On which the sbRIO 9602

Similar Questions

• Connect the sbRIO amulet monitor

  I have programmed my amulet display and have a VI RT on my 9636 sbRIO which must communicate with the amulet.  I have the amulet the sbRIO-related uses the USB port.   I also installed the software on my sbRIO:

  (1) NI-VISA 15.0.0

  (2) passport OR VISA-USB 15.0.0

  When I run the RT.VI, it is not the USB port on the sbRIO.  I guess I'm missing some software on the sbRIO but can not understand.

  Thank you

  Craig,

  To dispel confusion, you shouldn't see your amulet device in MAX, you should see the sbRIO. In addition, you cannot communicate via USB between the sbRIO and amulet device, but you can communicate over the serial (RS232).

  You are right in saying that you are missing on the sbRIO software because there is not a driver for the sbRIO use USB.

• Best option for mass deploy application on sbRIO-9602

  Hello

  I need to deploy the application to a large amount of LabVIEW rt ' sbRIO-9602. What would be the best way to go about this?

  All RIOs will have an identical configuration.

  Pilots on the RIO software must be upgraded to the latest version.

  Downloaded bitfiles FPGA.

  Created folders and files downloaded via FTP.

  All resources specific I should look?

  Take a look at this .

• When bookmarking a page, I get the full list of files in the drop-down list to select any folder in which the bookmark page. What you set for complete list of folders in the bookmarks falling?

  When bookmarking a page, I can not get the list of files to drop down to select any folder in which the bookmark page. The "folder:" bar was showing "Bookmarks Menu". The arrow on the bar descends 5 recent folders which pages were saved, but pop arrow to the right of the bar down opens just to show the three categories and the button "new folder". What you set for complete list of folders in the bookmarks falling?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).

  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  See also http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

• Attempt to add a "new target or device', but the sbRIO 9607 is not listed

  Hello

  Just upgraded to 2015 LabVIEW and CompactRIO 15.0.

  Also used the Service to update OR install the patches for 2015 of LabVIEW and CompactRIO device drivers.

  I'm trying to add a target in LabVIEW in the window "add targets and devices." I select 'new target or device' and develop the sbRIO options. I see a lot of targets, but unfortunately the sbRIO-9607 does not appear. It simply isn't.

  

  Thoughts? When I'm back in the office on Monday, I'll try a repair of the driver.

  Best,

  Dan

  Well, this is embarrassing, but I don't know I'm not the first and won't be the last to commit this error.

  I had accidentally opened LabVIEW 2014 SP1 instead of 2015 of LabVIEW.

  Of course, it works in 2015 from LabVIEW. Congratulations if you guessed this might be the problem.

• How to access the sbRIO DIO pin

  Hello

  How to access the pin the sbRIO DIO.

  I enclose the code. According to the code of the indicator DIO2 is supposed to blink, but it is not happenning. Can someone please review the issue and let me know (ASAP) where I was wrong?

  P.S Its URGENT!

  Your FPGA code is more complex that it should be.  Something like this will do what you want.

  

  Now your RT code... You are simply flashing the fater LED that you can see.  While some expected between your output setting.  I would also use a shift register to store the current value and then just reverse.  In this way, that you have only 1 entry per loop.

  

• E/s and the issue of Communication for the sbRIO-9601

  Hello

  Our company is looking to use the sbRIO-9601 in an OEM application and I had two technical questions on the Board of Directors.

  (1) are the functions VISA support?  I saw there an RS232 port, I want to just make sure I can read/write easily out of it using prebuilt VI rather than do all the level low and starting from scratch.

  (2) we will be reading and writing of simple commands to a device coupled via the RS232 interface and based on the response, illuminating an LED controlled by the Board of Directors.  I have not selected any led and hoped that neither could provide some clarification on the limits of the power provided in the sbRIO-9601 user guide.  We will use the 3.3V output... I should put a resistor in line current limiting or I can put the diode directly between the output pin and the digital ground?  Us can drive more than 15 LEDs, however, we will never more than 3 see on at any given time.  I saw in the 3.3V section i/o of the documentation that the current max tested per channel is 3mA... but bus total is 330mA.  Is there a limit to how much we can provide each channel as long as we remain under the 330mA all together?

  Thank you

  Hi leachdor,

  (1) VISA functions are supported for the RS232 port on the sbRIO, so do not do any level low programming for them.

  (2) the maximum that we specify channel 3 is my.  You can combine several channels in parallel to increase this output up to 330 mA for the total bus.  Since you're only driving 15 LEDs and there are 110 channels of output, you should be able to combine some led.

• Moving the sbrio 9606 FLASH files

  I'm trying to move files in main memory or flash my sbRIO.  I followed the example in this link just to find out where c: / is written in too.  It turns out that I can write only to c:\ni-rt\ and that works (c:\ does not seem to work). I am able to ftp by opening a Windows Explorer and tpying in ftp://adresseIP and see the file.  I guess I can use a FTP tool like filezilla to move my files in this site under my own directory and work with them.  This is to support the hexagonal flashing device and start with the files.

  But how you search for a file on the flash drive?  I saw a reference to d: /, but what is the ftp://adresseIP?

