this problem at the moment...

• Signed bar rejected when downloading on the portal

  I am trying to download a signed request on the portal vendor for a new version, but everytime I download it I get the following error: was rejected. File BAR ("AppName.bar'") BAR file is not signed as required.  I recently reinstalled momentics and retrieved my keys via my BlackBerry Portal login.  Here's my current version of the application.

  Java: 1.8.0_73

  Momentics: 2.1.2

  BlackBerry API: 10.3.1

  Is there a way to verify that the package is signed correctly signed from the command line?  I am running Windows 7.

  Nevermind, I had mixed my old references with the new.

• New on the portal provider, digital goods. App update of doubt!

  Hi guys,.

  I'm new to the forum so please be kind if I am not aware of the rules here. I'm new to getting started with selling digital products from the supplier portal. I created a sample application using the AIR, like the BB dev portal. I've also added a new goods (consumable charge .99cents) in the portal provider (draft mode). I added the user sandbox to my account. I opened my Z10 account connected to BBworld with developer on mode. I'm in the content ID and looked content, the app mentioned that he is "not available for this device.

  I have some doubts.

  1. how to connect using the user account of bac to sand? Should I use a different device linked to the same BBID?

  2. why the content is "not available for this device?

  3. can I simulate purchases by using the 'PaymentSystem.CONNECTION_MODE_LOCAL '? I see the UI with the purchase ID and response on the 'success', but 'purchaseSuccessHandler' is not have triggered.

  My final question is,

  4. I'm planning store xml data and other assets in the appStorageDir once the user makes the purchase. Now, what happens if I update the application? The xml in the appStrorageDir file will also get deleted? How to maintain existing data when the user updates the application?

  Sorry for the long post amateur. Help is very appreciated.

  Thank you.

  1 see the following page for information on test applications with a user sandbox account.  You want to make sure that your digital good is approved / available, even if your version of the app is in draft mode.  Make sure to clear cache in BlackBerry World once you have downloaded your application on the portal of the seller.

  2. sometimes, this error occurs if you load the app (from your dev machine) side and try to buy a digital camera right.  The payment service requires that the application be downloaded from BlackBerry World in order to make digital good purchases.  If side you load it, you will get probably errors.

  3. I don't know why purchaseSuccessHandler will not fire.

  4. There is a shared folder on the device that you can place the application in legacy.  If the application is removed, the assets would persist.  You are right, that if you store your goods in the storage location of local file for your application, it will be deleted if a user deletes the app.

• Already registered on the portal OnPlus - cannot add a device already enabled/customer

  Hello

  I am registered on OnPlus.

  Then my colleague registered and activated a device.

  I could not activate the device - even if my PC is on the same subnet and can connect to it very well (with the password provided by my colleague).

  When he sends me an invitation for the device - it takes me to the registration page.

  If I get my information from record (again) - I get (not surprisingly)...

  "We had a problem with your submission. Please correct the following errors. This user ID is already registered. »

  Still-, there is no choice because "I am already registered.

  When I connect OnPlus and try to "Add Customer" - I put in the details, then it goes to the activation screen with

  "CustomerX / status".

  To activate this client:

  Install the Agent network OnPlus on the premises of the customer and connect it to the LAN client.

  Turn the Network Agent OnPlus the switch zipper on the back panel of the Network Agent OnPlus.

  If your computer is connected to the same network as the network OnPlus Agent, click on the button activate now below.

  Otherwise, follow the instructions for activation in the guide getting started for the Cisco OnPlus Network Agent.

  Activation for this customer information are:

  Activation ID:... »

  If I click on activate it says

  "Unable to determine a local IP address for all Agent OnPlus of network into your current network.

  Check that the Network Agent OnPlus is connected to the same local network as this browser. OnPlus Network Agent must be on the same public WAN IP address (203.25.x.x) in your web browser block current.

  Not enabled OnPlus network Agents will attempt to disseminate their IP up to 30 minutes and if successful will appear here for 4 hours. Try to stop power OnPlus Network Agent if it has been online for more than 30 minutes.

  Verify that the DHCP service is running on the local network so that network OnPlus Agent is able to acquire an IP via DHCP. You will be able to change Agent of the OnPlus network to use a static IP address if you choose to (recommended), but the DHCP service is required to access the Network Agent OnPlus start.

  Ensure that DHCP clients can route to the Internet.

  If the Network Agent OnPlus hosting site has multiple WAN paths to the Internet, try refreshing this page. Your browser must Access this page from the IP WAN as the Agent of OnPlus network address. »

  We even tried power cycling it, and I'm definitely on the same subnet.

  There was no possibility of entering an IP address no matter where manually - process regarding the "Impossible to determine an IP address local for all Agent OnPlus network on your current network."

  I ping the device and even connect to its graphical interface. It simply does not appear as any way to add this unit to my own account on the portal OnPlus.

  That please?

  Hello Brett.

  The On100 device can be associated with a single customer and a customer cannot exist in more than one Agent account. From your description, I understand that your colleague registered as a OnPlus Agent, created an account customer, and then active the On100 device under this new client.

  However, it is possible for you to have access to the customer site by becoming a sub-agent under account OnPlus Agent of your colleague.  And according to the description above, it seems that your colleague has already sent you an invitation to become a subagent.  The problem now is that you have previously registered your EAC as OnPlus Agent id.  It is not possible for a single CCE id or an Agent and a secondary agent in the OnPlus portal.