  I don't know there is a documentation on what I can't find it.

  Thank you

  -SS

  Hi Simon, shooting

  You try to access a plug in USB Flash drive plugged into the USB port of the sbRIO-9606 via the FTP client?  It is possible and is documented here: using FTP to access and use the external CompactFlash or USB on a real-time controller

  CompactFlash drives (if any) should indexes to drive D:\ letter and USB readers must index starting with the letter of player U:\

  If the documentation above is not what you are looking for, then I'm not sure what you're trying to do, or where you have a problem.  An FTP client must be able to navigate to files on the file system of RT, including something like Filezilla, Windows Explorer, the FTP client included in Measurement & Automation Explorer.

  See you soon,.

• Access to the files of the network by which the user

  Hi all

  I have win 2003 Server Active directory and win 2008 Server files. And this win 2008 Server system folder shared on the network. I have 10 reviews with all permissions on these files. But a certain keep to delete certain files and folders. How the leaflet which the user made this thing. kindly help me on this.

  Thank you

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• I have an email stuck in my Outbox which the recipient is constantly receiving & I'm unable to remove, what can I do?

  I have an email stuck in my Outbox which the recipient received 10 or 11 times a day. I can't delete this mail in the Outbox, although I tried several times. I have no removal icon that appears in the Outbox options, as in the other settings of the mailbox. I don't know how to stop this message. Can you please help?

  [Moved from comments]

  1. Version of Windows?
  2. E-mail program?
   
   

• How can I change the directory in which the analyses are placed on my computer?

  How can I change the directory in which the analyses are placed on my computer?

  GAS - 121 wrote:

  How can I change the directory in which the analyses are placed on my computer?

  Select HP Scan.  Select Advanced settings.  Select the Destination tab.  Select the save location.

• Purchase a new sealed copy of the upgrade of Windows Vista Edition diskette Home Premium. I found one on which the label says "for distribution in the United States / Canada only. Will this work without problems on a PC in the United Kingdom

  "U.S. / Canada Distribution only" disk for use in the United Kingdom?

  I want to buy a new copy sealed the Windows Vista Edition upgrade disk Home Premium. I found one on which the label says "for distribution in the United States / Canada only. Will this work without problems on a PC in the United Kingdom please? Thank you.

  Hello

  Yes, it will work. However I recommend to buy the disk to upgrade of the United Kingdom.

  The Windows Vista DVD upgrade that you get in the United Kingdom is different from what they get in the United States.

  Please follow the link menitoned.
  Choice of installation for consumer versions of Windows Vista (32-bit only)
  http://support.Microsoft.com/kb/932616
   
  I hope this helps.

• I have a pavilion with Vista m9457c. Recently, it developed a problem in which the mouse or the keyboard you wake the computer from sleep mode more.

  I have a pavilion with Vista m9457c.  Recently, it developed a problem in which the mouse or the keyboard you wake the computer from sleep mode more.  I knew that the fan on the video card was bad, so I replaced the video card.  This does not solve the problem.  I did so that the keyboard and mouse could get the computer from sleep mode, but it is still not correct the problem.  If I let the computer to sleep, nothing happens when I move the mouse or press the Crescent Moon on the keyboard.  The screen remains dark.  Then I have to physically press the power button / stop and return to restart the computer. Help me, Obi - wan!

  Hello

  You can read the folloaing articles and see if it helps.

  The problems of wake the computer from sleep mode

  A Windows Vista-based computer resumes the mode not sleep if you move or click a USB mouse as the computer is switch to sleep mode

  Hope this information is useful.

• PC Windows 7 on an area in which the reset default printer will be not.

  Original title: need to constantly reset the default printer

  I have a Windows 7 pc on an area in which the default Reset printer will not hold.  You constantly reset.  No idea how to hold?

  Hello

  If your system is connected to a domain, the question you posted would be better suited for the IT Pro TechNet public. I would recommend posting your query in the TechNet Forums to get help:

  TechNet forums various Windows 7

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Error message: "Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. »

  Original title: problems of residential group after system recovery

  I started a homegroup on my computer.  I added another computer to the homegroup.  Everything worked fine until I had to perform a system recovery on the laptop that I used to start the homegroup.  I implemented the homegroup again, but I can't access the files on the other computer via Windows Media Player.  I get an error message that says "Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. "I can access all the music files via Windows Explorer.  I have to start over with a new password?  Can I just create a new homegroup?  What other options do I have?  You can provide any help would be greatly appreciated.  Thank you.

  Hello

  Please follow the methods and check the issue:

  Method 1:

  Open the homegroup troubleshooting utility:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  Method 2:

  Why can't I access my homegroup? :

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-access-my-HomeGroup

  For reference:

  Homegroup: frequently asked questions:

  http://Windows.Microsoft.com/is-is/Windows7/HomeGroup-frequently-asked-questions

  Method 3:

  See the steps in "include a folder shared in a library" from the link below:

  Access to files and printers on other homegroup computers: http://Windows.Microsoft.com/is-is/Windows7/access-files-and-printers-on-other-HomeGroup-computers

  I hope this helps.