  To allow your registration as sub-agent, we remove your EAC to your portal id.  It is a manual step that I am happy to help you.  Simply unicast your Agent account information to [email protected] / * / .  Once I take off your CEC id you will be OK to complete the registration of subagent.

  Here's some more information about the creation of the sub-agents in the portal OnPlus.  A previous post jamwyatt courtesy of response:

  In the account that contains the Agent network ON100, you can add other agents, on invitation. On the overview page, there is a menu agent at the top that will allow you to invite the officers. Once you invite an agent, and they sign up, they will be able to see the same view you see. The design intent is that you set up a master account for your business, then you invite other employees and contractors to adhere as agents of this account. Each guest will need a Cisco ID and once that they sign up, they will have to be approved by the owner of the main account (same menu agent, selection "of Agents in waiting"). Using this approach, the owner of the company retains the main account and allows you to manage completely all agents.

  Kind regards

  -r.

• Add user access to the portal

  Hello

  I have the role of Managing Director on the portal how can I add colleagues more access to the portal, also how to give access to users customers

  Hi Marc,

  Here are the steps to grant access based on roles on the portal of the NMP, please go through this document.

  https://supportforums.Cisco.com/document/12583596/adding-new-users-smart-net-total-care-portal

  Thank you

  Anusha.

• NOT able to do anything in the portal of total care Smartnet

  I was trying to use the portal for a while, but after following all the instructions I found is not working. I have recorded one got access to the web page. I have install the collector, collect and send the information, but that inventory never appear.

  In the portal home page, I do not see my contract, I can even not able to import the csv file. I don't have the option. I don't see the State of downloaded inventories. All I can do is add dashboards.

  Can someone guide me to know what is the problem?

  Thank you

  Hi Gustavo,

  Thanks for joining us, could you please send us the screen turned to the identification of email - [email protected] / * / only to proceed further on this situation.

  Kind regards
  Pamela

• Customization of the Portal helps ASA

  I am trying to modify the help file for the web application, but it doesn't show any changes, I went the customization assistance under the portal, imported html file and save the config. But always in the browser, is to show the old help content of the file. How to do this?

  Thank you

  Yes, this seems to be correct.

  Here are the steps documented for your reference:

  http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a008094abcb.shtml#helpapps

  You choose the appropriate language? as well as the correct file name (web-access - hlp.inc)?

  What version of ASA and ASDM?

• How can I make a tab by default whenever I have connection to the portal of the webcenter spaces?

  Hello

  I have a single page in the portal of webcenter spaces, which is the default portal in the webcenter application. This single page has 6 or 7 like Home tab and the other tabs. Whenever I logged in the webcenter I can see the url redirects to my default portal but it doesnot get home tab made, instead, it shows the tab where I left just before disconnected tab.

  For example I have tabs A, B, C, D etc... I have logged in to the application portal and I did something in tab C and then I logged. After once again I re-login, I see this tab C shows, but I want to see that tab must be returned. Someone help me how to make a tab by default whenever I have connection to the webcenter portal.

  Thank you

  Ashok Laura.

  Hello

  This is an expected behavior as his persists the State of users. I did face this problem before and solved by setting the disclosed condition of showditailitem programmatically.

  Please check below the code for your reference.   Invoke the bean managed prior to the loading of the page to

  {} public void onPageLoad (PhaseEvent phaseEvent)

  If (phaseEvent.getPhaseId () .equals (phaseEvent.getPhaseId (). RENDER_RESPONSE)) {}

  If (!.) {AdfFacesContext.getCurrentInstance () .isPostback ())}

  If (this.newsPanelTab! = null) {}

  List childUIComponent = this.newsPanelTab.getChildren ();

  If (childUIComponent! = null & childUIComponent.size () > 0) {}

  for (int i = 0; i)< childuicomponent.size();="" i++)="">

  If (childUIComponent.get (i) instanceof RichShowDetailItem) {}

  If (i == 0) {}

  ((RichShowDetailItem) childUIComponent.get (i)) .setDisclosed (true);

  } else {}

  ((RichShowDetailItem) childUIComponent.get (i)) .setDisclosed (false);

  }

  }

  }

  }

  Thank you
  Amey

• Pages system is empty in the portal

  Using webcenter Portal 11.1.1.8.0.

  Trying to change my login page, am by following the link below to do so.

  http://matteoformica.blogspot.de/2015/10/how-to-customize-login-page-in.html

  My system page shows empty.

  Someone kindly guide me how to change the login page.

  Hello Prasad,

  Please check below for reference.

  https://docs.Oracle.com/CD/E29542_01/WebCenter.1111/e27738/wcadm_ps_syspages.htm#WCADM11276

  Its looks like you connect with weblogic which is by default for defaultauthenticator.

  Do you use the MobiLink external authenticator? If yes add user to the external directory and then add specific user of the external directory as administrator for portal

  https://docs.Oracle.com/CD/E29542_01/WebCenter.1111/e27738/wcadm_ps_security.htm#WCADM11568

  Also please update Diagnostics logs when access you the portal application system pages.

  Thank you

  Amey

• Cisco authentication at the portal comments disabled ISE

  Hey you...

  How to disabled authentication in portal invited to end users? Is it possible? We have customers who have the laptop with group policy, which allows to not show my feedback portal.

  TKS

  I do not understand your question... they have a GPO that prevents the user to see the guest SSID?  If so, you can't do something about that and have remove this restriction of group policy.  If you're talking of end-users did not pass by the portal page, then your is it connect to other SSID or circumvent your doing a mac.

  Scott